Molecular Epidemiology and Antimicrobial Resistance of Extended-Spectrum ß-Lactamase (ESBL)-Producing Klebsiella pneumoniae in Retail Cattle Meat.

Enterobacteriaceae that produce extended-spectrum ß-lactamases (ESBLs) can result in severe human infections, contributing to the development of complex diseases. Klebsiella pneumoniae is one of the ESBL-producing pathogens that helps to set antimicrobial resistance as a major public health problem worldwide. The current study aimed to isolate, identify, and characterize ESBL-producing K. pneumoniae and their antimicrobial resistance pattern in retail cattle meat samples. A comprehensive set of 225 cattle meat samples was gathered from 13 upazilas within the Sylhet district of Bangladesh. The bacterial isolates were obtained through biochemical and cultural techniques, and the identification of K. pneumoniae was accomplished using polymerase chain reactions (PCRs). Antimicrobial susceptibilities were assessed using disk diffusion in accordance with the Clinical and Laboratory Standards Institute (CLSI, 2020) guidelines. Genes encoding ESBL enzymes were detected by the double-disk synergy test (DDST) and multiplex PCR. The overall prevalence of Klebsiella spp. was 28.89% (65/225), whereas the positive percentage of K. pneumoniae was 59.2% (29/49) confirmed by PCR. Antimicrobial resistance was observed against 12 antibiotics. According to the phenotypic resistance pattern determined through the disk diffusion method, all isolates (100%) were resistant to ampicillin, amoxicillin, cefuroxime, cefotaxime, and colistin. On the other hand, the highest susceptibility was observed towards gentamicin (97.95%), followed by ciprofloxacin (85.71%), tetracycline (83.67%), and trimethoprim-sulfamethoxazole (81.63%). Out of the total K. pneumoniae isolates analyzed, ESBL genes were present, and the highest percentage, 82.8% (24/29), tested positive for bla TEM genes. Interestingly, among the nine ESBL genes, six were identified in K. pneumoniae isolates, except for bla OXA, bla CTX-M-grp2, and MultiCase DHA. The study's results reveal the presence of extended-spectrum ß-lactamase (ESBL)-producing multidrug-resistant (MDR) K. pneumoniae in retail cattle meat samples posing a substantial public health threat.

Prevalence and factors associated with depression and anxiety among the Bangladeshi university entrance test-taking students using GIS technology.

This study focuses on Bangladeshi university entrance test-taking students mental health problems and explores the geographical distribution of these problems using GIS technique. A cross-sectional survey was conducted among 1523 university entrance test-taking students. Data were collected on participants' socio-demographic characteristics, COVID-19-related factors, admission tests, depression, and anxiety. Chi-square tests and logistic regression were performed using SPSS software. GIS mapping was used to visualize the distribution of mental health problems across districts using ArcGIS. The study found that the prevalence rates of depression and anxiety among university entrance examinees were 53.8% and 33.2%, respectively. Males exhibited higher rates of depression and anxiety compared to females, while repeat test-taking students were more susceptible to these mental health issues compared to first-time test-takers. Factors such as urban residence, personal/familial COVID-19 infections, and COVID-19 deaths in close relationships were associated with increased mental health problems. District-based distribution showed no significant variation in depression, but anxiety varied significantly. Post-hoc GIS analysis revealed variations in the distribution of depression and anxiety among males, as well as variations in anxiety distribution based on student status across districts. This study emphasizes the high prevalence of depression and anxiety among university entrance examinees, emphasizing the importance of addressing mental health risks in this population. It also suggests the need for reforms in the university entrance test-taking system to reduce psychological problems and advocates for a more inclusive approach to student admissions to alleviate mental health burdens.

Polytechnic students' perceived satisfaction of using technology in the learning process: The context of Bangladesh TVET.

Technology integration is becoming pervasive in the polytechnic institutes of Bangladesh. Many institutions opted for a blended learning approach to deliver their education. This approach drives the transformation of education towards more digitalization and obliges students to thrive in using technology in the learning process. However, many students lack technical competency and more importantly are deprived of having modern devices in their households. In particular, how students perceive technology and how it affects their learning experience and satisfaction is crucial for effective learning. This area of research is still unexplored in the context of TVET Bangladesh. This study attempts to investigate what are the factors that affect the students' perceived satisfaction with the usage of technology and to what extent students are satisfied with the way technology is being used in their learning process. A quantitative research method using an online survey was conducted across Bangladesh and a total of 847 polytechnic students from 16 polytechnic institutes were recruited through non-probability convenience sampling technique. A structural equation modelling (SEM) and independent multivariate analysis of variance (MANOVA) were employed for the data analysis. The results revealed that self-efficacy positively influenced attitude, and attitude positively influenced social interaction. In contrast, attitude negatively influenced perceived satisfaction. This study can help educators implement strategies such as providing scaffolding, promoting self-directed learning, and commemorating student successes to build self-efficacy and a positive attitude towards technology acceptance.

Optical Fiber Probe with Integrated Micro-Optical Filter for Raman and Surface-Enhanced Raman Scattering Sensing.

Optical fiber Raman and surface-enhanced Raman scattering (SERS) probes hold great promise for in vivo biosensing and in situ monitoring of hostile environments. However, the silica Raman scattering background generated within the optical fiber increases in proportion to the length of the fiber, and it can swamp the signal from the target analyte. While filtering can be applied at the distal end of the fiber, the use of bulk optical elements has limited probe miniaturization to a diameter of 600 µm, which in turn limits the potential applications. To overcome this limitation, femtosecond laser micromachining was used to fabricate a prototype micro-optical filter, which was directly integrated on the tip of a 125 µm diameter double-clad fiber (DCF) probe. The outer surface of the microfilter was further modified with a nanostructured, SERS-active, plasmonic film that was used to demonstrate proof-of-concept performance with thiophenol as a test analyte. With further optimization of the associated spectroscopic system, this ultra-compact microprobe shows great promise for Raman and SERS optical fiber sensing.

Assessment of the knowledge, attitude, and practice of childbearing mothers in the geographically coastal region of Bangladesh for cleanliness and food safety of food security.

Objectives: Household hygiene and food safety are essential parts of food security; better food safety and hygiene will help reduce the chances of illness for young children and family members rarely studied in the selected area of coastal Bangladesh. The study aimed to discover the knowledge, attitude, and practice levels for cleanliness, hygiene, and food safety in the household. Methods: In this study, we employed a cross-sectional survey with simple random sampling to collect data from 384 childbearing mothers. The survey used the pretested, validated, and standardized (knowledge, attitude, and practice) questionnaire-model-based interview guide. Results: According to our study analysis, the knowledge, attitude, and practice scores among mothers were inadequate for household cleanliness and hygiene management. In the area context, knowledge efficiency was related to family type (joint and nuclear). Family economic conditions strongly influenced mothers' attitudes and behavior toward knowledge, attitude, and practice score. Unemployed and illiterate mothers have lower knowledge, attitude, and practice scores. Educated mothers have better knowledge, attitude, and practice score compared to illiterate mothers (p < 0.014). Nuclear family knowledge, attitude, and practice attitude was much greater (p < 0.04) and wealthier families showed better practice (p < 0.001) toward cleanliness and food safety in the household level. Conclusions: The study discovered the mothers' and household members' attention need to improve the knowledge, attitude, and practice toward proper hygiene and food safety at the household level of marginalized populations in coastal Bangladesh.

Gender differences in job satisfaction among gig workers in Bangladesh.

The gig economy (temporary, contract, and freelance online jobs rather than permanent positions) is a component of the fourth industrial revolution and preview of future work. The rise of digital platforms has increased career opportunities and income potential, particularly for women. Yet, the sex-disaggregated evidence regarding platform usage, employment characteristics, and working motivations and satisfaction remains untapped. Using data from a quantitative survey of Bangladeshi gig workers (242 men and 201 women) conducted in 2022, this paper addresses these gaps between male and female workers. The gig economy appears to be gender-segregated across digital platform usages and working categories. Women tend to prioritize digital work options for managing multiple responsibilities, while men are often driven by the potential for higher income. This study conceptually utilized the two-factor theory and empirically ordered a probit model to identify gender differences in job satisfaction. Job satisfaction was significantly increased by work-life balance, monthly income, and social-media connection, while an increase in working hours, complexity in payment systems, and unstable networks all led to a decrease in job satisfaction. The findings have implications for the future growth of the gig economy, provide new insights into gender differences in job satisfaction, and underscore the need for gender-sensitive policies in the online labor market.

Assessment of knowledge, attitudes, and practices regarding cardiovascular diseases (CVDs) among older individuals of rural Bangladesh: findings from a face-to-face interview.

Introduction: Cardiovascular diseases (CVDs) stand as the foremost contributor to global mortality, claiming roughly 17.9 million lives each year, constituting 32.1% of total fatalities. Their impact is notably profound in economies such as Bangladesh, exacting a substantial economic burden. Consequently, grasping the landscape of knowledge, attitudes, and practices is essential for timely identification and prevention strategies. Methods: This cross-sectional study, carried out between January and May 2023 in the rural regions of Zirani, Savar Upazila, Dhaka, Bangladesh, utilized convenient sampling and conducted face-to-face interviews using a semi-structured questionnaire. It encompassed socio-demographic factors, as well as knowledge, attitudes, and practices concerning CVDs. Data analysis employed descriptive statistics, chi-square tests, and regression analyses, utilizing both the R programming language and SPSS (Version 26). Result: A total of 424 participants aged 60 years and above were included. The majority were male (60.8%), and the mean age was 71.21 ± 9.21 years, 57.3% were between 60 and 70 years old. Factors such as education, monthly family income, high blood pressure, diabetes, and non-smoking. Were significantly associated with higher knowledge, attitudes and practices scores. Conclusion: This study illuminates CVD-related KAP among rural Older Individuals in Bangladesh, revealing significant associations between factors such as education, monthly family income, high blood pressure, and non-smoking, with higher scores in knowledge, attitudes, and practices regarding cardiovascular health. These insights underscore the importance of addressing socio-economic factors and health behaviors in developing targeted interventions for the prevention and management of cardiovascular diseases in this demographic.

Effect of natural thickener on printing performance over cotton woven fabric.

Execution of natural thickener (wild taro corm) over pretreated cotton woven fabric with reactive dye has been explored in this research work. Taro root was collected from Sherpur in Bangladesh and made into a fine powder using a grinder. Thickener pastes were prepared by using different concentrations of taro powder, then their viscosity was measured to find out the difference with sodium alginate thickener, which is traditionally used for reactive printing. A suitable thickener stock paste concentration was selected from a number of trials and depending on the result of visual sharpness of the printed samples. A suitable reactive printing method was selected between all in (1 step) and 2 step methods of reactive printing and finally the amount of thickener on the printing recipe was optimized. The color fastness to wash, color fastness to rubbing, bending length, K/S value, levelness, penetration%, print paste adds on and visual sharpness were measured to assess the printing quality. The findings indicate that when Taro corm powder is combined with boiled water, it produces a solution with higher viscosity. Additionally, a mixture of 15 % taro and boiled water yields the most distinct print outline. Comparatively, the 2-step reactive printing method offers a superior outline compared to the 1-step (all in one) method. Moreover, using 50 to 60 gm of taro corm thickening paste for every 100 g of print paste results in a higher K/S value. The results revealed that the wild taro corm could be used successfully as thickener for reactive printing. Finally, the cost was also calculated, and it was found economical as well compared to sodium alginate.

Evaluation of Aflatoxins and Heavy Metals Exposure in the Local Feeds of Fish and Shrimp in Bangladesh.

This study aims to comprehensively assess the presence of aflatoxins, pervasive fungal toxins, and heavy metals (lead, chromium, cadmium) in the local feed of fish and shrimp. Forty-eight samples of the fish and shrimp feed were collected from the Dhaka and Sathkhira districts of Bangladesh respectively. Aflatoxins (B1, B2, G1, G2) were analyzed by high-performance liquid chromatography (HPLC) with fluorescence detector, and atomic absorption spectrophotometry (AAS) was used for the heavy metal detection after sample digestion. The standard analytical methods of the Association of Official Analytical Chemists were followed for analyzing the proximate composition of the feed samples. The findings revealed the high toxic concentration of total aflatoxins particularly in fish feed (196.25 µg/kg). Concurrently, varying concentrations of heavy metals, including lead (Pb) and chromium (Cr), were detected, with the highest levels found in shrimp feed at 3.324 and 174.6 mg/kg, respectively. In comparison, highest contamination of cadmium (Cd) was found in fish feed at 0.398 mg/kg. The outcomes are growing concerns regarding the quality of locally sourced feed and emphasizing the need for prompt corrective actions. Otherwise, neglecting this concern may lead to the possibility of both fish and, ultimately, humans who consume them being vulnerable to the absorption and accumulation of these assessed toxic compounds.

Fabrication and synergistically enhanced photocatalytic activity of ternary kaolinite, TiO2, and Al2O3 (K65T30A5) nanocomposite for visible-light-induced degradation of methylene blue and remazol red dye.

The ternary photocatalyst ((Al2Si2O5 (OH)4/TiO2/Al2O3) composites (where w/w = 65, 30, and 5 wt%) denoted K65T30A5 were successfully synthesized and examined for their efficiency in removing cationic (Methylene Blue, MB) and anionic (Remazol Red, RR) dye from aqueous medium under visible-light irradiation. A series of nanocomposites with varied wt% of kaolinite, TiO2, and Al2O3 were prepared through sonication followed by calcination at 600 °C. X-ray diffraction (XRD) analysis confirmed the crystallinity of the synthesized materials and established their average crystal size to be 83.87 nm. The morphological structure, composite molecule, and surface properties of the resulting K65T30A5 were characterized using FTIR, FE-SEM, and EDS analyses to confirm the successful fabrication of the nanocomposite. FTIR and EDS elemental mapping analyses confirmed the presence of Al, Si, Ti, and O elements in the nanocomposites. The composites exhibited photocatalytic behaviour across the UV-visible spectra, with values varying from the ultraviolet to the visible region with a sharp increase in reflectance at 510 nm. Near-complete degradation of MB (97.66 %) was achieved within 90 min at pH 9 and a 10 mg/L dye concentration, while RR removal reached 90.66 % within 120 min at pH 3.5 and the same dye concentration under visible light irradiation. The catalyst exhibited robust stability, retaining its efficiency by removing 85.09 % of MB and 80.21 % of RR dye after three reuse cycles. The composite catalyst discussed in this study emerges as a promising material for straightforward fabrication techniques, featuring a high percentage of kaolinite and proving to be a cost-effective solution for large-scale water and wastewater treatment processes.

Diabetes mellitus, the fastest growing global public health concern: Early detection should be focused.

Background and Aims: Diabetes is recognized as a significant factor in both mortality and morbidity worldwide, affecting various demographics regardless of geographic location, age group, or gender. This correspondence aims to express concern and draw the attention of leaders and policymakers worldwide to this critical public health issue. Methods: A thorough literature search was conducted utilizing various databases, including Google Scholar, PubMed, Science Direct, and the International Diabetes Federation (IDF) website, to collect the required data. Keywords were strategically applied to enhance search results, with preference given to English-language articles containing pertinent information. Results: According to the 2021 report by the IDF, approximately 537 million individuals globally were affected with diabetes, constituting roughly 10.5% of the world's populace. This condition incurred healthcare expenditures totaling $966 billion. Projections indicate a surge in diabetes cases to 783 million by 2045, with associated healthcare costs estimated to surpass $1054 billion. However, almost half of all people with diabetes are unaware of their medical condition, with the highest prevalence of undiagnosed diabetes Mellitus (DM) found in low and middle-income countries (LMICs) of the regions of Africa, the Western Pacific, and Southeast Asia. Conclusion: Collaborating with the World Health Organization (WHO), LMIC governments should improve healthcare accessibility, including more frequent diabetes screenings for individuals aged ≥ 45 years and younger individuals at elevated risk of having a family history.

Spatiotemporal mapping of rice acreage and productivity growth in Bangladesh.

Technological advancements have long played crucial roles in rice productivity and food security in Bangladesh. Seasonal variation over time and regional differences in rice production, however, pose a threat to agricultural sustainability but remain unexplored. We performed a spatial-temporal mapping of rice cultivation area, production, and yield from 2006-2007 to 2019-2020 using secondary data for disaggregating 64 districts in Bangladesh. Growth and multivariate approaches were employed to analyze time-series data. Results showed that Mymensingh had the highest rice cultivated area and production, while Bandarban had the lowest. The 14 years highest average rice yield was found in Gopalganj and Dhaka (3.63 tons/ha), while Patuakhali (1.73 tons/ha) had the lowest. For the Aus, Aman, and Boro, the rice cultivation area in 19 districts, 11 districts, and 13 districts declined significantly. The overall rice production increased significantly in most districts. For the Aus, Aman, and Boro seasons, the rice yield in 54, 50, and 37 districts demonstrated a significant upward trend, respectively. The adoption rate of modern varieties has risen dramatically. However, there are notable variances between regions and seasons. A significant increasing trend in Aus (0.007% to 0.521%), Aman (0.004% to 0.039%), and Boro (0.013% to 0.584%) were observed in 28, 34, and 36 districts, respectively, with an increase of 1% adaptation of HYV. Predictions revealed that rice cultivation area and production of Aus, Aman, and Boro seasons will be increased in most of the regions of Bangladesh by 2030. Based on spatiotemporal cluster analysis, the five identified cluster groupings illustrated that clusters lack spatial cohesion and vary greatly seasonally. This suggests increasing rice production by expanding cultivable land, adopting high-yielding varieties, and integrating faster technological advancement in research and extension. The findings will assist scientists in developing region-specific production technologies and policymakers in designing decentral region-specific policies to ensure the future sustainability of rice production.

Comparative analysis of biometrical and reproductive indices, proximate composition, and hemato-biochemical variables of cuchia eel Monopterus cuchia (Hamilton, 1822) from six different localities of Bangladesh.

Cuchia eel (Monopterus cuchia) is among the most sought-after freshwater fish, owing to its exceptional nutritional profile and high consumer demand. The current research aimed to establish baseline data by comparing the proximate composition, hematological, and plasma biochemical indices of Cuchia eel populations across six different geographical locations in Bangladesh: Bogra, Haluaghat, Jamalpur, Moktagacha, Sylhet, and Tangail. By examining these parameters, we aim to gain valuable insights into the nutritional benefits, physiological responses, and potential adaptations of this species to varying environments. The statistical analysis revealed no significant (P > 0.05) variances in the whole-body proximate composition of the fish captured from distinct areas. However, it was observed that different geographical regions had remarkable impacts on the variations of the majority of the hematological parameters, except for some cases. Additionally, there was a notable (P < 0.05) increase or decrease in most of the serum biochemical contents in certain localities as compared to others in this study. Light microscopic examination of Cuchia eel blood smears exhibited lower numbers but larger sizes of RBCs. The findings of this study lead to the conclusion that different localities had significant impacts on the hematology and blood biochemical indices of Cuchia eel, even though the whole-body proximate composition showed no significant variations. This research contributes to a deeper understanding of the physiological aspects of Cuchia eel.

Current trends in textile wastewater treatment-bibliometric review.

A bibliometric study using 1992 to 2021 database of the Science Citation Index Expanded was carried out to identify which are the current trends in textile wastewater treatment research. The study aimed to analyze the performance of scholarly scientific communications in terms of yearly publications/citations, total citations, scientific journals, and their categories in the Web of Sciences, top institutions/countries and research trends. The annual publication of scientific articles fluctuated in the first ten years, with a steady decrease for the last twenty years. An analysis of the most common terms used in the authors' keywords, publications' titles, and KeyWords Plus was carried out to predict future trends and current research priorities. Adsorbent nanomaterials would be the future of wastewater treatment for decoloration of the residual dyes in the wastewater. Membranes and electrolysis are important to demineralize textile effluent for reusing wastewater. Modern filtration techniques such as ultrafiltration and nanofiltration are advanced membrane filtration applications.

Identification of influential weather parameters and seasonal drought prediction in Bangladesh using machine learning algorithm.

Droughts pose a severe environmental risk in countries that rely heavily on agriculture, resulting in heightened levels of concern regarding food security and livelihood enhancement. Bangladesh is highly susceptible to environmental hazards, with droughts further exacerbating the precarious situation for its 170 million inhabitants. Therefore, we are endeavouring to highlight the identification of the relative importance of climatic attributes and the estimation of the seasonal intensity and frequency of droughts in Bangladesh. With a period of forty years (1981-2020) of weather data, sophisticated machine learning (ML) methods were employed to classify 35 agroclimatic regions into dry or wet conditions using nine weather parameters, as determined by the Standardized Precipitation Evapotranspiration Index (SPEI). Out of 24 ML algorithms, the four best ML methods, ranger, bagEarth, support vector machine, and random forest (RF) have been identified for the prediction of multi-scale drought indices. The RF classifier and the Boruta algorithms shows that water balance, precipitation, maximum and minimum temperature have a higher influence on drought intensity and occurrence across Bangladesh. The trend of spatio-temporal analysis indicates, drought intensity has decreased over time, but return time has increased. There was significant variation in changing the spatial nature of drought intensity. Spatially, the drought intensity shifted from the northern to central and southern zones of Bangladesh, which had an adverse impact on crop production and the livelihood of rural and urban households. So, this precise study has important implications for the understanding of drought prediction and how to best mitigate its impacts. Additionally, the study emphasizes the need for better collaboration between relevant stakeholders, such as policymakers, researchers, communities, and local actors, to develop effective adaptation strategies and increase monitoring of weather conditions for the meticulous management of droughts in Bangladesh.

Using an internal body residue approach to assess acute pesticide toxicity in juvenile Chinook salmon (Oncorhynchus tshawytscha).

The use of internal body residues has the potential to improve toxicological assessments of hydrophobic pesticides. The acute toxicity of three classes of pesticides were assessed in juvenile Chinook salmon using internal body residues. Chinook salmon were exposed to two current-use pesticides bifenthrin and fipronil, and 4,4'- dichlorodiphenyldichloroethylene (DDE), which is a degradation product of the legacy pesticide dichlorodiphenyltrichloroethane (DDT). After 96-h of aqueous exposure to each pesticide, the pesticide content in whole-body Chinook salmon homogenates was measured using gas chromatography/mass spectrometry with methane negative chemical ionization. The wet-weight (ww) normalized lethal residue at 50% mortality (LR50) was lowest for bifenthrin (0.654 nmol/g ww), followed by fipronil (7.17 nmol/g ww) and the sum of fipronil and its sulfone, sulfide, and desulfinyl degradation products (8.72 nmol/g ww). No lethality was observed for DDE, even at the highest body residue (>116 nmol/g ww). LR50 estimates were also normalized to dry weight and lipid content and compared to field-caught fish to assess risk. The use of a risk quotient approach indicated that bifenthrin imparts the highest risk of acute toxicity in juvenile Chinook salmon among the three pesticides tested. In comparison to external dose metrics, the use of internal body residues has the potential to improve risk assessment by providing a more direct link between pesticide concentration at the receptor site and toxicological effects.

Evaluation of LAMP for Fasciola hepatica detection from faecal samples of experimentally and naturally infected cattle.

Fasciola hepatica causes liver fluke disease in production animals and humans worldwide. Faecal egg counts (FEC) are the most common diagnostic tool for the diagnosis of liver fluke disease. However, FEC has low sensitivity and is often unreliable for the detection of patent infection. In this study, loop-mediated isothermal amplification (LAMP) was optimised and evaluated for the detection of Fasciola hepatica infection, with the aim of increased sensitivity and making it suitable for on-farm application. LAMP was initially conducted under laboratory conditions, optimised to enable visual detection using calcein dye. DNA extraction based on bead-beating was developed to enable on-farm application. LAMP results were compared to FEC and polymerase chain reaction (PCR). Under laboratory conditions, LAMP was conducted using two incubation methods: a conventional PCR thermocycler and a field-deployable LAMP instrument. When compared to a 'rigorous' FEC protocol consisting of multiple counts using a comparatively large volume of faeces and with infection confirmed post-mortem, LAMP was highly sensitive and specific (using silica membrane DNA extraction sensitivity 88 %, specificity 100 %; using sieving and beat-beating DNA extraction sensitivity 98.9 %, specificity 100 %). When applied on-farm, LAMP was compared to conventional FEC, which suggested high sensitivity but low specificity (sensitivity 97 %, specificity 37.5 %). However, further analysis, comparing field LAMP results to laboratory PCR, suggested that the low specificity was likely the outcome of the inability of conventional FEC to detect all true F. hepatica positive samples. Based on the high sensitivity and specificity of LAMP compared to a 'rigorous' FEC protocol and its ability to be used in field settings, the study demonstrates the potential of LAMP for diagnosing F. hepatica infection in agriculture.

Inhibition of microRNA-34c reduces detrusor ROCK2 expression and urinary bladder inflammation in experimental cystitis.

Interstitial cystitis (IC), also called painful bladder syndrome (PBS), is 2 to 5 times more common in women than in men, yet its cause and pathogenesis remain unclear. In our study using the cyclophosphamide (CYP)-induced mouse model of cystitis, histological evaluation of the urinary bladder (UB) lamina propria (LP) showed immune cell infiltrations, indicating moderate to severe inflammation. In this study, we noticed a differential expression of a subset of microRNAs (miRs) in the UB cells (UBs) of CYP-induced cystitis as compared to the control. UB inflammatory scores and inflammatory signaling were also elevated in CYP-induced cystitis as compared to control. We identified eight UBs miRs that exhibited altered expression after CYP induction and are predicted to have a role in inflammation and smooth muscle function (miRs-34c-5p, -34b-3p, -212-3p, -449a-5p, -21a-3p, -376b-3p, -376b-5p and - 409-5p). Further analysis using ELISA for inflammatory markers and real-time PCR (RT-PCR) for differentially enriched miRs identified miR-34c as a potential target for the suppression of UB inflammation in cystitis. Blocking miR-34c by antagomir ex vivo reduced STAT3, TGF-ß1, and VEGF expression in the UBs, which was induced during cystitis as compared to control. Interestingly, miR-34c inhibition also downregulated ROCK2 but elevated ROCK1 expression in bladder and detrusor cells. Thus, the present study shows that targeting miR-34c can mitigate the STAT3, TGF-ß, and VEGF, inflammatory signaling in UB, and suppress ROCK2 expression in UBs to effectively suppress the inflammatory response in cystitis. This study highlights miR-34c as a potential biomarker and/or serves as the basis for new therapies for the treatment of cystitis.

Physicochemical reports of gliclazide-carplex solid dispersions and tablets prepared with directly compressible co-processed excipients.

Objectives: The main goal of this research was to develop better tablet formulations by utilizing solid dispersions (SDs) and coprocessing excipients composite to achieve a better release rate of poor water-soluble gliclazide. Methods: The solvent evaporation method made SDs of gliclazide with different carriers carplex 67, carplex 80, and carplex FPS 500 (weight ratio, 1:1). The drug release patterns of the SDs were all evaluated and optimized. The SDs were illustrated by using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray powder diffraction (PXRD), and Fourier transform infrared spectroscopy (FTIR). Tablet batches FGC-1 to 8 were made using gliclazide-carplex 67 solid dispersions (GC67-SDs) and the co-processed composite of excipients, namely starch-MCC-povidone (SMP) and lactose-MCC-povidone-sodium starch glycolate (LMPS), prepared with coprocessing technology. We evaluated these batches by conducting physicochemical tests and comparing them to the existing commercial brand. Results: In a water medium, the release of gliclazide from SDs peaked within the first 30 min, showing a roughly 5∼6-fold increase compared to plain gliclazide. This quick dissolution rate may be due to the amorphization of the drug, which improved the specific surface area, and increased wettability caused by the hydrophilic properties of carplex particles. This has been confirmed through SEM, DSC, FTIR, and PXRD analysis. All FGC formulations had satisfactory pre-compression factor results, while the post-compression parameters indicated good mechanical strength and homogeneity across the blend. All produced tablets met the weight variation, friability, and disintegration time limit set by the compendia. Through in vitro drug release testing, it was discovered that all FGC tablet batches had consistent and nearly identical release results compared to SDs of gliclazide. However, the FGC-5 to 8 batches containing LMPS composites were determined to be the most effective formulations. In the first 30 min in a water medium, the percentage of drug generated from the FGC-8 tablets involving GC67-SDs and co-processed composite LMPS-4 is approximately 3.5 times higher than the average release of currently marketed products (MPs). After storing the selected FGC tablet batches for three months at 40 °C and 75 % RH, there were no noticeable alterations in the amount of drug and drug release profiles across the batches. Conclusion: Based on these findings, it appears that using the carplex silica-based SDs approach, along with gliclazide and co-processing excipients composite, could result in significant benefits compared to the current commercial brands. This approach could be effectively utilized to create solid dosage forms for drugs that have low solubility in water.

Differential response of phenylpropanoid pathway as linked to hormonal change in two Brassica napus cultivars contrasting drought tolerance.

Oilseed rape (Brassica napus L.) is a significant agro-economic crop with a wide range of uses. Drought is the most frequent unfavourable environmental stressor restraining its growth and development worldwide. This study was conducted to characterize the drought-responsive phenylpropanoid pathway and its link to hormonal changes in two cultivars, drought-resistant "Saturnin" and drought-susceptible "Mosa." Drought susceptibility in cv. Mosa was confirmed by its lower water use efficiency and higher lipid peroxidation levels with reactive oxygen species (ROS) accumulation. In cv. Saturnin, higher salicylic acid (SA) levels and expression of dehydration-responsive element binding 2 (DREB2) and non-expressor of pathogenesis-related gene 1 (NPR1) led to an upregulation of production of anthocyanin pigment 1 (PAP1) and phenylpropanoid pathway-related gene (CHS, F5H and COMT1) expression, increasing hydroxycinnamic acid and flavonoid compound concentrations. However, in cv. Mosa, higher increases in the activity of lignifying enzymes (polyphenol oxidase, coniferyl alcohol peroxidase, syringaldazine peroxidase, guaiacol peroxidase) and expression of the lignin synthesis-related gene cinnamyl alcohol dehydrogenase 2 (CAD2) were found along with greater increases in abscisic acid (ABA) levels and upregulation of ABA-responsive element binding 2 (AREB2) and basic helix-loop-helix transcription factor MYC2. These results indicate that drought-induced SA-mediated activation of the hydroxycinnamic acid and flavonoid pathways contributes to drought resistance, whereas ABA-mediated lignification contributes to drought susceptibility.