ABSTRACT
The predominant type of plasmids found in Acinetobacter species encode a Rep_3 initiation protein and many of these carry their accessory genes in dif modules. Here, available sequences of the 14 members of the group of Rep_3 plasmids typed as R3-T33, using a threshold of 95% identity in the repA gene, were compiled and compared. These plasmids were from various Acinetobacter species. The pdif sites were identified allowing the backbone and dif modules to be defined. As for other Rep_3 plasmids carrying dif modules, orfX encoding a protein of unknown function was found downstream of repA followed by a pdif site in the orientation XerC binding site-spacer-XerD binding site. Most backbones (n = 12) also included mobA and mobC genes but the two plasmids with the most diverged repA and orfX genes had different backbone contents. Although the gene content of the plasmid backbone was largely conserved, extensive recombinational exchange was detected and only two small groups carried identical or nearly identical backbones. Individual plasmids were associated with 1 to 13 dif modules. Many different dif modules were identified, including ones containing antibiotic or chromate resistance genes and several toxin/antitoxin gene pairs. In some cases, modules carrying the same genes were significantly diverged. Generally, the orientation of the pdif sites alternated such that C modules (XerC binding sites internal) alternated with D modules (XerD binding sites internal). However, fusions of two dif modules via mutational inactivation or loss of a pdif site were also detected.
Subject(s)
Acinetobacter , Plasmids , Acinetobacter/genetics , Plasmids/genetics , Plasmids/metabolism , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Binding Sites , DNA, Bacterial/genetics , Base Sequence , Phylogeny , Trans-Activators/genetics , Trans-Activators/metabolism , DNA HelicasesABSTRACT
IMPORTANCE: Bacteriophage show promise for the treatment of Acinetobacter baumannii infections that resist all therapeutically suitable antibiotics. Many tail-spike depolymerases encoded by phage that are able to degrade A. baumannii capsular polysaccharide (CPS) exhibit specificity for the linkage present between K-units that make up CPS polymers. This linkage is formed by a specific Wzy polymerase, and the ability to predict this linkage using sequence-based methods that identify the Wzy at the K locus could assist with the selection of phage for therapy. However, little is known about the specificity of Wzy polymerase enzymes. Here, we describe a Wzy polymerase that can accommodate two different but similar sugars as one of the residues it links and phage depolymerases that can cleave both types of bond that Wzy forms.
Subject(s)
Acinetobacter Infections , Acinetobacter baumannii , Bacteriophages , Humans , Acinetobacter baumannii/genetics , Bacterial Capsules/metabolism , Multigene Family , Polysaccharides, Bacterial/analysisABSTRACT
The complete genome of RBH2, a sporadic, carbapenem resistant ST111 Acinetobacter baumannii isolate from Brisbane, Australia was determined and analysed. RBH2 is extensively resistant and the chromosome includes two transposons carrying antibiotic resistance genes, AbaR4 (oxa23 in Tn2006) and Tn7::Tn2006 (dfrA1, sat2, aadA1, oxa23). The chromosome also includes two copies of Tn6175, a transposon carrying putative copper resistance genes, and 1-17 copies of six different insertion sequences. RBH2 has six plasmids ranging in size from 6 kb - 141 kb, four carrying antibiotic resistance genes. Plasmids pRBH2-1 (aadB) and pRBH2-2 (aphA6 in TnaphA6) were found to be essentially identical to known plasmids pRAY*-v1 and pS21-1, respectively. The largest plasmids, pRBH2-5 (oxa23 in AbaR4) and pRBH2-6 (oxa23 in AbaR4::ISAba11 and sul2, tet(B), strA and strB in Tn6172) have known transfer-proficient relatives. pRBH2-5, an RP-T1 (RepAci6) plasmid, also carries a different putative copper resistance transposon related to Tn6177 found in pS21-2. The backbone of pRBH2-5 is related to those of previously described RepAci6 plasmids pAb-G7-2 and pA85-3 but has some distinctive features. Three different RepAci6 backbone types were distinguished, Type 1 (pAb-G7-2), Type 2 (pA85-3) and Type 3 (pRBH2-5 and pS21-2). pRBH2-6 is closely related to pAB3 and their backbones differ by only 5 SNPs. Plasmids pRBH2-3 and pRBH2-4 do not carry antibiotic resistance genes. pRBH2-3 does not include an identifiable rep gene and is a novel plasmid type. pRBH2-4 is of the R3-T3 type and includes segments of the larger pABTJ2 that heads this group. Other ST111 genomes carry different plasmids.
Subject(s)
Acinetobacter Infections , Acinetobacter baumannii , Humans , Anti-Bacterial Agents/pharmacology , Plasmids/genetics , DNA Transposable Elements/genetics , Acinetobacter baumannii/genetics , Copper , Acinetobacter Infections/genetics , Sequence Analysis, DNAABSTRACT
An IncC or IncA plasmid is needed to enable transfer of SGI1 type integrative mobilisable elements but an IncC plasmid does not stably co-exist with SGI1. However, the plasmid is stably maintained with SGI1-K, a natural SGI1 deletion variant that lacks the sgaDC genes (S007 and S006) and the upstream open reading frame (S008) found in the SGI1 backbone. Here, the effect of the sgaDC genes and S008 on the stability of an IncC plasmid in an Escherichia coli strain with or without SGI1-K was examined. Co-transcription of the S008 open reading frame with the downstream sgaDC genes was established. When a strain containing SGI1-K complemented with a pK18 plasmid that included S008-sgaDC or sgaDC expressed from the constitutive pUC promoter was grown without antibiotic selection, the resident IncC plasmid was rapidly lost but loss was slower when S008 was present. In contrast, SGI1-K and the S008-sgaDC or sgaDC plasmid were quite stably maintained for >100 generations. However, the high copy number plasmids carrying the SGI1-derived S008-sgaDC or sgaDC genes constitutively expressed could not be introduced into an E. coli strain carrying the IncC plasmid but without SGI1-K. Using equivalent plasmids with S008-sgaDC or sgaDC genes controlled by an arabinose-inducible promoter, under inducing conditions the IncC plasmid was stable but the plasmid containing the SGI1-derived genes was rapidly lost. This unexpected observation indicates that there are multiple interactions between the IncC plasmid and SGI1 in which the transcriptional activator genes sgaDC play a role. These interactions will require further investigation.
Subject(s)
Escherichia coli , Genomic Islands , Plasmids/genetics , Escherichia coli/genetics , Anti-Bacterial Agents/pharmacology , Operon , Drug Resistance, Multiple, Bacterial/geneticsABSTRACT
OBJECTIVES: The aim of this study was to characterise an early clinical multiply antibiotic resistant Acinetobacter baumannii global clone 1 (GC1) isolate from Africa. METHODS: The draft genome sequence was determined using short-read (Illumina MiSeq) sequence data and compared to other early GC1 isolates. Resistance genes and other features were identified using various bioinformatics tools. Plasmids were visualised. RESULTS: LUH6050, recovered in South Africa between January 1997 and January 1999, is ST1IP:ST231Ox:KL1:OCL1. Several antibiotic resistance genes (aacC1, aadA2, aphA1, catA1, sul1, and tetA(A)) reside in AbaR32. LUH6050 also includes the plasmid pRAY*, carrying the aadB gentamicin and tobramycin resistance gene, and a 29.9 kb plasmid, pLUH6050-3, carrying the msrE-mphE (macrolide resistance) and dfrA44 (trimethoprim resistance) genes and a small cryptic Rep_1 plasmid. Plasmid pLUH6050-3, a cointegrate of pA1-1 (R3-T1; RepAci1) with an R3-T33 type plasmid encoding a different Rep_3 family Rep, carries 15 pdif sites and 13 dif modules, including those that carry the mrsE-mphE and dfrA44 genes and three that include toxin-antitoxin gene pairs. The closest relative of pLUH6050-3 found in GenBank was from an unrelated 2013 Tanzanian A. baumannii isolate. The chromosome has an AbaR0-type region in comM and includes no ISAba1 copies. Similar features were found in most other sequenced lineage 1 GC1 isolates recovered prior to 2000. CONCLUSION: LUH6050 represents an early form of the GC1 lineage 1, supplementing limited information about early isolates and isolates from Africa. These data contribute to the understanding of the emergence, evolution, and dissemination of the A. baumannii GC1 clonal complex.
Subject(s)
Acinetobacter baumannii , Anti-Bacterial Agents , Anti-Bacterial Agents/pharmacology , Acinetobacter baumannii/genetics , South Africa , DNA Transposable Elements , Drug Resistance, Bacterial , Drug Resistance, Multiple, Bacterial/genetics , MacrolidesABSTRACT
Though IncC and IncA plasmids are compatible, they exert high level exclusion on one another. Here, the question of whether the presence of an SGI1 family element in the donor can overcome the exclusion of an IncC plasmid exerted by an IncC or IncA plasmid in the recipient was investigated. The transfer of the integrative mobilizable element SGI1 and its many variant forms into a new host is dependent on transfer machinery supplied by IncC or IncA plasmids. SGI1 elements include the determinants of a mobilization system and three genes that encode homologues of transfer proteins including TraG. Exclusion of a complete IncC plasmid by a complete IncA or IncC plasmid in the recipient was not ameliorated by an SGI1 element in the donor. However, transfer of the SGI was unaffected indicating that a functional mating apparatus was formed. The presence of only the plasmid-derived eexC or eexA gene in the recipient exerted high level exclusion on an incoming IncC plasmid and this was overcome by an SGI1 variant in the donor. Hence, the SGI affects only entry exclusion and additional plasmid features must influence other routes to plasmid exclusion.
Subject(s)
Genomic Islands , Plasmids/geneticsABSTRACT
OBJECTIVES: To identify the origins of resistance in a sporadic extensively resistant Acinetobacter baumannii isolate. METHODS: The complete genome of RCH52 was determined by combining available Illumina short reads with MinION (Oxford Nanopore) long reads using Unicycler. Bioinformatic searches were used to identify features of interest. RESULTS: The complete genome of RCH52 revealed an unusual chromosomal region containing all of the antibiotic resistance genes, except tet39, which is in a plasmid. A 129 585 bp segment was bounded by inversely oriented copies of ISAba1 and included two groups of resistance genes separated by the large segment of the backbone of type 1 IncC plasmids that lies between the ARI-A and ARI-B resistance islands but does not include the replication region. The ISAba1-bounded segment was located in a novel integrative element that had integrated into the chromosomal thyA gene but provided a replacement thyA gene. Several resistance genes are derived from either the ARI-A or the ARI-B resistance islands found in IncC plasmids that have been brought together by an IS26-mediated deletion of the original plasmid. This non-replicating circular molecule (or translocatable unit) has been incorporated into a smaller ISAba1-bounded unit that includes oxa23 in Tn2008B via homologous recombination between sul2-CR2-floR segments found in both. CONCLUSIONS: The plasmids shared by most Gram-negative pathogens, including the broad host range IncC plasmids, have not been detected in Acinetobacter species. However, it seems likely that they can conjugate into members of this genus and contribute pre-existing clusters of antibiotic resistance genes.
Subject(s)
Acinetobacter baumannii , Acinetobacter baumannii/genetics , Anti-Bacterial Agents/pharmacology , Drug Resistance, Multiple, Bacterial/genetics , Plasmids/genetics , Sequence Analysis, DNAABSTRACT
To track the spread of antibiotic resistance genes, accurate identification of individual genes is essential. Acquired trimethoprim resistance genes encoding trimethoprim-insensitive homologues of the sensitive dihydrofolate reductases encoded by the folA genes of bacteria are increasingly found in genome sequences. However, naming and numbering in publicly available records (journal publications or entries in the GenBank non-redundant DNA database) has not always been unambiguous. In addition, the nomenclature has evolved over time. Here, the changes in nomenclature and the most commonly encountered problems and pitfalls affecting dfrA gene identification arising from historically incorrect or inaccurate numbering are explained. The complete set of dfrA genes/DfrA proteins found in Gram-negative bacteria for which readily searchable sequence information is currently available has been compiled using less than 98% identity for both the gene and the derived protein sequence as the criteria for assignment of a new number. In most cases, trimethoprim resistance has been demonstrated. The gene context, predominantly in a gene cassette or near the ori end of CR1 or CR2, is also covered. The RefSeq database that underpins the programs used to automatically identify resistance genes in genome data sets has been curated to assign all sequences listed to the correct number. This led to the assignment of corrected or new gene numbers to several mis-assigned sequences. The unique numbers assigned for the dfrA/DfrA set are now listed in the RefSeq database, which we propose provides a way forward that should end future duplication of numbers and the confusion that causes.
Subject(s)
Trimethoprim Resistance , Trimethoprim , Anti-Bacterial Agents/pharmacology , Gram-Negative Bacteria/genetics , Tetrahydrofolate Dehydrogenase/genetics , Trimethoprim/pharmacology , Trimethoprim Resistance/geneticsABSTRACT
OBJECTIVES: To understand the acquisition of resistance genes by a non-GC1, non-GC2 Acinetobacter baumannii strain responsible for a 4 year outbreak at a Sydney hospital. METHODS: Representative isolates were screened for resistance to antibiotics. Three were subjected to WGS using Illumina HiSeq. One genome was completed with MinION long reads. Resistance regions were compared with known sequences using bioinformatics. RESULTS: Isolates were resistant to third-generation cephalosporins, gentamicin and tobramycin, sulfamethoxazole and erythromycin. Sequenced isolates were ST49 (Institut Pasteur scheme) and ST128 (Oxford scheme) and carried KL11 at the capsule locus and OCL8 at the lipooligosaccharide outer core locus. The complete genome of isolate J9 revealed that the resistance genes were all in plasmids; pRAY* contained aadB, and a large plasmid, pJ9-3, contained sul2 and floR genes and a dif module containing the mph(E)-msr(E) macrolide resistance genes. Transposon Tn6168, consisting of a second copy of the chromosomal ampC gene region flanked by ISAba1s, confers resistance to third-generation cephalosporins. Tn6168 is located inside the mph(E)-msr(E) dif module. pJ9-3 includes a set of four dif modules and the orientation of the pdif sites, XerC-XerD or XerD-XerC, alternates. A large transposon, Tn6175, containing tniCABDE transposition genes and genes annotated as being involved in heavy metal metabolism, uptake or export was found in the comM gene. Other ST49:ST128:KL11:OCL8 genomes found in the GenBank WGS database carried Tn6175 but neither of the plasmids carrying the resistance genes. CONCLUSIONS: An early carbapenem-susceptible A. baumannii outbreak recorded in Australia was caused by an unusual clone that had acquired plasmids carrying antibiotic resistance genes.
Subject(s)
Acinetobacter Infections , Acinetobacter baumannii , Acinetobacter Infections/epidemiology , Acinetobacter baumannii/genetics , Anti-Bacterial Agents/pharmacology , Australia/epidemiology , Disease Outbreaks , Drug Resistance, Bacterial , Hospitals , Humans , Macrolides , Plasmids/genetics , Sequence Analysis, DNAABSTRACT
BACKGROUND: In Gram-negative bacteria, over 30 different genes are known to encode a trimethoprim-insensitive dihydrofolate reductase that confers resistance to trimethoprim. OBJECTIVES: To determine whether a gene encoding a putative dihydrofolate reductase found in type 2 IncC plasmids isolated between 2002 and 2013 in healthcare facilities in Melbourne, Australia, confers trimethoprim resistance. METHODS: Conjugation was used to transfer plasmids into a laboratory Escherichia coli. A PCR-amplified fragment was cloned into pUC19 using Gibson Assembly and transformed into E. coli. The level of resistance to trimethoprim was determined using broth microdilution. MEGA (7.0.26) and Geneious Prime (7.0.9) were used to examine the relationship to known Dfr proteins. RESULTS: The conjugative IncC plasmid pEc158 from a 2002 Melbourne clinical E. coli isolate was shown to transfer trimethoprim resistance. The putative DfrA protein encoded by a dfrA gene in pEc158 shares <40% amino acid identity with any previously identified DfrA protein. This gene was cloned and found to confer trimethoprim resistance. The gene and protein were named dfrA35/DfrA35. In pEc158 the dfrA35 gene is located near the ori end of a partial copy of the CR1 element, within a complex resistance island. It is found in the same location in further closely-related type 2 IncC plasmids from Klebsiella pneumoniae (Melbourne, 2013), which were not transfer proficient. CONCLUSIONS: Resistance determinants continue to be found and will be missed using website-associated databases to infer phenotypes from genome sequences rather than direct phenotypic testing.
Subject(s)
Cross Infection/microbiology , Escherichia coli Infections/microbiology , Escherichia coli/enzymology , Escherichia coli/isolation & purification , Plasmids/analysis , Tetrahydrofolate Dehydrogenase/genetics , Trimethoprim Resistance , Australia , Conjugation, Genetic , Escherichia coli/genetics , Gene Transfer, Horizontal , Health Facilities , Humans , Plasmids/classificationABSTRACT
The large, broad host range IncC plasmids are important contributors to the spread of key antibiotic resistance genes and over 200 complete sequences of IncC plasmids have been reported. To track the spread of these plasmids accurate typing to identify the closest relatives is needed. However, typing can be complicated by the high variability in resistance gene content and various typing methods that rely on features of the conserved backbone have been developed. Plasmids can be broadly typed into two groups, type 1 and type 2, using four features that differentiate the otherwise closely related backbones. These types are found in many different countries in bacteria from humans and animals. However, hybrids of type 1 and type 2 are also occasionally seen, and two further types, each represented by a single plasmid, were distinguished. Generally, the antibiotic resistance genes are located within a small number of resistance islands, only one of which, ARI-B, is found in both type 1 and type 2. The introduction of each resistance island generates a new lineage and, though they are continuously evolving via the loss of resistance genes or introduction of new ones, the island positions serve as valuable lineage-specific markers. A current type 2 lineage of plasmids is derived from an early type 2 plasmid but the sequences of early type 1 plasmids include features not seen in more recent type 1 plasmids, indicating a shared ancestor rather than a direct lineal relationship. Some features, including ones essential for maintenance or for conjugation, have been examined experimentally.
Subject(s)
Drug Resistance, Bacterial/genetics , Drug Resistance, Multiple, Bacterial/genetics , Gram-Negative Bacteria/genetics , Plasmids/genetics , Anti-Bacterial Agents/therapeutic use , DNA Transposable Elements/genetics , DNA, Bacterial/genetics , Drug Resistance, Bacterial/drug effects , Drug Resistance, Multiple, Bacterial/drug effects , Gram-Negative Bacteria/drug effects , Gram-Negative Bacteria/pathogenicity , HumansABSTRACT
In an early study, IncA and IncC plasmids that were reported to be compatible were grouped as the "A-C complex" based on similarities and on strong entry exclusion. However, recently, the term IncA/C has been used frequently to describe plasmids belonging to both of these two groups. Granted that the supporting data was not included in the original reports and that the consensus iteron sequences have since been shown to be essentially identical, we have addressed the question again. The original IncA plasmid, RA1, and the IncC plasmid pRMH760, were introduced into the same cell by transformation, and were found to be maintained stably for over 100 generations in the absence of selection for either plasmid, i.e. they were compatible. We conclude that use of the term IncA/C for this important plasmid group is indeed incorrect and it causes unnecessary confusion. Granted the importance of IncC plasmids in the spread of antibiotic resistance genes, we recommend that use of the misleading terms IncA/C, IncA/C1 and IncA/C2 should cease. In addition, RA1 and pRMH760 were shown to each completely prevent entry of the other via conjugative transfer into the cell they reside in.
Subject(s)
Drug Resistance, Multiple, Bacterial/genetics , Escherichia coli/genetics , Plasmids/chemistry , Transformation, Bacterial , Ampicillin/pharmacology , Anti-Bacterial Agents/pharmacology , Chloramphenicol/pharmacology , Escherichia coli/drug effects , Escherichia coli/metabolism , Microbial Sensitivity Tests , Plasmids/classification , Plasmids/metabolism , Sulfamethoxazole/pharmacology , Terminology as Topic , Tetracycline/pharmacologyABSTRACT
Acinetobacter baumannii is an important nosocomial pathogen that often complicates treatment because of its high level of resistance to antibiotics. Though plasmids can potentially introduce various genes into bacterial strains, compared to other Gram-negative bacteria, information about the unique A. baumannii plasmid repertoire is limited. Here, whole genome sequence data was used to determine the plasmid content of strain A297 (RUH875), the reference strain for the globally disseminated multiply resistant A. baumannii clone, global clone 1(GC1). A297 contains three plasmids. Two known plasmids were present; one, pA297-1 (pRAY*), carries the aadB gentamicin, kanamycin and tobramycin resistance gene and another is an 8.7kb cryptic plasmid often found in GC1 isolates. The third plasmid, pA297-3, is 200kb and carries the sul2 sulphonamide resistance gene and strAB streptomycin resistance gene within Tn6172 and a mer mercuric ion resistance module elsewhere. pA297-3 transferred sulphonamide, streptomycin and mercuric ion resistance at high frequency to a susceptible A. baumannii recipient, and contains several genes potentially involved in conjugative transfer. However, a relaxase gene was not found. It also includes several genes encoding proteins involved in DNA metabolism such as partitioning. However, a gene encoding a replication initiation protein could not be found. pA297-3 includes two copies of a Miniature Inverted-Repeat Transposable Element (MITE), named MITE-297, bracketing a 77.5kb fragment, which contains several IS and the mer module. Several plasmids related to but smaller than pA297-3 were found in the GenBank nucleotide database. They were found in different A. baumannii clones and are wide spread. They all contain either Tn6172 or a variant in the same position in the backbone as Tn6172 in pA297-3. Some related plasmids have lost the segment between the MITE-297 copies and retain only one MITE-297. Others have segments of various lengths between two MITE-297 copies, and these can be derived from the region in pA297-3 via a deletion adjacent to IS related to IS26 such as IS1007 or IS1007-like. pA297-3 and its relatives represent a third type of conjugative Acinetobacter plasmid that contributes to the dissemination of antibiotic resistance in this species.
Subject(s)
Acinetobacter baumannii/drug effects , Acinetobacter baumannii/genetics , Anti-Bacterial Agents/pharmacology , Bacterial Proteins/genetics , Carrier Proteins/genetics , Conjugation, Genetic , Drug Resistance, Bacterial , Genes, Bacterial , Plasmids/genetics , DNA Transposable Elements , Gene Order , Genome, Bacterial , Operon , Streptomycin/pharmacology , Sulfonamides/pharmacologyABSTRACT
Both the Salmonella genomic islands (SGI) and the conjugative IncC plasmids are known to contribute substantially to the acquisition of resistance to multiple antibiotics, and plasmids in the A/C group are known to mobilize the Salmonella genomic island SGI1, which also carries multiple antibiotic resistance genes. Plasmid pRMH760 (IncC; A/C2) was shown to mobilize SGI1 variants SGI1-I, SGI1-F, SGI1-K and SGI2 from Salmonella enterica to Escherichia coli where it was integrated at the preferred location, at the end of the trmE (thdF) gene. The plasmid was transferred at a similar frequency. However, we observed that co-transfer of the SGI and the plasmid was rarer. In E. coli to E. coli transfer, the frequency of transfer of the IncC plasmid pRMH760 was at least 1000-fold lower when the donor carried SGI1-I or SGI1-K, indicating that the SGI suppresses transfer of the plasmid. In addition, pRMH760 was rapidly lost from both E. coli and S. enterica strains that also carried SGI1-I, SGI1-F or SGI2. However, plasmid loss was not seen when the SGI1 variant was SGI1-K, which lacks two segments of the SGI1 backbone. The complete sequence of the SGI1-I and SGI1-F were determined and SGI1-K also carries two single base substitutions relative to SGI1-I. The IncA (A/C1) plasmid RA1 was also shown to mobilize SGI2-A and though there are significant differences between the backbones of IncA and IncC plasmids, RA1 was also rapidly lost when SGI2-A was present in the same cell. We conclude that there are multiple interactions, both cooperative and antagonistic, between an IncA or IncC plasmid and the SGI1 and SGI2 family genomic islands.