EXPLORING THE INCIDENCE AND PREVALENCE OF NEW-ONSET AUTOIMMUNE DISEASE FOLLOWING COVID-19 PANDEMIC: A SYSTEMATIC REVIEW.

The correlation between viral infections and the onset of autoimmune conditions has long attracted the scientific community. With the COVID-19 pandemic impacting the world like never before, we have a unique chance to better understand this complex disease and uncover its origin. In light of this, we performed a systematic review of the incidence and prevalence of newly diagnosed autoimmune diseases following the COVID-19 pandemic. We undertook an extensive literature review from 2012 to 2023, by using electronic databases such as Medline, Web of Science, PubMed, Cochrane Library, and supplementary sources like scholarly articles. Our review encompassed various types of studies, including trials, commentaries, and editorials. To evaluate bias, we adopted a recommended approach, employing a two-part tool to scrutinize five distinct domains: selection bias, performance bias, attrition bias, selective reporting, and other biases. In this review, a total of 14 studies were incorporated. On the basis of the findings of the present investigation, the average age of included patients was approximately 56.13 years, and the maximum were male. After the, meticulous examination we stated that there was a significant increase in inflammatory biomarkers, including ferritin, C-reactive protein (CRP), lactate dehydrogenase (LDH), D-dimer and Interleukins IL-6. The majority of patients had an elevated level of CRP. We conclude that there is a strong association between COVID-19 and a higher risk of various types of autoimmune diseases. In order to develop effective plans for the current pandemic as well as the post-pandemic period that follows, healthcare providers must recognize these autoimmune manifestations.

SIGNIFICANCE OF NEUTROPHIL-LYMPHOCYTE RATIO AND PLATELET-LYMPHOCYTE RATIO AS PROGNOSTIC MARKERS OF DISEASE SEVERITY IN SYSTEMIC LUPUS ERYTHEMATOSUS.

Managing systemic lupus erythematosus (SLE) is challenging because of its diverse symptoms, relapses, and issues related to immunosuppressive therapy. Hence, the management of autoimmune disorder has become a hot topic in this era. Thus, the study aims to predict disease severity in SLE cases by assessing the value of neutrophil-lymphocyte ratio and platelet-lymphocyte ratio. In this study, we included a total of 80 patients, of which 40 were controls and 40 were experimental group. We gathered the demographic data and each patient provided informed consent. Furthermore, the clinical examinations were done, and results were noted. The study compared 40 SLE patients with 40 controls. SLE patients had lower complement levels, higher rates of LN and encephalopathy, and elevated Hs-CRP and ESR. They also showed lower WBC, neutrophil, lymphocyte, and platelet counts, along with higher NLR and PLR. Higher SLEDAI scores correlated with elevated Hs-CRP and ESR, and lower C3. Neutrophils positively correlated with NLR, while lymphocytes negatively correlated with SLEDAI scores, NLR, and PLR. Platelets did not significantly correlate with these markers. SLE patients showed higher rates of LNand encephalopathy, elevated inflammatory markers, and altered blood cell counts. Lower SLEDAI scores correlated with less inflammation and higher C3 levels, potentially indicating disease severity. Neutrophils were closely linked to disease activity, while lymphocytes showed a strong negative correlation. Platelet count was not a significant marker. Understanding these aspects could improve diagnosis and management.

Influence of type 2 diabetes on immunohistochemical detection of TRAF6, cFos and NFATC1 in the gingiva in cases of chronic periodontitis.

Type 2 diabetes (T2D) and chronic periodontitis (CP) are common diseases worldwide. Although T2D increases the severity of CP and alveolar bone loss, the mechanism of this is not well understood. We investigated using immunohistochemistry the expression of three osteoclast proteins, TRAF6, cFos and NFATc1, in gingival tissues. Gingival tissues were obtained from three groups: HC group, healthy controls; CP group, patients with CP; T2D + CP group, patients with both T2D and CP. Strong immunostaining for TRAF6, cFos and NFATc1 was observed in the gingival epithelium as well as in inflammatory cells in the CP and T2D + CP groups. Immunostaining was most intense in the T2D + CP group. We found strong up-regulation of TRAF6, cFos and NFATC1 in gingiva tissue of subjects with both T2D and CP, which corroborates our hypothesis that T2D potentiates osteoclastogenesis in CP.

Surface coated ZnO powder as flame retardant for wood: A short communication.

In the present study, the ability of a coating of zinc oxide (ZnO) powder to improve the fire-safety of wood exposed to radiative heat flux was examined, focusing on the ignition time of the wood. To test ZnO's efficiency on the wood substrate, two different amounts of ZnO (0.5 and 1 g ZnO per dm2) were applied to the wood surface and exposed to radiative heat from a cone calorimeter wherein a pristine piece of wood with no ZnO treatment was taken as control. The experiments were conducted at three different irradiation levels i.e., 20, 35, and 50 kWm-2. The results showed that applying ZnO on the surface of the wood significantly increased the ignition time (TTI). For the three different heat fluxes, using 0.5 g ZnO per dm2 coating on the wood surface increased the TTI by 26-33 %. Furthermore, the application of 1 g of ZnO per dm2 generated a TTI increment of 37-40 %. All three irradiation levels showed similar trends in TTI. The micrographs taken before and after combustion showed no significant disparity in the morphology of ZnO. The agglomerated ZnO particles on the wood surface remained intact after combustion. This study demonstrates a facile method of using ZnO to delay the ignition of wood. This could potentially impart fire-safety to wooden structures/façades in wildland-urban interfaces and elsewhere by reducing flame spread.

Rickettsia africae and other unclassified Rickettsia species of the spotted fever group in ticks of the Western Ghats, India.

The spotted fever group (SFG) of Rickettsia are zoonotic disease-causing pathogens, commonly transmitted by hard ticks to a wide range of hosts, including humans. Rickettsia conorii is the common SFG recognised in India, whereas most of the infections due to other group species go undifferentiated at the species level. Hence, this study was conducted to screen host-seeking ticks in the Western Ghats region, India, for the DNA of SFG Rickettsia. The ticks were collected from Kerala, Goa, and Maharashtra states of India during a survey conducted between November 2017 and January 2018. In total, 288 tick pools were screened for Rickettsia spp. DNA using pan-Rickettsia real-time PCR, and conventional PCR targeting the gltA, OmpA and 17-kDa protein-coding genes. Nucleotide sequences were subjected to phylogenetic analysis using the NCBI BLAST tool to identify submitted sequences with higher homology. Neighbour-joining trees were constructed using the reference sequences of the GenBank database. Overall, Rickettsia spp. DNA was detected in 27.2% (62/228 pools) of host-seeking ticks across the Western Ghats region, with an estimated minimum infection rate of 0.057. Upon phylogenetic analysis, it was identified that the detected sequences were highly similar (> 99% sequence homology) to R. africae, Candidatus R. laoensis and an un-categorised Rickettsia species, and they were widely carried by Haemaphysalis ticks. The current study is the first report of R. africae and Candidatus R. laoensis in ticks in India. Although the pathogenicity of these species is not well documented, they may pose a potential threat to both animal and the human population in this geographical region.

Design, Synthesis, Anti-Tubercular Evaluation and Teratogenicity Studies of Furanyl Pyrazolo[3,4-b] Quinoline-5-Ones.

We have synthesized novel pyrazolo-quinoline analogues (P1-10) in an effort to create newer antitubercular drugs against the rising bacterial resistance. NMR, IR and ESI-MS spectra were utilized to characterize the synthesised compounds. The antitubercular activity of the target compounds was evaluated against Mycobacterium tuberculosis. Six derivatives (P1-6) displayed very significant activity at 1.6 µg/mL concentration and were found to be more active than pyrazinamide standard. Thus, as per the drug susceptibility results the MIC value could be considered between 1.6 and 0.8 µg/mL. In addition, all the synthesised compounds were subjected to molecular docking studies against specific protein, Enoyl acyl carrier protein reductase (InhA) in complex with N-(4-methylbenzoyl)-4-benzylpiperidine, PDB ID: 2NSD. Among all the compounds the most effective compounds were found an Autodock score of 11.6 and 11.2 against 2NSD, respectively. Further, Zebrafish larvae have been used to test the teratogenicity of the synthesised compounds. There were no indications of abnormalities with (P2), (P4), (P5), (P6), and (P10) at 0.5 µM. Supplementary Information: The online version contains supplementary material available at 10.1134/S1068162023010053.

Follmann balanitis - A very rare presentation of primary syphilis.

Syphilis is a sexually transmitted infection caused by Treponema pallidum. The primary stage of the disease manifests as a chancre. Balanoposthitis as a presenting feature of primary syphilis is a very rare presentation. A 26-year-old male presented with asymptomatic erythematous plaques involving the glans and prepuce after unprotected intercourse with a known female. Routine investigations, serology, and dark field examination were normal. Fontana-Masson stain revealed spirochetes and a diagnosis of syphilitic balanitis of Follmann was entertained. This rare presentation accounts for only 0.3%-0.5% of cases of primary syphilis and hence is highlighted in this case report.

Modular electromagnetic railgun accelerator for high velocity impact studies.

A modular electromagnetic railgun accelerator facility named "RAFTAR" (i.e., Railgun Accelerator Facility for Technology and Research) has been commissioned and its performance has been characterized for high velocity impact testing on materials in a single-shot mode. In the first tests, RAFTAR demonstrated an acceleration of more than 1000 m/s for an 8 g solid aluminum-7075 armature projectile. The current fed was 220 kA, having a muzzle time of about 1.75 ms. It is a single pulse breech-fed rectangular bore (14 × 13 mm2) railgun, and its 1.15 m long barrel assembly consists of two parallel copper bars with an inter-gap of 13 mm that are encased within 50 mm thick high strength reinforced fiberglass sheets (Garolite G10-FR4) and bolted from both the sides. RAFTAR is powered by two capacitor bank modules that have a maximum stored energy of 160 kJ each (containing eight 178 µF/15 kV capacitors), two high power ignitron switches, and a pulse shaping inductor. To obtain consistent acceleration of the armature inside the barrel, reversal of driving current is prevented, and its pulse duration is stretched by tactical integration of the crowbar switch and bitter coil inductor in the circuit. Armature projectile velocity measurement in-bore and outside in free space was performed by the time-of-flight technique using indigenously made miniature B-dot sensors and a novel shorting-foil arrangement, respectively. The time resolved measurement of the in-bore armature evidenced a velocity-skin-effect in the high acceleration phase. There is good agreement between the experimentally measured and theoretically predicted efficiency, confirming the optimal choice of operating parameters. The conclusion summarizes important experimental findings and analyzes the underlying causes that limit the performance of railguns.

A study of the influence of current ramp rate on the performance of polymer electrolyte membrane fuel cell.

Durability and reliability are the key factors that prevent fuel cells from successful implementation in automotive sector. Dynamic load change is a common and frequent condition that the fuel cell has to undergo in automotive applications. Fuel cells are more sensitive to changes in load conditions and degrade based on load variation representing idling, rated power, and high power operating conditions. To examine the influence of dynamic load step on the fuel cell performance, two similar cells of active 25 cm2 was tested under two different load step for the same dynamic load cycle. The main difference in dynamic load cycle 2 was the ramp rate which was fixed as 0.1, 0.3, and 0.25 A/cm2/s for 0.2, 0.6, and 1.0 A/cm2 respectively. To investigate the degradative effects, polarization curves, electrochemical impedance spectroscopy, and field emission scanning electron microscopy were used. The results indicated that the degradation rate increased in both dynamic load cycles but however the impact of load change was comparatively minimal in dynamic load cycle 2. The total degradation in performance was 20.67% and 10.72% in dynamic load cycles 1 and 2 respectively. Fuel cell performance degraded in a manner that was consistent with the electrochemical impedance spectroscopy and cross-sectional analysis of field emission scanning electron microscopy. The results prove that the degradation rate is dependent on the load step and the number of load cycles. Severe catalyst degradation and delamination were observed in fuel cells operated under dynamic load cycle 1.

Hyposalivation and oral candidiasis-A short review.

Oral candidiasis is an opportunistic fungal infection commonly encountered in immunocompromised individuals. The oral cavity harbours numerous microbes and along with immunity saliva also maintains oral health. The Candida species form biofilm over the tissue and prosthetic surfaces. The biofilm formation results in persistent colonisation and persistent infection. The saliva in the oral cavity maintains the integrity of the oral environment by washing away the microbes through its flow and with its antimicrobial agents. The significant role of salivary histatins as an antifungal agent diminishes with hyposalivation. The importance of saliva in preventing fungal colonisation and infection is discussed in this review.

Crystal structure, Hirshfeld surface and frontier mol-ecular orbital analysis of 10-benzyl-9-(4-hydroxy-3-meth-oxy-phen-yl)-3,3,6,6-tetra-methyl-3,4,6,7,9,10-hexa-hydro-acridine-1,8(2H,5H)-dione.

In the fused ring system of the title mol-ecule, C31H35NO4, the conformation of the central di-hydro-pyridine ring is inter-mediate between boat and envelope with the N and the opposite C atoms lying out of the basal plane. The conformations of terminal rings are close to envelope, with the atoms substituted by two methyl groups as the flaps. In the crystal, the mol-ecules are linked by O-H⋯O hydrogen bonds into helical chains. The Hirshfeld surface analysis indicates that the most important contributions to the crystal packing are from H⋯H (63.2%), O⋯H/H⋯O (20.1%) and C⋯H/H⋯C (14.4%) contacts. Quantum chemical calculations of the frontier mol-ecular orbitals were carried out to characterize the chemical reactivity of the title compound.

Evolution of Solid Dispersion Technology: Solubility Enhancement Using Hydroxypropyl Methylcellulose Acetate Succinate: Myth or Reality?

Poorly aqueous soluble active pharmaceutical ingredients are highly risky development candidates and remain a concern of pharmaceutical industries in drug discovery and development processes. Pharmaceutical industries are putting significant efforts into the target identification and lead candidate development using combinatorial chemistry. About 40% of compounds arising from combinatorial screening are poorly water soluble. Pharmaceutical industries evolved over this challenge by coming up with reproducible and scalable particle size reduction or by identifying alternate morphs. Another important area where pharmaceutical industries are working is solid dispersion technology. With the emergence of the hot-melt extrusion and spray drying approach, many molecules have been brought to the market using solid dispersion technology from the discovery phase by improving bioavailability and thereby efficacy. Although the solid solution technology in the last 60 years evolved from eutectic mixtures, solid dispersions using water-soluble polymers, and enteric polymers especially hydroxypropyl methylcellulose acetate succinate (HPMCAS), still there is no preformulation tool to identify correct polymer or polymer combination at the early stage of development. Thus, this leads to the urgent need to focus on the design and development of third-generation solid dispersions for the unmet needs of the industries and society.

Twitter sentiment analysis using ensemble based deep learning model towards COVID-19 in India and European countries.

As of November 2021, more than 24.80 crore people are diagnosed with the coronavirus in that around 50.20 lakhs people lost their lives, because of this infectious disease. By understanding the people's sentiment's expressed in their social media (Facebook, Twitter, Instagram etc.) helps their governments in controlling, monitoring, and eradicating the coronavirus. Compared to other social media's, the twitter data are indispensable in the extraction of useful awareness information related to any crisis. In this article, a sentiment analysis model is proposed to analyze the real time tweets, which are related to coronavirus. Initially, around 3100 Indian and European people's tweets are collected between the time period of 23.03.2020 to 01.11.2021. Next, the data pre-processing and exploratory investigation are accomplished for better understanding of the collected data. Further, the feature extraction is performed using Term Frequency-Inverse Document Frequency (TF-IDF), GloVe, pre-trained Word2Vec, and fast text embedding's. The obtained feature vectors are fed to the ensemble classifier (Gated Recurrent Unit (GRU) and Capsule Neural Network (CapsNet)) for classifying the user's sentiment's as anger, sad, joy, and fear. The obtained experimental outcomes showed that the proposed model achieved 97.28% and 95.20% of prediction accuracy in classifying the both Indian and European people's sentiments.

Genetic variability, combining ability and molecular diversity-based parental line selection for heterosis breeding in field corn (Zea mays L.).

BACKGROUND: The demand of maize crop is increasing day by day, hence to reduce the production and demand gap, there is a need to extract the high yielding parental lines to improve per se yield of the hybrids, which could help to enhance the productivity in maize crops. METHODS AND RESULTS: The present investigation was carried out to select the best medium maturing inbred lines, among a set of 118 inbred lines. Based on the Duncan multiple range test, out of 118 lines, 16 inbred lines were selected on the basis of its high yield per se and flowering time. The molecular diversity was carried out using SSR markers linked to heterotic QTL and up on diversity analysis it classified selected genotypes in to three distinct groups. Among the selected inbred lines, a wider genetic variability and molecular diversity were observed. A total of 39 test crosses were generated after classifying 16 inbred lines in to three testers and thirteen lines (based on per se grain yield and molecular diversity) and crossing them in line × tester manner. CONCLUSION: Combining ability analysis of these parental lines showed that female parents, PML 109, PML 110, PML 111, PML 114 and PML 116 showed additive effect for KRN and grain yield, whereas male parents, PML 46, and PML 93 showed epistatic effect for KRN and PML 102 showed epistatic effect for grain yield. The generated information in the present investigation may be exploited for heterosis breeding in filed corn. KEY MESSAGES: To tackle the balanced dietary requirement of Indian population; we focused to enhance the productivity of maize hybrids using genetically broad based, elite, diverse inbred lines. Combination of selection criterion, not only augment the productivity but also improves the quality of hybrid/s.

Crystal structure, Hirshfeld surface and frontier mol-ecular orbital analysis of 9-(3-bromo-4-hy-droxy-5-meth-oxy-phen-yl)-3,3,6,6-tetra-methyl-3,4,5,6,7,9-hexa-hydro-1H-xanthene-1,8(2H)-dione.

In the fused ring system of the title compound, C24H27BrO5, the mean plane and maximum deviations of the central pyran ring are 0.0384 (2) and 0.0733 (2) Å, respectively. The cyclo-hexenone rings both adopt envelope conformations with the tetra-substituted C atoms as flap atoms, whereas the central pyran ring adopts a flattened boat conformation. The central pyran and phenyl substituent rings are almost perpendicular to each other, making a dihedral angle of 89.71 (2)°. In the crystal, pairs of mol-ecules are linked via O-H⋯O hydrogen bonds, forming inversion dimers with an R 2 2(20) ring motif. A Hirshfeld surface analysis indicates that the most important contributions to the crystal packing are from H⋯H (50.6%), O⋯H/H⋯O (22.9%) and C⋯H/H⋯C (11.1%) contacts. Quantum chemical calculations for the frontier mol-ecular orbitals were undertaken to determine the chemical reactivity of the title compound.

Environmental sustainability assessment of biodiesel production from Jatropha curcas L. seeds oil in Pakistan.

According to IPCC Annual Report (AR-5), environmental impact assessment of any product prototype is recommended before its large-scale commercialization; however, no environmental profile analysis of any biodiesel prototype has been conducted in Pakistan. Therefore, objective of this study was to conduct a comprehensive life cycle assessment (LCA), water footprint and cumulative energy demand (CED) of biodiesel production from Jatropha curcas L. (JC) seeds oil in Pakistan. A cradle-to-gate LCA approach was applied for 400 liter (L) JC biodiesel produced in Pakistan. JC biodiesel production chain was divided into three stages i.e., 1). cultivation of JC crop 2). crude oil extraction from JC seeds and 3). crude oil conversion to biodiesel. Primary data for all the stages were acquired through questionnaire surveys, field visits and measurements in the field. Potential environmental impacts were calculated in SimaPro v.9.2 software using Eco-indicator 99 methodology. Results showed that crude oil extraction stage accounted for highest emissions (77%) to the overall environmental impact categories evaluated, followed by oil conversion stage (21%) and JC cultivation stage (02%), respectively. The three stages of JC biodiesel production chain are major contributor to ecotoxicity with a contribution of 57% to this impact category. Higher contribution to ecotoxicity was due to agrochemicals used in the JC cultivation. Similarly, fossil fuels impact category was responsible for 38% of overall environmental impacts. In addition, water footprint of JC biodiesel production chain was 2632.54 m3/reference unit. Cumulative energy required for 400L JC biodiesel production chain was 46745.70 MJ in Pakistan. Fossil diesel consumption, synthetic fertilizers use and purchased electricity were major hotspot sources to environmental burdens caused by JC biodiesel production in Pakistan. By performing sensitivity analysis at 20% reduction of the baseline values of fossil diesel used, synthetic fertilizers and purchased electricity, a marked decrease in environmental footprint was observed. It is highly recommended that use of renewable energy instead of fossil energy would provide environmental benefits such as lower greenhouse gases and other toxic emissions as compared to conventional petroleum fuels. It is also recommended that JC as a biofuel plant, has been reported to have many desired characteristics such as quick growth, easy cultivation, drought resistance, pest and insect resistance, and mainly great oil content in JC seeds (27-40%). Therefore, JC plant is highly recommended to Billion Tree Afforestation Project (BTAP) for plantation on wasteland because it has multipurpose benefits.

Differences of oral cancer in men and women of West Bengal, India.

INTRODUCTION: Oral cancer constitutes a major public health problem in South East Asia, as it causes profound social and economic consequences for people in this area. Nowadays, pattern of tobacco and alcohol use among females is changing and at the same time incidence of oral squamous cell carcinoma (SCC) among females is increasing. OBJECTIVES: The aim of the study was to evaluate the possible differences between male and female patients suffering from oral SCC. MATERIALS AND METHODS: One hundred and sixteen patients with oral SCC, who were diagnosed between 2017 and 2018, were evaluated retrospectively. Special attention was paid to tobacco and alcohol use, as well as to patients without the risk factors. Data obtained were entered into a Microsoft Excel Spreadsheet and then were analyzed by SPSS 24.0. RESULTS: The men: women ratio was 2.5:1. Mean age for diagnosis of oral cancer in men was 57.5 and mean age for diagnosis of oral cancer in women was 46.33. Majority of men oral cancer patients had smoking habits (61.45%) and majority of women oral cancer patients had chewing habits (66.67%). Tongue was the most common site for women oral cancer patients and palate, retromolar area and tonsillar area were the most common site for men oral cancer patients who never used any habit products. CONCLUSION: Compared to earlier studies women gets diagnosis of oral cancer earlier than men in our study. Gutkha use in men and Gudaku use in women were associated with oral cancer in early age. Further studies should be performed in women tongue cancer patients and men patients with cancer of maxillary area, retromolar and tonsillar area without risk factors to find etiology.

Fabrication and Characterization of Physical and Mechanical Properties of Carbon Nanotubes-Graphene-Based Sandwich Composite Pressure Sensor.

In this work, piezoresistive properties of graphene-multiwalled carbon nanotubes (MWCNTs) composites are investigated, characterized, and compared. Sandwich-type composite piezoresistive pressure-sensitive sensors (Ag/Graphene-MWCNT/Ag) with the same diameters, but different fabrication pressures and thicknesses were fabricated using the mortar and pestle/hydraulic press technique. To produce low-electrical-resistance contacts, both sides of the composite sensors were painted with silver (Ag) paste. All the sensors showed reductions in the direct current (DC) resistance 'R' with an increment in external uniaxial applied pressure. However, it was observed that higher fabrication pressure led to a lower resistance value of the composite, while the thicker samples give lower electrical conductivity and higher resistance than the thinner samples. The experimental data for all composite pressure sensors were in excellent agreement with the simulated results.

A study of effect of hemodialysis on macular thickness in patients with end-stage renal disease.

PURPOSE: The purpose was to study the effect of hemodialysis (HD) on macular thickness in patients with diabetic retinopathy (DR) and end-stage renal disease. MATERIALS AND METHODS: In this prospective observational study, patients undergoing HD for diabetic nephropathy were recruited. None of the patients received treatment for DR per se during the study duration. Patients underwent ocular examination and optical coherence tomography before HD and were followed up on day 3 and day 30. At each visit, central subfield macular thickness (CSMT) and total macular volume (TMV) were measured and compared with baseline values using analysis of variance and post hoc test (Wilcoxon's matched-pairs signed-rank test). RESULTS: Thirty-one eyes of 19 patients were recruited in the study. The mean CSMT decreased from baseline value of 278.93 ± 45.01 µ to 239.81 ± 40.54 µ at the end of 30 days (P < 0.005). The mean TMV decreased from baseline value of 8.14 ± 0.68 mm3 to 7.80 ± 0.63 mm3 on day 30 (P < 0.005). CONCLUSION: There was a statistically significant reduction in CSMT and TMV after HD at 30 days as compared to baseline values. HD alone results in reduction of macular thickness over short term.

Management of short clinical crowns by utilizing horizontal groove retentive technique in crown/tooth or both with different luting cements - An analysis on extracted teeth.

PURPOSE: The aim of the present study was to compare and evaluate the retention of dislodged crowns by addition of one horizontal circumferential groove (HCG) to preparation and/or casting and with two luting cements. MATERIALS AND METHODS: A total of 80 recently extracted human maxillary first molar teeth of appropriate sizes were collected and mounted in the resin blocks using surveyor. Standardized full coverage tooth preparations were prepared and impressions were obtained. Dies were prepared for casting and were then subjected to tensile loading using UTM. The data obtained was statistically analyzed. RESULTS: Obtained values were statistically analyzed using ANOVA, STUDENT "t" TEST and BONFERRONI TEST. The results showed that the mean tensile force (TF) was in the range from 49.05 to 264.87 for group A and 255.06 to 588.60 for group B. The highest TF was recorded for subgroup 3B, whereas the lowest for subgroup 1A. CONCLUSION: Within the limitations of the study, it was concluded that by addition of one HCG to tooth preparation or casting and to both showed significant increase in retention, when compared to control groups. The highest retention value was obtained for sample with groove on the internal surface of crown luted with SARC.