Exchange controlled triplet fusion in metal-organic frameworks.

Triplet-fusion-based photon upconversion holds promise for a wide range of applications, from photovoltaics to bioimaging. The efficiency of triplet fusion, however, is fundamentally limited in conventional molecular and polymeric systems by its spin dependence. Here, we show that the inherent tailorability of metal-organic frameworks (MOFs), combined with their highly porous but ordered structure, minimizes intertriplet exchange coupling and engineers effective spin mixing between singlet and quintet triplet-triplet pair states. We demonstrate singlet-quintet coupling in a pyrene-based MOF, NU-1000. An anomalous magnetic field effect is observed from NU-1000 corresponding to an induced resonance between singlet and quintet states that yields an increased fusion rate at room temperature under a relatively low applied magnetic field of 0.14 T. Our results suggest that MOFs offer particular promise for engineering the spin dynamics of multiexcitonic processes and improving their upconversion performance.

Magnetic-Field-Switchable Laser via Optical Pumping of Rubrene.

Volumetric optical imaging of magnetic fields is challenging with existing magneto-optical materials, motivating the search for dyes with strong magnetic field interactions, distinct emission spectra, and an ability to withstand high photon flux and incorporation within samples. Here, the magnetic field effect on singlet-exciton fission is exploited to demonstrate spatial imaging of magnetic fields in a thin film of rubrene. Doping rubrene with the high-quantum yield dye dibenzotetraphenylperiflanthene (DBP) is shown to enable optically pumped, slab waveguide lasing. This laser is magnetic-field-switchable: when operated just below the lasing threshold, application of a 0.4 T magnetic field switches the device between nonlasing and lasing modes, accompanied by an intensity modulation of +360%. This is thought to be the first demonstration of a magnetically switchable laser, as well as the largest magnetically induced change in emission brightness in a singlet-fission material to date. These results demonstrate that singlet-fission materials are promising materials for magnetic sensing applications and could inspire a new class of magneto-optical modulators.

Interfacial Trap-Assisted Triplet Generation in Lead Halide Perovskite Sensitized Solid-State Upconversion.

Photon upconversion via triplet-triplet annihilation (TTA) has promise for overcoming the Shockley-Queisser limit for single-junction solar cells by allowing the utilization of sub-bandgap photons. Recently, bulk perovskites have been employed as sensitizers in solid-state upconversion devices to circumvent poor exciton diffusion in previous nanocrystal (NC)-sensitized devices. However, an in-depth understanding of the underlying photophysics of perovskite-sensitized triplet generation is still lacking due to the difficulty of precisely controlling interfacial properties of fully solution-processed devices. In this study, interfacial properties of upconversion devices are adjusted by a mild surface solvent treatment, specifically altering perovskite surface properties without perturbing the bulk perovskite. Thermal evaporation of the annihilator precludes further solvent contamination. Counterintuitively, devices with more interfacial traps show brighter upconversion. Approximately an order of magnitude difference in upconversion brightness is observed across different interfacial solvent treatments. Sequential charge transfer and interfacial trap-assisted triplet sensitization are demonstrated by comparing upconversion performance, transient photoluminescence dynamics, and magnetic field dependence of the devices. Incomplete triplet conversion from transferred charges and consequent triplet-charge annihilation (TCA) are also observed. The observations highlight the importance of interfacial control and provide guidance for further design and optimization of upconversion devices using perovskites or other semiconductors as sensitizers.

Large Single Crystals of Two-Dimensional π-Conjugated Metal-Organic Frameworks via Biphasic Solution-Solid Growth.

Two-dimensional (2D) π-conjugated metal-organic frameworks (πMOFs) are a new class of designer electronic materials that are porous and tunable through the constituent organic molecules and choice of metal ions. Unlike typical MOFs, 2D πMOFs exhibit high conductivity mediated by delocalized π-electrons and have promising applications in a range of electrical devices as well as exotic physical properties. Here, we develop a growth method that generates single-crystal plates with lateral dimensions exceeding 10 µm, orders of magnitude bigger than previous methods. Synthesis of large single crystals eliminates a significant impediment to the fundamental characterization of the materials, allowing determination of the intrinsic conductivity and mobility along the 2D plane of πMOFs. A representative 2D πMOF, Ni-CAT-1, exhibits a conductivity of up to 2 S/cm, and Hall measurement reveals the origin of the high conductivity. Characterization of crystalline 2D πMOFs creates the foundation for developing electronic applications of this promising and highly diverse class of materials.

Nanocrystal-Sensitized Infrared-to-Visible Upconversion in a Microcavity under Subsolar Flux.

Infrared-to-visible photon upconversion could benefit applications such as photovoltaics, infrared sensing, and bioimaging. Solid-state upconversion based on triplet exciton annihilation sensitized by nanocrystals is one of the most promising approaches, albeit limited by relatively weak optical absorption. Here, we integrate the upconverting layers into a Fabry-Pérot microcavity with quality factor Q = 75. At the resonant wavelength λ = 980 nm, absorption increases 74-fold and we observe a 227-fold increase in the intensity of upconverted emission. The threshold excitation intensity is reduced by 2 orders of magnitude to a subsolar flux of 13 mW/cm2. We measure an external quantum efficiency of 0.06 ± 0.01% and a 2.2-fold increase in the generation yield of upconverted photons. Our work highlights the potential of triplet-triplet annihilation-based upconversion in low-intensity sensing applications and demonstrates the importance of photonic designs in addition to materials engineering to improve the efficiency of solid-state upconversion.

Strategies for High-Performance Solid-State Triplet-Triplet-Annihilation-Based Photon Upconversion.

Photon upconversion via triplet-triplet annihilation (TTA) has achieved high efficiencies in solution and within polymer matrices that support molecular migration systems. It has diverse potential applications including bioimaging, optical sensors, and photovoltaics. To date, however, the reported performance of TTA in rigid solid-state systems is substantially inferior, which may complicate the integration of TTA in other solid-state devices. Here, solid-state loss mechanisms in a green-to-blue upconversion system are investigated, and three specific losses are identified: energy back transfer, sensitizer aggregation, and triplet-charge annihilation. Strategies are demonstrated to mitigate energy back transfer and sensitizer aggregation, and a completely dry-processed solid-state TTA upconversion system having an upconversion efficiency of ≈2.5% (by the convention of maximum efficiency being 100%) at a relatively low excitation intensity of 238 mW cm-2 is reported. This device is the first demonstration of dry-processed solid-state TTA comparable to solution-processed solid-state systems. The strategies reported here can be generalized to other upconversion systems and offer a route to achieving higher-performance solid-state TTA upconversion devices that are compatible with applications sensitive to solvent damage.

Magnetic Domain Wall Based Synaptic and Activation Function Generator for Neuromorphic Accelerators.

Magnetic domain walls are information tokens in both logic and memory devices and hold particular interest in applications such as neuromorphic accelerators that combine logic in memory. Here, we show that devices based on the electrical manipulation of magnetic domain walls are capable of implementing linear, as well as programmable nonlinear, functions. Unlike other approaches, domain-wall-based devices are ideal for application to both synaptic weight generators and thresholding in deep neural networks. Prototype micrometer-size devices operate with 8 ns current pulses and the energy consumption required for weight modulation is ≤16 pJ. Both speed and energy consumption compare favorably to other synaptic nonvolatile devices, with the expected energy dissipation for scaled 20 nm devices close to that of biological neurons.

Exploiting chemistry and molecular systems for quantum information science.

The power of chemistry to prepare new molecules and materials has driven the quest for new approaches to solve problems having global societal impact, such as in renewable energy, healthcare and information science. In the latter case, the intrinsic quantum nature of the electronic, nuclear and spin degrees of freedom in molecules offers intriguing new possibilities to advance the emerging field of quantum information science. In this Perspective, which resulted from discussions by the co-authors at a US Department of Energy workshop held in November 2018, we discuss how chemical systems and reactions can impact quantum computing, communication and sensing. Hierarchical molecular design and synthesis, from small molecules to supramolecular assemblies, combined with new spectroscopic probes of quantum coherence and theoretical modelling of complex systems, offer a broad range of possibilities to realize practical quantum information science applications.

Discovery of blue singlet exciton fission molecules via a high-throughput virtual screening and experimental approach.

Singlet exciton fission is a mechanism that could potentially enable solar cells to surpass the Shockley-Queisser efficiency limit by converting single high-energy photons into two lower-energy triplet excitons with minimal thermalization loss. The ability to make use of singlet exciton fission to enhance solar cell efficiencies has been limited, however, by the sparsity of singlet fission materials with triplet energies above the bandgaps of common semiconductors such as Si and GaAs. Here, we employ a high-throughput virtual screening procedure to discover new organic singlet exciton fission candidate materials with high-energy (>1.4 eV) triplet excitons. After exploring a search space of 4482 molecules and screening them using time-dependent density functional theory, we identify 88 novel singlet exciton fission candidate materials based on anthracene derivatives. Subsequent purification and characterization of several of these candidates yield two new singlet exciton fission materials: 9,10-dicyanoanthracene (DCA) and 9,10-dichlorooctafluoroanthracene (DCOFA), with triplet energies of 1.54 eV and 1.51 eV, respectively. These materials are readily available and low-cost, making them interesting candidates for exothermic singlet exciton fission sensitization of solar cells. However, formation of triplet excitons in DCA and DCOFA is found to occur via hot singlet exciton fission with excitation energies above ∼3.64 eV, and prominent excimer formation in the solid state will need to be overcome in order to make DCA and DCOFA viable candidates for use in a practical device.

Sensitization of silicon by singlet exciton fission in tetracene.

Silicon dominates contemporary solar cell technologies1. But when absorbing photons, silicon (like other semiconductors) wastes energy in excess of its bandgap2. Reducing these thermalization losses and enabling better sensitivity to light is possible by sensitizing the silicon solar cell using singlet exciton fission, in which two excited states with triplet spin character (triplet excitons) are generated from a photoexcited state of higher energy with singlet spin character (a singlet exciton)3-5. Singlet exciton fission in the molecular semiconductor tetracene is known to generate triplet excitons that are energetically matched to the silicon bandgap6-8. When the triplet excitons are transferred to silicon they create additional electron-hole pairs, promising to increase cell efficiencies from the single-junction limit of 29 per cent to as high as 35 per cent9. Here we reduce the thickness of the protective hafnium oxynitride layer at the surface of a silicon solar cell to just eight angstroms, using electric-field-effect passivation to enable the efficient energy transfer of the triplet excitons formed in the tetracene. The maximum combined yield of the fission in tetracene and the energy transfer to silicon is around 133 per cent, establishing the potential of singlet exciton fission to increase the efficiencies of silicon solar cells and reduce the cost of the energy that they generate.

A Heterogeneous Kinetics Model for Triplet Exciton Transfer in Solid-State Upconversion.

High internal quantum efficiency semiconductor nanocrystal (NC)-based photon upconversion devices are currently based on a single monolayer of active NCs. Devices are therefore limited in their external quantum efficiency based on the low number of photons absorbed. Increasing the number of photons absorbed is expected to increase the upconversion efficiency, yet experimentally increasing the number of layers does not appreciably increase the upconverted light output. We unravel this mystery by combining kinetic modeling and transient photoluminescence spectroscopy. The inherent energetic disorder stemming from the polydispersity of the NCs means that the kinetics are governed by a stochastic transfer matrix. By drawing the rates from a probabilistic distribution and constructing a reaction network with realistic connectivity, we are able to fit complex photoluminescence traces with a very simple model. We use this model to explain the thickness-dependent performance of the upconversion devices and can attribute the reduced efficiencies to the low excitonic diffusivity of the exciton within the NC layers and increased back transfer of the created singlets from the organic annihilator rubrene. We suggest some avenues for overcoming these limitations in future devices.

Using lead chalcogenide nanocrystals as spin mixers: a perspective on near-infrared-to-visible upconversion.

The process of upconversion leads to emission of photons higher in energy than the incident photons. Near-infrared-to-visible upconversion, in particular, shows promise in sub-bandgap sensitization of silicon and other optoelectronic materials, resulting in potential applications ranging from photovoltaics that exceed the Shockley-Queisser limit to infrared imaging. A feasible mechanism for near-infrared-to-visible upconversion is triplet-triplet annihilation (TTA) sensitized by colloidal nanocrystals (NCs). Here, the long lifetime of spin-triplet excitons in the organic materials that undergo TTA makes upconversion possible under incoherent excitation at relatively low photon fluxes. Since this process relies on optically inactive triplet states, semiconductor NCs are utilized as efficient spin mixers, absorbing the incident light and sensitizing the triplet states of the TTA material. The state-of-the-art system uses rubrene with a triplet energy of 1.14 eV as the TTA medium, and thus allows upconversion of light with photon energies above ∼1.1 eV. In this perspective, we review the field of lead sulfide (PbS) NC-sensitized near-infrared-to-visible upconversion, discuss solution-based upconversion, and highlight progress made on solid-state upconversion devices.

Shorter Exciton Lifetimes via an External Heavy-Atom Effect: Alleviating the Effects of Bimolecular Processes in Organic Light-Emitting Diodes.

Multiexcited-state phenomena are believed to be the root cause of two exigent challenges in organic light-emitting diodes; namely, efficiency roll-off and degradation. The development of novel strategies to reduce exciton densities under heavy load is therefore highly desirable. Here, it is shown that triplet exciton lifetimes of thermally activated delayed-fluorescence-emitter molecules can be manipulated in the solid state by exploiting intermolecular interactions. The external heavy-atom effect of brominated host molecules leads to increased spin-orbit coupling, which in turn enhances intersystem crossing rates in the guest molecule. Wave function overlap between the host and the guest is confirmed by combined molecular dynamics and density functional theory calculations. Shorter triplet exciton lifetimes are observed, while high photoluminescence quantum yields and essentially unaltered emission spectra are maintained. A change in the intersystem crossing rate ratio due to increased dielectric constants leads to almost 50% lower triplet exciton densities in the emissive layer in the steady state and results in an improved onset of the photoluminescence quantum yield roll-off at high excitation densities. Efficient organic light-emitting diodes with better roll-off behavior based on these novel hosts are fabricated, demonstrating the suitability of this concept for real-world applications.

3D-Printed Self-Folding Electronics.

Self-transforming structures are gaining prominence due to their general ability to adopt programmed shapes each tailored for specific functions. Composites that self-fold have so far relied on using the stimuli-responsive mechanisms focusing on reversible shape change. Integrating additional functions within these composites can rapidly enhance their practical applicability; however, this remains a challenging problem. Here, we demonstrate a method for spontaneous folding of three-dimensional (3D)-printed composites with embedded electronics at room temperature. The composite is printed using a multimaterial 3D-printing process with no external processing steps. Upon peeling from the print platform, the composite self-shapes itself using the residual forces resulting from polymer swelling during the layer-by-layer fabrication process. As a specific example, electrochromic elements are printed within the composite and can be electrically controlled through its folded legs. Our shape-transformation scheme provides a route to transform planar electronics into nonplanar geometries containing the overhangs. Integrating electronics within complex 3D shapes can enable new applications in sensing and robotics.

The Spatial Resolution Limit for an Individual Domain Wall in Magnetic Nanowires.

Magnetic nanowires are the foundation of several promising nonvolatile computing devices, most notably magnetic racetrack memory and domain wall logic. Here, we determine the analog information capacity in these technologies, analyzing a magnetic nanowire containing a single domain wall. Although wires can be deliberately patterned with notches to define discrete positions for domain walls, the line edge roughness of the wire can also trap domain walls at dimensions below the resolution of the fabrication process, determining the fundamental resolution limit for the placement of a domain wall. Using a fractal model for the edge roughness, we show theoretically and experimentally that the analog information capacity for wires is limited by the self-affine statistics of the wire edge roughness, a relevant result for domain wall devices scaled to regimes where edge roughness dominates the energy landscape in which the walls move.

Speed Limit for Triplet-Exciton Transfer in Solid-State PbS Nanocrystal-Sensitized Photon Upconversion.

Hybrid interfaces combining inorganic and organic materials underpin the operation of many optoelectronic and photocatalytic systems and allow for innovative approaches to photon up- and down-conversion. However, the mechanism of exchange-mediated energy transfer of spin-triplet excitons across these interfaces remains obscure, particularly when both the macroscopic donor and acceptor are composed of many separately interacting nanoscopic moieties. Here, we study the transfer of excitons from colloidal lead sulfide (PbS) nanocrystals to the spin-triplet state of rubrene molecules. By reducing the length of the carboxylic acid ligands on the nanocrystal surface from 18 to 4 carbon atoms, thinning the effective ligand shell from 13 to 6 Å, we are able to increase the characteristic transfer rate by an order of magnitude. However, we observe that the energy transfer rate asymptotes for shorter separation distances (≤10 Å) which we attribute to the reduced Dexter coupling brought on by the increased effective dielectric constant of these solid-state devices when the aliphatic ligands are short. This implies that the shortest ligands, which hinder long-term colloidal stability, offer little advantage for energy transfer. Indeed, we find that hexanoic acid ligands are already sufficient for near-unity transfer efficiency. Using nanocrystals with these optimal-length ligands in an improved solid-state device structure, we obtain an upconversion efficiency of (7 ± 1)% with excitation at λ = 808 nm.

Thermally Activated Delayed Fluorescence and Aggregation Induced Emission with Through-Space Charge Transfer.

Emissive molecules comprising a donor and an acceptor bridged by 9,9-dimethylxanthene, were studied (XPT, XCT, and XtBuCT). The structures position the donor and acceptor with cofacial alignment at distances of 3.3-3.5 Å wherein efficient spatial charge transfer can occur. The quantum yields were enhanced by excluding molecular oxygen and thermally activated delayed fluorescence with lifetimes on the order of microseconds was observed. Although the molecules displayed low quantum yields in solution, higher quantum yields were observed in the solid state. Crystal structures revealed π-π intramolecular interactions between a donor and an acceptor, however, the dominant intermolecular interactions were C-H···π, which likely restrict the molecular dynamics to create aggregation-induced enhanced emission. Organic light emitting devices using XPT and XtBuCT as dopants displayed electroluminescence external quantum efficiencies as high as 10%.

Designing a Broadband Pump for High-Quality Micro-Lasers via Modified Net Radiation Method.

High-quality micro-lasers are key ingredients in non-linear optics, communication, sensing and low-threshold solar-pumped lasers. However, such micro-lasers exhibit negligible absorption of free-space broadband pump light. Recently, this limitation was lifted by cascade energy transfer, in which the absorption and quality factor are modulated with wavelength, enabling non-resonant pumping of high-quality micro-lasers and solar-pumped laser to operate at record low solar concentration. Here, we present a generic theoretical framework for modeling the absorption, emission and energy transfer of incoherent radiation between cascade sensitizer and laser gain media. Our model is based on linear equations of the modified net radiation method and is therefore robust, fast converging and has low complexity. We apply this formalism to compute the optimal parameters of low-threshold solar-pumped lasers. It is revealed that the interplay between the absorption and self-absorption of such lasers defines the optimal pump absorption below the maximal value, which is in contrast to conventional lasers for which full pump absorption is desired. Numerical results are compared to experimental data on a sensitized Nd3+:YAG cavity, and quantitative agreement with theoretical models is found. Our work modularizes the gain and sensitizing components and paves the way for the optimal design of broadband-pumped high-quality micro-lasers and efficient solar-pumped lasers.

Plexciton Dirac points and topological modes.

Plexcitons are polaritonic modes that result from the strong coupling between excitons and plasmons. Here, we consider plexcitons emerging from the interaction of excitons in an organic molecular layer with surface plasmons in a metallic film. We predict the emergence of Dirac cones in the two-dimensional band-structure of plexcitons due to the inherent alignment of the excitonic transitions in the organic layer. An external magnetic field opens a gap between the Dirac cones if the plexciton system is interfaced with a magneto-optical layer. The resulting energy gap becomes populated with topologically protected one-way modes, which travel at the interface of this plexcitonic system. Our theoretical proposal suggests that plexcitons are a convenient and simple platform for the exploration of exotic phases of matter and for the control of energy flow at the nanoscale.

Red Phosphorescence from Benzo[2,1,3]thiadiazoles at Room Temperature.

We describe the red phosphorescence exhibited by a class of structurally simple benzo[2,1,3]thiadiazoles at room temperature. The photophysical properties of these molecules in deoxygenated cyclohexane, including their absorption spectra, steady-state photoluminescence and excitation spectra, and phosphorescence lifetimes, are presented. Time-dependent density functional theory calculations were carried out to better understand the electronic excited states of these benzo[2,1,3]thiadiazoles and why they are capable of phosphorescence.