Photo-thermal effects initiate multi-level energy conversion in "solid-solid" phase-changing fibers.

The current textiles primarily employ passive heat barriers to minimize heat loss and achieve effective thermal insulation for human beings. Accordingly, intelligent fibers with energy storage and temperature control capabilities have garnered significant attention due to their potential to revolutionize textile technology. The study integrates the photo-thermal effect and phase change energy storage materials onto a fiber, thereby fabricating a fully intelligent energy storage fiber. This innovation enables the multi-level conversion of sunlight: "Optical energy - Thermal energy - Phase transition energy - Thermal energy". The intelligent fiber efficiently converts solar energy into heat energy through the photo-thermal coupling of CuNPs, subsequently inducing a spatial conformational change in the solid-solid phase change material within the fiber for effective heat storage. The hybrid fiber possesses enhanced mechanical properties but also exhibits a significantly high phase transition enthalpy value of 49.75 J g-1 and a phase transition temperature suitable for human body temperature (20.19-30.21 °C), especially the fiber is more durable. The photo-thermal conversion test vividly demonstrates the systematic transformation of four distinct forms of energy within the composite fiber. This approach holds significant potential for advancing the field of smart fiber technology.

Sodium alginate-based high conductive, ultra-stretchable hydrogel fibers for electrolytes of flexible solid-state supercapacitors.

The flexibility and safety of energy storage systems are crucial, and hydrogels as one of the most promising candidates for solid-state electrolytes. We present a conductive hydrogel based on sodium alginate that exhibits ultra-stretchable (4200 %) and high conductivity (16.3 S m-1). The mechanical properties of the conductive hydrogel are achieved by optimizing the topology of the sodium alginate and harnessing the synergistic effect of non-covalent interaction among different components. And a conductive structure within hydrogels was successfully established through the synergistic combination of ion and metal nanoparticles. The flexible supercapacitor (FSC) with conductive hydrogel as solid electrolytes demonstrated an area-specific capacitance of up to 274.28 mF cm-2 at a current density of 1 mA cm-2. And the energy density of the FSC is as high as 187 µWh cm-2 at a power density of 1.2 mW cm-2. The voltage range of the FSC is also extended to 1.4 V. The FSC also exhibited exceptional flexibility and stability, including insensitivity to bending angles and remarkable cycle durability (82.4 % after 10,000 cycles). The study presents a novel design for the development of solid-state electrolytes, with the aim of creating a new generation of FSC that exhibit superior safety and high energy density.

Construction of chitosan/alginate aerogels with three-dimensional hierarchical pore network structure via hydrogen bonding dissolution and covalent crosslinking synergistic strategy for thermal management systems.

To replace traditional petrochemical-based thermal insulation materials, in this work, the chitosan (CHI)/alginate (ALG) (CA) aerogels with three-dimensional hierarchical pore network structure were constructed by compositing CHI and ALG using a synergistic strategy of hydrogen bonding dissolution and covalent crosslinking. The structure and properties were further regulated by crosslinking the CA aerogels with epichlorohydrin (ECH). The CA aerogels exhibited various forms of covalent crosslinking, hydrogen bonding and electrostatic interactions, with hydrogen bonding content reaching 79.12 %. The CA aerogels showed an excellent three-dimensional hierarchical pore network structure, with an average pore size minimum of 15.92 nm. The structure regulation of CA aerogels obtained excellent compressive properties, with an increase of stress and strain by 137.61 % and 45.05 %, which can support a heavy object 5000 times its weight. Additionally, CA aerogels demonstrate excellent thermal insulation properties and low thermal conductivity, comparable to commercially available insulation materials. More importantly, CA aerogels have good cyclic insulation stability and thermal properties, and they have a flame retardancy rating of V-0, which shows the stability of insulation properties and excellent safety. CA aerogels provide new ideas for the development of biomass thermal insulation materials and are expected to be candidates for thermal management applications.

The regulation of CuSNPs' interface for further enhancing mechanical and photothermal conversion properties of chitosan/@CuSNPs hybrid fibers.

Our previous study has demonstrated that the microstructure of copper sulfide nanoparticles (CuSNPs) can be controlled to enhance mechanical and photothermal conversion properties of chitosan (CS)/CuSNPs hybrid fibers. However, achieving optimal dispersion and compatibility of CuSNPs within a CS matrix remains a challenge, this study aims to improve dispersion and compatibility by modifying the CuSNPs' interface, thereby enhancing mechanical and photothermal conversion properties of hybrid fibers. The interfaces of @CuSNPs (CuS@Xylan NPs, CuS@SA NPs, and CuS@PEG NPs) contain hydroxyl groups, facilitating the hydrogen bonds formation with the CS matrix. The dispersibility is further enhanced by the synergistic effect of xylan and SA's anionic charges with cationic chitosan. Notably, the viscosity of the CS/@CuSNPs hybrid spinning solution is significantly enhanced, resulting in improved breaking strength for initial hybrid fibers. Specifically, the breaking strength of CS/CuS@Xylan NPs hybrid fibers reaches 1.4 cN/dtex, exhibiting a 42.86 % and 20.6 % increase over CS and CS/CuSNPs hybrid fibers. Simultaneously, the CS/CuS@Xylan NPs hybrid fibers exhibit exceptional photothermal conversion performance, surpassing that of CS fibers by 5.2 times and CS/CuSNPs hybrid fibers by 1.4 times. The regulation of interface modification is an efficient approach to enhance the tensile strength and photothermal conversion properties of CS/CuSNPs hybrid fibers.

Low-temperature superelastic, anisotropic, silane-crosslinked sodium alginate aerogel for thermal insulation.

Bio-aerogels have attracted much attention owing to their remarkable properties, but their brittle and poor elasticity has limited their further applications. Here, we propose a strategy of in-situ silanization crosslinking combined with unidirectional freeze casting (SUFC) to prepare superelastic sodium alginate (SA) aerogels. The resulting aerogel was ultra-light (0.048 g/cm3), high porosity (96.86 %), and self-extinguishing from fire. Aerogels exhibited anisotropic properties, such as low-temperature elasticity (500 g compression at -70 °C 10-cycle, 99.6 % recovery), exceptional fatigue resistance (100-cycle at 50 % strain), and excellent thermal insulation (0.0696 W·m-1·K-1). Thus, the SUFC strategy provides considerable freedom for constructing multi-material, lamellar/honeycomb structured alginate-based aerogels, which pave the way to thermal insulation development at low temperatures.

In-situ growth of zinc sulfide on the surface of alginate-based biomass carbon: A new material for removing methylene blue/basic fuchsin and copper ions.

This work aims to prepare a composite adsorbent with a fixed shape to improve the performance of carbon materials and to solve the problem of adsorbent in powder form which is difficult to recycle after use. The BC-ZnS composite system was successfully prepared by hydrothermal method based on the preparation of biomass carbon (BC) using alginate (Alg), while the ZnS component was grown in-situ on the surface of BC. The effects of Alg, Zn source, hydrothermal temperature and time on the synthesis of BC-ZnS were explored, the results indicated that ZnS was successfully grown in-situ on the BC surface, while the BC maintained its original morphology. BC-ZnS showed excellent adsorption capacity for methylene blue (MB), basic fuchsin (BF), and copper ions (Cu2+), reaching 301.50 mg/g for MB and exhibiting good cyclic stability. The adsorption of MB/BF/Cu2+ by BC-ZnS was characterized by the presence of multiple forces, where the BC component mainly depended on the electrostatic force of Alg residue, while the ZnS involves electrostatic forces, ion exchange and Lewis acid/base soft-soft interactions. The adsorption process conforms to pseudo-first-kinetics and is a spontaneous entropy-increasing process. BC-ZnS can be a candidate for reusable wastewater treatment and has excellent potential for application.

Molybdenum disulfide nanoflowers - doped sodium alginate/polyvinyl alcohol porous xerogel for methylene blue and copper ion adsorption.

In order to improve the adsorption performance of MoS2, as well as to solve the problems of MoS2-powder in adsorption, which is prone to agglomeration and difficulty to be recycled, we prepared MoS2-nanoflowers(MoS2-NFs), and mixed them with sodium alginate/polyvinyl alcohol(SA/PVA) to prepare MoS2-NFs/SA/PVA xerogel(MSP) by freezing-lyophilization. Then two forms of xerogels - block-MSP(MSPB) and spherical-MSP(MSPS) were prepared, and they were used as methylene blue(MB) and Cu2+ adsorbent. It was found that MoS2-NFs were evenly dispersed inside the SA/PVA with no agglomeration, while the interior of MSPB/MSPS showed the structure of parallel-pores and radial-pores, respectively. The adsorption capacity of MSPB/MSPS on MB can reach 233 mg/g, which is five times higher than SA/PVA-gel, showing excellent synergistic-adsorption effect, and the adsorption capacity for Cu2+ reaches 271 mg/g. The adsorption mechanism indicated that the adsorption of MB by MSPB/MSPS conformed to pseudo-first-order model, with electrostatic force as the main force. And their adsorption of Cu2+ conformed to pseudo-second-order model and was dominated by Lewis acid/base soft-soft interactions. Notably, after long-term adsorption, MSPB/MSPS maintains its shape and more than 90 % of the adsorption capacity, ensuring the recovery and reuse of materials. So, MSPB/MSPS has great potential in adsorption, providing a new solution for sewage purification.

Chitosan/copper sulfide nanoparticles (CS/CuSNPs) hybrid fibers with improved mechanical and photo-thermal conversion properties via tuning CuSNPs' morphological structures.

Conventional textiles are inadequate for maintaining warmth in extremely cold conditions. Therefore, the development of photo-thermal fibers for personal thermal management textiles has emerged as an urgent need. Herein, novel chitosan/copper sulfide nanoparticles (CS/CuSNPs) hybrid fibers with photo-thermal function were fabricated successfully. Significantly, our study demonstrated that the tensile and photo-thermal conversation properties of the CS/CuSNPs hybrid fibers could be effectively regulated by altering the CuSNPs` morphological structures. Compared with other CuSNPs (tube-like, sphere-like, and flower-like), the plate-like CuSNPs with smooth surfaces and uniform nanometer size played a significant role by scattering incident light in the fibers as a secondary light source for CuSNPs absorbance. Thus, under IR light irradiation at a power density of 1.0 W/cm2, the surface temperature of CS/0.1 wt% plate-like CuSNPs hybrid fibers sharply increased by 27.6 °C, which was more than 4 times of the pure CS fibers. And the breaking strength and initial modulus of CS/0.1 wt% plate-like CuSNPs hybrid fibers increased by more than 18.37 and 6.88 % compared with the nascent CS fibers. This study develops a novel and effective strategy to tune the photo-thermal and tensile properties of CS hybrid fibers without incorporating more content or additives.

Selection and validation of internal control genes for quantitative real-time RT‒qPCR normalization of Phlebopus portentosus gene expression under different conditions.

Phlebopus portentosus (Berk. and Broome) Boedijn is an attractive edible mushroom and is considered the only bolete for which artificial cultivation in vitro has been achieved. Gene expression analysis has become widely used in research on edible fungi and is important for elucidating the functions of genes involved in complex biological processes. Selecting appropriate reference genes is crucial to ensuring reliable RT‒qPCR gene expression analysis results. In our study, a total of 12 candidate control genes were selected from 25 traditional housekeeping genes based on their expression stability in 9 transcriptomes of 3 developmental stages. These genes were further evaluated using geNorm, NormFinder, and RefFinder under different conditions and developmental stages. The results revealed that MSF1 domain-containing protein (MSF1), synaptobrevin (SYB), mitogen-activated protein kinase genes (MAPK), TATA-binding protein 1 (TBP1), and SPRY domain protein (SPRY) were the most stable reference genes in all sample treatments, while elongation factor 1-alpha (EF1), actin and ubiquitin-conjugating enzyme (UBCE) were the most unstably expressed. The gene SYB was selected based on the transcriptome results and was identified as a novel reference gene in P. portentosus. This is the first detailed study on the identification of reference genes in this fungus and may provide new insights into selecting genes and quantifying gene expression.

LC/MS- and GC/MS-based metabolomic profiling to determine changes in flavor quality and bioactive components of Phlebopus portentosus under low-temperature storage.

Introduction: Low temperature is the most common method used to maintain the freshness of Phlebopus portentosus during long-distance transportation. However, there is no information regarding the nutritional changes that occur in P. portentosus preserved postharvest in low temperature. Methods: In this study, the changes in flavor quality and bioactive components in fruiting bodies stored at 4 °C for different storage periods were determined through LC/MS and GC/MS analyses. Sampling was performed at 0, 3, 5, 7, and 13 days storage. Results and Discussion: Based on the results, the metabolites present in caps and stipes were different at the same period and significantly different after 7 days of storage. A total of 583 and 500 different metabolites were detected in caps and stipes, respectively, and were mainly lipids and lipid-like molecules, organic acids and derivatives, organic oxygen compounds and others. Except for prenol lipids and nucleotides, the expression levels of most metabolites increased with longer storage time. In addition, geosmin was identified as the major contributor to earthy-musty odors, and the level of geosmin was increased when the storage time was short. Conclusion: The variations in these metabolites might cause changes in flavor quality and bioactive components in P. portentosus. Variations in these metabolites were thoroughly analyzed, and the results revealed how storage processes affect the postharvest quality of P. portentosus for the first time.

Cervical Discometry: A Useful Technique for an Anterior Cervical Discectomy and Fusion.

Background and Objectives: Anterior cervical discectomy and fusion (ACDF), which is widely used in the treatment of cervical spondylosis, may cause complications such as adjacent segment degeneration (ASD). However, such studies on complications are limited, and quantitative evidence is still lacking. To evaluate the clinical value of cervical discometry combined with adjacent intraoperative intradiscal pressure in cervical vertebral surgery through clinical explorations. Materials and Methods: In this retrospective study, 100 patients who were treated with anterior decompression, reconstruction, and internal fixation, were enrolled. Among them, 50 patients received ACDF combined with perioperative pressure adjustment of the adjacent segments to ensure that the pressure difference was less than 5 mmHg. The other 50 patients who had only simple ACDF were considered as the control group. Patient information, radiographic changes, axial symptoms (AS), and the occurrence of ASD were recorded in the study. Results: The degree of lordosis (D values) at postoperative of all cases were positive. The D value of the two groups of patients immediately after the operation and at the last follow-up were significantly higher than that before the operation (P < 0.05). The incidence of AS was significantly lower in the experimental group than that in the control group (P < 0.05). Besides, there were only 10 patients in the experimental group during the five-year follow-up period, which was significantly lower than the 19 patients in the control group (P < 0.05). Conclusions: The intraoperative intervertebral disc pressure measurement could effectively monitor the vertebral body distraction strength and reduce the incidence of postoperative AS and ASD.

Sodium alginate/chitosan-coated TiO2NPs hybrid fiber with photocatalytic self-cleaning property, UV resistance and enhanced tensile strength.

SA/CS-coated TiO2NPs hybrid fibers with photocatalytic self-cleaning properties, UV resistance and enhanced tensile strength were successfully prepared by adding CS-coated TiO2NPs to SA matrix. The FTIR and TEM results demonstrate the successful preparation of CS-coated TiO2NPs core-shell structured composite particles. SEM and Tyndall effect results showed that the core-shell particles were uniformly dispersed in the SA matrix. When the content of Core-shell particles increased from 0.1 to 0.3 wt%, the tensile strength of SA/CS-coated TiO2NPs hybrid fibers increased from 26.89 to 64.45 % compared with SA/TiO2NPs hybrid fibers. The SA/CS-coated TiO2NPs hybrid fiber (0.3 wt%) exhibits excellent photocatalytic degradation performance, achieving a 90 % degradation rate for the RhB solution. And the fibers also exhibit outstanding photocatalytic degradation performance towards various dyes and stains commonly encountered in daily life, including methyl orange, malachite green, Congo red, coffee and mulberry juice. The UV transmittance of the SA/CS-coated TiO2NPs hybrid fibers decreased significantly from 90 % to 75 % with the increase in core-shell particle addition, and correspondingly, the UV absorption capacity increased. The SA/CS-coated TiO2NPs hybrid fibers prepared lay the groundwork for potential applications in various fields, including textiles, automotive engineering, electronics and medicine.

Dual-stimuli responsive skin-core structural fibers with an in situ crosslinked alginate ester for hydrophobic drug delivery.

To solve the problems of low bioavailability and low intestinal release efficiency of curcumin as a hydrophobic drug in the treatment of diabetes, a novel alginate ester/Antarctic krill protein/2-formylphenylboronic acid (AE/AKP/2-FPBA) skin-core structural fiber with pH and glucose stimulation responsiveness was prepared by an acid-catalyzed polyol in situ crosslinked phase separation method as a drug delivery system. The reaction mechanism and apparent morphology of the fiber were studied. The controlled release ability of the fiber in simulated liquids was evaluated. AE targeted the release of curcumin by pH stimulation; the release amount in the simulated colonic fluid reached 100%, while the release amount in the simulated digestive fluid was less than 12%. 2-FPBA controlled the release rate of curcumin by glucose stimulation, which increases with the increase of 2-FPBA content. Moreover, the cytotoxicity test confirmed that the skin-core structural fiber was non-toxic. These results suggest that skin-core structural fibers have great potential as curcumin delivery systems.

Development of cell adhesive and inherently antibacterial polyvinyl alcohol/polyethylene oxide nanofiber scaffolds via incorporating chitosan for tissue engineering.

Currently, polyvinyl alcohol (PVA) and polyethylene oxide (PEO), as tissue engineering scaffolds materials, had been widely studied, however the hard issues in cell adhesive and antimicrobial properties still seriously limited their application in biomedical respects. Herein, we solved both hard issues by incorporating chitosan (CHI) into the PVA/PEO system, and successfully prepared PVA/PEO/CHI nanofiber scaffolds via electrospinning technology. First, the hierarchical pore structure and elevated porosity stacked by nanofiber of the nanofiber scaffolds supplied suitable space for cell growth. Significantly, the PVA/PEO/CHI nanofiber scaffolds (the cytotoxicity of grade 0) effectively improved cell adhesion by regulating the CHI content, and presented positively correlated with the CHI content. Besides, the excellent surface wettability of PVA/PEO/CHI nanofiber scaffolds exhibited maximum absorbability at a CHI content of 15 wt%. Based on the FTIR, XRD, and mechanical test results, we studied the semi-quantitative effect of hydrogen content on the aggregated state structure and mechanical properties of the PVA/PEO/CHI nanofiber scaffolds. The breaking stress of the nanofiber scaffolds increased with increasing CHI content, and the maximum value reached 15.37 MPa, increased by 67.61 %. Therefore, such dual biofunctional nanofiber scaffolds with improved mechanical properties showed great potential application in tissue engineering scaffolds.

Chitosan grafting coumarin-3-carboxylic acid fluorescent fiber with enhanced strength prepared by in-situ wet-spinning.

Chitosan grafting coumarin-3-carboxylic acid (CS-g-CCA) fiber with fluorescent function and enhanced tensile strength was successfully prepared by in-situ wet-spinning. FTIR and NMR results demonstrate that CCA is successfully grafted onto the CS molecule chains. As the grafting rate increases from 4.2 to 15.8 %, the spinning solution viscosity increases from 22 to 54 Pa·s. SEM observations show that the CS and CS-g-CCA fiber surfaces and cross-sections exhibit homogeneity and smoothness. Likewise, as the drawing ratio increases from 1.0 to 1.4, 2D WAXS patterns illustrate the molecular chain oriented significantly along the drawing direction. The CS-g-CCA fiber (the grafting rate of 15.8 %) exhibits a maximum breaking strength of 1.06 cn/dtex, increasing by 20 % more than the CS fiber. Meanwhile, it has a peak fluorescence intensity of around 480 nm. In addition, the continuous preparation process simplifies the technological route and improves the preparation efficiency of CS-g-CCA fiber. As-prepared CS-g-CCA fiber with enhanced tensile strength and elevated fluorescence efficiency lays the foundation for potential application in fluorescent probes, anti-counterfeiting, and biomedicine fields.

Two new species of Fistulina (Agaricales, Basidiomycota) from the Northern Hemisphere.

Phylogenetic and morphological analyses on samples of Fistulina from East Asia and North America were carried out, and two new species were described, namely, Fistulina americana and Fistulina orientalis, both previously known as Fistulina hepatica. The former is characterized by lateral stipitate basidiocarps, relatively small pores (7-8 per mm), a monomitic hyphal system with both clamp connections and simple septa, and ellipsoid basidiospores of 4-4.8 × 3-3.3 µm, and the species has been found on Quercus in North-East USA. F. orientalis is characterized by lateral stipitate basidiocarps, very small pores (11-12 per mm) with pruinose dissepiments, a monomitic hyphal system with both clamp connections and simple septa, and ovoid to subglobose basidiospores of 3-4 × 2.7-3 µm, and the species has been found on Castanopsis in East Asia. Phylogenetically, samples of F. americana and F. orientalis form two new lineages nested in the Fistulina clade.

Surgical strategy of lumbopelvic instrumentation in the treatment of lumbosacral tuberculosis: S2-alar-iliac screws vs iliac screws.

The objective of this study was to evaluate the feasibility and clinical outcomes of S2-alar-iliac (S2AI) and iliac screw (IS) techniques in the lumbopelvic reconstruction of lumbosacral tuberculosis patients. From January 2014 to August 2016, 26 patients with lumbosacral tuberculosis attending the 8th Medical Centre of Chinese PLA General Hospital were included in this retrospective study. The subjects were divided into two groups based on the lumbopelvic fixation type (16 patients in the S2AI group, 10 patients in the IS group). The operation time, blood loss, length of hospitalisation, erythrocyte sedimentation rate (ESR), C-reactive protein (CRP) level, visual analogue scale (VAS), Oswestry Disability Index (ODI), ambulatory status, and 36-Item Short-Form Health Survey (SF-36) scores of the patients in two groups were recorded and compared. In addition, surgical complications were collected and analysed. The operation time and intraoperative blood loss were significantly lower in the S2AI group than that in the IS group (P < .05). Compared with preoperative data, postoperative data showed significant improvement in ESR, CRP level, ODI scores, VAS scores, ambulatory status, and SF-36 (P < .05), but there was no significant difference in remission degree between the two groups. Compared with IS group, The S2AI group had significantly lower rates of symptomatic screw prominence (P < .05). Both the IS and S2AI fixation techniques can achieve satisfactory outcomes for the restoration of lumbosacral stability of lumbosacral tuberculosis. Furthermore, compared to the traditional IS fixation technique, the S2AI fixation technique can shorten operation time and reduce surgical trauma for the treatment of lumbosacral tuberculosis.

The complete mitochondrial genome of the edible mushroom Grifola frondosa.

The culinary-medicinal mushroom Grifola frondosa is widely cultivated in East Asia. In this study, the complete mitochondrial genome of G. frondosa was determined using Illumina sequencing. The circular molecule was 197,486 bp in length with a content of 25.01% GC, which was one of the largest mitochondrial genomes in the order Polyporales. A total of 39 known genes encoding 13 common mitochondrial genes, 24 tRNA genes, 1 ribosomal protein s3 gene (rps3), and 1 DNA polymerase gene (dpo) were predicted in this genome. The phylogenetic analysis showed that G. frondosa clustered together with Sparassis crispa, Laetiporus sulphureus, Wolfiporia cocos, and Taiwanofungus camphoratus. The complete mitochondrial genome reported here may provide new insight into genetic information and evolution for further studies.

Whole-Genome and Transcriptome Sequencing of Phlebopus portentosus Reveals Its Associated Ectomycorrhizal Niche and Conserved Pathways Involved in Fruiting Body Development.

Phlebopus portentosus (Berk. and Broome) Boedijin, a widely consumed mushroom in China and Thailand, is the first species in the order Boletaceae to have been industrially cultivated on a large scale. However, to date, the lignocellulose degradation system and molecular basis of fruiting body development in P. portentosus have remained cryptic. In the present study, genome and transcriptome sequencing of P. portentosus was performed during the mycelium (S), primordium (P), and fruiting body (F) stages. A genome of 32.74 Mb with a 48.92% GC content across 62 scaffolds was obtained. A total of 9,464 putative genes were predicted from the genome, of which the number of genes related to plant cell wall-degrading enzymes was much lower than that of some saprophytic mushrooms with specific ectomycorrhizal niches. Principal component analysis of RNA-Seq data revealed that the gene expression profiles at all three stages were different. The low expression of plant cell wall-degrading genes also confirmed the limited ability to degrade lignocellulose. The expression profiles also revealed that some conserved and specific pathways were enriched in the different developmental stages of P. portentosus. Starch and sucrose metabolic pathways were enriched in the mycelium stage, while DNA replication, the proteasome and MAPK signaling pathways may be associated with maturation. These results provide a new perspective for understanding the key pathways and hub genes involved in P. portentosus development.

M1 macrophage-derived exosomes aggravate bone loss in postmenopausal osteoporosis via a microRNA-98/DUSP1/JNK axis.

Macrophages (Mφs) are master regulators of the immune response and may serve as therapeutic targets in aging societies. This study aimed to determine the function of M1Mφ-exosomes (Exos) in the development of osteoporosis (OP) and the involvement of microRNA (miR)-98 and dual specificity phosphatase 1 (DUSP1). A murine model of OP was established using ovariectomies (OVX). Bone loss was observed in OVX-treated mice, as manifested by reduced bone mineral density and decreased number of bone trabecula. The bone loss was further aggravated by treatment with M1Mφ-Exos. Exos also suppressed osteogenic differentiation of MC3T3-E1 cells. miRNA microarray analysis revealed that the miR-98 level was notably upregulated in cells after Exo treatment, and DUSP1 was confirmed as a target of miR-98. Meanwhile, downregulation of miR-98 or upregulation of DUSP1 restored the osteogenic differentiation ability of MC3T3-E1 cells. In addition, upregulation of DUSP1 reduced bone loss in murine bone tissues and suppressed JNK phosphorylation. In summary, M1Mφ-derived exosomal miR-98 exacerbates bone loss and OP by downregulating DUSP1 and activating the JNK signaling pathway. miR-98 may therefore serve as a therapeutic target in OP management.