Comparison of Four Different Dental Implant Removal Techniques in Terms of the Weight and Volume of Bone Loss.

PURPOSE: Several approaches have been suggested for implant removal. However, further research is necessary to review data regarding the amount of bone removed and the duration of removal time for different procedures. This study evaluates and compares various implant removal techniques.  Materials and methods: A polyurethane block was scanned to create an implant surgical guide. Afterward, implant-guided surgery was performed on 60 simulated bone blocks. The implants were then separated into four groups and removed utilizing the counter-torque ratchet, trephine drills, burs, and piezosurgery. RESULTS: For the weight of bone loss, there were significant differences in the median between the counter-torque ratchet technique (CTRT) and trephine (p < 0.01), CTRT and bur (p < 0.01), trephine and piezo (p < 0.01), and bur and piezo (p = 0.04). All groups, except CTRT and the piezo group, demonstrated a statistically significant difference (p < 0.01) in the procedure durations. Regarding the volume of bone loss, a statistically significant difference (p < 0.01) was found between each group.  Conclusions: CTRT showed the least amount of bone loss. On the other hand, the trephine technique was demonstrated to be the fastest. It is essential to consider the limitations and risks when choosing the approach for implant removal.

The Impact of Technology Teaching in the Dental Predoctoral Curriculum on Students' Perception of Digital Dentistry.

The goal was to assess dental students' perception of digital technologies after participating in a CAD/CAM exercise for scanning, designing, and manufacturing computer-aided provisional fixed dental restorations. A survey was conducted among second- (pre-D2 and post-D2), first- (D1, negative control), third-, and fourth-year dental students (D3 and D4, positive controls). Only OSU College of Dentistry students who completed the activity and completed the surveys were included. Seven questions were rated, which evaluated changes in knowledge, skill, interest, the importance of technology availability in an office, patients' perception of technology, the importance of having the technology, and the expected frequency of clinics utilizing the technology. Statistical analysis was performed with a significance level of 0.05. A total of 74 pre-D2 and 77 post-D2 questionnaires were completed. Additionally, 63 D1, 43 D3, and 39 D4 participants responded to the survey. Significant differences were found for "knowledge" and "skill" between the pre-D2 and post-D2 and pre-D2 and control groups (p < 0.001). There was a significant difference between the post-D2 participants and all the controls in terms of "interest" (p = 0.0127) and preference for in-practice technology availability (p < 0.05). There were significant results between the post-D2 participants and all the controls regarding the importance of technology availability in an office (p < 0.001) and the expected frequency of clinics utilizing the technology (p = 0.01). No significance was found for "value of technology to patients" and "the importance of having the technology". The presence of technology in practice and in educational academic environments significantly improved students' interest and perception of their knowledge and skill.

Evaluation of the effectiveness and practicality of erbium lasers for ceramic restoration removal: A retrospective clinical analysis.

BACKGROUND: The purpose of this study was to assess the effectiveness and practicality of erbium lasers in the removal of ceramic restorations and appliances from natural teeth and dental implant abutments in clinical practice. METHODS: A retrospective analysis was conducted, involving 29 clinical cases with a total of 52 abutments requiring the removal of various ceramic restorations. The analysis evaluated the clinical procedures performed, including the type and material of the prosthetic, the type of cement used, laser setting parameters, retrieval time, and retrieval success. RESULTS: Out of the 52 abutments, 50 were successfully retrieved without causing any damage (>95%) using either an Er,Cr:YSGG laser (N = 6) or an Er:YAG laser (N = 46). In one case, a crown was partially sectioned to prevent any negative impact of laser irradiation on the adhesive strength between the post and tooth, and in another case, a fracture occurred during debonding. The restorations consisted of 13 lithium disilicate and 39 zirconia units, including six veneers, 38 single crowns, and three fixed partial dentures (FPDs). The retrieval time varied depending on the restoration type, material thickness, cement type, retention form/fitting of the abutment and restoration, ranging from 2.25 ±0.61 minutes for veneers, 6.89 ±8.07 minutes for crowns, to 25 ±10 minutes per abutment for FPDs. Removal of a zirconia crown required more time, 7.12±8.91 minutes, compared to a lithium disilicate crown, 5.86 ±2.41 minutes. The debonding time was influenced by the laser settings as well as materials and types of prosthesis. CONCLUSIONS: Erbium lasers present a safe and effective alternative to invasive methods for removing ceramic restorations, without causing harm to the abutment or prosthesis. Laser-assisted debonding allows for recementation of the restorations during the same appointment, making it a conservative and viable option for ceramic crown retrieval in clinical settings.

The effect of crowding on the accuracy of 3-dimensional printing.

INTRODUCTION: The purpose of this study was to evaluate the accuracy of 3-dimensional (3D) printed aligners compared to conventional vacuum-formed thermoplastic aligners with varying levels of dental crowding. METHODS: Digital intraoral scans of 10 cases were assigned to their respective groups (n = 10, each, 30 total) as follows: no crowding (control), moderate crowding, and severe crowding. Digital images of these models were created in standard tessellation language (STL) file format using 3Shape software and randomly 3D printed. The STL files of each case were also sent to a dental laboratory to fabricate vacuum-formed samples, the current technology used for manufacturing aligners. The intaglio surfaces of fabricated aligners in both groups were scanned using cone beam computed tomography to create STL files, which were then compared to the original STL files of the cases using Geomagic Control X software. Absolute deviations from the original file and root mean square values were recorded. A Kruskal-Wallis test was conducted to analyze the difference in average deviation, and a t-test was repeated for the RMS measure. The significance level was set at 0.05. RESULTS: The crowding did not affect the trueness of aligners manufactured using 3D printing or conventional vacuum-forming techniques (P = 0.79). 3D-printed aligners showed less deviation than the vacuum-formed samples (0.1125 mm vs 0.1312 mm; P <0.01). Aligners manufactured with the vacuum-forming technique had significantly higher variation than those with the 3D printing process (P = 0.04). CONCLUSIONS: 3D aligners printed directly from an STL file exhibited better precision and trueness than those fabricated using the conventional vacuum-forming technique. Since accuracy is defined as a combination of precision and trueness, it is concluded that direct printing from an STL file can be used to manufacture aligners.

Evaluation of Prosthetic Outcomes and Patient Satisfaction With 3D-Printed Implant-Supported Fixed Prosthesis.

OBJECTIVES: The objectives of this study were to quantify the number and type of prosthetic complications associated with 3D-printed implant-supported fixed prostheses (3DISFP) and to evaluate patient satisfaction and oral health-related quality of life over a four-month period. METHODS:  Fifteen edentulous patients who underwent implant therapy were included in the study. Each patient received a 3D-printed prosthesis using OnX dental resin. Prosthetic complications were documented, and data from the 14-item Oral Health Impact Profile (OHIP) questionnaire were collected at two time points: at enrollment and during a four-month recall. RESULTS: During the four-month evaluation period, a total of nine complications were recorded, with three classified as catastrophic failures. Statistical analysis revealed statistically significant differences in OHIP scores between the preoperative and postoperative assessments (p<0.001). CONCLUSION: Within the limitations of this study, it can be concluded that utilizing 3D-printed prostheses with OnX resin represents a viable alternative for long-term implant-supported temporaries. The patients experienced a significant improvement in their oral health-related quality of life. These results suggest that 3D printing technology, combined with the use of OnX resin, holds promise in providing satisfactory clinical outcomes and enhanced patient satisfaction. However, it is important to acknowledge the limitations of this study, and further research is warranted to validate these findings and explore the long-term performance and durability of 3D-printed implant-supported fixed prostheses. This study contributes to the growing body of evidence supporting the effectiveness of 3D printing technology in implant dentistry. The results highlight the potential of 3DISFP with OnX resin to improve oral health-related quality of life in edentulous patients. Continued advancements in 3D printing materials and techniques will likely expand the utilization of these prostheses, ultimately benefiting patients in need of implant-supported restorations.

Accuracy of 3D printed scan bodies for dental implants using two additive manufacturing systems: An in vitro study.

This study compared the accuracy of implant scan bodies printed using stereolithography (SLA) and digital light processing (DLP) technologies to the control (manufacturer's scan body) Scan bodies were printed using SLA (n = 10) and DLP (n = 10) methods. Ten manufacturer's scan bodies were used as control. The scan body was placed onto a simulated 3D printed cast with a single implant placed. An implant fixture mount was used as standard. The implant positions were scanned using a laboratory scanner with the fixture mounts, manufacturer's scan bodies, and the printed scan bodies. The scans of each scan body was then superimposed onto the referenced fixture mount. The 3D angulation and linear deviations were measured. The angulation and linear deviations were 1.24±0.22° and 0.20±0.05 mm; 2.63±0.82° and 0.34±0.11 mm; 1.79±0.19° and 0.32±0.03 mm; for the control, SLA, and DLP, respectively. There were statistical differences (ANOVA) among the three groups in the angular (p<0.01) or linear deviations (p<0.01). Box plotting, 95% confidence interval and F-test suggested the higher variations of precision in the SLA group compared to DLP and control groups. Scan bodies printed in-office have lower accuracy compared to the manufacturer's scan bodies. The current technology for 3D printing of implant scan bodies needs trueness and precision improvements.

Occlusive and Proliferative Properties of Different Collagen Membranes-An In Vitro Study.

Different collagen barrier membranes come in various sources and crosslinking that may affect barrier function and tissue integration. This study investigated barrier function and tissue integration of the three different collagen membranes (Jason®: porcine pericardium, GENOSS: bovine tendon, and BioMend® Extend: cross-linked bovine tendon) with human gingival fibroblasts. The barrier function and tissue integration properties were determined under confocal microscopy. Morphological characteristics were observed using scanning electron microscopy. Our results showed that all collagen membranes allowed a small number of cells to migrate, and the difference in barrier function ability was not significant. The cross-linked characteristics did not improve barrier ability. The native collagen membrane surfaces allowed evenly scattered proliferation of HGF, while the cross-linked collagen membrane induced patchy proliferation. Statistically significant differences in cell proliferation were found between Jason and BioMend Extend membranes (p = 0.04). Scanning electron microscope showed a compact membrane surface at the top, while the bottom surfaces displayed interwoven collagen fibers, which were denser in the crosslinked collagen membranes. Within the limitations of this study, collagen membranes of different origins and physical properties can adequately prevent the invasion of unwanted cells. Native collagen membranes may provide a better surface for gingival cell attachment and proliferation.

Deep learning: A primer for dentists and dental researchers.

OBJECTIVES: Despite deep learning's wide adoption in dental artificial intelligence (AI) research, researchers from other dental fields and, more so, dental professionals may find it challenging to understand and interpret deep learning studies, their employed methods, and outcomes. The objective of this primer is to explain the basic concept of deep learning. It will lay out the commonly used terms, and describe different deep learning approaches, their methods, and outcomes. METHODS: Our research is based on the latest review studies, medical primers, as well as the state-of-the-art research on AI and deep learning, which have been gathered in the current study. RESULTS: In this study, a basic understanding of deep learning models and various approaches to deep learning is presented. An overview of data management strategies for deep learning projects is presented, including data collection, data curation, data annotation, and data preprocessing. Additionally, we provided a step-by-step guide for completing a real-world project. CONCLUSION: Researchers and clinicians can benefit from this study by gaining insight into deep learning. It can be used to critically appraise existing work or plan new deep learning projects. CLINICAL SIGNIFICANCE: This study may be useful to dental researchers and professionals who are assessing and appraising deep learning studies within the field of dentistry.

Influence of Metal Guide Sleeves on the Accuracy and Precision of Dental Implant Placement Using Guided Implant Surgery: An In Vitro Study.

PURPOSE: Metal sleeves are commonly used in implant guides for guided surgery. Cost and sleeve specification limit the applications. This in vitro study examined the differences in the implant position deviations produced by a digitally designed surgical guide with no metal sleeve in comparison to a conventional one with a metal sleeve. MATERIALS AND METHODS: The experiment was conducted in two steps for each step: n = 20 casts total, 10 casts each group; Step 1 to examine one guide from each group with ten implant placements in a dental cast, and Step 2 to examine one guide to one cast. Implant placement was performed using a guided surgical protocol. Postoperative cone-beam computed tomography images were made and were superimposed onto the treatment-planning images. The implant horizontal and angulation deviations from the planned position were measured and analyzed using t-test and F-test (p = 0.05). RESULTS: For Step 1 and 2, respectively, implant deviations for the surgical guide with sleeve were -0.3 ±0.17 mm and 0.15 ±0.23 mm mesially, 0.60 ±1.69 mm, and -1.50 ±0.99 mm buccolingual at the apex, 0.20 ±0.47 mm and -0.60 ±0.27 mm buccolingual at the cervical, and 2.73° ±4.80° and -1.49° ±2.91° in the buccolingual angulation. For Step 1 and 2, respectively, the implant deviations for the surgical guide without sleeve were -0.17 ±0.14 mm and -0.06 ±0.07 mm mesially, 0.35 ±1.04 mm and -1.619 ±1.03 mm buccolingual at the apex, 0.10 ±0.27 mm and -0.62 ±0.27 mm buccolingual at the cervical, and 1.73° ±3.66° and -1.64° ±2.26° in the buccolingual angulation. No statistically significant differences were found in any group except for mesial deviation of the Step 2 group (F-test, p < 0.001). CONCLUSIONS: A digitally designed surgical guide with no metal sleeve demonstrates similar accuracy but higher precision compared to a surgical guide with a metal sleeve. Metal sleeves may not be required for guided surgery.

Influence of the Residual Ridge Widths and Implant Thread Designs on Implant Positioning Using Static Implant Guided Surgery.

PURPOSE: Aggressive implant macrothread designs have been widely used. However, the effects of the aggressive thread design on the accuracy of static guided surgery, especially in a case of narrow residual ridge, have not been well-studied. The aim of this study was to evaluate the effects of two different implant macrothread designs and the residual ridge widths on the accuracy of tooth-supported static guided implant surgery. MATERIALS AND METHODS: Forty implant fixtures with two different macrodesigns: a conventional thread design bone level tapered (BLT), and an aggressive thread design bone level tapered (BLX) were placed in 40 simulated polyurethane models with narrow and wide residual ridges. The placed implant positions were compared with the planned implant position and angulational deviation, as well as three-dimensional (3D) deviations at the entry and apex of the implant were measured. One-way ANOVA with Tukey's multiple comparisons (ɑ = 0.05) were used to determine level of significance between the mean and variance deviation values. 95% confidence intervals and box plots were used to demonstrate the means and ranges of precision. RESULTS: In terms of angulational deviation, there was no statistically significant difference in the mean deviations for both types of implants, p = 1.55 and p = 0.84 for wide and narrow ridge groups, respectively. However, the range of deviation was much larger in the narrow ridge of the BLX group compared to the BLT group. In both narrow ridge and wide ridge, the BLX group had lower mean 3D deviation values at both the entry and the apex with statistically significant differences for both entry point of the wide ridge (p = 0.027) and narrow ridge (p = 0.022) as well as at the apex of the wide ridge (p = 0.006) but not the apex of the narrow ridge (p = 0.142). CONCLUSION: The aggressive larger thread design of dental implants may influence the accuracy of implant placement more than the ridge dimension.

Influence of implant diameter on accuracy of static implant guided surgery: An in vitro study.

STATEMENT OF PROBLEM: Static guided implant surgery may be the most accurate method of implant placement to date. However, within the same guided implant system, whether accuracy is affected when placing a larger diameter implant that requires more drills than a smaller diameter implant is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the influence of implant diameter on the angulation and 3-dimensional (3D) deviations of posterior single implant placement using static guided surgery. MATERIAL AND METHODS: A polyurethane dental cast was made with an edentulous site at the maxillary right first molar position. Identical implant planning for each of 3 dental implant diameters 3.3, 4.1, and 4.8 mm (Straumann BLT) were made, and surgical guides for each implant diameters were fabricated by stereolithography. Fifteen implants of each diameter (N=45) were placed in simulated casts. A scan body was placed and the cast was scanned using an intraoral scanner. The positional discrepancies of implant placement, including angulation as well as 3D implant cervical and apex area deviations, were compared with the planned position. Linear ANOVA single factor analysis (ɑ=.05) was used, and box plots were made. RESULTS: The ranges of angulation deviations for 3.3-, 4.1-, and 4.8-mm implants were 3.6 degrees to 6.0 degrees, 3.7 degrees to 7.7 degrees, and 3.1 degrees to 6.7 degrees, respectively. The ranges of 3D implant entry deviations of 3.3-, 4.1-, and 4.8-mm implants were 0.96 to 1.4, 0.85 to 1.72, and 0.89 to 1.78 mm, respectively. The ranges of 3D implant apex of 3.3-, 4.1-, and 4.8-mm implants were 0.63 to 1.21, 0.64 to 1.48, and 0.48 to 1.27 mm, respectively. No statistically significant differences were found in any of the 3 measurements: P=.67 for deviation in angulation; P=.27 for 3D implant deviation of entry; and P=.3 for 3D implant deviation of the apex. CONCLUSIONS: Implant diameters had no significant effect on placement deviations when a single posterior static guided surgery was used.

Antimicrobial Efficacy of Silver Diamine Fluoride against Enterococcus faecalis: A Systematic Review of In Vitro Studies.

Introduction/Objectives. Enterococcus faecalis has been implicated in infections of treated root canals. Current irrigants and intracanal medicaments cannot eliminate E. faecalis completely from the root canal. Silver diamine fluoride (SDF) prevents caries by promoting remineralization and exerting an antibacterial effect. Studies suggest that SDF may possess antibacterial properties against E. faecalis. The purpose of this review is to systematically and critically analyze the literature, focusing on the use of SDF as an intracanal medicament or irrigant, when compared to other antibacterial agents. Data/Sources. The focused question was "Is the antibacterial effect of SDF against E. faecalis better than other intracanal medicaments and irrigants?" Using the keywords ((silver diamine fluoride) AND (Enterococcus faecalis)) AND ((sodium hypochlorite) OR (NaOCl) OR (chlorhexidine) OR (calcium hydroxide) OR (Ca(OH)2)), an electronic search was conducted on the following databases: PubMed/MEDLINE, ISI Web of Science, Scopus, EMBASE, and Google Scholar. The clinical trial registers ClinicalTrials.gov and CONTROL were also searched using the same keywords. General characteristics and outcomes were extracted, and quality of the studies was assessed using the Preferred Reporting Items for Laboratory studies in Endodontology (PRILE) guidelines. Study Selection. Six articles (five in vitro studies and one ex vivo study) were included in this systematic review. In the majority of the studies, SDF had equal or better antibacterial efficacy against E. faecalis compared to calcium hydroxide, sodium hypochlorite, and chlorhexidine. However, the majority of the studies did not fulfill several items in the PRILE criteria and had numerous sources of bias. Conclusions. Within the limitations of the systematic review and the studies reviewed, SDF may be effective against E. faecalis and therefore could be used as an intracanal medicament and/or irrigant to prevent reinfections of the root canals and improve the outcomes of endodontic treatment. However, animal and clinical studies should be carried out to determine the efficacy of SDF in endodontics. Trial Registration. The protocol for this review was registered on PROSPERO. Registration number: CRD42021224741.

Erbium laser-assisted ceramic debonding: a scoping review.

PURPOSE: Removal of ceramic restorations and appliances can be time consuming, invasive, and inconvenient. Erbium lasers offer an alternative noninvasive method for debonding of ceramic appliances. This paper aims to provide a comprehensive review of current literature on the effectiveness of erbium lasers for removal of ceramic restorations and appliances from natural teeth and dental implants. METHODS: A comprehensive search of 7 databases, including Medline (Ovid), Embase, Dentistry and Oral Sciences Source (DOSS), Web of Science, Cochrane Library, and ProQuest Dissertations and Theses was performed. The inclusion and exclusion criteria were agreed prior to the literature search. Two reviewers independently screened the title and abstract. A third reviewer then broke the tie, if any. The selected articles then underwent full text review and the data was extracted. RESULTS: The search identified 4117 unique articles published through June 10, 2021. Studies were assessed and categorized based on the type of restoration/appliance, type of abutment, type of laser, laser settings, efficacy of debonding, and pulpal temperature rise. Thirty-eight full-text articles were reviewed for inclusion. Time for ceramic debonding varies depending on the type of restorations and materials. Removal of zirconia crowns from teeth and implant abutments requires a longer period of time compared to lithium disilicate crowns. Temperature increases were reported as 5.5 degrees or less. Laser setting and laser type affect the debonding time and the increase in temperature. Examinations of debonded ceramics demonstrated no known structural damages resulting from laser applications. CONCLUSIONS: Erbium lasers are effective noninvasive tools to remove all ceramic restorations/appliances from natural teeth and implant abutments without causing harm to abutments. Laser-assisted debonding should be considered as a viable alternative to rotary instrumentation for ceramic crowns; however, clinical studies of erbium-assisted ceramic retrieval are needed.

Salivary Metabolomics of Well and Poorly Controlled Type 1 and Type 2 Diabetes.

Objective: The concentrations of endogenous metabolites in saliva can be altered based on the systemic condition of the hosts and may, in theory, serve as a reflection of systemic disease progression. Hemoglobin A1C is used clinically to measure long-term average glycemic control. The aim of the study was to demonstrate if there were differences in the salivary metabolic profiles between well and poorly controlled type 1 and type 2 subjects with diabetes. Subjects and Methods. Subjects with type 1 and type 2 diabetes were enrolled (n = 40). The subjects were assigned to phenotypic groups based on their current level of A1C: <7 = well-controlled and >7 = poorly controlled. Demographic data, age, gender, and ethnicity, were used to match the two phenotypic groups. Whole saliva samples were collected and immediately stored at -80°C. Samples were spiked using an isotopically labeled internal standard and analyzed by UPLC-TOF-MS using a Waters SYNAPT G2-Si mass spectrometer. Results: Unsupervised principal components analysis (PCA) and orthogonal partial least squares regression discrimination analysis (OPLS-DA) were used to define unique metabolomic profiles associated with well and poorly controlled diabetes based on A1C levels. Conclusion: OPLS-DA demonstrates good separation of well and poorly controlled in both type 1 and type 2 diabetes. This provides evidence for developing saliva-based monitoring tools for diabetes.

Insufficient Evidence to Ascertain the Long-Term Survival of PEEK Dental Prostheses: A Systematic Review of Clinical Studies.

INTRODUCTION: Polyetheretherketone (PEEK) is a polymer that is used in the construction of orthopaedic and dental implants. It is also used to construct removable and fixed dental prostheses due to its superior mechanical and esthetic properties compared to conventional materials. This systematic review aims to analyse and appraise the literature concerning PEEK dental prostheses critically. METHODS: The following focused question was constructed 'Are dental prostheses made of PEEK inferior to those made of other materials in terms of clinical- and patient-reported outcomes?'. The CONSORT (Consolidated Standards of Reporting Trials) tool was used for the quality assessment of the randomised clinical trials. The STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) quality assessment tool was used to assess the quality of observational studies and the case reports were evaluated using the CARE (Case Report) guidelines. RESULTS: A total of 12 studies were included in this review. Two case studies received an overall grade of medium and the overall quality of six studies was graded as 'low'. All three observational studies and the only randomised controlled trial received scores of 'medium'. CONCLUSION: PEEK-based dental prostheses may provide a viable and more esthetic alternative to conventional prosthodontic appliances. However, within the limitations of this study is the evidence to ascertain the long-term viability of PEEK-based dental prostheses. Future studies should focus on conducting large-scale, multicenter trials to compare the survival rate of PEEK prostheses to that of conventionally available prosthodontic appliances.

In Vitro Study of Laser-Assisted Prefabricated Ceramic Crown Debonding as Compared to Traditional Rotary Instrument Removal.

This study compared the laser and rotary removals of prefabricated zirconia crowns in primary anterior and permanent posterior teeth. Sixty-two extracted teeth were prepared for prefabricated zirconia crowns cemented with resin-modified glass-ionomer cement. Specimens underwent crown removals by a rotary handpiece, or erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser. Pulpal temperatures, removal times, and scanning electron microscopy (SEM) examinations were compared. The average crown removal time for rotary and laser methods was 80.9 ± 19.36 s and 353.3 ± 110.6 s, respectively, for anterior primary teeth; and 114.2 ± 32.1 s and 288.5 ± 76.1 s, respectively, for posterior teeth (p < 0.001). The maximum temperature for the rotary and laser groups was 22.2 ± 8.5 °C and 27.7 ± 1.6 °C for anterior teeth, respectively (p < 0.001); and 21.8 ± 0.77 °C and 25.8 ± 0.85 °C for the posterior teeth, respectively (p < 0.001). More open dentinal tubules appeared in the rotary than the laser group. The rotary handpiece removal method may be more efficient than the laser with lower pulpal temperature changes. However, the laser method does not create noticeable tooth or crown structural damage compared to the rotary method.

Comparison of 3-dimensional printing technologies on the precision, trueness, and accuracy of printed retainers.

INTRODUCTION: This study aimed to evaluate the differences in the precision, trueness, and accuracy of 3-dimensional (3D) printed clear orthodontic retainers fabricated using printer systems with different printing technologies. METHODS: Retainers (n = 15) were 3D printed using 4 different printers: stereolithography (SLA), digital light processing (DLP), continuous DLP, and polyjet photopolymer (PPP) printers. Printed retainers were transformed into a digital image through a cone-beam computed tomography scan and compared with the original image using 3D superimposition analysis software. At previously chosen landmarks (R6, L6, R3, L3, R1, and L1), intaglio surfaces of the retainers were compared to that of the reference model. The intercanine and the intermolar width measurements were also assessed. A discrepancy of up to 0.25 mm between the printed retainer and the reference retainer intaglio surfaces indicated accuracy and clinical acceptability. Precision and trueness were also determined. Root mean square and percent of points within the tolerance level were calculated for precision and trueness for each retainer. Statistical significance was set at P <0.05. RESULTS: Interrater correlation coefficient indicated good agreement. Statistically significant differences were found between printer types among the 6 landmarks and the arch width measurements. When evaluating tolerance level and root mean square, statistically significant differences in median precision and trueness among each printer type were found. CONCLUSION: Retainers fabricated by SLA, DLP, continuous DLP, and PPP technologies were shown to be clinically acceptable and accurate compared to the standard reference file. Based on both high precision and trueness, SLA and PPP printers yielded the most accurate retainers.

Effect of print angulation on the accuracy and precision of 3D-printed orthodontic retainers.

INTRODUCTION: The study aimed to (1) compare the accuracy and precision of 3-dimensional (3D) printed retainers at various angulations and (2) evaluate the effect of angulation on printing time and the amount of resin consumed. METHODS: Using a stereolithography 3D printer, 60 clear retainers were printed at 5 angulations (n = 12, each): 15°, 30°, 45°, 60°, and 90°. Samples for each group were randomly printed in a batch of 6 retainers at all print angulations as print 1 and print 2 cycles. Digital images of the original and printed samples were superimposed. Discrepancies on 8 landmarks were measured by 2 independent examiners, and 0.25 mm was set as the clinically acceptable threshold to determine the accuracy of the retainers. RESULTS: Deviations ranged from 0.074 mm to 0.225 mm from the reference retainer at the cusp tips and incisal edges at all angulations, falling within the threshold of clinical acceptance. However, smooth surface measurements with deviations up to 0.480 mm were deemed clinically not acceptable. Three-dimensional printing at 15° was estimated to be the most time-efficient, whereas 3D printing at 45° was shown to be the most cost-effective setting. CONCLUSIONS: Three-dimensional printed retainers, using a stereolithography printer, were found to be accurate within 0.25 mm at all print angulations at the cusp tips and incisal edges compared with the digital reference file. Smooth facial surfaces did not meet clinical acceptability. Print angulations were shown to affect the cost and amount of resin used.

Implant Site Preparation Application of Injectable Platelet-Rich Fibrin for Vertical and Horizontal Bone Regeneration: A Clinical Report.

Guided bone regeneration (GBR) using a combined injectable platelet-rich fibrin (i-PRF), leukocyte- and platelet-rich fibrin (L-PRF), and biocompatible bone substitute material, is a convenient and effective method to augment a combined vertical and horizontal bone defect. This approach can create sufficient bone quality and quantity for implant surgical sites. A 55-year-old Asian woman presented with a severe bone defect in posterior mandible. The edentulous mandibular alveolar ridge was severely resorbed vertically and horizontally. A GBR procedure using i-PRF and L-PRF combined with particulate bone graft was performed. Postoperative cone beam computed tomography scans, 8 months after the augmentation, revealed a large regeneration of the alveolar bone sufficient for implant placement. A combination i-PRF/L-PRF and particulate bone graft may provide biologically active molecules and a scaffold for osteogenesis. This treatment protocol may be a viable option for a large bone defect required augmentation before implant placement.

Applications of teledentistry in a French inmate population: A one-year observational study.

Teledentistry oral examination protocol was evaluated for one year at the Villeneuve-lès-Maguelone Correctional Facility. The aim of the study was to simplify the obligatory dental consultation protocol at the entrance visit for new detainees. 1051 detainees were enrolled and 651 of them (58.9%) accepted an oral examination by teledentistry throughout the entire year of 2018. Only 1 inmate did not need treatment and 88.06% of those who have been examined had at least one untreated cavitated carious lesion. Forty-four percent of people who received a teledentistry check-up were referred to a dentist with a dental emergency. The use of teledentistry at the entry visit in a detention facility may facilitate the oral health screening without wasting the dentist's time, and may allow an optimization of the inmate's oral healthcare.