ABSTRACT
Alternative fuels can be produced from both non-edible feedstocks and edible crops. The higher production costs and contaminating nature of vegetable biofuels, which cause engine component failure, make it conceivable to encourage the synthesis of biodiesel from non-edible sources. One of the most widely utilized alternative fuels is Jatropha biofuel, which has performance levels comparable to diesel fuels and can be used with CI (Compression Ignition) engines without any modifications. However when it comes to oxidative stability properties that impact shelf life and commercialization, the majority of biodiesels-including Jatropha-are lacking. Therefore, the objective of this study was to enhance the oxidative stability and other physicochemical parameters, such performance and emission characteristics, of Jatropha biodiesel with diesel blends by adding additives like DEE (diethyl ether) and MA (moringa oleifera antioxidant). The seeds of jatropha and moringa were harvested by hand and then mechanically extracted with a screw press. A conical flask containing the precisely weighed amount of oil is filled with 50 mL of neutral alcohol. The combination is then heated for an hour using a water condenser over a bath. Using phenolphthalein indicator, the contents are titrated with KOH solution after cooling. Weight of oil taken (w)/volume of KOH used (mL) × normality of KOH is the formula used to determine the acidity value of jatropha oil. It is therefore below the minimum level set by ASTM D 675, which is 2.5 mg KOH/g. Methanol was used in the transesterification process to produce biodiesel, and potassium hydroxide (KOH) was used as a catalyst. Then, using 5 % DEE and 10 % MA additives, the physicochemical properties of jatropha biodiesel-such as density, kinematics viscosity, calorific value, and oxidative stability-were characterized. The percentage of improvement of the biodiesel's mentioned properties with these additives was 0.68 %, 2.8 %, 0.73 %, and 33.8 %, respectively. The brake thermal efficiency (BTE) of B40MA10DEE05D45 increased by 8.52 % whereas the brake specific fuel consumption (BSFC) of B50MA10DEE05D35, which is Made up of 44 % diesel, 50 % jatropha biodiesel, 5 % DEE, and 10 % MA fuels, declined by 5.14 %. As a result of these additions, the blended fuel's CO, HC, and NOx emissions were reduced by 3.51 %, 2.25 %, and 8.64 %, respectively. Therefore, a 20 % blend of Jatropha biodiesel and diesel containing antioxidants from Moringa can be used in compression ignition engines without the need for engine modifications and with high oxidation stability.