ABSTRACT
CONTEXT: Single-wall carbon nanotubes (SWCNT) dispersed in water with the help of sodium dodecyl sulfate (SDS) surfactants exhibit a temperature dependent near infrared (NIR) exciton spectrum. Due to their biocompatibility and NIR spectrum falling within the transparent window for biological tissue, SWCNTs hold potential for sensing temperature inside cells. Here, we seek to elucidate the mechanism responsible for this temperature dependence, focusing on changes in the water coverage of the SWCNT as the surfactant structure changes with temperature. We compare optical absorption spectra in the UV-Vis-IR range and fully atomistic molecular dynamics (MD) simulations. The observed temperature dependence of the spectra for various SWCNTs may be attributed to changes in the dielectric environment and its impact on excitons. MD simulations reveal that the adsorbed SDS molecules effectively shield the SWCNT, with ~ 70% of water molecules removed from the first two adlayers; this coverage shows a modest temperature dependence. Although we are not able to directly demonstrate how this influences the NIR spectrum, this represents a potential pathway given the strong influence of the water environment on the excitons in SWCNTs. METHODS: Optical absorption measurements were carried out in the UV-Vis-NIR range using a Varian Cary 5000 spectrophotometer in a temperature-controlled environment. PeakFit™ v. 4.06 was used as peak-fitting program in the spectral range 900-1400 nm (890-1380 meV) as a function of the temperature. Fully atomistic molecular dynamics simulations were conducted using the NAMD2 package. The CHARMM force field comprising two-body bond stretching, three-body angle deformation, four-body dihedral angle deformation, and nonbonded interactions (electrostatic and Lennard-Jones 6-16 potentials) was employed.
ABSTRACT
In this article, we present the mobilities of prolate ellipsoidal micrometric particles close to an air-water interface measured by dual wave reflection interference microscopy. Particle's position and orientation with respect to the interface are simultaneously measured as a function of time. From the measured mean square displacement, five particle mobilities (3 translational and 2 rotational) and two translational-rotational cross-correlations are extracted. The fluid dynamics governing equations are solved by the finite element method to numerically evaluate the same mobilities, imposing either slip and no-slip boundary conditions to the flow at the air-water interface. The comparison between experiments and simulations reveals an agreement with no-slip boundary conditions prediction for the translation normal to the interface and the out-of-plane rotation, and with slip ones for parallel translations and in-plane rotation. We rationalize these evidences in the framework of surface incompressibility at the interface.
ABSTRACT
HYPOTHESIS: Although the dynamics of colloids in the vicinity of a solid interface has been widely characterized in the past, experimental studies of Brownian diffusion close to an air-water interface are rare and limited to particle-interface gap distances larger than the particle size. At the still unexplored lower distances, the dynamics is expected to be extremely sensitive to boundary conditions at the air-water interface. There, ad hoc experiments would provide a quantitative validation of predictions. EXPERIMENTS: Using a specially designed dual wave interferometric setup, the 3D dynamics of 9 µm diameter particles at a few hundreds of nanometers from an air-water interface is here measured in thermal equilibrium. FINDINGS: Intriguingly, while the measured dynamics parallel to the interface approaches expected predictions for slip boundary conditions, the Brownian motion normal to the interface is very close to the predictions for no-slip boundary conditions. These puzzling results are rationalized considering current models of incompressible interfacial flow and deepened developing an ad hoc model which considers the contribution of tiny concentrations of surface active particles at the interface. We argue that such condition governs the particle dynamics in a large spectrum of systems ranging from biofilm formation to flotation process.
ABSTRACT
Mucus is a viscoelastic aqueous fluid that participates in the protective barrier of many mammals' epithelia. In the airways, together with cilia beating, mucus rheological properties are crucial for lung mucociliary function, and, when impaired, potentially participate in the onset and progression of chronic obstructive pulmonary disease (COPD). Samples of human mucus collected in vivo are inherently contaminated and are thus poorly characterized. Human bronchial epithelium (HBE) cultures, differentiated from primary cells at an air-liquid interface, are highly reliable models to assess non-contaminated mucus. In this paper, the viscoelastic properties of HBE mucus derived from healthy subjects, patients with COPD and from smokers are measured. Hallmarks of shear-thinning and elasticity are obtained at the macroscale, whereas at the microscale mucus appears as a heterogeneous medium showing an almost Newtonian behaviour in some extended regions and an elastic behaviour close to boundaries. In addition, we developed an original method to probe mucus adhesion at the microscopic scale using optical tweezers. The measured adhesion forces and the comparison with mucus-simulants rheology as well as mucus imaging collectively support a structure composed of a network of elastic adhesive filaments with a large mesh size, embedded in a very soft gel.
ABSTRACT
When a microparticle is trapped at a fluid interface, particle's electrical charge and weight combine to deform the interface. Such deformation is expected to affect the particle diffusion via hydrodynamics boundary conditions. Using available models of particle-induced electrostatic deformation of the interface and particle dynamics at the interface, we are able to analytically predict particle diffusion coefficient values in a large range of particle's contact angle and size. This might offer a solid background of numerical values to compare with for future experimental studies in the field of particle diffusion at a fluid interface.
ABSTRACT
Although the existence of the twist-bend (NTB) and splay-bend (NSB) nematic phases was predicted long ago, only the former has as yet been observed experimentally, whereas the latter remains elusive. This is especially disappointing because the NSB nematic is promising for applications in electro-optic devices. By applying an electric field to a planar cell filled with the compound CB7CB, we have found an NTB-NSB phase transition using birefringence measurements. This field-induced transition to the biaxial NSB occurred, although the field was applied along the symmetry axis of the macroscopically uniaxial NTB Therefore, this transition is a counterintuitive example of breaking of the macroscopic uniaxial symmetry. We show by theoretical modeling that the transition cannot be explained without considering explicitly the biaxiality of both phases at the microscopic scale. This strongly suggests that molecular biaxiality should be a key factor favoring the stability of the NSB phase.
ABSTRACT
We report the measurement of the interaction energy between a charged Brownian polystyrene particle and an air-water interface. The interaction potential is obtained from the Boltzmann equation by tracking particle interface distance with a specifically designed Dual-Wave Reflection Interference Microscopy (DW-RIM) setup. The particle has two equilibrium positions located at few hundreds of nanometers from the interface. The farthest position is well accounted by a DLVO model complemented by gravity. The closest one, not predicted by current models, more frequently appears in water solutions at relatively high ions concentrations, when electrostatic interaction is screened out. It is accompanied by a frozen rotational diffusion dynamics that suggests an interacting potential dependent on particle orientation and stresses the decisive role played by particle surface heterogeneities. Building up on both such experimental results, the important role of air nanobubbles pinned on the particle interface is discussed.
ABSTRACT
HYPOTHESIS: Rotational Brownian diffusions of colloidal particles at a fluid interface play important roles in particle self-assembly and in surface microrheology. Recent experiments on translational Brownian motion of spherical particles at the air-water interface show a significant slowing down of the translational diffusion with respect to the hydrodynamic predictions (Boniello et al., 2015). For the rotational diffusions of partially wetted colloids, slowing down of the particle dynamics can be also expected. EXPERIMENTS: Here, the rotational dynamics of Janus colloids at the air-water interface have been experimentally investigated using optical microscopy. Bright field and fluorescent microscopies have been used to measure the in-plane and out-of-plane particle rotational diffusions exploiting the Janus geometry of the colloids we fabricated. FINDINGS: Our results show a severe slowing down of the rotational diffusion Dr,⥠connected to the contact line motion and wetting-dewetting dynamics occurring on particle regions located at opposite liquid wedges. A slowing down of the particle rotational diffusion about an axis parallel to the interfacial normal Dr,|| was also observed. Contact line fluctuations due to partial wetting dynamics lead to a rotational line friction that we have modelled in order to describe our results.
ABSTRACT
Biological or artificial microswimmers move performing trajectories of different kinds such as rectilinear, circular, or spiral ones. Here, we report on circular trajectories observed for active Janus colloids trapped at the air-water interface. Circular motion is due to asymmetric and nonuniform surface properties of the particles caused by fabrication. Motion persistence is enhanced by the partial wetted state of the Janus particles actively moving in two dimensions at the air-water interface. The slowing down of in-plane and out-of-plane rotational diffusions is described and discussed.
ABSTRACT
Colloidal suspensions of anisotropic nanoparticles can spontaneously self-organize in liquid-crystalline phases beyond some concentration threshold. These phases often respond to electric and magnetic fields. At lower concentrations, usual isotropic liquids are observed but they can display very strong Kerr and Cotton-Mouton effects (i.e., field-induced particle orientation). For many examples of these colloidal suspensions, the solvent is water, which hinders most electro-optic applications. Here, for goethite (α-FeOOH) nanorod dispersions, we show that water can be replaced by polar aprotic solvents, such as N-methyl-2-pyrrolidone (NMP) and dimethylsulfoxide (DMSO), without loss of colloidal stability. By polarized-light microscopy, small-angle X-ray scattering and electro-optic measurements, we found that the nematic phase, with its field-response properties, is retained. Moreover, a strong Kerr effect was also observed with isotropic goethite suspensions in these polar aprotic solvents. Furthermore, we found no significant difference in the behavior of both the nematic and isotropic phases between the aqueous and non-aqueous dispersions. Our work shows that goethite nanorod suspensions in polar aprotic solvents, suitable for electro-optic applications, can easily be produced and that they keep all their outstanding properties. It also suggests that this solvent replacement method could be extended to the aqueous colloidal suspensions of other kinds of charged anisotropic nanoparticles.
ABSTRACT
We experimentally and theoretically study the variety of elastic deformations that appear when colloidal inclusions are embedded in thin wetting films of a nematic liquid crystal with hybrid anchoring conditions. In the thickest films, the elastic dipoles formed by particles and their accompanying defects share features with the patterns commonly observed in liquid crystal cells. When the film gets thinner than the particles size, however, the capillary effects strongly modify the appearance of the elastic dipoles and the birefringence patterns. The influence of the film thickness and particles sizes on the patterns has been explored. The main experimental features and the transitions observed at large scale-with respect to the inclusions' size-are explained with a simple two-dimensional Ansatz, combining capillarity and nematic elasticity. In a second step, we discuss the origin of the variety of observed textures. Developing a three-dimensional Landau-de Gennes model at the scale of the particles, we show that the presence of free interfaces and the beads confinement yield metastable configurations that are quenched during the film spreading or the beads trapping at interfaces.
ABSTRACT
We study the dynamics of individual polystyrene ellipsoids of different aspect ratios trapped at the air-water interface. Using particle tracking and in situ vertical scanning interferometry techniques we are able to measure translational drags and the protrusion in air of the ellipsoids. We report that translational drags on the ellipsoid are unexpectedly enhanced: despite the fact that a noticeable part of the ellipsoid is in air, drags are found larger than the bulk one in water.
ABSTRACT
Janus colloidal particles show remarkable properties in terms of surface activity, self-assembly and wetting. Moreover they can perform autonomous motion if they can chemically react with the liquid in which they are immersed. In order to understand the self-propelled motion of catalytic Janus colloids at the air-water interface, wetting and the orientation of the catalytic surface are important properties to be investigated. Wetting plays a central role in active motion since it determines the contact between the fuel and the catalytic surface as well as the efficiency of the transduction of the chemical reaction into motion. Active motion is not expected to occur either when the catalytic face is completely out of the aqueous phase or when the Janus boundaries are parallel to the interfacial plane. The design of a Janus colloid possessing two hydrophilic faces is required to allow the catalytic face to react with the fuel (e.g. H2O2 for platinum) in water and to permit some rotational freedom of the Janus colloid in order to generate propulsion parallel to the interfacial plane. Here, we discuss some theoretical aspects that should be accounted for when studying Janus colloids at the surface of water. The free energy of ideal Janus colloidal particles at the interface is modeled as a function of the immersion depth and the particle orientation. Analytical expressions of the energy profiles are established. Energetic aspects are then discussed in relation to the particle's ability to rotate at the interface. By introducing contact angle hysteresis we describe how the effects of contact line pinning modifies the scenario described in the ideal case. Experimental observations of the contact angle hysteresis of Janus colloids at the interface reveal the effect of pinning; and orientations of silica particles half covered with a platinum layer at the interface do not comply with the ideal scenarios. Experimental observations suggest that Janus colloids at the fluid interface behave as a kinetically driven system, where the contact line motion over the defects decorating the Janus faces rules the orientation and rotational diffusion of the particle.
ABSTRACT
Binary c-T phase diagrams of organogelators in solvent are frequently simplified to two domains, gel and sol, even when the melting temperatures display two distinct regimes, an increase with T and a plateau. Herein, the c-T phase diagram of an organogelator in solvent is elucidated by rheology, DSC, optical microscopy, and transmitted light intensity measurements. We evidence a miscibility gap between the organogelator and the solvent above a threshold concentration, cL. In this domain the melting or the formation of the gel becomes a monotectic transformation, which explains why the corresponding temperatures are nonvariant above cL. As shown by further studies by variable temperature FTIR and NMR, different types of H-bonds drive both the liquid-liquid phase separation and the gelation.
ABSTRACT
In this work, we develop the concept of evaporation-induced self-structuring as a novel approach for producing organised films by exploiting cooperative physical and chemical interactions under far-from-equilibrium conditions (spin-coating), using sol-gel precursors with multiple functional groups. Thin films of self-structured silsesquioxane nanohybrids have been deposited by spin coating through the sol-gel hydrolysis and condensation of a bridged organosilane bearing self-assembling urea groups. The resulting nanostructure, investigated by FTIR, AFM and SEM, is shown to be highly dependent on the catalyst used (nucleophilic or acidic), and can be further modulated by varying the spinning rate. FTIR studies revealed the presence of highly organised structures under acidic catalysis due to strong hydrogen bonding between urea groups and hydrophobic interactions between long alkylene chains. The preferential orientation of the urea cross-links parallel to the substrate is shown using polarized FTIR experiments.
ABSTRACT
Macroscopic quantum phase coherence has one of its pivotal expressions in the Josephson effect, which manifests itself both in charge and energy transport. The ability to master the amount of heat transferred through two tunnel-coupled superconductors by tuning their phase difference is the core of coherent caloritronics, and is expected to be a key tool in a number of nanoscience fields, including solid-state cooling, thermal isolation, radiation detection, quantum information and thermal logic. Here, we show the realization of the first balanced Josephson heat modulator designed to offer full control at the nanoscale over the phase-coherent component of thermal currents. Our device provides magnetic-flux-dependent temperature modulations up to 40 mK in amplitude with a maximum of the flux-to-temperature transfer coefficient reaching 200 mK per flux quantum at a bath temperature of 25 mK. Foremost, it demonstrates the exact correspondence in the phase engineering of charge and heat currents, breaking ground for advanced caloritronic nanodevices such as thermal splitters, heat pumps and time-dependent electronic engines.
ABSTRACT
Directed and true self-assembly mechanisms in nematic liquid crystal colloids rely on specific interactions between microparticles and the topological defects of the matrix. Most ordered structures formed in thin nematic cells are thus based on elastic multipoles consisting of a particle and nearby defects. Here, we report, for the first time to our knowledge, the existence of giant elastic dipoles arising from particles dispersed in free nematic liquid crystal films. We discuss the role of capillarity and film thickness on the dimensions of the dipoles and explain their main features with a simple 2D model. Coupling of capillarity with nematic elasticity could offer ways to tune finely the spatial organization of complex colloidal systems.
ABSTRACT
We have investigated the active motion of self-propelled colloids confined at the air-water interface and explored the possibility of enhancing the directional motion of self-propelled Janus colloids by slowing down their rotational diffusion. The two dimensional motion of micron-sized silica-platinum Janus colloids has been experimentally measured by particle tracking video-microscopy at increasing concentrations of the catalytic fuel, i.e. H2O2. Compared to the motion in the bulk, a dramatic enhancement of both the persistence length of trajectories and the speed has been observed. The interplay of colloid self-propulsion, due to an asymmetric catalytic reaction occurring on the colloid, surface properties and interfacial frictions controls the enhancement of the directional movement. The slowing down of the rotational diffusion at the interface, also measured experimentally, plays a pivotal role in the control and enhancement of active motion.
ABSTRACT
The dynamics of colloidal particles at interfaces between two fluids plays a central role in microrheology, encapsulation, emulsification, biofilm formation, water remediation and the interface-driven assembly of materials. Common intuition corroborated by hydrodynamic theories suggests that such dynamics is governed by a viscous force lower than that observed in the more viscous fluid. Here, we show experimentally that a particle straddling an air/water interface feels a large viscous drag that is unexpectedly larger than that measured in the bulk. We suggest that such a result arises from thermally activated fluctuations of the interface at the solid/air/liquid triple line and their coupling to the particle drag through the fluctuation-dissipation theorem. Our findings should inform approaches for improved control of the kinetically driven assembly of anisotropic particles with a large triple-line-length/particle-size ratio, and help to understand the formation and structure of such arrested materials.