Carbohydrate-based block copolymer systems: directed self-assembly for nanolithography applications.

Self-assembly of block copolymers (BCPs) provides an attractive nanolithography approach, which looks especially promising for fabrication of regular structures with characteristic sizes below 10 nm. Nevertheless, directed self-assembly (DSA) and pattern transfer for BCPs with such small features remain to be a challenge. Here we demonstrate DSA of the maltoheptaose-block-polystyrene (MH1,2k-b-PS4,5k) BCP system using graphoepitaxy. BCP thin films were self-organized by solvent vapor annealing in tetrahydrofuran (THF) and water into sub-10 nm scale cylinders of the maltoheptaose (MH) block oriented horizontally or perpendicularly to the surface in a polystyrene (PS) matrix. The guiding patterns for graphoepitaxy were made by the electron beam lithography (EBL) and lift-off process with the distance gradually varying between 0 and 200 nm. Atomic force microscopy (AFM) investigation of MH1,2k-b-PS4,5k BCP DSA patterns revealed good ordering of vertical and horizontal cylindrical MH arrays for DSA lines with 150-200 nm separation. Reactive ion etching (RIE) of MH1,2k and PS4,5k thin films in O2 and CF4 plasma showed up to 14 times higher etch rate of MH compared to PS. These results indicate that MH1,2k-b-PS4,5k is a promising BCP for nanolithographic applications below 10 nm.

Self-assembly of maltoheptaose-b-PMMA block copolymer systems: 10nm Resolution in thin film and bulk states.

This paper describes the self-assembly of oligosaccharide-based hybrid block copolymers (BCPs) consisting of maltoheptaose (MH) and poly(methyl methacrylate) (PMMA) into 10nm scale lamellar and cylindrical phases depending on the volume fractions of MH (ϕMH) and the annealing process. Time resolved SAXS study of the BCP bulk samples during thermal annealing indicated that the BCPs phase separate into 10nm scale periodical structures. The solvent vapor annealing induced self-organizations of the BCP into different phases depending on ϕMH and the weight fraction of THF/H2O. BCPs with relatively higher ØMH, MH-b-PMMA3k (ϕMH=0.27) and MH-b-PMMA5k (ϕMH=0.16) self-organized into lamellar phases while the BCP sample with relatively lower ϕMH, MH-b-PMMA9k (ϕMH=0.10), self-organized into cylindrical phase by using THF/H2O=1/4 (w/w). On the other hand, the solvent vapor annealing with larger fraction of THF, i.e. THF/H2O=2/3 (w/w), induced cylindrical phases for MH-b-PMMA3k and MH-b-PMMA5k.

Oligosaccharide-based block copolymers: metal-free thiol-maleimide click conjugation and self-assembly into nanoparticles.

Amphiphilic oligosaccharide-based block copolymers (OBCPs) are able to self-assemble either into nanoparticles with biocompatible oligosaccharides corona in aqueous solution or in sub-nanopatterned thin-films originating from the high incompatibility between the different blocks. For these reasons, these biosourced OBCPs are valuable structures for applications in nanomedicine and nanoelectronics. Up to now, the synthesis of those OBCPs was obtained through grafting-onto method using Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC). However, complete removal of metal catalyst residues from the resultant copolymer chains is critical and hampers electronic and biomedical applications. In this study, we report an efficient and convenient metal-free click chemistry approach consisting in coupling thiol-containing oligosaccharide blocks to maleimide-terminated polystyrenes. Upon self-assembly in water, spherical micelles of similar size than those obtained by Cu(I)-catalyzed azide-alkyne cycloaddition were formed as evidenced using dynamic light scattering and transmission electron microscopy techniques.

Influence of the macromolecular architecture on the self-assembly of amphiphilic copolymers based on poly(N,N-dimethylamino-2-ethyl methacrylate) and poly(epsilon-caprolactone).

The self-assembly of amphiphilic copolymers consisting of poly( N, N-dimethylamino-2-ethyl methacrylate) (PDMAEMA) and poly(-caprolactone) (PCL) segments arranged in graft and linear diblock architectures was investigated in this work by means of dynamic light scattering (DLS) in aqueous solution and by atomic force microscopy (AFM) on thin deposits. The solid-state deposits of the micelles were generated by a "freeze-drying" technique that preserves the initial micelle morphology in solution. A comparison between the morphological properties of graft copolymers with corresponding diblock copolymers was established to demonstrate the effect of the copolymer architecture on the micelle structure and organization.

Time division multiplexing based method for compressing ECG signals: application for normal and abnormal cases.

The proposed ECG compression method combines three major approaches based on time division multiplexing (TDM) and multilevel wavelet decomposition followed by parametrical modelling. Before applying these techniques, a pre-processing step is required, which consists of detecting and aligning different beats. Even though this compression method is regarded as a lossy method, we will show how a high compression ratio (CR) can be achieved by preserving the major medical information within the ECG. Several normal and abnormal signals from various databases are used to evaluate the performance of the proposed technique.

[ECG compression method by using multiple polynomial modelling: comparison with wavelet-changing technique].

The proposed ECG compression combined two approaches, ECG beat alignment and polynomial modeling. QRS complexes are firstly detected then aligned in order to reduce high frequency changes from beat to beat. These changes are modeled by means a polynomial projection. ECG from MIT-BIH database are used to evaluate the performances of the proposed technique. A comparison with the wavelet approach is performed by means the compression ratio (CR) versus the RRD curve.

Ultrastructural aspects of phytoglycogen from cryo-transmission electron microscopy and quasi-elastic light scattering data.

Phytoglycogen particles extracted from the sugary maize mutant su 1 and dispersed in water were studied using transmission electron microscopy (TEM) and light scattering. Dried specimens were either negatively stained with uranyl acetate or shadowed with W/Ta. Frozen-hydrated unstained particles embedded in a thin film of vitreous ice were also observed using cryo-TEM. The particles exhibited a spheroidal shape, with a diameter ranging from 30 to 100 nm. Some of them presented a multilobular morphology and appeared to be formed by smaller subunits, 20-30 nm in diameter, resembling the described beta-particles for animal glycogen. The diameter of stained and ice-embedded particles was measured from electron micrographs. The corresponding size distribution histograms showed that the average weight diameter of ice-embedded particles was higher than that of stained ones. In the latter case, a shrinkage of the particle was believed to occur during the drying process. Light scattering experiments confirmed the diameter of ice-embedded particles and indicated that they could be considered as uniformly dense spheroidal objects.

Dynamic light scattering study of the two-domain structure of Humicola insolens endoglucanase V.

Endoglucanase V (EG V) of HUmicola insolens is composed of a catalytic domain and of a cellulose-binding domain linked by a 33 amino acid long peptide rich in Ser, Thr and Pro residues. This work describes the dynamic behavior of the two-domain structure of EG V as revealed by quasi-elastic light scattering experiments. For both the full-length and the isolated catalytic domain, the autocorrelation function is essentially described by a single relaxation mode. The equivalent hydrodynamic radius of the catalytic domain was found to correspond precisely to the dimensions measured from the previously determined three-dimensional structure. The results obtained with the full-length protein allow a description of the two domain structure of EG V similar to that resulting from earlier studies using small angle X-ray scattering on cellulases from Trichoderma reesei. The hydrodynamic dimensions of the entire enzyme can be approximated as an ellipsoid with dimensions of 42 x 133.6 A.