Non-reductive iron release from horse spleen ferritin using desferoxamine chelation.

The rate of Fe(3+) release from horse spleen ferritin (HoSF) was measured using the Fe(3+)-specific chelator desferoxamine (DES). The reaction consists of two kinetic phases. The first is a rapid non-linear reaction followed by a slower linear reaction. The overall two-phase reaction was resolved into three kinetic events: 1) a rapid first-order reaction in HoSF (k(1)); 2) a second slower first-order reaction in HoSF (k(2)); and 3) a zero-order slow reaction in HoSF (k(3)). The zero-order reaction was independent of DES concentration. The two first-order reactions had a near zero-order dependence on DES concentration and were independent of pH from 6.8 to 8.2. The two first-order reactions accounted for 6-9 rapidly reacting Fe(3+) ions. Activation energies of 10.5±0.8, 13.5±2.0 and 62.4±2.1kJ/mol were calculated for the kinetic events associated with k(1), k(2), and k(3), respectively. Iron release occurs by: 1) a slow zero-order rate-limiting reaction governed by k(3) and corresponding to the dissociation of Fe(3+) ions from the FeOOH core that bind to an Fe(3+) binding site designated as site 1 (proposed to be within the 3-fold channel); 2) transfer of Fe(3+) from site 1 to site 2 (a second binding site in the 3-fold channel) (k(2)); and 3) rapid iron loss from site 2 to DES (k(1)).

Kinetic studies of iron deposition catalyzed by recombinant human liver heavy and light ferritins and Azotobacter vinelandii bacterioferritin using O2 and H2O2 as oxidants.

The discrepancy between predicted and measured H(2)O(2) formation during iron deposition with recombinant heavy human liver ferritin (rHF) was attributed to reaction with the iron protein complex [Biochemistry 40 (2001) 10832-10838]. This proposal was examined by stopped-flow kinetic studies and analysis for H(2)O(2) production using (1) rHF, and Azotobacter vinelandii bacterial ferritin (AvBF), each containing 24 identical subunits with ferroxidase centers; (2) site-altered rHF mutants with functional and dysfunctional ferroxidase centers; and (3) recombinant human liver light ferritin (rLF), containing no ferroxidase center. For rHF, nearly identical pseudo-first-order rate constants of 0.18 s(-1) at pH 7.5 were measured for Fe(2+) oxidation by both O(2) and H(2)O(2), but for rLF, the rate with O(2) was 200-fold slower than that for H(2)O(2) (k = 0.22 s(-1)). A Fe(2+)/O(2) stoichiometry near 2.4 was measured for rHF and its site altered forms, suggesting formation of H(2)O(2). Direct measurements revealed no H(2)O(2) free in solution 0.5-10 min after all Fe(2+) was oxidized at pH 6.5 or 7.5. These results are consistent with initial H(2)O(2) formation, which rapidly reacts in a secondary reaction with unidentified solution components. Using measured rate constants for rHF, simulations showed that steady-state H(2)O(2) concentrations peaked at 14 muM at approximately 600 ms and decreased to zero at 10-30 s. rLF did not produce measurable H(2)O(2) but apparently conducted the secondary reaction with H(2)O(2). Fe(2+)/O(2) values of 4.0 were measured for AvBF. Stopped-flow measurements with AvBF showed that both H(2)O(2) and O(2) react at the same rate (k = 0.34 s(-1)), that is faster than the reactions with rHF. Simulations suggest that AvBF reduces O(2) directly to H(2)O without intermediate H(2)O(2) formation.

Kinetic studies of iron deposition in horse spleen ferritin using O2 as oxidant.

An optical flow cell provided a means to conveniently measure the rate of successive Fe(2+) oxidation reactions catalyzed by horse spleen ferritin (HoSF) to determine if both ferroxidase and mineral core Fe(2+) oxidation reactions occur. The oxygen concentration and pH were held constant and multiple additions of Fe(2+)/HoSF ratios of 1, 10, 100, 150, 250 and 400 were conducted, creating core sizes ranging from 12 to 2800. During these oxidations, the absence of nonspecific Fe(OH)(3) formation and the presence (>95%) of Fe(OH)(3) deposited within the core of HoSF demonstrated the validity of monitoring iron deposition into HoSF by this procedure. Initial rates for oxidation of 5-50 Fe(2+)/HoSF established that the reaction is overall first order in Fe(2+) concentration. However, when full progress curves were analyzed at a variety of Fe(2+)/HoSF ratios, two first-order reactions (k(1) approximately 0.035 s(-1) and k(2) approximately 0.007 s(-1)) were found to contribute to the overall Fe(2+) oxidation reaction. The proportion of the fast reaction increased with increasing Fe(2+)/HoSF ratio until at approximately 400, it was the dominant reaction. For the Fe(2+)/HoSF ratios examined, the overall rate of iron deposition is independent of the size of the mineral core, a result suggesting that an increasing mineral core size does not enhance the rate of Fe(2+) oxidation. Comparison of successive additions of 1.0 Fe(2+)/HoSF showed that oxidation of the first 8-10 Fe(2+) produced a Fe(III) species with a lower molar absorptivity per Fe(III) than that of the bulk core. Measurement of the H(+)/Fe(2+) ratio confirmed this difference in behavior by giving an H(+)/Fe(2+) ratio of approximately 1.0 below and 2.0 for ratios >30 Fe(2+)/HoSF. The faster reaction was attributed to ferroxidase catalysis and the slow reaction to nonspecific ferroxidase activity of the HoSF protein shell.