Modelling retention and peak shape of small polar solutes analysed by nano-HPLC using methacrylate-based monolithic columns.

The development of methacrylate-based monolithic columns was studied for the separation of pharmaceutical hydrophilic compounds in nano-liquid chromatography. The selected polymerisation mixture consisted of 7.5% hexyl methacrylate, 4.5% methacrylic acid and 18.0% ethylene dimethacrylate (w/w), in a binary porogenic solvent (35:35 w/w 1-propanol/1,4-butanediol). The polymer synthesised with this mixture has a good permeability, not excessive back-pressure, and reasonable retention times for polar and non-polar solutes. Monolithic columns (12 cm total capillary length, 100 µm i.d.), prepared with this mixture, were able to produce hydrogen bonding and electrostatic interactions, giving rise to promising separations. To evaluate the chromatographic system, alkylbenzenes (neutral and hydrophobic compounds) and sulphonamides (hydrophilic drugs) were assayed. To optimise the chromatographic mobile phase in isocratic elution and characterise the retention mechanism for a mixture of eight sulphonamides, the performance of several mathematic models was checked in the description of retention. The behaviour of the monolithic capillary column was compared, in terms of selectivity and peak shape, to that obtained with a C18 column (9 cm × 4.6 mm i.d., 5 µm particle size) using a conventional HPLC equipment. The results revealed substantial differences in the interactions established for sulphonamides between the monolithic and C18 columns.

Preparation of organic monolithic columns in polytetrafluoroethylene tubes for reversed-phase liquid chromatography.

In this work, a method for the preparation and anchoring of polymeric monoliths in a polytetrafluoroethylene (PTFE) tubing as a column housing for microbore HPLC is described. In order to assure a covalent attachment of the monolith to the inner wall of the PTFE tube, a two-step procedure was developed. Two surface etching reagents, a commercial sodium naphthalene solution (Fluoroetch®), or mixtures of H2O2 and H2SO4, were tried and compared. Then, the obtained hydroxyl groups on the PTFE surface were modified by methacryloylation. Attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy and scanning electron microscopy (SEM) confirmed the successful modification of the tubing wall and the stable anchorage of monolith to the wall, respectively. Special emphasis was also put on the reduction of the unwanted effects of shrinking of monolith during polymerization, by using an external proper mold and by selecting the adequate monomers in order to increase the flexibility of the polymer. Poly(glycidyl methacrylate-co-divinylbenzene) monoliths were in situ synthesized by thermal polymerization within the confines of surface-vinylized PTFE tubes. The modified PTFE tubing tightly held the monolith, and the monolithic column exhibited good pressure resistance up to 20 MPa. The column performance was also evaluated via the isocratic separation of a series of alkylbenzenes in the reversed-phase mode. The optimized monolithic columns gave plate heights ranged between 70 and 80 µm. The resulting monoliths were also satisfactorily applied to the separation of proteins.