ABSTRACT
Due to potentially harmful exposure to X-rays, condylar growth in response to orthodontic treatment is poorly studied. To overcome this limitation, here, the authors have proposed high-resolution MRI as a viable alternative to CBCT for clinical 3D assessment of TMJ. A male subject underwent both MRI and CBCT scans. The obtained three-dimensional reconstructions of the TMJ were segmented and superimposed by a semiautomatic algorithm developed in MATLAB R2022a. The condylar geometries were reconstructed using dedicated software for image segmentation. Two geometrical parameters, i.e., the total volume and surface of the single condyle model, were selected to quantify the intraclass and interclass variability from the mean of each DICOM series (CBCT and MRI). The final comparison between the reference standard model of CBCT and 3T MRI showed that the former was more robust in terms of reproducibility, while the latter reached a higher standard deviation compared to CBCT, but these values were similar between the operators and clinically not significant. Within the inherent limitation of image reconstruction on MRI scans due to the current lower resolution of this technique, the method proposed here could be considered as a nucleus for developing future completely automatic AI algorithms, owing to its great potential and satisfactory consistency among different times and operators.
ABSTRACT
A systematic review with meta-analysis was conducted to assess the prevalence of automatically listing (a) senior member(s) of a department as co-author(s) on all submitted articles in health sciences and the prevalence of degrees of support on a 5-point justification scale. Survey research was searched in PubMed, Lens.org, and Dimensions.ai. until January 5 2023. We assessed the methodological quality of studies and conducted quantitative syntheses. We identified 15 eligible surveys, that provided 67 results, all of which were rated as having low quality. A pooled estimate of 20% [95% CI 16-25] (10 surveys, 3619 respondents) of researchers in various health sciences reported that a senior member of their department was automatically listed as an author on all submitted articles. Furthermore, 28% [95% CI 22-34] of researchers (10 surveys, 2180 respondents) felt that this practice was 'never', 24% [95% CI 22-27] 'rarely', 25% [95% CI 23-28] 'sometimes', 13% [95% CI 9-17] 'most of the time', and 8% [95% CI 6-9] 'always justified'. The practice of automatically assigning senior members of departments as co-authors on all submitted manuscripts may be common in the health sciences; with those admitting to this practice finding it unjustified in most cases.Registration of the protocol The protocol was registered in Open Science Framework. Link: https://osf.io/4eywp/ .
Subject(s)
Authorship , Humans , Surveys and Questionnaires , Research PersonnelABSTRACT
A systematic review and meta-analysis of survey research was conducted to estimate honorary authorship prevalence in health sciences. We searched PubMed, Lens.org, and Dimensions.ai. until January 5 2023. Methodological quality was assessed and quantitative syntheses were conducted. Nineteen surveys were included and rated as having low methodological quality. We found a pooled prevalence of 26% [95% CI 21-31] (6 surveys, 2758 respondents) of researchers that perceived co-author(s) as honorary on the publication at issue (when they were not referred to any authorship criteria). That prevalence was 18% [95% CI 15-21] (11 surveys, 4272 respondents) when researchers were referred to Committee of Medical Journal Editors (ICMJE) authorship criteria, and 51% [95% CI 47-56] (15 surveys, 5111 respondents) when researchers were asked to declare their co-author(s) contributions on the publication at issue (and these were then compared to ICMJE criteria). 10% of researchers [95% CI 9-12] (11 surveys, 3,663 respondents) reported being approached by others to include honorary author(s) on the publication at issue and 16% [95% CI 13-18] (2 surveys, 823 respondents) admitted adding (an) honorary author(s). Survey research consistently indicates that honorary authorship in the health sciences is highly prevalent, however the quality of the surveys' methods and reporting needs improvement.
Subject(s)
Authorship , Humans , Surveys and Questionnaires , Research Personnel , Publishing/statistics & numerical dataABSTRACT
BACKGROUND: One of the major clinical challenges of this age could be represented by the possibility to obtain a complete regeneration of infrabony defects. Over the past few years, numerous materials and different approaches have been developed to obtain bone and periodontal healing. Among all biomaterials, bioglasses (BG) are one of the most interesting due to their ability to form a highly reactive carbonate hydroxyapatite layer. Our aim was to systematically review the literature on the use and capability of BG for the treatment of periodontal defects and to perform a meta-analysis of their efficacy. METHODS: A search of MEDLINE/PubMed, Cochrane Library, Embase and DOSS was conducted in March 2021 to identify randomized controlled trials (RCTs) using BG in the treatment of intrabony and furcation defects. Two reviewers selected the articles included in the study considering the inclusion criteria. The outcomes of interest were periodontal and bone regeneration in terms of decrease of probing depth (PD) and gain of clinical attachment level (CAL). A network meta-analysis (NMA) was fitted, according to the graph theory methodology, using a random effect model. RESULTS: Through the digital search, 46 citations were identified. After duplicate removal and screening process, 20 articles were included. All RCTs were retrieved and rated following the Risk of bias 2 scale, revealing several potential sources of bias. The meta-analysis focused on the evaluation at 6 months, with 12 eligible articles for PD and 10 for CAL. As regards the PD at 6 months, AUTOGENOUS CORTICAL BONE, BIOGLASS and PLATELET RICH FIBRIN were more efficacious than open flap debridement alone, with a statistically significant standardized mean difference (SMD) equal to -1.57, -1.06 and - 2.89, respectively. As to CAL at 6 months, the effect of BIOGLASS is reduced and no longer significant (SMD = -0.19, p-value = 0.4) and curiously PLATELET RICH FIBRIN was more efficacious than OFD (SMD =-4.13, p-value < 0.001) in CAL gain, but in indirect evidence. CONCLUSIONS: The present review partially supports the clinical efficacy of BG in periodontal regeneration treatments for periodontal purposes. Indeed, the SMD of 0.5 to 1 in PD and CAL obtained with BG compared to OFD alone seem clinically insignificant even if it is statistically significant. Heterogeneity sources related to periodontal surgery are multiple, difficult to assess and likely hamper a quantitative assessment of BG efficacy.
Subject(s)
Biocompatible Materials , Furcation Defects , Humans , Biocompatible Materials/therapeutic use , Bone Regeneration , Dental Care , DurapatiteABSTRACT
The objective was to evaluate the relationship between the dimensions of the maxillary sinuses (MSs) and various cephalometric parameters. MS volume (MSV), MS surface (MSS), linear maximum depth (LMD), linear maximum width (LMW), and linear maximum height (LMH) were calculated on CBCT scans of 99 adults. Two sets of two-way (ANOVA) assessed the influence respectively of ANB and SNA angles and of the gender on MS dimensions. Pearson's correlation was calculated between MS dimensions and different cephalometric variables. Reliability and accuracy of the proposed method was tested with intra-operator and inter-operator intraclass correlation coefficient (ICC). Two-way ANOVA showed no statistically significant difference in MSV, MSS and LMH between ANB groups, whilst males were associated with bigger sinuses. LMW showed statistically significant difference in both ANB and gender groups. LMD showed no statistically significant difference. The second Two-way ANOVA showed significantly larger MSV, MSS and LMD in patients with increased or reduced SNA angle but not between genders. LMW and LMH also showed a significant difference between genders. All linear measurements showed a significant interaction of the two factors. The intra-observer and inter-observer ICC scored high for all the tested measurements. MSV and MSS showed a positive correlation with S-N, PNS-A, S-Go, N-Me, N-Ans and the distance between Mx points. LMW had a negative correlation with Ba-S-N angle and N-Me, LMH with Ba-S-N angle, S-Go and Mx r-Mx l and LMD with N-Me and N-ANS. LMW had a positive correlation with Mx r-Mx l, LMH with S-N, S-N^Ans-Pns, N-Me, N-Ans and LMD with S-N, Ba-S-N, PNS-A, S-Go and distance between Mx points. In conclusion, MSV and MSS did not differ between the three skeletal classes, males showed significantly larger MS than in females. Concerning the influence of the cranio-maxillary relationship (SNA) and gender on MS dimension, subjects with a retrusion (SNA < 80°) or protusion (SNA > 84°) of the maxillary alveolar bone had larger MSV, MSS, LMW, LMH and LMD than subjects with a normal cranio-maxillary relationship (SNA 82 ± 2°). A statistically significant high positive correlation was observed between S-N, Pns-A, S-Go, Mx-R/Mx-r and MS dimension. Further studies that evaluate similar outcomes in different races may be able to enrich our knowledge on this topic.
Subject(s)
Maxilla , Maxillary Sinus , Adult , Humans , Male , Female , Reproducibility of Results , Maxillary Sinus/diagnostic imaging , Maxilla/diagnostic imaging , Cone-Beam Computed Tomography , Cephalometry/methodsABSTRACT
Trial design A single-centre two-arm parallel group randomised controlled trial.Objectives To assess differences in dental stability, patient perceptions and compliance and retainer failures in adolescents treated with vacuum-formed retainers (VFR) compared with those receiving bonded canine-to canine retainers after five years in retention.Methods In total, 104 eligible adolescents treated with fixed appliances in both jaws in a Swedish orthodontic clinic were randomised to two retention protocols. The intervention protocol consisted of a VFR covering all erupted teeth in the maxilla and a VFR in the mandible covering first premolar to first premolar. The controls received a VFR in the maxilla covering all erupted teeth and a bonded retainer wire to the lingual surfaces of the canines. The primary outcomes were various dental stability measures assessed at: debond (T1); six months (T2); 18 months (T3); and after five years (T4) in retention. Generalised estimating equations were used to quantify the effect of the different interventions on these outcome measures. One operator assessed all outcomes and participants could not be blinded. For the secondary outcomes, the perception and compliance with the retention protocols were assessed and the prevalence and rationale of retainer failure at T4. The trial was registered at ClinicalTrials.gov (NCT03070444) and the research project was supported by the Centre for Research and Development, Region Gävleborg, Sweden.Results Of the 104 randomised patients, 30 were not available at T4, leaving 35 patients in the intervention and 39 in the comparator group. An intention-to-treat analysis was used to impute outcomes for the missing patients. Post-treatment changes at T4 were small in both jaws. In the maxilla, the Little's Irregularity Index (LII) increased similar in both retention groups (median difference: 0.3 mm). In the mandible, the median difference for the LLI in the bonded retainer group was 0.1 mm compared with 0.6 mm in VFR group. In both retention protocols, the overjet remained stable, the overbite increased and the arch lengths continued to decrease. Intercanine and intermolar width remained stable in the mandible. Intermolar width decreased significantly in the maxilla. No differences in satisfaction were found between retention protocols after five years. Also, 72% of patients had stopped or rarely wore the VFR appliances at T4. Besides some retainer failures in both groups, no serious adverse effects associated with the retainers were reported.Conclusions Most post-treatment changes in both retention protocols were small in both jaws, except for the anterior alignment in the mandible, which was more stable in the bonded retainer group. This difference is possibly not related to the retention technique but to the poor compliance with the VFRs and the inclusion of adolescents only. Satisfaction with both protocols was similar.
Subject(s)
Orthodontic Retainers , Overbite , Humans , Maxilla , Orthodontic Appliance Design , Orthodontics, Corrective/methods , Randomized Controlled Trials as Topic , AdolescentABSTRACT
Dental implants have dramatically changed the rehabilitation procedures in dental prostheses but are hindered by the possible onset of peri-implantitis. This paper aims to assess whether an anodization process applied to clinically used surfaces could enhance the adhesion of fibroblasts and reduce bacterial adhesion using as a reference the untreated machined surface. To this purpose, four different surfaces were prepared: (i) machined (MAC), (ii) machined and anodized (Y-MAC), (iii) anodized after sand-blasting and acid etching treatment (Y-SL), and (iv) anodized after double acid etching (Y-DM). All specimens were characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Moreover, the mean contact angle in both water and diiodomethane as well as surface free energy calculation was assessed. To evaluate changes in terms of biological responses, we investigated the adhesion of Streptococcus sanguinis (S. sanguinis) and Enterococcus faecalis (E. faecalis), fetal bovine serum (FBS) adsorption, and the early response of fibroblasts in terms of cell adhesion and viability. We found that the anodization reduced bacterial adhesion, while roughened surfaces outperformed the machined ones for protein adsorption, fibroblast adhesion, and viability independently of the treatment. It can be concluded that surface modification techniques such as anodization are valuable options to enhance the performance of dental implants.
Subject(s)
Dental Implants , Surface Properties , Titanium/chemistry , Bacterial Adhesion , Cell AdhesionABSTRACT
This paper aims to review the evidence of the cellular activity on titanium samples exposed to Plasma of Argon (PoA) treatment. A systematic review was carried out based on the PRISMA statement by searching the Cochrane Library, PubMed, Web of Science, EMBASE and Scopus, up to October 2020. Papers were selected according to PICOS format that is: Population (P): osteoblasts, fibroblasts, gingival cells; Intervention (I): PoA disinfection treatment; Comparison (C): untreated controls; Outcome (O): cell culture; Setting (S): in vitro assays. The quality assessment was performed according to the CRIS Guidelines (Checklist for Reporting In vitro Studies). A total of 661 articles were found, of which 16 were included. The quality assessment revealed an overall poor quality of the studies analyzed. In vitro studies on the potential of PoA showed a potential effect in promoting higher cell adhesion and protein adsorption in the earliest times (hours). This outcome was not so evident when later stages of cell growth on the surfaces were tested and compared to the control groups. Only one study was conducted in vivo on a human sample regarding abutment cleaning. No meta-analysis was conducted because of the variety of experimental settings, mixed methods and different cell lines studied. PoA seems to be effective in promoting cell adhesion and protein adsorption. The duration of this effect remains unclear. Further evidence is required to demonstrate the long-term efficacy of the treatment and to support the use of PoA treatment in clinical practice.
Subject(s)
Osteoblasts , Titanium , Argon/pharmacology , Cell Adhesion , Humans , Surface Properties , Titanium/pharmacologyABSTRACT
BACKGROUND: Cephalometric analysis is traditionally performed on skull lateral teleradiographs for orthodontic diagnosis and treatment planning. However, the skull flattened over a 2D film presents projection distortions and superimpositions to various extents depending on landmarks relative position. When a CBCT scan is indicated for mixed reasons, cephalometric assessments can be performed directly on CBCT scans with a distortion free procedure. The aim of the present study is to compare these two methods for orthodontic cephalometry. METHODS: 114 CBCTs were selected, reconstructed lateral cephalometries were obtained by lateral radiographic projection of the entire volume from the right and left sides. 2D and 3D cephalometric tracings were performed. Since paired t-tests between left and right-side measurements found no statistically significant differences, mean values between sides were considered for both 2D and 3D values. The following measurements were evaluated: PNS-A; S-N; N-Me; N-ANS; ANS-Me; Go-Me; Go-S; Go-Co; SNA, SNB, ANB; BaSN; S-N^PNS-ANS; PNS-ANS^Go-Me; S-N^Go-Me. Intraclass correlation coefficients, paired t-test, correlation coefficient and Bland-Altman analysis were performed to compare these techniques. RESULTS: The values of intra- and inter-rater ICC showed excellent repeatability and reliability: the average (± SD) intraobserver ICCs were 0.98 (± 0.01) and 0.97(± 0.01) for CBCT and RLCs, respectively; Inter-rater reliability resulted in an average ICC (± SD) of 0.98 (± 0.01) for CBCT and 0.94 (± 0.03) for RLC. The paired t-tests between CBCT and reconstructed lateral cephalograms revealed that Go-Me, Go-S, PNS-ANS^Go-Me and S-N^Go-Me measurements were statistically different between the two modalities. All the evaluated sets of measurements showed strong positive correlation; the bias and ranges for the 95% Limits of Agreement showed higher levels of agreement between the two modalities for unpaired measurements with respect to bilateral ones. CONCLUSION: The cephalometric measurements laying on the mid-sagittal plane can be evaluated on CBCT and used for orthodontic diagnosis as they do not show statistically significant differences with those measured on 2D lateral cephalograms. For measurements that are not in the mid-sagittal plane, the future development of specific algorithms for distortion correction could help clinicians deduct all the information needed for orthodontic diagnosis from the CBCT scan.
Subject(s)
Spiral Cone-Beam Computed Tomography , Cephalometry/methods , Cone-Beam Computed Tomography/methods , Cross-Sectional Studies , Humans , Imaging, Three-Dimensional/methods , Reproducibility of ResultsABSTRACT
BACKGROUND: The aim of this work is to evaluate changes following rapid maxillary expansion (RME) on breathing function in two groups of patients: mouth breathers and nasal breathers. MATERIALS AND METHODS: Twenty-five oral breather patients (12 male, 13 female, mean age 15.2 ± 1.3), and 25 nasal breather patients (14 male, 11 female, mean age 15.3 ± 1.6) were treated with RME. Breathing function was evaluated by computerized spirometry. Forced vital capacity (FVC), forced expiratory volume in the first second (FEV1), Tiffenau index (FEV1/ FVC ratio, IT%), forced expiratory flow at 25-75% of vital capacity (FEF 25-75%), and Tidal volume (TV) were assessed. Breathing function analysis was performed before RME and 6 and 12 months after RME during follow-up appointments. The Shapiro-Wilk test was used to assess whether data were normally distributed. As data were not normally distributed, Mann-Whitney U and Friedman tests were used to perform comparisons between treatment groups and within group comparisons, respectively. RESULTS: Oral breathers and nasal breathers showed statistically significant differences in FVC, FEF 25-75%, and TV at T0. They did not present any statistically significant difference in FEV1 and IT% at the same time point.Statistically significant differences were noticed for all indices in the oral breather group after maxillary expansion, while the nasal breather group showed statistically significant differences only in FCV, FEF 25-75%, and TV after treatment.There were no statistically significant differences in all indices 12 months after maxillary expansion between the oral breather and nasal breather groups. CONCLUSIONS: RME appeared to improve breathing function in both groups. Forced vital capacity (FVC), forced expiratory flow at 25-75% of vital capacity (FEF 25-75), and Tidal volume (TV) reached similar values in both groups after treatment with RME.
ABSTRACT
BACKGROUND: There is currently no information on how different mandibular segments are affected by juvenile idiopathic arthritis. The aim of this paper is to assess volumetric differences of different mandibular segments in subjects with unilateral and bilateral JIA and to compare them with non-JIA control volumes. MATERIALS AND METHODS: Forty subjects with unilateral TMJ involvement and 48 with bilateral TMJ involvement were selected for the case group and 45 subjects with no known rheumatic comorbidities for the control group. The mandible of each subject was divided according to a validated method into different paired volumes (hemimandible, condyle, ramus and hemibody). RESULTS: The ANOVA test revealed a statistically significant difference in all the groups for condylar and ramus volumes, and the pairwise comparison evidenced a statistically significant higher condylar and ramus volume in the control group (1444.47 mm3; 5715.44 mm3) than in the affected side in the unilateral JIA group (929.46 mm3; 4776.31 mm3) and the bilateral JIA group (1068.54 mm3; 5715.44 mm3). Moreover, there was also a higher condylar volume in the unaffected side in the unilateral JIA group (1419.39 mm3; 5566.24 mm3) than in the bilateral JIA group and the affected side in the unilateral JIA group. CONCLUSIONS: The affected side of unilateral JIA patients showed statistically significant lower volumes in the hemimandible, in the condyle and in the ramus. The largest total mandibular volume was observed in the control group, followed by the unilateral JIA group and, lastly, by the bilateral JIA group.
Subject(s)
Arthritis, Juvenile , Spiral Cone-Beam Computed Tomography , Arthritis, Juvenile/diagnostic imaging , Cross-Sectional Studies , Humans , Mandible/diagnostic imaging , Mandibular Condyle/diagnostic imagingABSTRACT
Clinical practice and some scientific evidence seem to suggest that there is some kind of relationship between the components that form the postural chain. For professional dancers, good posture and balance are essential. The aim of the present retrospective study is to evaluate whether gnathological treatment could have an impact on the postural balance and sports performance of professional ballet dancers. Electromyographic (EMG) data and balance tests were recorded before and after six months of treatment with a customized occlusal splint. Twenty athletes were examined during ballet exercises in terms of balance and speed of execution by two experienced clinicians. The results showed statistically significant changes for all EMG tests carried out and the Flamingo Balance Test. It appears that the use of a customized occlusal device improved neuro-muscular coordination and the overall performance of dancers.
ABSTRACT
Mesenchymal stem cells (MSCs) can be harvested from different sites in the oral cavity, representing a reservoir of cells useful for regenerative purposes. As direct comparisons between at least two types of MSCs deriving from the same patient are surprisingly rare in scientific literature, we isolated and investigated the osteoinductive potential of dental pulp stem cells (DPSCs) and buccal fat pad stem cells (BFPSCs). MSCs were isolated from the third molar dental pulp and buccal fat pads of 12 patients. The number of viable cells was quantified through manual count. Proliferation and osteodifferentiation assays, flow cytometry analysis of cell phenotypes, and osteocalcin release in vitro were performed. The isolation of BFPSCs and DPSCs was successful in 7 out of 12 (58%) and 3 out of 12 (25%) of retrieved samples, respectively. The yield of cells expressing typical stem cell markers and the level of proliferation were higher in BFPSCs than in DPSCs. Both BFP-SCs and DPSCs differentiated into osteoblast-like cells and were able to release a mineralized matrix. The release of osteocalcin, albeit greater for BFPSCs, did not show any significant difference between BFPSCs and DPSCs. The yield of MSCs depends on their site of origin as well as on the protocol adopted for their isolation. Our data show that BFP is a valuable source for the derivation of MSCs that can be used for regenerative treatments.
ABSTRACT
BACKGROUND: In Juvenile Idiopathic Arthritis (JIA) temporo-mandibular joints are often affected causing skeletal and dental malocclusions. The most frequent condition is mandibular hypoplasia, that may be associated with maxillary hypoplasia. The aim of this retrospective case control study is to investigate the effects and the safety of rapid maxillary expansion (RME) in growing patients affected by JIA. It was evaluated whether RME could be performed without complications on TMJs of JIA patients using DC/TMD protocol, and naso-maxillary transversal parameters were compared with the ones obtained on healthy patients. METHODS: Twenty-five patients affected by JIA that ceased to manifest TMJ (Temporo-Mandibular Joint) symptoms in the previous year were treated with RME to solve the maxillary transverse hypoplasia. Postero-anterior cephalometric tracings were collected before and after treatment; linear measurements were obtained to study maxillary and nasal cavity modifications. Data were compared to those of a similar group of twenty-five healthy patients. Paired t-test and Independent t-test were used to evaluate changes before and after treatment in each group and to perform a comparison between the groups. RESULTS: All patients demonstrated a statistically significant increase in nasal cavity width, maxillary width and upper and lower intermolar width. No patients presented a worsening of their TMJs condition. Intragroup comparisons revealed significant changes of cephalometric measurements, but no difference was found when comparing JIA and healthy patients. CONCLUSIONS: Growing patients with JIA that ceased to show signs of active TMJ involvement for at least one year could be safely treated with RME, expecting similar benefits to those of healthy patients. Dentists and rheumatologists should be informed of safety and potential benefits of palatal expansion in JIA patients in order to improve the outcome of orthodontic treatment and reduce the indication for more invasive procedures (i.e., Surgical Assisted Rapid Maxillary Expansion).
ABSTRACT
Background: Vestibular bone thickness changes and dento-alveolar buccal tipping of second primary molars and of first molars after maxillary expansion performed with a slow maxillary expansion protocol was investigated. Methods: Twenty patients (mean age 7.3 ± 0.9 years old; 9 male and 11 female) were treated according to the Leaf Expander protocol. Buccal alveolar bone thickness (BT), buccal alveolar bone height (BH), inter-dental angle (TIP), and inter-molar width (IW) regarding first molars and second primary molars were calculated before and after expansion on cone beam computed tomography (CBCT) images. Descriptive statistics and paired t-tests were used to assess changes between the pre-treatment and post-treatment measurements. Results: Bone thickness vestibular to second primary molars and intermolar width of both teeth were the only variables that showed statistically significant changes. Conclusions: It appears that buccal bone thickness vestibular to first molars was not significantly reduced after maxillary expansion with the Leaf Expander. The clinical use of a slow maxillary expander with Ni-Ti springs appears efficient and safe in in the correction of maxillary hypoplasia during mixed dentition.
Subject(s)
Maxilla , Molar , Palatal Expansion Technique , Child , Female , Humans , Jaw/anatomy & histology , Male , Maxilla/diagnostic imaging , Molar/diagnostic imaging , Nickel , TitaniumABSTRACT
BACKGROUND: The purpose of this systematic review was to analyze the available literature about the influence of breastfeeding in primary and mixed dentition on different types of malocclusions. METHODS: Preferred Reporting Items for Systematic Reviews and Meta-Analyses Protocols (PRISMA-P) guidelines were used to perform the present review. The following electronic databases were searched: Pubmed, Evidence-Based Medicine Reviews (EBMR), Embase, Cochrane Library, Medline, Web of Science and Ovid. RESULTS: A primary research found a total of 279 articles. Two more papers were also considered from the gray literature. Two hundred sixty-three articles were excluded as they were deemed irrelevant on the basis of: duplicates, title, abstract, methods and/or irrelevant contents. Eighteen papers were selected and included in the qualitative analysis. CONCLUSIONS: breastfeeding is a positive factor that seems to reduce the incidence of posterior crossbite, skeletal class II and distoclusion in primary and mixed dentition. A sort of positive relationship between months of breastfeeding and risk reduction seems to exist. More longitudinal research is needed to avoid bias in the results, with data collected prospectively on the months of exclusive breastfeeding, by means of specific questionnaires and successive clinical evaluation of the occlusal condition at the primary dentition, mixed dentition and permanent dentition stages.
Subject(s)
Breast Feeding , Malocclusion/epidemiology , Malocclusion/prevention & control , Bottle Feeding/adverse effects , Databases, Factual , Dentition , Evaluation Studies as Topic , Humans , Malocclusion/diagnosis , Malocclusion/etiology , Meta-Analysis as Topic , Randomized Controlled Trials as TopicABSTRACT
BACKGROUND: Fully adjustable articulators and pantographs record and reproduce individual mandibular movements. Although these instruments are accurate, they are operator-dependant and time-consuming. Pantographic recording is affected by inter and intra operator variability in the individuation of clinical reference points and afterwards in reading pantographic recording themselves. Finally only border movements can be reproduced. METHODS: Bionic Jaw Motion system is based on two components: a jaw movement analyzer and a robotic device that accurately reproduces recorded movements. The jaw movement analyzer uses an optoelectronic motion system technology made of a high frequency filming camera that acquires 140frames per second and a custom designed software that recognizes and determines the relative distance at each point in time of markers with known geometries connected to each jaw. Circumferential modified retainers connect markers and do not cover any occlusal surfaces neither obstruct occlusion. The recording process takes 5 to 10 s. Mandibular movement performance requires six degrees of freedom of movement, 3 rotations and 3 translations. Other robots are based on the so-called delta mechanics that use several parallel effectors to perform desired movements in order to decompose a complex trajectory into multiple more simple linear movements. However, each parallel effector introduces mechanical inter-component tolerances and mathematical transformations that are required to transform a recorded movement into the combination of movements to be performed by each effector. Bionic Jaw Motion Robot works differently, owing to three motors that perform translational movements and three other motors that perform rotations as a gyroscope. This configuration requires less mechanical components thus reducing mechanical tolerances and production costs. Both the jaw movement analyzer and the robot quantify the movement of the mandible as a rigid body with six degrees of freedom. This represents an additional advantage as no mathematical transformation is needed for the robot to reproduce recorded movements. RESULTS: Based on the described procedure, Bionic Jaw Motion provide accurate recording and reproduction of maxillomandibular relation in static and dynamic conditions. CONCLUSION: This robotic system represents an important advancement compared to available analogical and digital alternatives both in clinical and research contexts for cost reduction, precision and time saving opportunities.
Subject(s)
Robotics , Dental Articulators , Jaw Relation Record , Mandible , Movement , ReproductionABSTRACT
Reconstruction of bony defects is challenging when conventional grafting methods are used because of their intrinsic limitations (biological cost and/or biological properties). Bone regeneration techniques are rapidly evolving since the introduction of three-dimensional (3D) bioprinting. Bone tissue engineering is a branch of regenerative medicine that aims to find new solutions to treat bone defects, which can be repaired by 3D printed living tissues. Its aim is to overcome the limitations of conventional treatment options by improving osteoinduction and osteoconduction. Several techniques of bone bioprinting have been developed: inkjet, extrusion, and light-based 3D printers are nowadays available. Bioinks, i.e., the printing materials, also presented an evolution over the years. It seems that these new technologies might be extremely promising for bone regeneration. The purpose of the present review is to give a comprehensive summary of the past, the present, and future developments of bone bioprinting and bioinks, focusing the attention on crucial aspects of bone bioprinting such as selecting cell sources and attaining a viable vascularization within the newly printed bone. The main bioprinters currently available on the market and their characteristics have been taken into consideration, as well.
Subject(s)
Bioprinting , Bone Regeneration , Bone Substitutes/chemistry , Printing, Three-Dimensional/instrumentation , Tissue Engineering , Tissue Scaffolds/chemistry , Bioprinting/instrumentation , Bioprinting/methods , Humans , Tissue Engineering/instrumentation , Tissue Engineering/methodsABSTRACT
The aim of this study is to compare cone-beam computed tomography (CBCT) and bi-dimensional reconstructed lateral cephalograms (RLCs) in assessing mandibular body length and growth and to evaluate how mandibular reshaping influences the error in measuring mandibular body growth in bi-dimensional radiographs. Twenty-five patients with two CBCT scans taken at a mean distance of 2.21 ± 0.5 years were selected. The following measurements were performed: right and left mandibular body length at each point in time, mandibular growth, inter-gonial distance and mandibular symphyseal angle. From each CBCT, an RLC was obtained, and mandibular body length and growth were measured. Data analysis revealed a statistically and clinically significant difference in CBCT and RLC regarding the mandibular length of each patient at each point in time. However, mandibular growth was almost identical. A linear regression was performed to predict growth distortion between RLCs and CBCT depending on the ratio between transverse and sagittal mandibular growth. The expected maximum and minimum distortion, however, appeared not to be significant. In fact, a second linear regression model and a Bland-Altman test revealed a strong correlation between measurements of average mandibular body growth by CBCT and RLCs. As the same distortion occurs in the first and second RLCs, bi-dimensional radiographs remain the method of choice in evaluating mandibular body growth.
Subject(s)
Cephalometry , Cone-Beam Computed Tomography , Mandible/anatomy & histology , Mandible/diagnostic imaging , Cephalometry/methods , Dentistry/methods , Humans , Image Processing, Computer-Assisted , Imaging, Three-Dimensional , Mandible/growth & development , Models, Theoretical , Spiral Cone-Beam Computed TomographyABSTRACT
The aim of this study is to assess whether operculectomy in patients with retained second molars eases spontaneous tooth eruption in respect to untreated controls. Two hundred and twenty-two patients with delayed eruption of at least one second molar were selected from the archives of the Department of Orthodontics, Milan, Italy. Eighty-eight patients, 40 males and 48 females (mean age 14.8 ± 1.3 years), met the inclusion criteria. Records were then divided into case and control groups. The case group consisted of patients that underwent removal of the overlaying mucosa over second molars (i.e., operculectomy) and the control group consisted of subjects who retained their operculum over an unerupted second molar and were followed for one year without performing any treatment. A total of 145 impacted second molars were considered (75 cases, 70 controls). A risk ratio with 95% confidence interval was used to compare the prevalence of eruption in the two groups. Spontaneous eruption occurred in 93.3% of cases in the operculectomy group (70/75), while in the control group, 10% teeth erupted spontaneously (7/70). Spontaneous eruption in the upper arch occurred in 95.2% of cases among treated patients (40 out of 42), while in the lower arch, spontaneous eruption occurred in 90.9% of cases (30 out of 33). Spontaneous eruption of the upper second molars in the control group occurred in 8.5% of cases (3 out of 35), while in the lower arch, it occurred in 8.5% (3 out of 35). Operculectomy can ease the spontaneous eruption of retained second molars and reduce the chances of inclusion.