ABSTRACT
Activity of adjuvanted vaccines is difficult to predict in vitro and in vivo. The wide compositional and conformational range of formulated adjuvants, from aluminum salts to oil-in-water emulsions, makes comparisons between physicochemical and immunological properties difficult. Even within a formulated adjuvant class, excipient selection and concentration can alter potency and physicochemical properties of the mixture. Complete characterization of physicochemical properties of adjuvanted vaccine formulations and relationship to biological response is necessary to move beyond a guess-and-check paradigm toward directed development. Here we present a careful physicochemical characterization of a two-component nanosuspension containing synthetic TLR-4 agonist glucopyranosyl lipid adjuvant (GLA) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) at various molar ratios. Physicochemical properties were compared with potency, as measured by stimulation of cytokine production in human whole blood. We found a surprising, nonlinear relationship between physicochemical properties and GLA-DPPC ratios that corresponded well with changes in biological activity. We discuss these data in light of the current understanding of TLR4 activation and the conformation-potency relationship in development of adjuvanted vaccines.
Subject(s)
1,2-Dipalmitoylphosphatidylcholine/chemistry , Adjuvants, Immunologic/chemistry , Disaccharides/chemistry , Lipid A/analogs & derivatives , Myristates/chemistry , Nanostructures/chemistry , Toll-Like Receptor 4/agonists , 1,2-Dipalmitoylphosphatidylcholine/pharmacology , Acylation , Adjuvants, Immunologic/pharmacology , Blood Cells/drug effects , Blood Cells/immunology , Blood Cells/metabolism , Chemical Phenomena , Cytokines/agonists , Cytokines/metabolism , Disaccharides/pharmacology , Drug Combinations , Humans , Interferon-gamma Release Tests , Lipid A/chemistry , Lipid A/pharmacology , Myristates/pharmacology , Osmolar Concentration , Particle Size , Phosphorylation , Surface Properties , Suspensions , Transition TemperatureABSTRACT
BACKGROUND: Adjuvant formulations are critical components of modern vaccines based on recombinant proteins, which are often poorly immunogenic without additional immune stimulants. Oil-in-water emulsions comprise an advanced class of vaccine adjuvants that are components of approved seasonal and pandemic influenza vaccines. However, few reports have been published that systematically evaluate the in vitro stability and in vivo adjuvant effects of different emulsion components. OBJECTIVES: To evaluate distinct classes of surfactants, oils, and excipients, for their effects on emulsion particle size stability, antigen structural interactions, and in vivo activity when formulated with a recombinant H5N1 antigen. METHODS: Emulsions were manufactured by high pressure homogenization and characterized alone or in the presence of vaccine antigen by dynamic light scattering, zeta potential, viscosity, pH, hemolytic activity, electron microscopy, fluorescence spectroscopy, and SDS-PAGE. In vivo vaccine activity in the murine model was characterized by measuring antibody titers, antibody-secreting plasma cells, hemagglutination inhibition titers, and cytokine production. RESULTS: We demonstrate that surfactant class and presence of additional excipients are not critical for biological activity, whereas oil structure is crucial. Moreover, we report that simplified two-component emulsions appear more stable by particle size than more complex formulations.Finally, differences in antigen structural interactions with the various emulsions do not appear to correlate with in vivo activity. CONCLUSIONS: Oil-in-water emulsions can significantly enhance antibody and cellular immune responses to a pandemic influenza antigen. The dramatic differences in adjuvant activity between squalene-based emulsion and medium chain triglyceride-based emulsion are due principally to the biological activity of the oil composition rather than physical interactions of the antigen with the emulsion.
Subject(s)
Adjuvants, Immunologic/chemistry , Antigens, Viral/chemistry , Antigens, Viral/immunology , Influenza A Virus, H5N1 Subtype/immunology , Influenza Vaccines/chemistry , Influenza Vaccines/immunology , Animals , Antibodies, Viral/immunology , Chemistry, Pharmaceutical , Cytokines/immunology , Emulsions/chemistry , Female , Humans , Hydrogen-Ion Concentration , Influenza, Human/immunology , Influenza, Human/prevention & control , Influenza, Human/virology , Mice , Mice, Inbred C57BL , Pandemics , ViscosityABSTRACT
Immunostimulatory molecules such as monophosphoryl lipid A (MPL), a Toll-like receptor 4 (TLR4) agonist, can be formulated to enhance vaccine adjuvant effects and to promote a Th1-type immune response. This study compares the in vitro and in vivo potency of aqueous and emulsion formulations containing a synthetic MPL analogue. In addition, formulation structure and association of the synthetic TLR-4 agonist and antigen with the formulation are characterized using dynamic light scattering, zeta potential measurement, HPLC, and SDS-PAGE. The biological and biophysical effects of formulating the agonist with different oil and surfactant components from animal, plant, and synthetic sources are examined. These findings have important implications for the formulation of TLR4 agonists as well as the influence of formulation component substitution on adjuvant activity. The results indicate that (1) the agonist is associated with the oil droplets in emulsion formulations, (2) the emulsion formulations containing synthetic TLR4 agonist induce higher IgG2a/IgG1 antibody ratios than aqueous formulations or an emulsion formulation without the agonist, and (3) appropriate plant-derived components can be substituted for animal-derived components in oil-in-water emulsions without loss of biological activity.
Subject(s)
Chemical Phenomena/drug effects , Lipid A/analogs & derivatives , Toll-Like Receptor 4/agonists , Adjuvants, Immunologic/pharmacology , Animals , Biological Assay , Cell Line , Chemistry, Pharmaceutical , Chromatography, High Pressure Liquid , Electrophoresis, Polyacrylamide Gel , Emulsions , Endpoint Determination , Heat-Shock Proteins/immunology , Immunoglobulin G/immunology , Injections , Interferon-gamma/metabolism , Lipid A/chemistry , Lipid A/pharmacology , Mice , Particle Size , Protozoan Proteins/immunology , Surface Properties/drug effectsABSTRACT
The objective of this work was to conduct an in vivo comparison of nanoparticles and microparticles as vaccine delivery systems. Poly (lactide-co-glycolide) (PLG) polymers were used to create nanoparticles size 110 nm and microparticles of size 800-900 nm. Protein antigens were then adsorbed to these particles. The efficacy of these delivery systems was tested with two protein antigens. A recombinant antigen from Neisseria meningitides type B (MenB) was administered intramuscularly (i.m.) or intraperitonealy (i.p.). An antigen from HIV-1, env glycoprotein gp140 was administered intranasally (i.n.) followed by an i.m. boost. From three studies, there were no differences between the nanoparticles and micro-particles formulations. Both particles led to comparable immune responses in mice. The immune responses for MenB (serum bactericidal activity and antibody titers) were equivalent to the control of aluminum hydroxide. For the gp140, the LTK63 was necessary for high titers. Both nanoparticles and microparticles are promising delivery systems.
Subject(s)
Drug Delivery Systems , Lactic Acid/chemistry , Nanoparticles/administration & dosage , Polyglycolic Acid/chemistry , env Gene Products, Human Immunodeficiency Virus/administration & dosage , Adjuvants, Immunologic/chemistry , Animals , Anions/administration & dosage , Antigens, Bacterial/administration & dosage , Antigens, Bacterial/metabolism , Chemistry, Pharmaceutical , Lactic Acid/administration & dosage , Mice , Microspheres , Neisseria meningitidis, Serogroup B/chemistry , Neisseria meningitidis, Serogroup B/immunology , Polyglycolic Acid/administration & dosage , Polylactic Acid-Polyglycolic Acid Copolymer , env Gene Products, Human Immunodeficiency Virus/chemistry , env Gene Products, Human Immunodeficiency Virus/immunologyABSTRACT
The objective of this work was to evaluate the potency of the CpG containing oligonucleotide encapsulated within poly(lactide-co-glycolide), and coadministered with antigen adsorbed to poly(lactide-co-glycolide) microparticles (PLG particles). The formulations evaluated include, CpG added in soluble form, CpG adsorbed, and CpG encapsulated. The antigen from Neisseria meningitidis serotype B (Men B) was used in these studies. The immunogenicity of these formulations was evaluated in mice. Poly(lactide-co-glycolide) microparticles were synthesized by a w/o/w emulsification method in the presence of a charged surfactant for the formulations. Neisseria meningitidis B protein was adsorbed to the PLG microparticles, with binding efficiency and initial release measured. CpG was either added in the soluble or adsorbed or encapsulated form based on the type of formulation. The binding efficiency, loading, integrity and initial release of CpG and the antigen were measured from all the formulations. The formulations were then tested in mice for their ability to elicit antibodies, bactericidal activity and T cell responses. Encapsulating CpG within PLG microparticles induced statistically significant higher antibody, bactericidal activity and T cell responses when compared to the traditional method of delivering CpG in the soluble form.
Subject(s)
CpG Islands , Adsorption , Base Sequence , Drug Compounding , Electrophoresis, Polyacrylamide Gel , MicrospheresABSTRACT
The chemical composition of the surface of anionic PLG microparticles before and after adsorption of vaccine antigens was measured using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). The interfacial distributions of components will reflect underlying interactions that govern properties such as adsorption, release, and stability of proteins in microparticle vaccine delivery systems. Poly(lactide-co-glycolide) microparticles were prepared by a w/o/w emulsification method in the presence of the anionic surfactant dioctyl sodium sulfosuccinate (DSS). Ovalbumin, lysozyme, a recombinant HIV envelope glyocoprotein and a Neisseria meningitidis B protein were adsorbed to the PLG microparticles, with XPS and time-of-flight secondary mass used to analyze elemental and molecular distributions of components of the surface of lyophilized products. Protein (antigen) binding to PLG microparticles was measured directly by distinct elemental and molecular spectroscopic signatures consistent with amino acids and excipient species. The surface sensitive composition of proteins also included counter ions that support the importance of electrostatic interactions being crucial in the mechanism of adsorptions. The protein binding capacity was consistent with the available surface area and the interpretation of previous electron and atomic force microscope images strengthened by the quantification possible by XPS and the qualitative identification possible with TOF-SIMS. Protein antigens were detected and quantified on the surface of anionic PLG microparticles with varying degrees of efficiency under different adsorption conditions such as surfactant level, pH, and ionic strength. Observable changes in elemental and molecular composition suggest an efficient electrostatic interaction creating a composite surface layer that mediates antigen binding and release.
Subject(s)
Antigens/chemistry , Drug Delivery Systems , Lactic Acid/chemistry , Polyglycolic Acid/chemistry , Polymers/chemistry , Adsorption , Amino Acids/analysis , Antigens/administration & dosage , Microspheres , Peptide Fragments/analysis , Polylactic Acid-Polyglycolic Acid Copolymer , Spectrometry, Mass, Secondary Ion , Spectrum Analysis , X-RaysABSTRACT
We have previously shown that cationic polylactide-co-glycolide (PLG) microparticles can be effectively used to adsorb DNA and generate potent immune responses in vivo. We now describe a modified and easier process containing a single lyophilization step to prepare these cationic PLG microparticles with adsorbed DNA. Cationic PLG microparticle formulations with adsorbed DNA were prepared using a modified solvent evaporation technique. Formulations with a fixed CTAB content and DNA load were prepared. The loading efficiency and 24h DNA release was evaluated for each formulation and compared to the earlier method of preparation. Select formulations were tested in vivo. The modified cationic PLG microparticle preparation method with a single lyophilization step, showed comparable physico-chemical behaviour to the two lyophilization steps process and induced comparable immune. The modified process with a single lyophilization step is a more practical process and can be utlized to prepare cationic PLG microparticles with adsorbed DNA on a large scale.
Subject(s)
Cetrimonium Compounds/chemistry , DNA/chemistry , Microspheres , Polyglactin 910/chemistry , Adsorption , Animals , Cetrimonium , Cetrimonium Compounds/administration & dosage , DNA/administration & dosage , Drug Compounding , Female , Freeze Drying , Immunization , Immunoglobulin G/blood , Mice , Mice, Inbred BALB C , Polyglactin 910/administration & dosageABSTRACT
The objective of this work was to obtain a nanoparticle formulation that could be sterile filtered, lyophilized, and resuspended to the initial size with excipients appropriate for use as a vaccine formulation. Poly(lactide-co-glycolide) (PLG) polymers were used to create nanoparticles ranging in size from 110 to 230 nm. Protein antigens were adsorbed to the particles; the protein-nanoparticles were then lyophilized with the excipients. Vaccine compatible excipient combinations of sugars alone, surfactants alone, and sugars and surfactants were tested to find conditions where initial particle size was recovered. Sterile filtration of smaller nanoparticles led to minimal PLG losses and allowed the particle preparation to be a nonaseptic process. We found that the smaller nanoparticles of size approximately 120 nm required higher surfactant concentration to resuspend postlyophilization than slightly larger ( approximately 220 nm) particles. To resuspend 120 nm nanoparticles formulations of poly(vinyl alcohol) (PVA) with sucrose/mannitol or dioctyl sodium sulfosuccinate (DSS) with trehalose/mannitol were sufficient. The protein-nanoparticles resuspension with the same excipients was dependent on the protein and protein loading level. The nanoparticle formulations in vivo were either similar or had enhanced immunogenicity compared to aluminum hydroxide formulations. A lyophilized nanoparticle formulation with adsorbed protein antigen and minimal excipients is an effective vaccine delivery system.
Subject(s)
Drug Delivery Systems , Meningococcal Vaccines/administration & dosage , Nanoparticles/administration & dosage , Nanoparticles/chemistry , Animals , Bacterial Proteins/chemistry , Chemistry, Pharmaceutical , Drug Combinations , Excipients/chemistry , Female , Filtration , Freeze Drying , Immunoglobulin G/blood , Isatin/analogs & derivatives , Isatin/chemistry , Mannitol/chemistry , Mice , Mice, Inbred Strains , Ovalbumin/chemistry , Polyglactin 910/chemistry , Polyvinyl Alcohol/chemistry , Pyridines/chemistry , Serum Albumin, Bovine/chemistry , Succinates/chemistry , Surface-Active Agents/chemistry , Trehalose/chemistryABSTRACT
Several groups have shown that vaccine antigens can be encapsulated within polymeric microparticles and can serve as potent antigen delivery systems. We have recently shown that an alternative approach involving charged polylactide co-glycolide (PLG) microparticles with surface adsorbed antigen(s) can also be used to deliver antigen into antigen presenting cell (APC). We have described the preparation of cationic and anionic PLG microparticles which have been used to adsorb a variety of agents, which include plasmid DNA, recombinant proteins and adjuvant active oligonucleotides. These PLG microparticles were prepared using a w/o/w solvent evaporation process in the presence of the anionic surfactants, including DSS (dioctyl sodium sulfosuccinate) or cationic surfactants, including CTAB (hexadecyl trimethyl ammonium bromide). Antigen binding to the charged PLG microparticles was influenced by several factors including electrostatic and hydrophobic interactions. These microparticle based formulations resulted in the induction of significantly enhanced immune responses in comparison to alum. The surface adsorbed microparticle formulation offers an alternative and novel way of delivering antigens in a vaccine formulation.
Subject(s)
Drug Carriers , Microspheres , Polyglactin 910 , Vaccination/methods , Adjuvants, Immunologic , Adsorption , Animals , Antigens , DNA/metabolism , Humans , Vaccines, DNAABSTRACT
Although alum is the most commonly used vaccine adjuvant, it has some limitations for use with the next generation recombinant antigens. We explored the use of alternative adjuvant formulations (poly lactide co-glycolide (PLG) microparticles, MF59 emulsion, CAP and l-tyrosine suspension) in comparison with five different vaccine antigens--namely, diphtheria toxoid (DT), tetanus toxoid (TT), HBsAg, Men C conjugate and MB1. The results indicated that although alum was optimal for bacterial toxoid based vaccines, it was not highly potent for MB1, Men C or HBsAg antigens. MF59 emulsion stood out as a good alternative to alum for TT, HBsAg, MB1 and Men C vaccines. On the other hand l-tyrosine suspension and CAP did not enhance immune responses over alum with most antigens. PLG microparticles were comparable or better than alum with both MB1 and Men C conjugate vaccine. The study indicates that it is possible to replace alum with other adjuvant formulations like MF59 and PLG and maintain and/or improve immune responses with some vaccine antigens.
Subject(s)
Adjuvants, Immunologic/pharmacology , Vaccines/immunology , Alum Compounds/pharmacology , Animals , Calcium Phosphates/pharmacology , Diphtheria Toxoid/immunology , Hepatitis B Surface Antigens/immunology , Immunization , Lactic Acid/pharmacology , Meningococcal Vaccines/immunology , Mice , Mice, Inbred BALB C , Particle Size , Polyglycolic Acid/pharmacology , Polylactic Acid-Polyglycolic Acid Copolymer , Polymers/pharmacology , Polysorbates/pharmacology , Squalene/pharmacology , Tetanus Toxoid/immunologyABSTRACT
PURPOSE: Monophosphoryl lipid A (MPL) and the synthetic LPS mimetic RC529, encapsulated in poly(lactide-co-glycolide) (PLG) microparticles, were evaluated as immune potentiators in the presence of either HIV-1 gp120 protein or antigen from Neisseria meningitidis serotype B (Men B). The immunogenicity of these formulations was evaluated in mice and compared to CpG containing oligonucleotide. This work was done as part of an ongoing effort to enhance the potency of vaccine candidates against HIV and Men B. METHODS: Microparticles were made by a solvent evaporation method. Blank microparticles as well as microparticles with encapsulated MPL or RC529 were made using the PLG polymer RG503 and the ionic surfactant Dioctylsulfosuccinate by the water-in-oil-in-water emulsion technique. Antigens from HIV-1 and Men B were adsorbed on the surface of these anionic microparticles and the final formulations characterized for protein loading, release, and integrity. The formulations were then tested in mice for their ability to elicit antibodies and bactericidal activity in comparison with CpG containing oligonucleotide. RESULTS: We have found that adding soluble immune potentiators to Men B antigen formulated on PLG microparticles significantly enhanced the immune response to a level comparable to that obtained using CpG. In a separate study, we found that encapsulating MPL or RC529 in PLG microparticles further enhanced the response in comparison to soluble CpG, which is our control group. Similarly, adding soluble immune potentiators to gp120 antigen formulated on PLG microparticles resulted in a significant enhancement of the immune response. Moreover, delivering MPL or RC529 encapsulated in PLG microparticles with gp120 adsorbed on PLG microparticles, resulted in even further enhancement of serum titers over those obtained with soluble immune potentiators. These titers were comparable to or greater than those obtained with soluble CpG, the control group. This effect was observed for both antigens regardless of whether or not the immune potentiator and the antigen were used with the same or with separate particles. In conclusion, the advantages of encapsulating MPL and RC529 lie not only in the enhanced immune response they elicit, but also in the convenience of handling these relatively insoluble compounds, and flexibility in vaccine design. The fact that MPL and RC529 are readily soluble in methylene chloride used for the manufacturing of PLG microparticles makes it easy to avoid solubility issues. Moreover, formulating antigen and immune potentiator with the same particle offers an attractive approach to vaccine delivery.
Subject(s)
Adjuvants, Immunologic/chemistry , Lactic Acid/chemistry , Lipid A/analogs & derivatives , Microspheres , Polyglycolic Acid/chemistry , Polymers/chemistry , Adjuvants, Immunologic/pharmacology , Animals , CHO Cells , Chemistry, Pharmaceutical , Cricetinae , Cricetulus , Lactic Acid/pharmacology , Lipid A/chemistry , Lipid A/pharmacology , Mice , Microbial Sensitivity Tests , Neisseria meningitidis/drug effects , Polyglycolic Acid/pharmacology , Polylactic Acid-Polyglycolic Acid Copolymer , Polymers/pharmacologyABSTRACT
This work examines physico-chemical properties influencing protein adsorption to anionic PLG microparticles and demonstrates the ability to bind and release vaccine antigens over a range of loads, pH values, and ionic strengths. Poly(lactide-co-glycolide) microparticles were synthesized by a w/o/w emulsification method in the presence of the anionic surfactant DSS (dioctyl sodium sulfosuccinate). Ovalbumin (OVA), carbonic anhydrase (CAN), lysozyme (LYZ), lactic acid dehydrogenase, bovine serum albumin (BSA), an HIV envelope glyocoprotein, and a Neisseria meningitidis B protein were adsorbed to the PLG microparticles, with binding efficiency, initial release and zeta potentials measured. Protein (antigen) binding to PLG microparticles was influenced by both electrostatic interaction and other mechanisms such as van der Waals forces. The protein binding capacity was directly proportional to the available surface area and may have a practical upper limit imposed by the formation of a complete protein monolayer as suggested by AFM images. The protein affinity for the PLG surface depended strongly on the isoelectric point (pI) and electrostatic forces, but also showed contributions from nonCoulombic interactions. Protein antigens were adsorbed on anionic PLG microparticles with varying degrees of efficiency under different conditions such as pH and ionic strength. Observable changes in zeta potentials and morphology suggest the formation of a surface monolayer. Antigen binding and release occur through a combination of electrostatic and van der Waals interactions occurring at the polymer-solution interface.
Subject(s)
Antigens/chemistry , Drug Delivery Systems , Lactic Acid/chemistry , Polyglycolic Acid/chemistry , Polymers/chemistry , Proteins/chemistry , Adsorption , Carbonic Anhydrases/chemistry , HIV Envelope Protein gp120/chemistry , Hydrogen-Ion Concentration , Microscopy, Atomic Force , Microspheres , Muramidase , Osmolar Concentration , Ovalbumin/chemistry , Particle Size , Polylactic Acid-Polyglycolic Acid Copolymer , Protein Binding , Static Electricity , Surface Properties , VaccinesABSTRACT
Polymeric microparticles with encapsulated antigens have become well-established in the last decade as potent antigen delivery systems and adjuvants, with experience being reported from many groups. However, the authors have recently shown that an alternative approach involving charged polylactide co-glycolide (PLG) microparticles with surface adsorbed antigen(s) can also be used to deliver antigen into antigen-presenting cell populations. The authors have described the preparation of cationic and anionic PLG microparticles that have been used to adsorb a variety of agents, to include plasmid DNA, recombinant proteins and adjuvant active oligonucleotides. These novel PLG microparticles were prepared using a w/o/w solvent evaporation process in the presence of the anionic surfactants, such as dioctyl sodium sulfosuccinate, or cationic surfactants, such as hexadecyl trimethyl ammonium bromide. Antigen binding to the charged PLG microparticles was influenced by both electrostatic interaction and other mechanisms, including hydrophobic interactions. Adsorption of antigens to microparticles resulted in the induction of significantly enhanced immune responses in comparison with alternative approaches. The surface adsorbed microparticle formulation offers an alternative way of delivering antigens as a vaccine formulation.
Subject(s)
Antigens/administration & dosage , Drug Delivery Systems , Lactic Acid , Polyglycolic Acid , Polymers , Animals , Drug Carriers , Humans , Microspheres , Polylactic Acid-Polyglycolic Acid Copolymer , Vaccines, DNA/administration & dosageABSTRACT
The adsorption behavior of model proteins onto anionic poly(lactide-co-glycolide) (PLG) microparticles was evaluated. PLG microparticles were prepared by a w/o/w solvent evaporation process in the presence of the anionic surfactant dioctyl sodium sulfosuccinate (DSS). The effect of surfactant concentration and adsorption conditions on the adsorption efficiency and release rates in vitro was also studied. Subsequently, the microparticle formulation was tested to evaluate the efficacy of anionic microparticles as delivery systems for recombinant antigens from Neisseria meningitides type B (Men B), with and without CpG adjuvant. Protein (antigen) binding to anionic PLG microparticles was influenced by both electrostatic interaction and by other mechanisms, including hydrophobic attraction. The Men B antigens adsorbed efficiently onto anionic PLG microparticles and, following immunization in mice, induced potent enzyme-linked immunosorbent assay (ELISA) and serum bactericidal activity in comparison to alum-adsorbed formulations. These Men B antigens represent an attractive approach for vaccine development.
Subject(s)
Antigens, Bacterial/administration & dosage , Neisseria meningitidis, Serogroup B/immunology , Adjuvants, Immunologic , Adsorption , Alum Compounds , Animals , Anions , Antibodies, Bacterial/analysis , Antigens, Bacterial/metabolism , Drug Delivery Systems , Enzyme-Linked Immunosorbent Assay , Mice , Microspheres , Muramidase/chemistry , Particle Size , Recombinant Proteins/administration & dosage , Recombinant Proteins/metabolism , Serum Bactericidal Test , Succinates , Surface-Active Agents , ThermodynamicsABSTRACT
PURPOSE: To evaluate the delivery of a novel HIV-1 antigen (gp120dV2 SF162) by surface adsorption or encapsulation within polylactide-co-glycolide microparticles and to compare both the formulations for their ability to preserve functional activity as measured by binding to soluble CD4. METHODS: Poly(lactide-co-glycolide) microparticles were synthesized by a water-in-oil-in-water (w/o/w) emulsification method in the presence of the anionic surfactant dioctylsulfosuccinate (DSS) or polyvinyl alcohol. The HIV envelope glyocoprotein was adsorbed and encapsulated in the PLG particles. Binding efficiency and burst release measured to determine adsorption characteristics. The ability to bind CD4 was assayed to measure the functional integrity of gp120dV2 following different formulation processes. RESULTS: Protein (antigen) binding to PLG microparticles was influenced by both electrostatic interaction and other mechanisms such as hydrophobic attraction and structural accommodation of the polymer and biomolecule. The functional activity as measured by the ability of gp120dV2 to bind CD4 was maintained by adsorption onto anionic microparticles but drastically reduced by encapsulation. CONCLUSIONS: The antigen on the adsorbed PLG formulation maintained its binding ability to soluble CD4 in comparison to encapsulation, demonstrating the feasibility of using these novel anionic microparticles as a potential vaccine delivery system.