Pushing boundaries: Anterolateral thigh free flaps for extensive scalp defects beyond previous limits, leveraging imaging modalities with ultrasound and indocyanine green.

BACKGROUND: Scalp defect reconstruction poses considerable challenges, with ongoing debates regarding the most effective strategies. While the latissimus dorsi (LD) flap has traditionally been favored, the anterolateral thigh (ALT) flap has been well described as a versatile alternative for addressing extensive scalp defects. This study underscores the success of scalp reconstruction using ALT flaps, notably pushing the boundaries of previously reported flap sizes. Our approach leverages the use of indocyanine green (ICG) perfusion to guide precise preoperative planning and vascular modification, contributing to improved outcomes in challenging cases. METHODS: We performed 43 ALT flap reconstructions for scalp defects between 2016 and 2023. We collected patients' demographic and clinical data and evaluated flap size and recipient vessels and additional surgical techniques. Detailed preoperative plans with ultrasound and ICG use for intraoperative plans were performed to find perforators location. The cohort was divided into two, with or without complications on flaps, and analyzed depending on its surgical details. RESULTS: This study involved 38 patients with extensive scalp defects (mean age: 69.4 ± 11 years) who underwent ALT perforator flap transfers (mean flap size: 230.88 ± 145.6 cm2). There was only one case of unsuccessful flap transfer, and four cases had a few complications. The characteristics of the complication group included a large flap size (303.1 ± 170.9 vs. 214.9 ± 136.6 cm2, P = .211), few perforator numbers without pedicle manipulation, lack of intraoperative indocyanine green administration (75% vs. 25%, P = .607), and the use of superficial temporal vessels as recipient vessels. CONCLUSIONS: Scalp reconstruction using large ALT free flaps with the aid of imaging modalities facilitates the optimization of surgical techniques, such as pedicle manipulation, perforator numbers, and vein considerations, thereby contributing to successful reconstruction.

Generation of sarconoids from angiosarcoma patients as a systematic-based rational approach to treatment.

Angiosarcoma is a rare subtype of malignant neoplasm originating from vascular or lymphatic endothelial cells; its low incidence has posed significant challenges for comprehensive investigations into its pathogenic mechanisms and the development of innovative treatment modalities through in vitro and in vivo models. Recent endeavors spearheaded by patient-partnered research initiatives have aimed to elucidate the intricacies of angiosarcomas by leveraging biological omics approaches, with the overarching objective of enhancing prognostic indicators and therapeutic options for this uncommon pathology. To bridge the gap between preclinical research and translational applications, we engineered angiosarcoma-derived organoids from surgically resected primary tumors, hereafter referred to as "sarconoids," as a proof-of-concept model. A novel protocol for the establishment of these sarconoids has been developed and validated. To ensure that the sarconoids faithfully recapitulate the heterogeneity and complexities of the patients' original tumors, including transcriptomic signatures, cell-type specificity, and morphological traits, exhaustive histological and transcriptomic analyses were conducted. Subsequently, we expanded the scope of our study to include an evaluation of a sarconoid-based drug screening platform; for this purpose, a drug library (AOD IX), supplied by the National Cancer Institute's Developmental Therapeutics Program, was screened using 96-well plates. Our findings suggest that sarconoids can be reliably generated from angiosarcoma patient-derived tissues and can serve as accurate models for evaluating therapeutic responses, thereby holding far-reaching implications for translational research and clinical applications aimed at advancing our understanding and treatment of angiosarcoma.

Enhancing Surgical Approach: Breakthrough Markerless Surface Registration With Augmented Reality for Zygomatic Complex Fracture Surgeries.

BACKGROUND: Innovative technologies with surgical navigation have been used for enhancing surgical accuracies for zygomaticomaxillary complex (ZMC) fractures and offers advantages in precision, accuracy, effectiveness, predictability, and symmetry improvement. Moreover, augmented reality (AR) navigation technology combines virtual reality, 3-dimensional (3D) reconstruction, and real-time interaction, making it ideal for bone tissue operations. Our study explored the usefulness and clinical efficacy of AR technology in intraoperative guidance for reducing ZMC fractures. METHODS: We retrospectively studied 35 patients with zygomatic complex fractures, comparing outcomes of AR-guided and conventional methods. Furthermore, the AR system provided real-time visualization and guidance. The evaluation included reduction accuracy using root mean square (RMS) value and symmetry analysis using a mirror image of 3D models. Results demonstrated the feasibility and effectiveness of the AR-guided method in improving outcomes and patient satisfaction. RESULTS: In 35 patients (25 males, 10 females), AR-guided (n = 19) and conventional (n = 16) approaches were compared. Age, sex, and fracture type exhibited no significant differences between groups. No complications occurred, and postoperative RMS error significantly decreased ( P < 0.001). The AR group had a lower postoperative RMS error ( P = 0.034). CONCLUSIONS: Augmented reality-guided surgery improved accuracy and outcomes in zygomatic complex fractures. Real-time visualization enhanced precision during reduction and fixation. This innovative approach promises enhanced surgical accuracy and patient outcomes in craniofacial surgery.

Use of Auricular Composite graft in Rib-Cartilage based Rhinoplasty for Contracted Nose Correction.

BACKGROUND: This study investigated the effects of combining an auricular composite graft with rib cartilage-based rhinoplasty to correct contracted noses in Asian patients with a history of multiple previous operations. METHODS: A total of 43 patients were included in the retrospective analysis of secondary rhinoplasty procedures. The surgical approach involved short-nose correction, utilizing rib cartilage for septal extension grafts and chondrocutaneous composite grafts harvested from the conchal part of the ear for internal nasal lining reconstruction. Our assessment encompassed clinical outcomes, the occurrence of complications, and the utilization of three-dimensional (3D) photography for nasal measurements at the preoperative, 3-month, and 1-year postoperative stages. RESULTS: Regarding graft survival, 12 (27.9%) patients showed >80% graft engraftment, followed by 29 (67.4%) patients with 50%-80% graft engraftment, and 2 (4.6%) patients with 20%-50% graft engraftment. Two of these patients required wound irrigation for infection control and additional repair and were finally discharged without significant nasal deformity. At 3 months postoperatively, 3D anthropometry showed significant differences in nasal dorsum length (4.46 ± 1.79 mm), nasal height (1.25 ± 1.25 mm), nasal tip projection (4.06 ± 1.76 mm), and columellar-labial angle (22.75° ± 14.19°). No significant relapse of nasal parameters was noted 1 year postoperatively. CONCLUSION: Auricular composite graft combined with rib cartilage-based rhinoplasty enables the comprehensive restoration of nasal structures, addressing the inner, intermediate, and outer layers. This approach can serve as an effective and sustainable option for correcting contracted noses in Asian patients who have undergone multiple operations.

Unipolar myomectomy for congenital muscular torticollis: A retrospective study.

In this study, unipolar myomectomy was used to address limited neck movement and tight muscles in pediatric, adolescent, and adult patients. A retrospective chart review was performed for patients from January 2006 to February 2023, who were diagnosed with congenital muscular torticollis and underwent a unipolar myomectomy. Outcome evaluation, adapted from the Cheng and Tang system - cervicomandibular angle (CMA), facial asymmetry, cranial asymmetry, tilting limitation (TL), rotation limitation (RL), subjective assessment, and residual contracture - included various parameters scored from 0 to 3 points and categorized as poor, fair, good, or excellent. In total, the data for 36 patients (21 males and 15 females) were analyzed. Participants were aged 0.8-38 years. Surgery improved CMA, RL, and TL, with no complications (12.2°-1.2°, 18.6°-5.2°, and 17.6°-6.5° for CMA, RL, and TL, respectively; p < 0.001). The mean overall score was comparable among different age groups (2.8 ± 0.5, 2.2 ± 0.62, and 2.1 ± 0.37 for the pediatric, adolescent, and adult groups, respectively). Within the limitations of the study it seems that unipolar myomectomy is a promising, effective surgical option for individuals of multiple age groups.

A Grading System-Guided Approach to the Severely Contracted Nose.

PURPOSE: Capsular contracture is a rare but serious complication of silicone implant-based augmentation rhinoplasty. When severe, the contracture can affect all layers of the nose, causing significant scarring and disfigurement. There is currently no standardized method of evaluating contracted noses and a paucity of literature on the treatment of severe contracture. Therefore, this study aimed to establish a comprehensive grading system and treatment approach for patients with nasal contracture secondary to silicone implant-based rhinoplasty. METHODS: We conducted a retrospective analysis on patients who presented with nasal contracture from 2012 to 2021. All preoperative photographs were evaluated by two plastic surgeons, twice at 1-month intervals. The proposed grading system comprised: normal (grade I), mild contracture with detectable implant (grade II), moderate contracture with skin thinning (grade III), severe contracture with short nose deformity (grade IV), and destructive contracture with scarring of the dorsal skin (grade Va), or columella deficiency (grade Vb). Inter- and intraobserver agreement was assessed using the kappa value to determine the reliability of the system. RESULTS: Based on 87 patients, interobserver agreement was substantial for both evaluation time points (k = 0.701 and 0.723). Intraobserver agreement was excellent for evaluator 1 (k = 0.822) and substantial for evaluator 2 (k = 0.699). CONCLUSIONS: Using this grading system, we propose a graduated treatment algorithm for contracted noses. Most notable is our use of radial forearm free or forehead flaps to reconstruct the columella in grade Vb patients. By combining reconstructive and aesthetic principles, this treatment approach provides an effective and elegant solution for the management of the severely contracted nose. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Functional outcomes and recurrence determinants in craniofacial fibrous dysplasia: Insights from 3D computed tomography and comprehensive clinical evaluation.

BACKGROUND: This study aimed to identify risk factors for postoperative lesion regrowth and to assess functional outcomes in craniofacial fibrous dysplasia, using a three-dimensional computed tomographic volumetric analysis. METHODS: A retrospective analysis was conducted on 47 patients with craniofacial fibrous dysplasia who were treated from July 2005 to December 2020. Patients were treated with either conservative shaving or radical excision followed by reconstruction. Demographic data, surgical details, lesion recurrence, and functional outcomes were assessed. Lesion volume changes and recurrence were evaluated clinically and through a computed tomographic volumetric analysis. RESULTS: Among the patients, 16 underwent conservative treatment, whereas 31 received radical treatment. The radical group showed more significant improvements in functional outcomes, particularly in orbital dystopia and facial asymmetry. Postoperative lesion volume was notably lower in the radical group (41.94 ± 38.13 cm3) compared with the conservative group (78.3 ± 47.3 cm3, p = 0.008). This reduction was maintained over an average follow-up of 3 years. Lesion growth rates were similar between the groups (8.17 ± 5.85% in radical vs. 5.84 ± 6.43% in conservative, p = 0.268). Multivariate analysis indicated that patients aged ≤20 years and those with multifocal involvement had significantly higher risks of recurrence, with adjusted odds ratios of 11.269 (p = 0.039) and 6.914 (p = 0.046), respectively. CONCLUSIONS: Our findings suggest that both conservative and radical treatments for craniofacial fibrous dysplasia provide benefits, with the radical approach notably enhancing functional outcomes. However, neither method definitively reduces lesion recurrence, highlighting the necessity for an individualized treatment strategy. This approach should balance functional enhancement with recurrence risks, tailored to each patient's specific clinical scenario.

Effect of Therapeutic Radiation on Polycaprolactone/Hydroxyapatite Biomaterials in a Calvarial Model.

Bone defects caused by cancer resection often require postoperative radiotherapy. Although various synthetic polymers have been introduced as graft materials, their biological behavior after radiation exposure remains unclear. Here, we investigated how polycaprolactone/hydroxyapatite (PCL/HA) implants respond to therapeutic radiation exposure (in terms of volume and bone regeneration). Four 8 mm diameter calvaria defects were surgically created on the parietal bone of 6 rabbits. PCL/HA implants made of porous, solid, and hybrid polymers were grafted by random placement in each defect. The fourth defect was left untreated. Four weeks after surgery, radiation exposure was conducted weekly for 6 weeks (total: 48 Gy). Micro-computed tomography and histologic analysis were performed at 3 and 6 months, and 6 months postradiation, respectively. The total augmented volumes of all implants showed no significant differences between 3- and 6-months postradiation computed tomography images. In histologic analysis, new bone areas were 0.45±0.11 mm2, 2.02±0.34 mm2, and 3.60±0.77 mm2 in solid, hybrid, and porous polymer grafts, respectively. Bone regeneration was limited to the periphery of the defect in the hybrid and porous polymer grafts, whereas new bone formed inside the porous implant. The total augmented volume of the defect was maintained without significant absorption even after radiation exposure. The PCL/HA implant maintained its structure despite radiation exposure. The porous PCL/HA implant demonstrated excellent bone regeneration, followed by the hybrid and solid implants. The PCL/HA implant is a promising candidate for bone defect reconstruction.

Application of augmented reality using automatic markerless registration for facial plastic and reconstructive surgery.

This study aimed to present a novel markerless augmented reality (AR) system using automatic registration based on machine-learning algorithms that visualize the facial region and provide an intraoperative guide for facial plastic and reconstructive surgeries. This study prospectively enrolled 20 patients scheduled for facial plastic and reconstructive surgeries. The AR system visualizes computed tomographic data in three-dimensional (3D) space by aligning with the point clouds captured by a 3D camera. Point cloud registration consists of two stages: the preliminary registration gives an initial estimate of the transformation using landmark detection, followed by the precise registration using Iterative Closest Point algorithms. Computed Tomography (CT) data can be visualized as two-dimensional slice images or 3D images by the AR system. The AR registration error was defined as the cloud-to-cloud distance between the surface data obtained from the CT and 3D camera. The error was calculated in each facial territory, including the upper, middle, and lower face, while patients were awake and orally intubated, respectively. The mean registration errors were 1.490 ± 0.384 mm and 1.948 ± 0.638 mm while patients were awake and orally intubated, respectively. There was a significant difference in the errors in the lower face between patients while they were awake (1.502 ± 0.480 mm) and orally intubated (2.325 ± 0.971 mm) when stratified by facial territories (p = 0.006). The markerless AR can accurately visualize the facial region with a mean overall registration error of 1-2 mm, with a slight increase in the lower face due to errors arising from tube intubation.

Effects of an Ultra-Polished Scalpel on Incisional Wounds in a Diabetic Model.

Inflammation after surgical incisions is related to the degree of tissue damage. Healing with low inflammation is desirable, especially in patients with compromised healing potential. This experimental study was conducted to assess the degree of inflammatory reaction and scar formation from incisions made by an ultra-polished scalpel (UPS). Two paravertebral incisions were made with a conventional scalpel (CS) and a UPS in 18 individual rats with diabetes. The fibrotic tissue (scar) area and expression levels of collagen, transforming growth factor, and matrix metalloproteinases were quantified on postoperative days 3, 7, and 30. The scar widths and areas were significantly lower in the UPS group than in the CS group. The scar widths were 64.3 ± 14.7 µm and 86.8 ± 12.1 µm in the UPS and CS groups, respectively (P = 0.03). The scar areas were 11,398 ± 1595 µm2 in the UPS group and 17,433 ± 3487 µm2 in the CS group (P = 0.014). The UPS group had less inflammation on day 3, less transforming growth factor synthesis on days 3 and 7, lower levels of matrix metalloproteinases, and less collagen synthesis on day 7 than did the CS group. The UPS achieved less local inflammation by reducing the local tissue damage in diabetic rat models, enabling better healing, and resulting in less scar formation. The UPS warrants further clinical study as it may bring beneficial outcomes for patients with impaired healing capability and patients who seek to reduce scarring.

Hemi one-piece distraction osteogenesis for unilateral coronal craniosynostosis.

INTRODUCTION: It was the aim of the study to assess the efficacy of the hemi one-piece distraction osteogenesis and to compare it to the traditional one-piece distraction osteogenesis technique. METHODS: Two different surgical techniques were used; the one-piece distraction and the hemi one-piece distraction. The principal distinction between the two techniques is that in the hemi style approach, the intact sutures on the contralateral side were left undisturbed, with no osteotomy performed. RESULTS: The hemi one-piece group had a significantly lower median value of plastic surgery time, total operation time, and transfusion rate (plastic surgery time 69 min (range 65-120) vs. 20 min (range 17-32.5), p < 0.001; transfusion 80 mL (range 0-150) vs. 0 mL (0-60), p = 0.1. Nasofrontal advancement was successful with no major complications. Median endocranial angulation improved (one-piece: 166.1°-176.0°, hemi: 162.9°-173.0°, p = 0.023 & p = 0.012 respectively). CONCLUSION: This study reveals less invasive, highly effective techniques for craniosynostosis treatment, notably a unilateral osteotomy with distraction method. Nevertheless, to confirm their long-term efficacy and durability, more studies with longer follow-ups are essential.

Impact of One-Piece Fronto-Orbital Distraction Osteogenesis on Orbital Morphology and Strabismus Development in Unilateral Craniosynostosis.

BACKGROUND: Unicoronal craniosynostosis (UCS) is associated with orbital dysmorphologies that underlie ophthalmologic dysfunctions, such as strabismus. This study aimed to assess orbital dysmorphology in patients with UCS and how it changes after fronto-orbital distraction osteogenesis (FODO), and to analyze the features of new-onset strabismus. METHODS: A retrospective analysis was conducted on 19 patients with UCS who underwent FODO between May of 2008 and November of 2020. Ophthalmologic records and computed tomographic scans were reviewed. Seven parameters, including width, height, volume, and four-direction orbital angles were evaluated in patients with UCS and compared with those of age-matched control subjects. RESULTS: The superolateral angle and vertical angle of the ipsilateral orbit and the superomedial angle (SMA) of the contralateral orbit were more obtuse than those of the controls. Following FODO, the ipsilateral superolateral angle was decreased from 69.2 ± 5.4 degrees to 59.1 ± 4.2 degrees ( P = 0.001), and the contralateral SMA was decreased from 64.8 ± 5.8 degrees to 60.2 ± 6.0 degrees ( P = 0.003). Four of the 17 patients without strabismus in the preoperative period developed strabismus, and the horizontal type was the most common. Logistic regression analysis demonstrated a significant association between new-onset strabismus and SMA difference between both orbits (OR, 1.39; P = 0.041). CONCLUSIONS: Orbital dysmorphology in the UCS is bilateral, and the orbital roofs are dysmorphic. The bilateral orbital roofs are lifted toward the fused coronal suture and can be improved after FODO. Horizontal strabismus, such as esotropia and exotropia, is common after FODO, and superomedial orbital roof asymmetry may play a role in its development. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Efficacy and feasibility of a forehead flap surgical guide for nasal reconstruction.

For successful nasal reconstruction using a forehead flap, three-dimensional (3D) nasal defects need to be translated into a two-dimensional (2D) forehead surface. For this study, a patient-specific 3D-printed forehead flap guide that could precisely translate a virtually simulated nasal shape into a 2D flap template was developed. The study aimed to evaluate the feasibility and efficacy of a 3D-printed forehead flap guide for nasal reconstructions. The 3D nasal surface was scanned using a 3D camera, and a 'digital clay' process was performed to correct the nasal deformity. The 3D morphology was flattened into a 2D forehead flap guide. The guide was 3D-printed and used for the forehead flap design. Photographic records were used to conduct anthropometric and aesthetic evaluations. Between October 2016 and August 2020, forehead flaps were performed using the forehead flap guide (guide group) and traditional templating method (control group) in 16 and 15 patients, respectively. The alar shape was more symmetric in the guide group than in the control group, with smaller right-to-left differences in alar width (p = 0.01) and height (p = 0.05). Regarding aesthetic evaluations, nose contour (p = 0.02) and nasal symmetry (p = 0.033) were better in the guide group than in the control group. The mean operative time was significantly shorter (91.9 ± 10.7 min) in the guide group than in the control group (116.4 ± 13.6 min) (p = 0.001). Our findings suggest that a 3D-printed forehead flap surgical guide can be effectively used in nasal reconstruction to reduce operative time and improve aesthetic outcomes.

Current concepts of vascular anomalies.

Vascular anomalies encompass a variety of malformations and tumors that can result in severe morbidity and mortality in both adults and children. Advances have been made in the classification and diagnosis of these anomalies, with the International Society for the Study of Vascular Anomalies establishing a widely recognized classification system. In recent years, notable progress has been made in genetic testing and imaging techniques, enhancing our ability to diagnose these conditions. The increasing sophistication of genetic testing has facilitated the identification of specific genetic mutations that help treatment decisions. Furthermore, imaging techniques such as magnetic resonance imaging and computed tomography have greatly improved our capacity to visualize and detect vascular abnormalities, enabling more accurate diagnoses. When considering reconstructive surgery for facial vascular anomalies, it is important to consider both functional and cosmetic results of the procedure. Therefore, a comprehensive multidisciplinary approach involving specialists from dermatology, radiology, and genetics is often required to ensure effective management of these conditions. Overall, the treatment approach for facial vascular anomalies depends on the type, size, location, and severity of the anomaly. A thorough evaluation by a team of specialists can determine the most appropriate and effective treatment plan.

"Gearing Effect in Clockwise Rotational Orthognathic Surgery".

BACKGROUND: The standard procedure for the management of skeletal class III malocclusion is maxillary advancement with mandibular setback. Occlusal plane altering orthognathic surgery, such as jaw rotation, is useful as well. Although clockwise jaw rotation is a common procedure, its mechanism has not been well-investigated. Therefore, in this study, we aim to introduce the gearing effect to correct class III malocclusion in Asians by maxillary posterior impaction via clockwise rotation without advancing the maxilla. METHODS: Patients with class III correction with clockwise rotation of the maxillomandibular complex without maxillary advancement were included, while those with genioplasty were excluded. Various facial skeletal cephalometric landmarks were measured through artificial intelligence based cephalometric analysis software. The gearing effect was determined by dividing the lower anterior facial height (LAFH) in relatively short and long groups compared to those in the ANS‒PNS length. RESULTS: In a total of 29 patients, the amount of Menton setback between group 1 (n=15, short LAFH) and group 2 (n=14, long LAFH) was 1.67±0.66 and 2.74±0.99 mm per 1 mm of PNS impaction, respectively (p=0.002), and 1.58(interquartile range(IQR) 0.78) and 1.95(IQR 1.05) mm per 1° clockwise rotation of palatal angle, respectively (p=0.007). The convexity of the A point was improved without any significant change in the SNA angle before and after surgery. CONCLUSIONS: This article addressed the scientific evidence in impact of clockwise rotational orthognathic surgery based on the gearing effect. Considering the gearing effect, the mandibular setback turned out to be more effective in patients with a long LAFH.

A Comparative Study of Titanium Cranioplasty for Extensive Calvarial Bone Defects: Three-Dimensionally Printed Titanium Implants Versus Premolded Titanium Mesh.

OBJECTIVE: This study compared the complications and symmetry outcomes between 3-dimensionally printed titanium implants and premolded titanium mesh in patients with extensive calvarial bone defects. METHODS: This retrospective analysis included patients with calvarial defects >50 cm2 undergoing cranioplasty who received either a 3-dimensionally printed titanium implant manufactured by selective laser melting techniques (N = 12) or a premolded titanium mesh customized onto a 3-dimensionally printed skull template (N = 23). Complications including intracranial infection, hardware extrusion, wound dehiscence, and cerebrospinal fluid leaks were investigated. Predictive factors affecting complications were investigated to identify the odds ratios in univariate and multivariate analyses. The symmetry was assessed by calculating the root mean square deviation, which showed the morphological deviation of the selected area compared with the mirrored image of the contralateral region. RESULTS: The overall complication rate was 26.1% (6/23 patients) in the premolded titanium group and 16.7% (2/12 patients) in the 3-dimensionally printed group. The reoperation rates did not differ significantly between the 2 groups (3-dimensionally printed group, 16.7%, versus premolded group, 21.7%). In multivariate analysis, only the number of previous cranial operation was significantly associated with the complication rate (odds ratio, 2.42; 95% confidence interval, 1.037-5.649; P = 0.041). The mean ± SD of the root mean square deviation was significantly smaller in the 3-dimensionally printed group (2.58 ± 0.93 versus 4.82 ± 1.31 mm, P < 0.001). CONCLUSIONS: The 3-dimensionally printed titanium implant manufactured by the selective laser melting technique showed comparable stability and improved symmetry outcomes compared with the conventional titanium mesh in the reconstruction of extensive calvarial defects.

Three-Dimensional Analysis of Flap Volume Change in Total Tongue Reconstruction: Focus on Reinnervated Dynamic Tongue Reconstruction.

In general, flap volume decreases over time and further in the case of a denervated muscle flap. In our institution, dynamic reconstruction, including functional muscle flaps, has been used to aid functional recovery in the past 6 years. This study aimed to determine the effect of volume change of the fat and muscular sections of reconstructed tongue flaps after motor nerve reinnervation in dynamic total tongue reconstruction using 3-dimensional measurement and analysis. A retrospective chart review was performed on 21 patients who underwent total tongue reconstruction using an anterolateral thigh free flap from 2015 to 2020. The fat and muscle volumes of the flap were measured using computed tomography data obtained before surgery (T0), 2 weeks after surgery (T1), and 6 months after surgery (T2) using a 3-dimensional rendering software. Among the 21 patients that underwent tongue reconstruction, 10 underwent dynamic reconstruction, whereas 11 underwent conventional reconstruction using a fasciocutaneous flap. T2 volume compared with T1 was 69.08% in the conventional reconstruction group, and the fat and muscle portions in the dynamic reconstruction group were 77.04% and 69.06%, respectively. No significant difference was noted in the volume change between the 2 groups. After dynamic tongue reconstruction, the muscular volume of the flap had similar volume reduction rate as the fat volume. The dynamic reconstruction was effective not only for functional muscle transfer but also for maintaining the volume of the reconstructed muscle flap.

Impact of Dynamic Tongue Reconstruction on Sequential Changes of Swallowing Function in Patients Undergoing Total or Near-Total Glossectomy.

PURPOSE: This study aimed to compare the effects of motor-innervated free flap on sequential changes of swallowing function in patients undergoing total or near-total glossectomy with laryngeal preservation. MATERIALS AND METHODS: The medical charts of 21 patients who underwent tongue reconstruction after total or near-total glossectomy between April 2015 and December 2020 were retrospectively reviewed. Patients were divided into groups by reconstruction type: conventional, reconstruction using an anterolateral thigh free flap (n = 11), and dynamic, reconstruction using an anterolateral thigh with innervated vastus lateralis flap (n = 10). Demographics, surgical details, and survival outcomes were investigated. A videofluoroscopic penetration-aspiration scale and functional outcome swallowing scale were analyzed according to postoperative time courses, classified as within 6 months, 6 to 12 months, and after 12 months postoperative. A time-to-event analysis was performed for gastrostomy tube status. RESULTS: The dynamic group showed improved swallowing outcomes at 6 to 12 months postoperative (dynamic vs conventional group, penetration-aspiration scale: 3 ± 1.51 vs 6 ± 1.63, P = 0.024; functional outcome swallowing scale: 1.89 ± 1.36 vs 4 ± 1.41, P = 0.009). In the multivariate analysis, the dynamic group showed a decreased probability of decompensated swallowing function at 6 to 12 months postoperative (odds ratio, 0.062; 95% confidence interval, 0.004-1.084; P = 0.057). A time-to-event analysis revealed no significant difference in gastrostomy tube status between the dynamic and the conventional group. CONCLUSIONS: Considering higher mortality in patients subjected to total or near-total glossectomy, dynamic reconstruction with motor-innervated free flap is worth to perform in terms of enhancing the swallowing function within 1-year postoperative period, thereby improving the quality of life.

Differences in the stability of the lesser and greater maxillary segments after cleft orthognathic surgery: A retrospective study using 3D analysis.

The aim of this study was to determine whether significant differences in postoperative stability exist between the lesser and the greater maxillary segments after cleft orthognathic surgery in patients with and without residual alveolar cleft. A retrospective study of orthognathic patients with unilateral cleft was conducted. The patients were divided into two groups according to maxillary status before surgery, with group 1 comprising single-piece maxilla and group 2 comprising two-piece maxilla. Four maxillary points were used for intra- and intergroup comparisons of movements and relapses between the two maxillary segments. In total, 24 patients were included. The intragroup comparison showed significant differences in vertical relapses between lesser and greater segments in both group 1 (anterior, p = 0.004 and posterior, p = 0.01) and group 2 (posterior, p = 0.013). With regard to intergroup comparison, the lesser segments in the two groups differed in transverse movements (anterior, p = 0.048) and relapses (posterior; p = 0.04), while the greater segments differed in transverse movements (anterior, p = 0.014 and posterior, p = 0.019), with significant differences in relapses anteriorly (vertical, p = 0.031 and sagittal, p = 0.036) and posteriorly (transverse, p = 0.022). Maxillary changes following cleft orthognathic surgery showed significant differences between the lesser and the greater segments. These findings imply that 3D images should be used to assess each maxillary segment separately with regard to planning and outcome evaluation.

Clinical investigation of botulinum toxin (prabotulinumtoxin A) for bruxism related to masseter muscle hypertrophy: A prospective study.

This study aims to confirm the effectiveness and safety of a prabotulinumtoxin type A (praBTX-A) injection in patients with bruxism and masseter hypertrophy. The study included patients who ground or clenched their teeth while sleeping and had computed tomography (CT) scans that showed a maximum thickness of the masseter muscle of 15 mm or more. The praBTX-A was administered bilaterally into the masseter muscles; 15 U/side for group 1, 25 U/side for group 2, and 35 U/side for group 3. CT scans and bruxism questionnaires were conducted before and eight weeks after the injection. Thirty-seven patients were enrolled, but three dropped out due to loss of follow-up. After injection, masseter thickness decreased to 15.1 ± 2.0 mm for group 1, 14.3 ± 2.9 mm for group 2, and 13.4 ± 1.8 mm for group 3 (p = 0.043). Group 3 showed a statistically significant lower masseter thickness compared to group 1 (p = 0.039). Both subjective and objective frequencies of bruxism decreased for all groups, but there were no significant differences in either subjective (p = 0.396) or objective frequencies (p = 0.87) between the groups after the injection. The results of this study suggest that praBTX-A injection is a safe and effective treatment for bruxism and masseter hypertrophy. A dosage of 35 IU/side can effectively decrease masseter thickness and relieve bruxism symptoms. Even the minimum dosage of 15 IU/side can contribute to improvements in bruxism symptoms. This investigation provides valuable information for managing bruxism that is associated with hypertrophic masseter muscles.