Atomic-Scale Mechanisms of Defect-Induced Retention Failure in Ferroelectrics.

The ability to switch the ferroelectric polarization using an electric field makes ferroelectrics attractive for application in nanodevices such as high-density memories. One of the major challenges impeding this application, however, has been known as "retention failure", which is a spontaneous process of polarization back-switching that can lead to data loss. This process is generally thought to be caused by the domain instability arising from interface boundary conditions and countered by defects, which can pin the domain wall and impede the back-switching. Here, using in situ transmission electron microscopy and atomic-scale scanning transmission electron microscopy, we show that the polarization retention failure can be induced by commonly observed nanoscale impurity defects in BiFeO3 thin films. The interaction between polarization and the defects can also lead to the stabilization of novel functional nanodomains with mixed-phase structures and head-to-head polarization configurations. Thus, defect engineering provides a new route for tuning properties of ferroelectric nanosystems.

Direct Observation of Defect Range and Evolution in Ion-Irradiated Single Crystalline Ni and Ni Binary Alloys.

Energetic ions have been widely used to evaluate the irradiation tolerance of structural materials for nuclear power applications and to modify material properties. It is important to understand the defect production, annihilation and migration mechanisms during and after collision cascades. In this study, single crystalline pure nickel metal and single-phase concentrated solid solution alloys of 50%Ni50%Co (NiCo) and 50%Ni50%Fe (NiFe) without apparent preexisting defect sinks were employed to study defect dynamics under ion irradiation. Both cross-sectional transmission electron microscopy characterization (TEM) and Rutherford backscattering spectrometry channeling (RBS-C) spectra show that the range of radiation-induced defect clusters far exceed the theoretically predicted depth in all materials after high-dose irradiation. Defects in nickel migrate faster than in NiCo and NiFe. Both vacancy-type stacking fault tetrahedra (SFT) and interstitial loops coexist in the same region, which is consistent with molecular dynamics simulations. Kinetic activation relaxation technique (k-ART) simulations for nickel showed that small vacancy clusters, such as di-vacancies and tri-vacancies, created by collision cascades are highly mobile, even at room temperature. The slower migration of defects in the alloy along with more localized energy dissipation of the displacement cascade may lead to enhanced radiation tolerance.

Epitaxial Growth of Intermetallic MnPt Films on Oxides and Large Exchange Bias.

High-quality epitaxial growth of inter-metallic MnPt films on oxides is achieved, with potential for multiferroic heterostructure applications. Antisite-stabilized spin-flipping induces ferromagnetism in MnPt films, although it is robustly antiferromagnetic in bulk. Moreover, highly ordered antiferromagnetic MnPt films exhibit superiorly large exchange coupling with a ferromagnetic layer.

Understanding Strain-Induced Phase Transformations in BiFeO3 Thin Films.

Experiments demonstrate that under large epitaxial strain a coexisting striped phase emerges in BiFeO3 thin films, which comprises a tetragonal-like (T') and an intermediate S' polymorph. It exhibits a relatively large piezoelectric response when switching between the coexisting phase and a uniform T' phase. This strain-induced phase transformation is investigated through a synergistic combination of first-principles theory and experiments. The results show that the S' phase is energetically very close to the T' phase, but is structurally similar to the bulk rhombohedral (R) phase. By fully characterizing the intermediate S' polymorph, it is demonstrated that the flat energy landscape resulting in the absence of an energy barrier between the T' and S' phases fosters the above-mentioned reversible phase transformation. This ability to readily transform between the S' and T' polymorphs, which have very different octahedral rotation patterns and c/a ratios, is crucial to the enhanced piezoelectricity in strained BiFeO3 films. Additionally, a blueshift in the band gap when moving from R to S' to T' is observed. These results emphasize the importance of strain engineering for tuning electromechanical responses or, creating unique energy harvesting photonic structures, in oxide thin film architectures.

Anomalous Interface and Surface Strontium Segregation in (La1-ySry)2CoO4±Î´/La1-xSrxCoO3-δ Heterostructured Thin Films.

Heterostructured oxides have shown unusual electrochemical properties including enhanced catalytic activity, ion transport, and stability. In particular, it has been shown recently that the activity of oxygen electrocatalysis on the Ruddlesden-Popper/perovskite (La1-ySry)2CoO4±Î´/La1-xSrxCoO3-δ heterostructure is remarkably enhanced relative to the Ruddlesden-Popper and perovskite constituents. Here we report the first atomic-scale structure and composition of (La1-ySry)2CoO4±Î´/La1-xSrxCoO3-δ grown on SrTiO3. We observe anomalous strontium segregation from the perovskite to the interface and the Ruddlesden-Popper phase using direct X-ray methods as well as with ab initio calculations. Such Sr segregation occurred during the film growth, and no significant changes were found upon subsequent annealing in O2. Our findings provide insights into the design of highly active catalysts for oxygen electrocatalysis.

Spatially resolved mapping of oxygen reduction/evolution reaction on solid-oxide fuel cell cathodes with sub-10 nm resolution.

Spatial localization of the oxygen reduction/evolution reactions on lanthanum strontium cobaltite (LSCO) surfaces with perovskite and layered perovskite structures is studied at the sub-10 nm level. Comparison between electrochemical strain microscopy (ESM) and structural imaging by scanning transmission electron microscopy (STEM) suggests that small-angle grain boundaries act as regions with enhanced electrochemical activity. The ESM activity is compared across a family of LSCO samples, demonstrating excellent agreement with macroscopic behaviors. This study potentially paves the way for deciphering the mechanisms of electrochemical activity of solids on the level of single extended structural defects such as grain boundaries and dislocations.

Tuning the Spin State in LaCoO3 Thin Films for Enhanced High-Temperature Oxygen Electrocatalysis.

The slow kinetics of oxygen surface exchange hinders the efficiency of high-temperature oxygen electrocatalytic devices such as solid oxide fuel cells and oxygen separation membranes. Systematic investigations of material properties that link to catalytic activity can aid in the rational design of highly active cathode materials. Here, we explore LaCoO3 thin films as a model system for tuning catalytic activity through strain-induced changes in the Co spin state. We demonstrate that Raman spectroscopy can be used to probe the Co-O bond strength at different temperatures to determine the relative spin occupancies of LaCoO3. We find that strain can be used to reduce the spin transition temperature and promote the occupation of higher spin states that weaken the Co-O bond. The decrease in Co-O bond strength and increased spin moment of the thin films result in significant enhancements of the oxygen surface exchange kinetics by up to 2 orders of magnitude.

Room-temperature multiferroic hexagonal LuFeO3 films.

The crystal and magnetic structures of single-crystalline hexagonal LuFeO(3) films have been studied using x-ray, electron, and neutron diffraction methods. The polar structure of these films are found to persist up to 1050 K; and the switchability of the polar behavior is observed at room temperature, indicating ferroelectricity. An antiferromagnetic order was shown to occur below 440 K, followed by a spin reorientation resulting in a weak ferromagnetic order below 130 K. This observation of coexisting multiple ferroic orders demonstrates that hexagonal LuFeO(3) films are room-temperature multiferroics.

In Situ Studies of the Temperature-Dependent Surface Structure and Chemistry of Single-Crystalline (001)-Oriented La0.8Sr0.2CoO3-δ Perovskite Thin Films.

Perovskites are used to promote the kinetics of oxygen electrocatalysis in solid oxide fuel cells and oxygen permeation membranes. Little is known about the surface structure and chemistry of perovskites at high temperatures and partial oxygen pressures. Combining in situ X-ray reflectivity (XRR) and in situ ambient pressure X-ray photoelectron spectroscopy (APXPS), we report, for the first time, the evolution of the surface structure and chemistry of (001)-oriented perovskite La0.8Sr0.2CoO3-δ (LSC113) and (La0.5Sr0.5)2CoO4+δ (LSC214)-decorated LSC113 (LSC113/214) thin films as a function of temperature. Heating the (001)-oriented LSC113 surface leads to the formation of surface LSC214-like particles, which is further confirmed by ex situ Auger electron spectroscopy (AES). In contrast, the LSC113/214 surface, with activities much higher than that of LSC113, is stable upon heating. Combined in situ XRR and APXPS measurements support that Sr enrichment may occur at the LSC113 and LSC214 interface, which can be responsible for its markedly enhanced activities.

Probing oxygen vacancy concentration and homogeneity in solid-oxide fuel-cell cathode materials on the subunit-cell level.

Oxygen vacancy distributions and dynamics directly control the operation of solid-oxide fuel cells and are intrinsically coupled with magnetic, electronic and transport properties of oxides. For understanding the atomistic mechanisms involved during operation of the cell it is highly desirable to know the distribution of vacancies on the unit-cell scale. Here, we develop an approach for direct mapping of oxygen vacancy concentrations based on local lattice parameter measurements by scanning transmission electron microscopy. The concept of chemical expansivity is demonstrated to be applicable on the subunit-cell level: local stoichiometry variations produce local lattice expansion that can be quantified. This approach was successfully applied to lanthanum strontium cobaltite thin films epitaxially grown on substrates of different symmetry, where polarized neutron reflectometry revealed a strong difference in magnetic properties. The different vacancy content found in the two films suggests the change in oxygen chemical potential as a source of distinct magnetic properties, opening pathways for structural tuning of the vacancy concentrations and their gradients.

Dielectric-constant-enhanced hall mobility in complex oxides.

The high dielectric constant of doped ferroelectric KTa(1-x)Nb(x)O(3) is shown to increase dielectric screening of electron scatterers, and thus to enhance the electronic mobility, overcoming one of the key limitations in the application of functional oxides. These observations are based on transport and optical measurements as well as band structure calculations.

Dynamics of step bunching in heteroepitaxial growth on vicinal substrates.

When a heteroepitaxial film is grown on a vicinal substrate, the terrace steps at the growth front may bunch together to relieve strain, resulting in a rough surface. On the other hand, proper manipulation of the growth kinetics may suppress the inherent bunching instability, thus preserving step-flow growth. Here we show that the step dynamics in the early stages of growth can already determine whether the bunching instability is truly suppressed, prior to bunching actually taking place in the unstable regime. We determine the critical film thickness above which steps will bunch and exploit its scaling properties and usefulness for extracting intrinsic energy parameters. Experimental studies of SrRuO(3) films grown on vicinal SrTiO(3) substrates clearly establish the existence of the critical film thickness in step bunching.

Suppressed dependence of polarization on epitaxial strain in highly polar ferroelectrics.

A combined experimental and computational investigation of coupling between polarization and epitaxial strain in highly polar ferroelectric PbZr(0.2)Ti(0.8)O3 (PZT) thin films is reported. A comparison of the properties of relaxed (tetragonality c/a approximately 1.05) and highly strained (c/a approximately 1.09) epitaxial films shows that polarization, while being amongst the highest reported for PZT or PbTiO3 in either film or bulk forms P(r) approximately 82 microC/cm(2)), is almost independent of the epitaxial strain. We attribute this behavior to a suppressed sensitivity of the A-site cations to epitaxial strain in these Pb-based perovskites, where the ferroelectric displacements are already large, contrary to the case of less polar perovskites, such as BaTiO3. In the latter case, the A-site cation (Ba) and equatorial oxygen displacements can lead to substantial polarization increases.

Direct experimental evidence for atomic tunneling of europium in crystalline Eu8Ga16Ge30.

Mössbauer-effect and microwave absorption experimental evidence unambiguously demonstrates the presence of slow, approximately 450 MHz, tunneling of magnetic europium between four equivalent sites in Eu8Ga16Ge30, a stoichiometric clathrate. Remarkably, six of the eight europium atoms, or 11% of the constituents in this solid, tunnel between these four sites separated by 0.55 A. The off centering of the atoms or ions in crystalline clathrates appears to be a promising route for producing Rabi oscillators in solid-state materials.

Persistent step-flow growth of strained films on vicinal substrates.

We propose a model of persistent step flow, emphasizing dominant kinetic processes and strain effects. Within this model, we construct a morphological phase diagram, delineating a regime of step flow from regimes of step bunching and island formation. In particular, we predict the existence of concurrent step bunching and island formation, a new growth mode that competes with step flow for phase space, and show that the deposition flux and temperature must be chosen within a window in order to achieve persistent step flow. The model rationalizes the diverse growth modes observed in pulsed laser deposition of SrRuO3 on SrTiO3.

Strong polarization enhancement in asymmetric three-component ferroelectric superlattices.

Theoretical predictions--motivated by recent advances in epitaxial engineering--indicate a wealth of complex behaviour arising in superlattices of perovskite-type metal oxides. These include the enhancement of polarization by strain and the possibility of asymmetric properties in three-component superlattices. Here we fabricate superlattices consisting of barium titanate (BaTiO3), strontium titanate (SrTiO3) and calcium titanate (CaTiO3) with atomic-scale control by high-pressure pulsed laser deposition on conducting, atomically flat strontium ruthenate (SrRuO3) layers. The strain in BaTiO3 layers is fully maintained as long as the BaTiO3 thickness does not exceed the combined thicknesses of the CaTiO3 and SrTiO3 layers. By preserving full strain and combining heterointerfacial couplings, we find an overall 50% enhancement of the superlattice global polarization with respect to similarly grown pure BaTiO3, despite the fact that half the layers in the superlattice are nominally non-ferroelectric. We further show that even superlattices containing only single-unit-cell layers of BaTiO3 in a paraelectric matrix remain ferroelectric. Our data reveal that the specific interface structure and local asymmetries play an unexpected role in the polarization enhancement.

Far-infrared optical conductivity gap in superconducting MgB2 films.

We report the first study of the optical conductivity of MgB2 covering the range of its lowest-energy superconducting gap. Terahertz time-domain spectroscopy is utilized to determine the complex, frequency-dependent conductivity sigma(omega) of thin films. The imaginary part reveals an inductive response due to the emergence of the superconducting condensate. The real part exhibits a strong depletion of oscillator strength near 5 meV resulting from the opening of a superconducting energy gap. The gap ratio of 2Delta0/k(B)TC approximately 1.9 is well below the weak-coupling value, pointing to complex behavior in this novel superconductor.