ABSTRACT
Thin-films of metal-organic frameworks (MOFs) have widespread potential applications, especially with the emergence of glass-forming MOFs, which remove the inherent issue of grain boundaries and allow coherent amorphous films to be produced. Herein, it is established that atomic layer deposition (ALD) of zinc oxide lends excellent control over the thickness and localization of resultant polycrystalline and glass zeolitic imidazole framework-62 (ZIF-62) thin-films within tubular α-alumina supports. Through the reduction of the chamber pressure and dose times during zinc oxide deposition, the resultant ZIF-62 films are reduced from 38 µm to 16 µm, while the presence of sporadic ZIF-62 (previously forming as far as 280 µm into the support) is prevented. Furthermore, the glass transformation shows a secondary reduction in film thickness from 16 to 2 µm.
ABSTRACT
The last 20 years have seen many publications investigating porous solids for gas adsorption and separation. The abundance of adsorbent materials (this work identifies 1608 materials for CO2 /N2 separation alone) provides a challenge to obtaining a comprehensive view of the field, identifying leading design strategies, and selecting materials for process modeling. In 2021, the empirical bound visualization technique was applied, analogous to the Robeson upper bound from membrane science, to alkane/alkene adsorbents. These bound visualizations reveal that adsorbent materials are limited by design trade-offs between capacity, selectivity, and heat of adsorption. The current work applies the bound visualization to adsorbents for a wider range of gas pairs, including CO2 , N2 , CH4 , H2 , Xe, O2 , and Kr. How this visual tool can identify leading materials and place new material discoveries in the context of the wider field is presented. The most promising current strategies for breaking design trade-offs are discussed, along with reproducibility of published adsorption literature, and the limitations of bound visualizations. It is hoped that this work inspires new materials that push the bounds of traditional trade-offs while also considering practical aspects critical to the use of materials on an industrial scale such as cost, stability, and sustainability.
ABSTRACT
The last 20 years has seen an explosion in the number of publications investigating porous solids for gas adsorption and separation. The combination of external drivers such as anthropogenic climate change and industrial efficiency has been coupled with discovery of new materials such as synthetic zeolites, metal-organic frameworks, covalent organic frameworks, and non-porous adsorbents. Numerous reviews catalogue these materials and their properties. However, the field lacks a unifying resource to visually compare and analyse materials properties with regard to their utility as a scientific advance and potential for industrial use. In the related field of membrane science, the 'Robeson upper bound' empirically describes the trade-off between gas permeability and selectivity and has become a ubiquitous tool for comparing membrane materials. In this article, we propose upper and lower bounds that empirically correlate the trade-offs encountered when designing adsorbent materials for gas separation, specifically: capacity, selectivity, and heat of adsorption. We apply bound visualizations to adsorbents studied for light alkene/alkane separations and highlight their use in identifying candidate materials for examination within process models and for guiding insights to the most effective materials design strategies. Furthermore, we note the limitations of upper and lower bound visualizations and provide links to a database resource for researchers to produce and download bound visualization plots. We anticipate that introducing bound visualizations to the field of adsorbents for gas separations will allow researchers to provide context for the importance of new materials discoveries, understand trade-offs in adsorbent design, and connect process engineers with candidate materials.
ABSTRACT
Non-porous small molecule adsorbents such as {[3,5-(CF3 )2 Pz]Cu}3 (where Pz=pyrazolate) are an emerging class of materials that display attractive features for ethene-ethane separation. This work examines the chemistry of fluorinated copper(I) pyrazolates {[3,5-(CF3 )2 Pz]Cu}3 and {[4-Br-3,5-(CF3 )2 Pz]Cu}3 with much larger 1-butene in both solution and solid state, and reports the isolation of rare 1-butene complexes of copper(I), {[3,5-(CF3 )2 Pz]Cu(H2 C=CHC2 H5 )}2 and {[4-Br-3,5-(CF3 )2 Pz]Cu(H2 C=CHC2 H5 )}2 and their structural, spectroscopic, and computational data. The copper-butene adduct formation in solution involves olefin-induced structural transformation of trinuclear copper(I) pyrazolates to dinuclear mixed-ligand systems. Remarkably, larger 1-butene is able to penetrate the dense solid material and to coordinate with copper(I) ions at high molar occupancy. A comparison to analogous ethene and propene complexes of copper(I) is also provided.
ABSTRACT
Purifying alkenes from alkanes requires cryogenic distillation. This consumes energy equivalent to countries of ca. 5 million people. Replacing distillation with adsorption processes would significantly increase energy efficiency. Trade-offs between kinetics, selectivity, capacity, and heat of adsorption have prevented production of an optimal adsorbent. We report adsorbents that overcome these trade-offs. [Cu-Br]3 and [Cu-H]3 are air-stable trinuclear complexes that undergo reversible solid-state inter-molecular rearrangements to produce dinuclear [Cu-Brâ (alkene)]2 and [Cu-Hâ (alkene)]2 . The reversible solid-state rearrangement, confirmed in situ using powder X-ray diffraction, allows adsorbent design trade-offs to be overcome, coupling low heat of adsorption (-10 to -17â kJ mol-1alkene ), high alkene:alkane selectivity (47; 29), and uptake capacity (>2.5â molalkene mol-1Cu3 ). Most remarkably, [Cu-H]3 displays fast uptake and regenerates capacity within 10â minutes.
ABSTRACT
Elemental sulfur was formed into poly(ether sulfone)-supported thin-films (ca. 10 µm) via a melt-casting process. Observed permeabilities of C2H4, CO2, H2, He, and N2 through the sulphur thin-films were <1 barrer. The sulfur thin-films were observed to age over a period of ca. 15 days, related to the reversion of polymerized sulfur to the S8 allotrope. This structural conversion was observed to correlate with an increase in the permeability of all gases.
ABSTRACT
Creating well-defined single-crystal textures in materials requires the biaxial alignment of all grains into desired orientations, which is challenging to achieve in soft materials. Here we report the formation of single crystals with rigorously controlled texture over macroscopic areas (>1 cm2) in a soft mesophase of a columnar discotic liquid crystal. We use two modes of directed self-assembly, physical confinement and magnetic fields, to achieve control of the orientations of the columnar axes and the hexagonal lattice along orthogonal directions. Field control of the lattice orientation emerges in a low-temperature phase of tilted discogens that breaks the field degeneracy around the columnar axis present in non-tilted states. Conversely, column orientation is controlled by physical confinement and the resulting imposition of homeotropic anchoring at bounding surfaces. These results extend our understanding of molecular organization in tilted systems and may enable the development of a range of new materials for distinct applications.
ABSTRACT
Catalytic electrodes were prepared via carbonization of MIL-53(Fe) on the surface of porous carbon felt electrodes (CF) for use in wastewater treatment by the heterogeneous electro-Fenton (EF) process. The best results were obtained when the carbon felt was pretreated with nitric acid, enhancing the affinity of the MIL-53(Fe) for the surface. Following a series of optimization experiments, carbonization conditions of 800 °C for 5 h were used to form Fe-nanoporous carbon (MOFs@CF). The as-prepared electrodes were used as both cathode and heterogeneous catalyst in the EF process for the mineralization of exemplar dye Acid Orange 7 (AO7). Total organic carbon (TOC) removal of 46.1% was obtained within 8 h of electrolysis at around neutral pH (6.5) and the electrode retained over 80% of its original efficiency over five treatment cycles.
ABSTRACT
The trinuclear copper(I) pyrazolate complex [Cu3 ] rearranges to the dinuclear analogue [Cu2 â (C2 H4 )2 ] when exposed to ethylene gas. Remarkably, the [Cu3 ]â[Cu2 â (C2 H4 )2 ] rearrangement occurs reversibly in the solid state. Furthermore, this transformation emulates solution chemistry. The bond-making and breaking processes associated with the rearrangement in the solid-state result in an observed heat of adsorption (-13±1â kJ mol-1 per Cu-C2 H4 interaction) significantly lower than other Cu-C2 H4 interactions (≥-24â kJ mol-1 ). The low overall heat of adsorption, "step" isotherms, high ethylene capacity (2.76â mmol g-1 ; 7.6â wt % at 293â K), and high ethylene/ethane selectivity (136:1 at 293â K) make [Cu3 ] an interesting basis for the rational design of materials for low-energy ethylene/ethane separations.
ABSTRACT
Ionic liquid (IL)-based ion-gel membranes were prepared from a curable poly(IL)-based materials platform with the free ILs 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]), bis(fluorosulfonyl)imide ([EMIM][FSI]), 1-butylimidazolium bis(trifluoromethylsulfonyl)imide ([C4 IMH][TFSI]), and ethylmethylammonium nitrate [EAN][NO3 ] and evaluated for their ionic conductivity performance at ambient and elevated temperatures. The resulting cross-linked, free-standing ion-gel membranes were found to have less than 1 wt% water (with the exception of [EAN][NO3 ] which contained ≈20 wt% water). Increasing free IL content from 50 to 80 wt% produces materials with ionic conductivity values ≥10(-2) S cm(-1) at 25 °C and ≈10(-1) S cm(-1) at 110 °C. Additionally, ion-gels containing 70 wt% of the protic ILs [C4 IMH][TFSI] and [EMIM][FSI] display ionic conductivity values of ≈10(-3) to 10(-2) S cm(-1) over the temperature range of 25-110 °C.
Subject(s)
Cross-Linking Reagents/chemistry , Imidazoles/chemistry , Ionic Liquids/chemistry , Polymers/chemistry , Cross-Linking Reagents/chemical synthesis , Electric Conductivity , Gels/chemical synthesis , Gels/chemistry , Molecular Structure , Polymers/chemical synthesis , TemperatureABSTRACT
The recycling or sequestration of carbon dioxide (CO2) from the waste gas of fossil-fuel power plants is widely acknowledged as one of the most realistic strategies for delaying or avoiding the severest environmental, economic, political, and social consequences that will result from global climate change and ocean acidification. For context, in 2013 coal and natural gas power plants accounted for roughly 31% of total U.S. CO2 emissions. Recycling or sequestering this CO2 would reduce U.S. emissions by ca. 1800 million metric tons-easily meeting the U.S.'s currently stated CO2 reduction targets of ca. 17% relative to 2005 levels by 2020. This situation is similar for many developed and developing nations, many of which officially target a 20% reduction relative to 1990 baseline levels by 2020. To make CO2 recycling or sequestration processes technologically and economically viable, the CO2 must first be separated from the rest of the waste gas mixture-which is comprised mostly of nitrogen gas and water (ca. 85%). Of the many potential separation technologies available, membrane technology is particularly attractive due to its low energy operating cost, low maintenance, smaller equipment footprint, and relatively facile retrofit integration with existing power plant designs. From a techno-economic standpoint, the separation of CO2 from flue gas requires membranes that can process extremely high amounts of CO2 over a short time period, a property defined as the membrane "permeance". In contrast, the membrane's CO2/N2 selectivity has only a minor effect on the overall cost of some separation processes once a threshold permeability selectivity of ca. 20 is reached. Given the above criteria, the critical properties when developing membrane materials for postcombustion CO2 separation are CO2 permeability (i.e., the rate of CO2 transport normalized to the material thickness), a reasonable CO2/N2 selectivity (≥20), and the ability to be processed into defect-free thin-films (ca. 100-nm-thick active layer). Traditional polymeric membrane materials are limited by a trade-off between permeability and selectivity empirically described by the "Robeson upper bound"-placing the desired membrane properties beyond reach. Therefore, the investigation of advanced and composite materials that can overcome the limitations of traditional polymeric materials is the focus of significant academic and industrial research. In particular, there has been substantial work on ionic-liquid (IL)-based materials due to their gas transport properties. This review provides an overview of our collaborative work on developing poly(ionic liquid)/ionic liquid (PIL/IL) ion-gel membrane technology. We detail developmental work on the preparation of PIL/IL composites and describe how this chemical technology was adapted to allow the roll-to-roll processing and preparation of membranes with defect-free active layers ca. 100 nm thick, CO2 permeances of over 6000 GPU, and CO2/N2 selectivity of ≥20-properties with the potential to reduce the cost of CO2 removal from coal-fired power plant flue gas to ca. $15 per ton of CO2 captured. Additionally, we examine the materials developments that have produced advanced PIL/IL composite membranes. These advancements include cross-linked PIL/IL blends, step-growth PIL/IL networks with facilitated transport groups, and PIL/IL composites with microporous additives for CO2/CH4 separations.
ABSTRACT
Membrane separations are critically important in areas ranging from health care and analytical chemistry to bioprocessing and water purification. An ideal nanoporous membrane would consist of a thin film with physically continuous and vertically aligned nanopores and would display a narrow distribution of pore sizes. However, the current state of the art departs considerably from this ideal and is beset by intrinsic trade-offs between permeability and selectivity. We demonstrate an effective and scalable method to fabricate polymer films with ideal membrane morphologies consisting of submicron thickness films with physically continuous and vertically aligned 1 nm pores. The approach is based on soft confinement to control the orientation of a cross-linkable mesophase in which the pores are produced by self-assembly. The scalability, exceptional ease of fabrication, and potential to create a new class of nanofiltration membranes stand out as compelling aspects.
ABSTRACT
Following removal of coordinated CH3 CN, the resulting complexes [Ag(I) (2,2'-bipyridine)][BF4 ] (1) and [Ag(I) (6,6'-dimethyl-2,2'-bipyridine)][OTf] (2) show ethene/ethane sorption selectivities of 390 and 340, respectively, and corresponding ethene sorption capacities of 2.38 and 2.18â mmol g(-1) when tested at an applied gas pressure of 90â kPa and a temperature of (20±1) °C. These ethene/ethane selectivities are 13 times higher than those reported for known solid sorbents for ethene/ethane separation. For 2, ethene sorption reached 90 % of equilibrium capacity within 15â minutes, and this equilibrium capacity was maintained over the three sorption/desorption cycles tested. The rates of ethene sorption were also measured. To our knowledge, these are the first complexes, designed for olefin/paraffin separations, which have open silver(I) sites. The high selectivities arise from these open silver(I) sites and the relatively low molecular surface areas of the complexes.
ABSTRACT
The synthesis of the symmetric pyrazine imide ligand, N-(2-pyrazylcarbonyl)-2-pyrazinecarboxamide, (Hdpzca) and five new first row transition metal complexes of it are reported: [M(II)(dpzca)(2)], M(II) = Fe, Cu, Zn; [Cu(II)(dpzca)(H(2)O)(2)]BF(4), [Cu(II)(dpzca)(H(2)O)(3)](2)SiF(6). The crystal structures of Hdpzca, [Co(II)(dpzca)(2)], [Cu(II)(dpzca)(2)], {[Co(III)(dpzca)(2)](BF(4))}(2)·5CH(3)CN and [Cu(II)(dpzca)(H(2)O)(3))](2)SiF(6)·2H(2)O were determined and reveal an orthogonal positioning of the 'spare' pyrazine nitrogen atoms and 'spare' pairs of imide oxygen atoms. The [M(II)(dpzca)(2)] complexes are therefore useful six-coordinate building blocks for producing larger supramolecular assemblies. Two examples of secondary assembly of [M(II)(dpzca)(2)] complexes, with M = Co and Ni, with silver nitrate gave single crystals; {[Co(III)(dpzca)(2)Ag](NO(3))(2)·2H(2)O}n and {([Ni(II)(dpzca)(2)Ag(I)(1/2)](1/2NO(3))(xH(2)O}n were structurally characterised. The redox processes of [M(II)(dpzca)(2)], with M(II) = Fe, Ni, Cu and Zn, are reported and, as seen for M(II) = Co, reversible metal- and ligand-based redox processes are observed, with E(m)(M(II)/M(III)) values 0.15-0.24 V higher than for the analogous complexes of Hpypzca (non-symmetric pyridine/pyrazine imide ligand), and 0.35-0.36 V higher than for the complexes of Hbpca (symmetric pyridine imide ligand).
Subject(s)
Organometallic Compounds/chemistry , Pyrazines/chemistry , Transition Elements/chemistry , Ligands , Models, Molecular , Molecular Structure , Organometallic Compounds/chemical synthesis , Oxidation-Reduction , Pyrazines/chemical synthesisABSTRACT
There is long-standing interest in developing membranes possessing uniform pores with dimensions in the range of 1 nm and physical continuity in the macroscopic transport direction to meet the needs of challenging small molecule and ionic separations. Here we report facile, scalabe fabrication of polymer membranes with vertically (i.e., along the through-plane direction) aligned 1 nm pores by magnetic-field alignment and subsequent cross-linking of a liquid crystalline mesophase. We utilize a wedge-shaped amphiphilic species as the building block of a thermotropic columnar mesophase with 1 nm ionic nanochannels, and leverage the magnetic anisotropy of the amphiphile to control the alignment of these pores with a magnetic field. In situ X-ray scattering and subsequent optical microscopy reveal the formation of highly ordered nanostructured mesophases and cross-linked polymer films with orientational order parameters of ca. 0.95. High-resolution transmission electron microscopy (TEM) imaging provides direct visualization of long-range persistence of vertically aligned, hexagonally packed nanopores in unprecedented detail, demonstrating high-fidelity retention of structure and alignment after photo-cross-linking. Ionic conductivity measurements on the aligned membranes show a remarkable 85-fold enhancement of conductivity over nonaligned samples. These results provide a path to achieving the large area control of morphology and related enhancement of properties required for high-performance membranes and other applications.
ABSTRACT
Activation of the secondary assembly instructions in the mononuclear pyrazine imide complexes [Co(III)(dpzca)2](BF4) or [Co(II)(dpzca)2] and [Ni(II)(dpzca)2] has facilitated the construction of two robust nanoporous three-dimensional coordination polymers, [Co(III)(dpzca)2Ag](BF4)2·2(H2O) [1·2(H2O)] and [Ni(II)(dpzca)2Ag]BF4·0.5(acetone) [2·0.5(acetone)]. Despite the difference in charge distribution and anion loading, the framework structures of 1·2(H2O) and 2·0.5(acetone) are isostructural. One dimensional channels along the b-axis permeate the structures and contain the tetrafluoroborate counterions (the Co(III)-based MOF has twice as many BF4(-) anions as the Ni(II)-based MOF) and guest solvent molecules. These anions are not readily exchanged whereas the solvent molecules can be reversibly removed and replaced. The H2, N2, CO2, CH4, H2O, CH3OH, and CH3CN sorption behaviors of the evacuated frameworks 1 and 2 at 298 K have been studied, and modeled, and both show very high selectivity for CO2 over N2. The increased anion loading in the channels of Co(III)-based MOF 1 relative to Ni(II)-based MOF 2 results in increased selectivity for CO2 over N2 but a decrease in the sorption kinetics and storage capacity of the framework.
ABSTRACT
A metal-containing ionic liquid (MCIL) has been prepared in which the [Co(II)(salicylate)2](2-) anion is able to selectively coordinate two water molecules with a visible colour change, even in the presence of alcohols. Upon moderate heating or placement in vacuo, the hydrated MCIL undergoes reversible thermochromism by releasing the bound water molecules.
Subject(s)
Cobalt/chemistry , Coordination Complexes/chemistry , Ionic Liquids/chemistry , Salicylates/chemistry , Water/chemistry , Models, Molecular , Molecular Structure , TemperatureABSTRACT
We report a non-porous silver(i) coordinated phenanthroline-based polymer, which exhibits a high ideal ethylene/ethane adsorption selectivity (15/1) and high ethylene uptake (5.0 mmol g(-1)) at ambient temperature and pressure. Both silver(i) coordination and polymer structures are important for the high uptake of ethylene.
ABSTRACT
The non-symmetric imide ligand Hpypzca (N-(2-pyrazylcarbonyl)-2-pyridinecarboxamide) has been deliberately synthesised and used to produce nine first row transition metal complexes: [M(II)(pypzca)(2)], M = Zn, Cu, Ni, Co, Fe; [M(III)(pypzca)(2)]Y, M = Co and Y = BF(4), M = Fe and Y = ClO(4); [Cu(II)(pypzca)(H(2)O)(2)]BF(4), [Mn(II)(pypzca)(Cl)(2)]HNEt(3). These are the first deliberately prepared complexes of a non-symmetric imide ligand. X-ray crystal structures of [Cu(II)(pypzca)(2)]·H(2)O, [Co(II)(pypzca)(2)], [Co(III)(pypzca)(2)]BF(4), [Cu(II)(pypzca)(H(2)O)(2)]BF(4)·H(2)O and [Mn(II)(pypzca)Cl(2)]HNEt(3) show that each of the (pypzca)(-) ligands binds in a meridional fashion via the N(3) donors. In the first three complexes, two such ligands are bound such that the 'spare' pyrazine nitrogen atoms are positioned approximately orthogonally to one another and also to the imide oxygen atoms. In MeCN the [M(II/III)(pypzca)(2)](0/+) complexes, where M = Ni, Co or Fe, exhibit one reversible metal based M(II/III) process and two distinct, quasi-reversible ligand based reduction processes, the latter also observed for M(II) = Zn. [Mn(II)(pypzca)Cl(2)]HNEt(3) displays a quasi-reversible oxidation process in MeCN, along with several irreversible processes. Both copper(II) complexes show only irreversible processes. Variable temperature magnetic measurements show that [Fe(III)(pypzca)(2)]ClO(4) undergoes a gradual spin crossover from partially high spin at 298 K (3.00 BM) to fully low spin at 2 K (1.96 BM), and that [Co(II)(pypzca)(2)] remains high spin from 298 to 4 K. All of the complexes are weakly coloured, other than [Fe(II)(pypzca)(2)] which is dark purple and absorbs strongly in the visible region.
ABSTRACT
Triply switchable [Co(II)(dpzca)(2)] shows an abrupt, reversible, and hysteretic spin crossover (T(1/2)↓ = 168 K, T(1/2)↑ = 179 K, and ΔT(1/2) = 11 K) between the high-spin (HS) and low-spin (LS) states of cobalt(II), both of which have been structurally characterized. The spin transition is also reversibly triggered by pressure changes. Moreover, in a third reversible switching mechanism for this complex, the magnetic properties can be switched between HS cobalt(II) and LS cobalt(III) by redox.