TONSL promotes lung adenocarcinoma progression, immune escape and drug sensitivity.

PURPOSE: The tonsoku-like DNA repair protein (TONSL) encoded by the TONSL gene, located on chromosome 8q24.3, is crucial for repairing DNA double-strand breaks through homologous recombination. However, TONSL overexpression in lung adenocarcinoma (LUAD) promotes tumor development, leading to a poor prognosis. METHODS: TONSL was verified as a reliable prognostic marker for LUAD using bioinformatics, and clinical features related to LUAD prognosis were screened from the TCGA database to establish the relationship between risk factors and TONSL expression. In addition, TONSL expression in normal and LUAD tissues was verified using real-time quantitative polymerase chain reaction and immunohistochemistry. To elucidate the possible functions of TONSL, TONSL-related differentially expressed genes were screened, and functional enrichment analysis was performed. Subsequently, siRNA was used to knock down TONSL expression in lung cancer cells for cytobehavioral experiments. The effects of TONSL expression on tumor immune escape were analyzed using the ESTIMATE algorithm and tumor immune-infiltration analysis. In addition, the half-maximal inhibitory concentration of LUAD with varying TONSL expression levels in response to first-line chemotherapeutic drugs and epidermal growth factor receptor-tyrosine kinase inhibitors was analyzed for drug sensitivity. RESULTS: Up-regulation of TONSL in LUAD promotes the proliferation, migration, and invasion of lung cancer cells, thereby contributing to a poor prognosis. Furthermore, TONSL overexpression promotes immune escape and drug sensitivity in LUAD. CONCLUSION: TONSL serves as a reliable prognostic marker for LUAD, and its up-regulation is associated with increased immune escape and drug sensitivity. These findings suggest that TONSL holds potential as a novel therapeutic target for LUAD.

Defactinib inhibits FAK phosphorylation and regulates psoriasis via attenuating hyperproliferation of keratinocytes.

Excessive proliferation of keratinocytes is a crucial pathological risk feature of psoriasis. Focal adhesion kinase (FAK) is a non-receptor protein that primarily regulates cell proliferation and migration. However, the expression and regulatory mechanism of FAK in psoriasis remains unclear. This study aimed to investigate the regulation of FAK in psoriasis and examined the potential impact of FAK inhibitor on psoriasis. A small molecular selective FAK inhibitor, defactinib, was used to evaluate the effect of FAK on psoriasis in in vitro and in vivo functional assays. In our experiments, imiquimod (IMQ)-induced psoriasis mice and human keratinocytes cells were used to study the potential roles and mechanisms of FAK in psoriasis. FAK phosphorylation has been weakly detected in normal intact skin and is markedly elevated upon IMQ treatment. By reducing FAK phosphorylation (p-FAK), defactinib treatment could attenuate psoriasiform inflammation and epidermal hyperplasia in IMQ-treated mice compared with IMQ-induced mice treated with the vehicle. In in vitro studies, resiquimod (R848) increased (p-FAK) and promoted cell proliferation in human keratinocytes cells, while defactinib reversed this effect. Mechanistically, defactinib can alleviate the proliferation via JNK/YB1 pathway in vitro and in vivo. Defactinib significantly attenuates psoriasiform inflammation and epidermal hyperproliferation through the inhibition of the FAK-mediated axis. The downregulation of phosphorylated FAK then suppressed the activation of JNK/YB1 protein signaling pathway in psoriasis. Our work highlights targeting FAK as a potentially effective strategy for the treatment of psoriasis.

Recombinase polymerase amplification combined with lateral flow biosensor for rapid visual detection of Clostridium perfringens in chicken meat and milk.

Aims: Clostridium perfringens is one of the major anaerobic pathogen causing food poisoning and animal enteritis. With the rise of antibiotic resistance and the restrictions of the use of antibiotic growth promoting agents (AGPs) in farming, Clostridium enteritis and food contamination have become more common. It is time-consuming and labor-intensive to confirm the detection by standard culture methods, and it is necessary to develop on-site rapid detection tools. In this study, a combination of recombinase polymerase amplification (RPA) and lateral flow biosensor (LFB) was used to visually detect C. perfringens in chicken meat and milk. Methods and results: Two sets of primers were designed for the plc gene of C. perfringens, and the amplification efficiency and specificity of the primers. Selection of primers produces an amplified fragment on which the probe is designed. The probe was combined with the lateral flow biosensor (LFB). The reaction time and temperature of RPA-LFB assay were optimized, and the sensitivity of the assay was assessed. Several common foodborne pathogens were selected to test the specificity of the established method. Chicken and milk samples were artificially inoculated with different concentrations (1 × 102 CFU/mL to 1 × 106 CFU/mL) of C. perfringens, and the detection efficiency of RPA-LFB method and PCR method was compared. RPA-LFB can be completed in 20 min and the results can be read visually by the LFB test strips. The RPA-LFB has acceptable specificity and the lowest detection limit of 100 pg./µL for nucleic acid samples. It was able to stably detect C. perfringens contamination in chicken and milk at the lowest concentration of 1 × 104 CFU/mL and 1 × 103 CFU/mL, respectively. Conclusion: In conclusion, RPA-LFB is specific and sensitive. It is a rapid, simple and easy-to-visualize method for the detection of C. perfringens in food and is suitable for use in field testing work.

Vanadium Redox Flow Battery: Review and Perspective of 3D Electrodes.

Vanadium redox flow battery (VRFB) has garnered significant attention due to its potential for facilitating the cost-effective utilization of renewable energy and large-scale power storage. However, the limited electrochemical activity of the electrode in vanadium redox reactions poses a challenge in achieving a high-performance VRFB. Consequently, there is a pressing need to assess advancements in electrodes to inspire innovative approaches for enhancing electrode structure and composition. This work categorizes three-dimensional (3D) electrodes derived from materials such as foam, biomass, and electrospun fibers. By employing a flexible electrode design and compositional functionalization, high-speed mass transfer channels and abundant active sites for vanadium redox reactions can be created. Furthermore, the incorporation of 3D electrocatalysts into the electrodes is discussed, including metal-based, carbon-based, and composite materials. The strong interaction and ordered arrangement of these nanocomposites have an influence on the uniformity and stability of the surface charge distribution, thereby enhancing the electrochemical performance of the composite electrodes. Finally, the challenges and perspectives of VRFB are explored through advancements in 3D electrodes, 3D electrocatalysts, and mechanisms. It is hoped that this review will inspire the development of methodology and concept of 3D electrodes in VRFB, so as to promote the future development of scientific energy storage and conversion technology.

Cancer-associated fibroblasts mediate resistance to anti-EGFR therapies in cancer.

Over the last decade, epidermal growth factor receptor (EGFR)-targeted therapies have transformed the treatment landscape for patients with advanced solid tumors. Despite these advances, resistance to anti-EGFR therapies is still a significant clinical challenge. While cell-autonomous mechanisms of resistance are well-documented, they do not fully elucidate the complexity of drug resistance. Cancer-associated fibroblasts (CAFs), key mediators within the tumor microenvironment (TME), have emerged as pivotal players in cancer progression and chemoresistance. Recent evidence implicates CAFs in resistance to anti-EGFR therapies, suggesting they may undermine treatment efficacy. This review synthesizes current data, highlighting the critical role of CAFs in resistance pathogenesis and summarizing recent therapeutic strategies targeting CAFs. We underscore the challenges and advocate for the exploration of CAFs as a potential dual-targeted approach.

p-d Orbital Hybridization in Ag-based Electrocatalysts for Enhanced Nitrate-to-Ammonia Conversion.

Considering the substantial role of ammonia, developing highly efficient electrocatalysts for nitrate-to-ammonia conversion has attracted increasing interest. Herein, we proposed a feasible strategy of p-d orbital hybridization via doping p-block metals in an Ag host, which drastically promotes the performance of nitrate adsorption and disassociation. Typically, a Sn-doped Ag catalyst (SnAg) delivers a maximum Faradaic efficiency (FE) of 95.5 ± 1.85 % for NH3 at -0.4 V vs. RHE and reaches the highest NH3 yield rate to 482.3 ± 14.1 mg h-1 mgcat.-1. In a flow cell, the SnAg catalyst achieves a FE of 90.2 % at an ampere-level current density of 1.1 A cm-2 with an NH3 yield of 78.6 mg h-1 cm-2, during which NH3 can be further extracted to prepare struvite as high-quality fertilizer. A mechanistic study reveals that a strong p-d orbital hybridization effect in SnAg is beneficial for nitrite deoxygenation, a rate-determining step for NH3 synthesis, which as a general principle, can be further extended to Bi- and In-doped Ag catalysts. Moreover, when integrated into a Zn-nitrate battery, such a SnAg cathode contributes to a superior energy density of 639 Wh L-1, high power density of 18.1 mW cm-2, and continuous NH3 production.

Chemical constituent characterization and determination of Quisqualis fructus based on UPLC-Q-TOF-MS and HPLC combined with fingerprint and chemometric analysis.

Quisqualis fructus (QF) is a traditional Chinese medicine (TCM) that it has a long history in the therapeutic field of killing parasites, eliminating accumulation, and stopping diarrhea. However, the therapeutic material basis of QF is remaining ambiguous nowadays. The geographical origin differences of QF are also usually ignored in the process of medication. In this study, the alcohol-aqueous soluble constituents in QF from different origins were systematically characterized and accurately measured by ultra-high performance liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UPLC-Q-TOF-MS) and high-performance liquid chromatography (HPLC) respectively. Chemometric analysis was performed for origin differentiation and screening of potential quality marker (Q-marker). Finally, A total of 106 constituents were tentatively characterized in positive and negative ion modes, including 29 fatty acids, 26 organic acids, 11 amino acids and derivatives, 10 glycosides, 9 alkaloids and derivatives, and 21 other constituents. QF from different origins were effectively distinguished and 16 constituents were selected as the potential Q-markers subsequently. Four representative components (trigonelline, adenosine, ellagic acid, and 3,3'-di-O-methylellagic acid) in QF samples were simultaneously determined. HPLC fingerprint analysis indicated that the similarity between 16 batches of QF was in the range of 0.870-0.999. The above results provide some insights for the research on the pharmacodynamic constituents, quality control, and geographical discrimination of QF.

Development of pea protein nanoparticle/hydrolyzed rice glutelin fibril emulsion gels for encapsulation of curcumin.

The potential of using emulsion gels stabilized by binary plant protein nanoparticle mixtures for the encapsulation and delivery of lipophilic nutraceuticals was evaluated. The particle characteristics, physical stability, water diffusivity, microrheology, large amplitude oscillating shear (LAOS) properties, and in vitro digestion of emulsion gels prepared by different ratios of hydrolyzed rice glutelin fibrils (HRGFs) and pea protein nanoparticle (PNP) were characterized. The emulsion gel with P/H = 2:1 (0.84 µm) exhibited the best storage stability and freeze-thaw stability, as seen by the smaller oil droplet size (1.02 and 1.42 µm, respectively). Low-field pulsed NMR indicated that the majority of water in samples was highly mobile. All the samples were predominantly elastic-like materials. The P/H 2:1 emulsion gel had the lowest FI value (6.21 × 10-4 Hz), the highest MVI value (5.57 s/nm2), G'/ G″ values and enclosed area, showing that it had denser 3D network structures, higher stiffness values, and a high sensitivity to changes in strain. Additionally, P/H 2:1 emulsion gel had a relatively high lipid digestibility (96.1 %), curcumin bioaccessibility (58.9 %), and curcumin stability (94.2 %). This study showed that emulsion gels stabilized by binary protein nanoparticle mixtures (PNP/HRGF) have potential as edible delivery systems for lipophilic nutraceuticals.

Fabrication of high internal phase emulsions (HIPEs) using pea protein isolate-hyaluronic acid-tannic acid complexes: Application of curcumin-loaded HIPEs as edible inks for 3D food printing.

Pea protein isolate (PPI)-hyaluronic acid (HA)-tannic acid (TA) ternary complexes were assembled using non-covalent interactions, their potential application in 3D printing and delivery of curcumin were investigated. As the HA-to-TA ratio in the complexes changed from 1:0 to 0:1, the oil-water interfacial tension first decreased and then increased, and the secondary structure of the proteins changed. The composition of the complexes (HA-to-TA ratio) was optimized to produce high internal phase emulsions (HIPEs) containing small uniform oil droplets with good storage and thermal stability. When the HA to TA ratio is 7:1 (P-H7-T1), HIPEs exhibited better viscosity, viscoelasticity, and thixotropy, which contributed to its preferable 3D printing. Moreover, curcumin-loaded HIPEs stabilized by P-H7-T1 showed a high lipid digestibility (≈101%) and curcumin bioaccessibility (≈79%). In summary, the PPI-HA-TA-stabilized HIPEs have good potential to be 3D-printable materials that could be loaded with bioactive components.

Carbon Structure Regulation Strategy for the Electrode of Vanadium Redox Flow Battery.

Vanadium redox flow battery (VRFB) is a type of energy storage device known for its large-scale capacity, long-term durability, and high-level safety. It serves as an effective solution to address the instability and intermittency of renewable energy sources. Carbon-based materials are widely used as VRFB electrodes due to cost-effectiveness and well-stability. However, pristine electrodes need proper modification to overcome original poor hydrophilicity and fewer reaction active sites. Adjusting the carbon structure is recognized as a viable method to boost the electrochemical activity of electrodes. This review delves into the advancements in research related to ordered and disordered carbon structure electrodes including the adjusting methods, structural characteristics, and catalytic properties. Ordered carbon structures are categorized into nanoscale and macroscale orderliness based on size, leading to improved conductivity and overall performance of the electrode. Disordered carbon structures encompass methods such as doping atoms, grafting functional groups, and creating engineered holes to enhance active sites and hydrophilicity. Based on the current research findings on carbon electrode structures, this work puts forth some promising prospects for future feasibility.

Stabilizing Zinc Anode through Ion Selection Sieving for Aqueous Zn-Ion Batteries.

Uncontrollable dendrite growth and corrosion induced by reactive water molecules and sulfate ions (SO42-) seriously hindered the practical application of aqueous zinc ion batteries (AZIBs). Here we construct artificial solid electrolyte interfaces (SEIs) realized by sodium and calcium bentonite with a layered structure anchored to anodes (NB@Zn and CB@Zn). This artificial SEI layer functioning as a protective coating to isolate activated water molecules, provides high-speed transport channels for Zn2+, and serves as an ionic sieve to repel negatively charged anions while attracting positively charged cations. The theoretical results show that the bentonite electrodes exhibit a higher binding energy for Zn2+. This demonstrates that the bentonite protective layer enhances the Zn-ion deposition kinetics. Consequently, the NB@Zn//MnO2 and CB@Zn//MnO2 full-battery capacities are 96.7 and 70.4 mAh g-1 at 2.0 A g-1 after 1000 cycles, respectively. This study aims to stabilize Zn anodes and improve the electrochemical performance of AZIBs by ion-selection sieving.

Effects of combining rTMs and augmented reality gait adaptive training on walking function of patients with stroke based on three-dimensional gait analysis and sEMG: a randomized controlled trial.

BACKGROUND: Augmented reality gait adaptive training (ARGAT) and repetitive transcranial magnetic stimulation (rTMS) have both demonstrated efficacy in improving lower limb motor function in survivors of stroke. PURPOSE: To investigate the effects of combining rTMS and ARGAT on motor function in survivors of stroke. METHODS: The experimental group received a combination of rTMS and ARGAT, while the control group received ARGAT alone. The interventions comprised a total of 20 sessions, conducted over four weeks with five consecutive daily sessions. Outcome measures included three-dimensional gait analysis (3DGA), surface electromyography (sEMG), Fugl-Meyer assessment for the lower extremity (FMA-LE), and the Berg Balance Scale (BBS). RESULTS: Following the intervention, both groups showed significant improvements in walking speed, symmetry index, affected step length, affected stride length, FMA-LE, and BBS scores (p < .05). Furthermore, the experimental group demonstrated greater improvements in walking speed (F = 4.58, p = .040), cadence (F = 5.67, p = .023), affected step length (F = 5.79, p = .022), affected stride length (F = 4.84, p = .035), FMA-LE (Z = 2.43, p = .019), and BBS (F = 4.76, p = .036) compared to the control group. The experimental group demonstrated a significant improvement in the co-contraction index (CCI) of the knee joint (F = 14.88, p < .001), a change not observed in the control group (F = 2.16, p = .151). However, neither group showed significant alterations in CCI of the ankle joint (F = 1.58, p = .218), step width (F = 0.24, p = .630), unaffected step length (F = 0.22, p = .641), or unaffected stride length (F = 2.99, p = .093). CONCLUSION: The combination of low-frequency rTMS and ARGAT demonstrated superior effects on motor function recovery compared to ARGAT alone in survivors of stroke.

The clinical, radiological, postoperative pathological, and genetic features of nodular lung adenocarcinoma: a real-world single-center data.

Background: The preoperative differential diagnosis of nodular lung adenocarcinoma has long been a challenging issue for thoracic surgeons. This study aimed to explore differential diagnosis of nodular lung adenocarcinoma by comprehensively analyzing its clinical, computed tomography (CT) imaging, and postoperative pathological and genetic features. Methods: The clinical, CT imaging, and postoperative pathological features of different classifications of nodular lung adenocarcinoma were retrospectively analyzed through univariate and multivariate statistical methods. Results: There were 132 patients with nodular lung adenocarcinoma enrolled. Firstly, compared with ground-glass nodular lung adenocarcinoma, solid nodular lung adenocarcinoma was more common in women [odds ratio (OR), 3.662; 95% confidence interval (CI): 1.066-12.577] and older adults (OR, 1.061; 95% CI: 1.007-1.119), and CT signs were mostly lobulation (OR, 4.957; 95% CI: 1.714-14.337) and spiculation (OR, 8.214; 95% CI: 2.740-24.621); the mean CT (CTm) value of solid nodular lung adenocarcinoma was significantly higher than that of ground-glass nodular lung adenocarcinoma, and the optimal diagnostic threshold was -267.5 Hounsfield units (HU). Secondly, the maximum diameter of nodule size (NSmax) of invasive adenocarcinoma (IAC) was significantly greater than that of minimally IAC (MIA; OR, 6.306; 95% CI: 1.191-33.400) or atypical adenomatous hyperplasia (AAH)/adenocarcinoma in situ (AIS; OR, 189.539; 95% CI: 4.720-7,610.476), and the optimal diagnostic threshold between IAC and MIA was 1.35 cm; the CTm value of IAC was significantly higher than that of MIA, and the optimal diagnostic threshold was -460.75 HU. Thirdly, lepidic-predominant adenocarcinoma (LPA) manifest more commonly as pure ground-glass nodule (pGGN; OR, 6.252; 95% CI: 1.429-27.358) or mixed ground-glass nodule (mGGN; OR, 4.224; 95% CI: 1.223-14.585). Moreover, the mutation rate of epidermal growth factor receptor (EGFR) in IAC was 70.69% (41/58). The EGFR mutation rates of mGGNs (OR, 8.794; 95% CI: 1.489-51.933) and solid nodules (SNs; OR, 12.912; 95% CI: 1.597-104.383) were significantly higher than that of pGGNs. Furthermore, compared with those of micropapillary-predominant adenocarcinoma (MPA), solid-predominant adenocarcinoma (SPA), or invasive mucinous adenocarcinoma (IMA), there were significantly higher EGFR mutation rates in acinar-predominant adenocarcinoma/papillary-predominant adenocarcinoma (APA/PPA; OR, 55.925; 95% CI: 4.045-773.284) and LPA (OR, 38.265; 95% CI: 2.307-634.596). Conclusions: Different classifications of nodular lung adenocarcinoma have their own clinicopathological and CT imaging features, and the latter is the main predictor.

An Optimized Microwave-Assisted Digestion Method to Analyze the Amino Acids Profile of Quisqualis Fructus from Different Planted Origins.

This study aims to establish a rapid and convenient microwave-assisted digestion method for sample pretreatment to determine amino acid profiles in natural products. This method was applied to analyze the amino acid profiles of Quisqualis Fructus (QF) from different planted origins. The microwave-assisted digestion conditions were optimized by a response surface methodology (RSM), and 17 amino acids in different planted origins of QF were determined by an automatic amino acid analyzer according to the optimized digestion conditions. The contents of 17 amino acids in QF from different planted origins were further analyzed by fingerprint and chemometric analysis. The temperature of microwave digestion at 167 °C, time of microwave digestion at 24 min, and a solid-liquid ratio of 46.5 g/mL was selected as the optimal digestion conditions. The total content of 17 amino acids in QF from different planted origins ranged from 71.88 to 91.03 mg/g. Amino acid composition and nutritional evaluation indicated that the content of medicinal amino acids was higher than aromatic amino acids. The results of fingerprint analysis reflected that the similarity between the 16 batches of QF ranged from 0.889 to 0.999, while chemometrics analysis indicated amino acid content in QF varied from different planted origins, and six important differential amino acids were screened. Compared with the traditional extraction method, microwave-assisted digestion with response surface optimized has the advantages of rapidity, convenience, and reliability, which could be used to study the amino acid profiles in natural products. The amino acid profile of QF indicated that it has a rich medicinal nutritional value. Different planted origins of QF have a high degree of similarity and could be effectively distinguished by chemometric analysis.

MIS18A upregulation promotes cell viability, migration and tumor immune evasion in lung adenocarcinoma.

Lung adenocarcinoma (LUAD) presents a significant global health challenge owing to its poor prognosis and high mortality rates. Despite its involvement in the initiation and progression of a number of cancer types, the understanding of the precise impact of MIS18 kinetochore protein A (MIS18A) on LUAD remains incomplete. In the present study, the role of MIS18A in LUAD was investigated by analyzing the genomic and clinical data from multiple public datasets. The expression of MIS18A was validated using reverse transcription-quantitative polymerase chain reaction, and in vitro experiments involving small interfering RNA-induced downregulation of MIS18A in lung cancer cells were conducted to further explore its impact. These findings revealed that elevated MIS18A expression in LUAD was associated with advanced clinical features and poor prognosis. Functional analysis also revealed the role of MIS18A in regulating the cell cycle and immune-related pathways. Moreover, MIS18A altered the immune microenvironment in LUAD, influencing its response to immunotherapy and drug sensitivity. The results of the in vitro experiments indicated that suppression of MIS18A expression reduced the proliferative and migratory capacities of LUAD cells. In summary, MIS18A possesses potential as a biomarker and may serve as a possible therapeutic target for LUAD, with significant implications for tumor progression by influencing both cell cycle dynamics and immune infiltration.

Nanocellulose/scleroglucan-enhanced robust, heat-resistant composite hydrogels for oilfield water plugging.

In an oil exploitation process, hydrogel plugging agents can effectively reduce the water-oil intermixing, decrease water extraction volume, and enhance oil recovery rate. The practical applications of traditional polyacrylamide (PAM) hydrogel plugging agents in oilfield are limited by their non-biodegradability, poor mechanical performance, and inferior temperature-resistance. This work developed a mechanically stable and high-temperature-resistant composite hydrogel (STP) by incorporating biodegradable scleroglucan (Slg) and TEMPO-oxidized cellulose nanofibers (TOCN) in the PAM hydrogel. The addition of Slg conferred heat resistance to the PAM hydrogel, while TOCN reinforced the mechanical strength. Anti-aging analyses revealed that the STP endured for 108 h in a saline environment at 140 °C. In the water flooding characterization, the STP displayed a breakthrough pressure of 42.10 psi/ft. at a flow rate of 0.75 cm3/min. Under these extreme conditions, the plugging pressure reached 14.74 psi/ft., meeting the essential criteria for oilfield water plugging. This research demonstrates the potential of polysaccharides in the preparation of sustainable, tough, and heat-resistant water plugging materials.

High-capacity K+-pillared layered manganese dioxide as cathode material for high-rate aqueous zinc-ion battery.

Sluggish kinetics and severe structural instability of manganese-based cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs) lead to low-rate capacity and poor cyclability, which hinder their practical applications. Pillaring manganese dioxide (MnO2) by pre-intercalation is an effective strategy to solve the above problems. However, increasing the pre-intercalation content to realize stable cycling of high capacity at large current densities is still challenging. Here, high-rate aqueous Zn2+ storage is realized by a high-capacity K+-pillared multi-nanochannel MnO2 cathode with 1 K per 4 Mn (δ-K0.25MnO2). The high content of the K+ pillar, in conjunction with the three-dimensional confinement effect and size effect, promotes the stability and electron transport of multi-nanochannel layered MnO2 in the ion insertion/removal process during cycling, accelerating and accommodating more Zn2+ diffusion. Multi-perspective in/ex-situ characterizations conclude that the energy storage mechanism is the Zn2+/H+ ions co-intercalating and phase transformation process. More specifically, the δ-K0.25MnO2 nanospheres cathode delivers an ultrahigh reversible capacity of 297 mAh g-1 at 1 A g-1 for 500 cycles, showing over 96 % utilization of the theoretical capacity of δ-MnO2. Even at 3 A g-1, it also delivered a 63 % utilization and 64 % capacity retention after 1000 cycles. This study introduces a highly efficient cathode material based on manganese oxide and a comprehensive analysis of its structural dynamics. These findings have the potential to improve energy storage capabilities in ZIBs significantly.

Paper substrate designed with TEMPO-oxidized cellulose nanofibers/cationic guar gum hydrogel and its application in a colorimetric biosensor for rapid bacteria detection.

The monitoring of foodborne bacterial contamination requires simple and convenient biosensors. This work describes a novel paper-based colorimetric biosensor for the rapid and sensitive bacteria detection. The biosensor was constructed via the encapsulation of D-alanyl-D-alanine capped gold nanoparticles (DADA-AuNPs) in a modified paper that was fabricated by the freeze-drying of TEMPO-oxidized cellulose nanofibers/cationic guar gum composite hydrogel-modified filter paper. The results indicated that the size of DADA-AuNPs largely determined the color of their aqueous system and they exhibited light red to dark red as their size increased from around 6 to 36 nm. All these different sized DADA-AuNPs turned into colorless when encountered with either S. aureus or E. coli. In particular, the smaller the DADA-AuNPs size, the faster the discoloration. The encapsulation of DADA-AuNPs into modified paper negligibly changed their responsiveness towards bacteria. In comparison to the original filter paper and oven-dried hydrogel-modified filter paper, the freeze-dried hydrogel-modified paper was demonstrated to be a better substrate for the encapsulation of DADA-AuNPs since they could be loaded with a larger amount of DADA-AuNPs in a faster way and showed a better perceivable color. This work demonstrated a promising paper-based colorimetric biosensor for the facile and rapid detection of bacteria.

A multifunctional protein-based hydrogel with Au nanozyme-mediated self generation of H2S for diabetic wound healing.

Diabetics usually suffer from chronic impaired wound healing due to facile infection, excessive inflammation, diabetic neuropathy, and peripheral vascular disease. Hence, the development of effective diabetic wound therapy remains a critical clinical challenge. Hydrogen sulfide (H2S) regulates inflammation, oxidative stress, and angiogenesis, suggesting a potential role in promoting diabetic wound healing. Herein, we propose a first example of fabricating an antibiotic-free antibacterial protein hydrogel with self-generation of H2S gas (H2S-Hydrogel) for diabetic wound healing by simply mixing bovine serum albumin­gold nanoclusters (BSA-AuNCs) with Bis[tetrakis(hydroxymethyl)phosphonium] sulfate (THPS) at room temperature within a few minutes. In this process, the amino group in BAS and the aldehyde group in THPS are crossed together by Mannich reaction. At the same time, tris(hydroxymethyl) phosphorus (trivalent phosphorus) from THPS hydrolysis could reduce disulfide bonds in BSA to sulfhydryl groups, and then the sulfhydryl group generates H2S gas under the catalysis of BSA-AuNCs. THPS in H2S-Hydrogel can destroy bacterial biofilms, while H2S can inhibit oxidative stress, promote proliferation and migration of epidermal/endothelial cells, increase angiogenesis, and thus significantly increase wound closure. It would open a new perspective on the development of effective diabetic wound dressing.

Cu-Mo Dual Sites in Cu-Doped MoSe2 for Enhanced Electrosynthesis of Urea.

The quest for sustainable urea production has directed attention toward electrocatalytic methods that bypass the energy-intensive traditional Haber-Bosch process. This study introduces an approach to urea synthesis through the coreduction of CO2 and NO3- using copper-doped molybdenum diselenide (Cu-MoSe2) with Cu-Mo dual sites as electrocatalysts. The electrocatalytic activity of the Cu-MoSe2 electrode is characterized by a urea yield rate of 1235 µg h-1 mgcat.-1 at -0.7 V versus the reversible hydrogen electrode and a maximum Faradaic efficiency of 23.43% at -0.6 V versus RHE. Besides, a continuous urea production with an enhanced average yield rate of 9145 µg h-1 mgcat.-1 can be achieved in a flow cell. These figures represent a substantial advancement over that of the baseline MoSe2 electrode. Density functional theory (DFT) calculations elucidate that Cu doping accelerates *NO2 deoxygenation and significantly decreases the energy barriers for C-N bond formation. Consequently, Cu-MoSe2 demonstrates a more favorable pathway for urea production, enhancing both the efficiency and feasibility of the process. This study offers valuable insights into electrode design and understanding of the facilitated electrochemical pathways.