Handling and Tagging Techniques for Implanting Juvenile American Shad with a New Acoustic Microtransmitter.

The use of telemetry techniques to better understand the behavior and survival of juvenile American shad (Alosa sapidissima), as they migrate through hydropower systems, has been challenging because shad are widely known to be particularly sensitive to handling. The goal of this study was to develop a tagging protocol using a new, acoustic micro transmitter that minimizes the detrimental effects of the tagging process and maximizes post-tagging survival of juvenile American shad. Limiting out-of-water handling and the use of brackish saltwater (7.5 parts per thousand) before and after tagging improved survival for shad tagged using a simple pectoral implantation method. This protocol provides a detailed, step-by-step procedure for tagging juvenile shad with acoustic transmitters. Fish tagged using this procedure and held in the laboratory for 60 days had an 81.5% survival rate, compared to 70% for their untagged counterparts. The successful tagging and handling practices developed in this study could be applied to field telemetry studies of juvenile shad and other sensitive species.

Balloon Tag Manufacturing Technique for Sensor Fish and Live Fish Recovery.

Fish may experience injuries and mortality when they pass through hydraulic conveyances at hydropower dams, even if these conveyances are designed to be fish-friendly, such as downstream bypass systems, modified spillways and turbines. The main methods used to study fish passage conditions in hydraulic structures involve direct, in situ testing using Sensor Fish technology and live fish. Sensor Fish data helps identify physical stressors and their locations in the fish passage environment, while live fish are assessed for injuries and mortality. Balloon tags, which are self-inflating balloons attached externally to Sensor Fish and live fish, aid in their recovery after passing through hydraulic structures. This article focuses on the development of balloon tags with varying numbers of dissolvable, vegetable-based capsules containing a mixture of oxalic acid, sodium bicarbonate powders, and water at two different temperatures. Our research determined that balloon tags with three capsules, injected with 5 mL of water at 18.3 °C, consistently achieved the desired balloon volume. These tags had a mean inflation volume of 114 cm3 with a standard deviation of 1.2 cm3. Among the balloon tags injected with water at 18.3 °C, it was observed that the two-capsule balloon tags took the longest time to reach full inflation. In addition, the four-capsule balloon tags demonstrated a faster inflation start time, while the three-capsule balloon tags demonstrated a faster deflation start time. Overall, this approach proves to be effective for validating the performance of new technologies, improving turbine design, and making operational decisions to enhance fish passage conditions. It serves as a valuable tool for research and field evaluations, aiding in the refinement of both the design and operation of hydraulic structures.

Marine energy converters: Potential acoustic effects on fishes and aquatic invertebrates.

The potential effects of underwater anthropogenic sound and substrate vibration from offshore renewable energy development on the behavior, fitness, and health of aquatic animals is a continuing concern with increased deployments and installation of these devices. Initial focus of related studies concerned offshore wind. However, over the past decade, marine energy devices, such as a tidal turbines and wave energy converters, have begun to emerge as additional, scalable renewable energy sources. Because marine energy converters (MECs) are not as well-known as other anthropogenic sources of potential disturbance, their general function and what is known about the sounds and substrate vibrations that they produce are introduced. While most previous studies focused on MECs and marine mammals, this paper considers the potential of MECs to cause acoustic disturbances affecting nearshore and tidal fishes and invertebrates. In particular, the focus is on particle motion and substrate vibration from MECs because these effects are the most likely to be detected by these animals. Finally, an analysis of major data gaps in understanding the acoustics of MECs and their potential impacts on fishes and aquatic invertebrates and recommendations for research needed over the next several years to improve understanding of these potential impacts are provided.

Survival, healing, and swim performance of juvenile migratory sea lamprey (Petromyzon marinus) implanted with a new acoustic microtransmitter designed for small eel-like fishes.

Background: Little is known about the transformer stage of the parasitic lampreys, a brief but critical period that encompasses juvenile out-migration from rivers to lakes or oceans to begin parasitic feeding. Information about this life stage could have significant conservation implications for both imperiled and invasive lampreys. We investigated tag retention, survival, wound healing, and swim performance of newly transformed sea lamprey (Petromyzon marinus) implanted with a new micro-acoustic transmitter, the eel-lamprey acoustic transmitter (ELAT), in a controlled laboratory environment. Results: The 61-day survival of our tagged subjects was 71%, within the range reported in similar studies of juvenile lampreys. However, survival was significantly lower in the tagged animals (vs control), with no effect statistically attributable to measures of animal length, mass, condition, or population of origin (Great Lakes vs. Atlantic drainage). Mortality in tagged fish was concentrated in the first four days post-surgery, suggesting injury from the surgical process. An unusually long recovery time from anesthesia may have contributed to the increased mortality. In a simple burst swim assay, tagged animals swam significantly slower (- 22.5%) than untagged animals, but were not significantly different in endurance swim tests. A composite wound healing score at day four was a significant predictor of maximum burst swim speed at day 20, and wound condition was related to animal mass, but not length, at the time of tagging. Conclusions: Impairments to survival and swim performance of juvenile sea lamprey implanted with the ELAT transmitter were within currently reported ranges for telemetry studies with small, difficult to observe fishes. Our results could be improved with more refined anesthesia and surgical techniques. The ability to track migratory movements of imperiled and pest populations of parasitic lampreys will improve our ability to estimate vital rates that underlie recruitment to the adult population (growth, survival) and to investigate the environmental factors that regulate the timing and rates of movement, in wild populations.

Survival, growth and tag retention of juvenile European eel (Anguilla anguilla L.) with implanted 12 mm passive integrated transponder tags and acoustic tags.

To evaluate the efficiency of tagging juvenile European eels with implanted 12 mm passive integrated transponder (PIT) tags or Eel/Lamprey acoustic transmitters (ELATs), the authors studied tag retention, survival and growth of eels (7-25 g). Experimental eels were obtained from an eel farm, tagged and then released in a series of shallow dug-out ponds with a surface area of c. 200 m2 . Tagged and control eels were distributed evenly, with 50 tagged and 50 control eels in each of four ponds, giving a total of 200 tagged and 200 control eels mixed. After 76 days, the ponds were drained, and eels were sampled and measured. A total of 344 eels (86%) were recaptured, indicating high survival. Tag retention was 99% as only one of the recaptured PIT-tagged eels had lost the tag and none of the ELAT tagged. The results demonstrated that tagging juvenile eels >16 cm with these small tags is indeed feasible. The growth of tagged and control fish was differentiated but generally low in length and negative in mass but did not differ between the three groups.

An innovative method for soil vapor extraction to improve extraction and tail gas treatment efficiency.

This study aims to improve soil vapor extraction (SVE) to address its shortcomings in treating halogenated hydrocarbon-contaminated soil. Indoor simulation experiments based on SVE were conducted to provide technical guidance for the remediation of 1,2-DCA-contaminated soil, with the overall intention of soil repair and ecological restoration. A thermal oxidation SVE (TOSVE) system was designed on the basis of SVE technology for application in the remediation of low-permeability soil contaminated with halogenated hydrocarbons from a chemical plant in Northeast China. Laboratory simulation experiments were conducted based on TOSVE technology to study the removal of target pollutants under different organic contents, moisture and air speeds. For the first time, a new material, scoria, was added to the oxidant at different proportions, and its effect on the exhaust gas treatment efficiency was examined. Thermal extraction improved the extraction efficiency of pollutants from low-permeability soil. Moreover, the adsorption-oxidation effect of 0.1-0.25 mm scoria prepared by 20% Na2S2O8 on 1,2-dichloroethane (1,2-DCA) in tail gas was higher than that of the oxidant without scoria, indicating that scoria is effective in tail gas treatment.

A Frequency-Programmable Miniaturized Radio Frequency Transmitter for Animal Tracking.

In animal tracking applications, smaller transmitters can reduce the impact of the transmitter on the tagged animal and thus provide more accurate data about animal behavior. By combining a novel circuit design and a newly developed micro-battery, we developed frequency-programmable and more powerful radio frequency transmitters that are about 40% smaller and lighter in weight than the smallest commercial counterpart for animal monitoring at the time of development. The new radio frequency transmitter has a miniaturized form factor for studying small animals. Designs of two coding schemes were developed: one transmits unmodulated signals (weight: 152 mg; dimensions: Ø 2.95 mm × 11.22 mm), and the other transmits modulated signals (weight: 160 mg; dimensions: Ø 2.95 mm × 11.85 mm). To accommodate different transmitter life requirements, each design can be configured to transmit in high or low signal strength. Prototypes of these transmitters were evaluated in the laboratory and exhibited comparable or longer service life and higher signal strength compared to their smallest commercial counterparts.

A large dataset of detection and submeter-accurate 3-D trajectories of juvenile Chinook salmon.

Acoustic telemetry has been used extensively to study the behavior of aquatic animals. The Juvenile Salmon Acoustic Telemetry System (JSATS) is one such system; it was developed for studying juvenile salmonids but has been used to study numerous species. A recent innovation of the JSATS system is an acoustic transmitter that is small enough to be implanted through injection or small incision that doesn't require sutures. Use of the JSATS system involves deploying cabled acoustic receivers at hydroelectric dams, or other structures, and autonomous acoustic receivers in free-flowing sections of a river. The raw detections from acoustic-tagged fish are processed to remove potential false positives. The clean detections (5,147,996 total) are used to generate detection events and to compute 3-D trajectories (403,900 total), which are used to assign fish to a passage route through a dam. Controlled field testing involving a high-accuracy Global Positioning System receiver is done to validate the submeter accuracy of the trajectories. The JSATS dataset could be reused for expanding the understanding of near-dam fish behavior.

Remediation and improvement of 2,4-dichlorophenol contaminated soil by biochar-immobilized laccase.

In this paper, laccase was immobilized with the adsorption-crosslinking method in which biochar was used as the carrier and glutaraldehyde was used as the crosslinking agent. Firstly, the optimal immobilization conditions and optimal operating conditions were investigated, and then the stability of both free laccase and immobilized laccase was compared. Finally, the 2,4-dichlorophenol contaminated soil was remedied with both free laccase and immobilized laccase, and the improvement on the remediation of the contaminated soil by immobilized laccase was analysed through the ecological evaluation. The results showed that in the optimal immobilization condition, the biochar with a particle size of 30 mesh should be selected, and glutaraldehyde with a volume fraction of 4% and 20 mL of laccase solution should be added to complete the 6-hour adsorption operation and 4-hour crosslinking operation. The stability of immobilized laccase was better than that of free laccase, and the thermal deactivation kinetic equation for the free laccase was lnA = -0.7657t + 0.4344 and the thermal deactivation kinetic equation for the immobilized laccase was lnA = -0.1048t + 0.0608, respectively. The degradation ability of immobilized laccase for 2-4 dichlorophenol was better than that of free laccase. The degradation rate of 2,4-dichlorophenol was 44.4% in the free laccase group and 64.6% in the immobilized laccase group. The ecological evaluation showed that the biochar-immobilized laccase had a positive effect on the soil ecological environment in the remediation process of the soil and can improve the remediation of the contaminated soil to some extent.

Analysis of microbial community structure and degradation of ammonia nitrogen in groundwater in cold regions.

Nitrogen pollution exceeding the standard because of intensive farming and cropping systems has been a widespread problem in Northeast China. This study investigated the characteristics of functional microorganisms in groundwater in the Bang River farming area. Metagenomic sequencing was used to analyze microbial community structures and Canoco was applied to reveal the response relationship between the microbial community and water environmental factors and to identify changes in the microbial population in response to the addition of electronic donors NH4+-N, NO2--N, and NO3--N. The results showed that the dominant microorganisms in groundwater belong to the genera Exiguobacterium, Citrobacter, Acinetobacter, and Pseudomonas, which accounted for more than 40% of the total microbes in the study area. When combined with the results of a water chemical factor test, the dominant bacteria were found to be correlated with Fe2+, Mn2+, NH4+, NO3-, NO2-, HCO3-, DOC, and pH in the water. However, the microbial population changed after the addition of the electron donor, with the genera Pseudomonas, Serratia, Enterobacter, Azomonas, and Ewingella accounting for 97.06% of the total sequences. Indigenous nitrogen-degrading bacteria suitable for low temperature, low oxygen, and oligotrophic groundwater were screened out. The total removal efficiency of NH4+-N, NO2--N, and NO3--N in 120 h was 90.83%, 75.04%, and 73.35%, respectively. According to the experimental results, the degradation reaction kinetics followed a pseudo-second-order equation. The results presented herein provide an important scientific basis for the microbial remediation of groundwater contaminated by ammonia.

Migration of heavy metals and migration-degradation of phenanthrene in soil using electro kinetic-laccase combined remediation system.

In order to solve the problem of heavy metal-organic compound soil pollution, in this paper, we developed a highly efficient electro kinetic-laccase combined remediation (EKLCR) system. The results showed that the EKLCR system had an obvious migration effect on heavy metals (copper and cadmium) and good migration-degradation effect on phenanthrene. The migration rates of copper and cadmium were 48.3% and 40.3%, respectively. Especially, with the presence of laccase, the removal rate of phenanthrene on Cu2+-contaminated soil was higher than that of Cd2+-contaminated soil due to the significant effect of heavy metals on the enzymatic activity of laccase. The average migration-degradation rate of phenanthrene by EKLCR system was 45.4%. Finally, gas chromatography-mass spectrometry (GC/MS) was used to analyze the degradation intermediates of phenanthrene in the soil, which included 9,10-Phenanthrenequinone, phthalic acid, and 2,2-Biphenyldicarboxylic Acid. In addition, we give the possible degradation pathways of phenanthrene, 2,2-Biphenyldicarboxylic Acid is further degraded to produce phthalic acid. The products of the phthalic acid metabolic pathway are protocatechuic acid, pyruvic acid or succinic acid, the final products of these organic acids are carbon dioxide and water.

Removal characteristics of a composite active medium for remediation of nitrogen-contaminated groundwater and metagenomic analysis of degrading bacteria.

To investigate the removal characteristics of ammonium-nitrogen (NH4+-N), nitrite-nitrogen (NO2--N), nitrate-nitrogen (NO3--N), and total nitrogen from groundwater by a degradable composite active medium, kinetics, thermodynamics, and equilibrium adsorption, experiments were performed using scoria and degrading bacteria immobilized on scoria. Removal of NH4+-N, NO2--N, and NO3--N was conducted in adsorption experiments using different times, initial concentrations, pH values, and groundwater chemical compositions (Ca2+, Mg2+, HCO3-, CO32-, Fe2+, Mn2+, and SO42-). The results showed that the removal of nitrogen by the composite active medium was obviously better than that of scoria alone. The removal rates of NH4+-N (C0 = 5 mg/L), NO2--N (C0 = 5 mg/L), and NO3--N (C0 = 100 mg/L) by the composite active medium within 1 h were 96.05%, 82.40%, and 83.16%, respectively. The adsorption kinetics were well fitted to a pseudo-second order model, whereas the equilibrium adsorption agreed with the Freundlich model. With changes in the pH, variation in the removal could be attributed to the combined effect of hydrolysis and competitive ion adsorption, and the optimum pH was 7. Different concentration conditions, hardness, alkalinity, anions, and cations showed different promoting and inhibiting effects on the removal of nitrogen. A careful examination of ionic concentrations in adsorption batch experiments suggested that the sorption behavior of nitrogen onto the immobilized medium was mainly controlled by ion exchange. The degrading bacteria on the scoria surface were eluted and analyzed by metagenomic sequencing. There were significant differences in the number of operational taxons, relative abundances, and community diversity among degrading bacteria after adsorption of the three forms of nitrogen. The relative abundance of degrading bacteria was highest after NO3--N removal, and the diversity was highest after NO2--N removal. Pseudomonas and Serratia were the dominant genera that could efficiently remove NH4+-N and NO2--N.

The effect of fish bodies on the source level and beam pattern of acoustic transmitters in juvenile Chinook salmon.

The effect of the fish body on the source level and beam pattern of an acoustic fish tag signal was investigated through laboratory experiments and an analytical method. In laboratory experiments, the source level and beam pattern were measured in both a tag-only group and a tag-in-fish group. In the analytical method, both forward and backward scattering were calculated by assuming the acoustic tag was a point source and the swimbladder was an air-filled prolate spheroid. The mean source level of five tested tags decreased by ∼4 dB after implantation in fish bodies, which is important for designing fish migration studies using acoustic telemetry.

Improving underwater localization accuracy with machine learning.

Machine learning classification and regression algorithms were applied to calibrate the localization errors of a time-difference-of-arrival (TDOA)-based acoustic sensor array used for tracking salmon passage through a hydroelectric dam on the Snake River, Washington, USA. The locations of stationary and mobile acoustic tags were first tracked using the approximate maximum likelihood algorithm. Next, ensembles of classification trees successfully identified and filtered data points with large localization errors. This prefiltering step allowed the creation of a machine-learned regression model function, which decreased the median distance error by 50% for the stationary tracks and by 34% for the mobile tracks. It also extended the previous range of sub-meter localization accuracy from 100 m to 250 m horizontal distance from the dam face (the receivers). Median distance errors in the depth direction were especially decreased, falling from 0.49 m to 0.04 m in the stationary tracks and from 0.38 m to 0.07 m in the mobile tracks. These methods would have application to the calibration of error in any TDOA-based sensor network with a steady environment and array configuration.

Three-dimensional migration behavior of juvenile salmonids in reservoirs and near dams.

To acquire 3-D tracking data on juvenile salmonids, Juvenile Salmon Acoustic Telemetry System (JSATS) cabled hydrophone arrays were deployed in the forebays of two dams on the Snake River and at a mid-reach reservoir between the dams. The depth distributions of fish were estimated by statistical analyses performed on large 3-D tracking data sets from ~33,500 individual acoustic tagged yearling and subyearling Chinook salmon and juvenile steelhead at the two dams in 2012 and subyearling Chinook salmon at the two dams and the mid-reach reservoir in 2013. This research investigated the correlation between vertical migration behavior and passage routes. The depth distributions of fish within the forebays of the dams were significantly different from fish passing the mid-reach reservoir. Fish residing deeper in the forebay tended to pass the dam using deeper powerhouse routes. This difference in depth distributions indicated that the depth distribution of fish at the mid-reach reservoir was not related to behaviors of fish passing through certain routes of the adjacent dams. For fish that were detected deeper than 17.5 m in the forebays, the probability of powerhouse passage (i.e., turbine) increased significantly. Another important finding was the variation in depth distributions during dam passage associated with the diel period, especially the crepuscular periods.

Research Progress towards Understanding the Unique Interfaces between Concentrated Electrolytes and Electrodes for Energy Storage Applications.

The electrolyte is an indispensable component in all electrochemical energy storage and conversion devices with batteries being a prime example. While most research efforts have been pursued on the materials side, the progress for the electrolyte is slow due to the decomposition of salts and solvents at low potentials, not to mention their complicated interactions with the electrode materials. The general properties of bulk electrolytes such as ionic conductivity, viscosity, and stability all affect the cell performance. However, for a specific electrochemical cell in which the cathode, anode, and electrolyte are optimized, it is the interface between the solid electrode and the liquid electrolyte, generally referred to as the solid electrolyte interphase (SEI), that dictates the rate of ion flow in the system. The commonly used electrolyte is within the range of 1-1.2 m based on the prior optimization experience, leaving the high concentration region insufficiently recognized. Recently, electrolytes with increased concentration (>1.0 m) have received intensive attention due to quite a few interesting discoveries in cells containing concentrated electrolytes. The formation mechanism and the nature of the SEI layers derived from concentrated electrolytes could be fundamentally distinct from those of the traditional SEI and thus enable unusual functions that cannot be realized using regular electrolytes. In this article, we provide an overview on the recent progress of high concentration electrolytes in different battery chemistries. The experimentally observed phenomena and their underlying fundamental mechanisms are discussed. New insights and perspectives are proposed to inspire more revolutionary solutions to address the interfacial challenges.

An Energy Harvesting Underwater Acoustic Transmitter for Aquatic Animals.

Acoustic telemetry is the primary method to actively track aquatic animals for behavioral studies. However, the small storage capacities of the batteries used in the transmitters limit the time that the implanted animals can be studied. In this research, we developed and implemented a battery-free acoustic transmitter that uses a flexible piezoelectric beam to harvest energy from fish swimming as the power source. The transmitter sends out a unique identification code with a sufficiently strong signal (150 dB, ref: 1 µPa at 1 meter) that has a detection range of up to 100 meters. Two prototypes, 100 mm and 77 mm long, respectively, weighing only about 1 gram or less in air, were sub-dermally implanted in two species of live fish. Transmissions were successfully detected as the fish swam in a natural manner. This represents the first known implanted energy-harvesting transmitter demonstrated in vivo. Successful development of this transmitter greatly expands the potential for long-term studies of the behaviors of aquatic animals and for subsequently developing strategies to mitigate the environmental impacts of renewable energy systems.

Contributed Review: Source-localization algorithms and applications using time of arrival and time difference of arrival measurements.

Locating the position of fixed or mobile sources (i.e., transmitters) based on measurements obtained from sensors (i.e., receivers) is an important research area that is attracting much interest. In this paper, we review several representative localization algorithms that use time of arrivals (TOAs) and time difference of arrivals (TDOAs) to achieve high signal source position estimation accuracy when a transmitter is in the line-of-sight of a receiver. Circular (TOA) and hyperbolic (TDOA) position estimation approaches both use nonlinear equations that relate the known locations of receivers and unknown locations of transmitters. Estimation of the location of transmitters using the standard nonlinear equations may not be very accurate because of receiver location errors, receiver measurement errors, and computational efficiency challenges that result in high computational burdens. Least squares and maximum likelihood based algorithms have become the most popular computational approaches to transmitter location estimation. In this paper, we summarize the computational characteristics and position estimation accuracies of various positioning algorithms. By improving methods for estimating the time-of-arrival of transmissions at receivers and transmitter location estimation algorithms, transmitter location estimation may be applied across a range of applications and technologies such as radar, sonar, the Global Positioning System, wireless sensor networks, underwater animal tracking, mobile communications, and multimedia.

How low can they go when going with the flow? Tolerance of egg and larval fishes to rapid decompression.

Egg and larval fish that drift downstream are likely to encounter river infrastructure and consequently rapid decompression, which may result in significant injury. Pressure-related injury (or barotrauma) has been shown in juvenile fishes when pressure falls sufficiently below that at which the fish has acclimated. There is a presumption that eggs and larvae may be at least as, if not more, susceptible to barotrauma injury because they are far less-developed and more fragile than juveniles, but studies to date report inconsistent results and none have considered the relationship between pressure change and barotrauma over a sufficiently broad range of pressure changes to enable tolerances to be properly determined. To address this, we exposed eggs and larvae of three physoclistic species to rapid decompression in a barometric chamber over a broad range of discrete pressure changes. Eggs, but not larvae, were unaffected by all levels of decompression tested. At exposure pressures below ∼40 kPa, or ∼40% of surface pressure, swim bladder deflation occurred in all species and internal haemorrhage was observed in one species. None of these injuries killed the fish within 24 h, but subsequent mortality cannot be excluded. Consequently, if larval drift is expected where river infrastructure is present, adopting design or operational features which maintain exposure pressures at 40% or more of the pressure to which drifting larvae are acclimated may afford greater protection for resident fishes.

Following the transient reactions in lithium-sulfur batteries using an in situ nuclear magnetic resonance technique.

A fundamental understanding of electrochemical reaction pathways is critical to improving the performance of Li-S batteries, but few techniques can be used to directly identify and quantify the reaction species during disharge/charge cycling processes in real time. Here, an in situ (7)Li NMR technique employing a specially designed cylindrical microbattery was used to probe the transient electrochemical and chemical reactions occurring during the cycling of a Li-S system. In situ NMR provides real time, semiquantitative information related to the temporal evolution of lithium polysulfide allotropes during both discharge/charge processes. This technique uniquely reveals that the polysulfide redox reactions involve charged free radicals as intermediate species that are difficult to detect in ex situ NMR studies. Additionally, it also uncovers vital information about the (7)Li chemical environments during the electrochemical and parasitic reactions on the Li metal anode. These new molecular-level insights about transient species and the associated anode failure mechanism are crucial to delineating effective strategies to accelerate the development of Li-S battery technologies.