ABSTRACT
The effect of simultaneous application of tert-butyl hydroperoxide (tBHP) and polychromatic near-infrared (NIR) radiation on bovine blood was examined to determine whether NIR light decreases the susceptibility of red blood cells (RBCs) to oxidative stress. The study assessed various exposure methods, wavelength ranges, and optical filtering types. Continuous NIR exposure revealed a biphasic response in cell-free hemoglobin changes, with antioxidative effects observed at low fluences and detrimental effects at higher fluences. Optimal exposure duration was identified between 60 s and 15 min. Protective effects were also tested across wavelengths in the range of 750-1100 nm, with all of them reducing hemolysis, notably at 750 nm, 875 nm, and 900 nm. Comparing broadband NIR and far-red light (750 nm) showed no significant difference in hemolysis reduction. Pulse-dosed NIR irradiation allowed safe increases in radiation dose, effectively limiting hemolysis at higher doses where continuous exposure was harmful. These findings highlight NIR photobiomodulation's potential in protecting RBCs from oxidative stress and will be helpful in the effective design of novel medical therapeutic devices.
Subject(s)
Erythrocytes , Hemolysis , Infrared Rays , Oxidative Stress , tert-Butylhydroperoxide , Oxidative Stress/drug effects , Oxidative Stress/radiation effects , Erythrocytes/radiation effects , Erythrocytes/metabolism , Erythrocytes/drug effects , Cattle , Animals , Hemolysis/drug effects , Hemolysis/radiation effects , tert-Butylhydroperoxide/pharmacology , Dose-Response Relationship, Radiation , Hemoglobins/metabolismABSTRACT
Essential Oils (EOs) are currently being researched as potential antibiofilm agents to combat infections related to chronic wound biofilms. As documented in the literature, EOs' in vitro antibacterial properties are often assessed using standard microbiological media and conditions that do not accurately reflect the actual environment of a chronic wound. To address this issue, In vitro Wound Milieu (IVWM) medium, which closely resembles the environment of a chronic wound, was applied for culturing S. aureus biofilms (n = 12) in this research. Biofilms cultivated in the standard Tryptic Soy Broth (TSB) medium served as a control for the experiment. Key biofilm features were analyzed and compared. Subsequently, staphylococci were exposed to the activity of thyme or rosemary EOs (T-EO and R-EO, respectively). As proof of concept, the cytotoxicity of T-EO and its antimicrobial in vivo activity were assessed using a G. mellonella larvae model. Key features of biofilm-forming cells were lower in the IVWM than in the TSB medium: biomass (up to 8 times), metabolic activity (up to 9 times), cell number (up to 100 times), and the live/dead cells ratio. Conversely, biofilm thickness was higher (up to 25%) in IVWM. These differences translated into varied responses of the biofilms to EOs exposure. The application of T-EO led to a greater reduction (up to 2 times) in 67% of biofilm-forming strains in IVWM compared to the TSB medium. Conversely, exposure to R-EO resulted in a higher reduction (up to 2.6 times) of 83% of biofilm-forming strains in TSB than in IVWM. The application of T-EO was not only non-toxic to G. mellonella larvae but also increased the survival of larvae infected with staphylococci (from 48 to 85%). Our findings suggest that EOs not only show promise as agents for treating biofilm-related wound infections but also that providing conditions reflecting the specific niche of the human body is of paramount importance in influencing the results obtained. However, before clinical application, challenges related to the methods of assessing their activity, microbial intra-species variability, and different levels of activity of various EOs should be analyzed and standardized.
Subject(s)
Oils, Volatile , Humans , Oils, Volatile/pharmacology , Staphylococcus aureus/physiology , Microbial Sensitivity Tests , Biofilms , Staphylococcus , Anti-Bacterial Agents/pharmacologyABSTRACT
The results of a lab-on-chip (LOC) platform fabrication equipped with a hydrogel matrix is reported. A 3D printing technique was used to provide a hybrid, "sandwiched" type structure, including two microfluidic substrates of different origins. Special attention was paid to achieving uniformly bio-printed microfluidic hydrogel layers of a unique composition. Six different hydrogel inks were proposed containing sodium alginate, agar, chitosan, gelatin, methylcellulose, deionized water, or 0.9% NaCl, varying in proportions. All of them exhibited appropriate mechanical properties showing, e.g., the value of elasticity modulus as similar to that of biological tissues, such as skin. Utilizing our biocompatible, entirely 3D bio-printed structure, for the first time, a multi-drug-resistant lung cancer cell line (H69AR) was cultured on-chip. Biological validation of the device was performed qualitatively and quantitatively utilizing LIVE/DEAD assays and Presto blue staining. Although all bio-inks exhibited acceptable cell viability, the best results were obtained for the hydrogel composition including 3% sodium alginate + 7% gelatin + 90% NaCl (0.9%), reaching approximately 127.2% after 24 h and 105.4% after 48 h compared to the control group (100%). Further research in this area will focus on the microfluidic culture of the chosen cancer cell line (H69AR) and the development of novel drug delivery strategies towards appropriate in vivo models for chemotherapy and polychemotherapy treatment.
Subject(s)
Hydrogels , Lung Neoplasms , Humans , Hydrogels/chemistry , Ink , Gelatin , Alginates/chemistryABSTRACT
INTRODUCTION: Decongestion is a therapeutic target in acute heart failure (AHF). Acetazolamide is a diuretic that decreases proximal tubular sodium reabsorption, and may also reverse hypochloremia Objectives: We assessed the decongestive, natriuretic, and chlorideregaining effects as well as the renal safety profile of oral acetazolamide (250 mg) used as an addon therapy in patients with AHF. PATIENTS AND METHODS: This prospective, randomized study was conducted at the Institute of Heart Diseases in Wroclaw, Poland. It involved patients with AHF who were randomly assigned to receive either 250 mg of oral acetazolamide or standard care, and who underwent clinical and laboratory followup for 3 consecutive days since the beginning of the treatment and at discharge. RESULTS: The study population comprised 61 patients (71% men), of whom 31 (51%) were included in the acetazolamide group. The mean (SD) age of the patients was 68 (13) years. In comparison with the controls, the acetazolamide group demonstrated significantly higher cumulative diuresis after 48 and 72 hours since treatment implementation, negative fluid balance, weight loss after 48 hours of treatment, weight loss throughout the hospitalization, natriuresis, and serum chloride concentration. In terms of the renal safety profile, no increase in the creatinine concentration and urinary renal biomarker levels was noted. CONCLUSIONS: Oral acetazolamide seems to be a valuable addon therapy that helps achieve comprehensive decongestion in patients with AHF.
Subject(s)
Diuretics , Heart Failure , Male , Humans , Aged , Female , Diuretics/therapeutic use , Acetazolamide/therapeutic use , Chlorides/therapeutic use , Prospective Studies , Heart Failure/drug therapy , Weight LossABSTRACT
Hydrogels are three-dimensional cross-linked polymeric networks capable of a large amount of fluid retention in their structure. Hydrogel outputs manufactured using additive manufacturing technologies are exposed to water loss, which may change their original shape and dimensions. Therefore, the possibility of retaining water is important in such a structure. In this manuscript, kinetic analysis of water evaporation from sodium alginate-based hydrogels exposed to different environmental conditions such as different temperatures (7 and 23 °C) and ambient humidity (45, 50 and 95%) has been carried out. The influence of the cross-linking method (different calcium chloride concentration-0.05, 0.1 and 0.5 M) of sodium alginate and cross-linking time on the water loss was also considered. Studies have shown that a decrease in the temperature and increase in the storage humidity can have a positive effect on the water retention in the structure. The storage conditions that led to the least weight and volume loss were T 7 °C and 95% humidity. These experiments may help in selecting the appropriate hydrogel preparation method for future applications, as well as their storage conditions for minimum water loss and, consequently, the least change in dimensions and shape.
ABSTRACT
PURPOSE: The aim of this paper was the application of a new dynamic-passive method of treatment in correction of hallux valgus and coexisting static deformities of the foot (transverse-plane and plano-valgus foot). METHODS: The study involved 50 patients; 26 with full big toe correction after the passive correction grip (group I) and 24 with big toe correction requiring additional passive abduction (group II). The patients regularly performed exercises using the designed device according to the planned schedule. The progress of the correction was assessed by a medical examination and additional tests. RESULTS: The cross-sectional area [cm2 ] of the abductor hallucis muscle in three-time points among I and II groups of patients with the hallux valgus was measured based on MRI images. The STIR examination showed, among others, the abductor hallucis muscle edema after exercises with the DPc device were carried out. It evidences that exercises with the new device activate the muscle. Alignment of the big toes of both feet in groups I and II were obtained with a statistically significant result ( p < 0.05). The percentage progression of correction for HV and I/II IM was calculated. CONCLUSIONS: Based on the new correction approach the alignment of the big toe phalanges and the remaining toes was obtained. The passive setup of the tendons with their distal inserts at the level of the big toe phalanges to the correct path of their course with the withdrawal of articular subluxations was obtained. Simultaneously, the big toe's passive correction was dynamically consolidated through a specially selected set of exercises.
Subject(s)
Hallux Valgus , Hallux , Humans , Hallux Valgus/diagnostic imaging , Hallux Valgus/surgery , Toes , Hallux/diagnostic imaging , Tendons/diagnostic imaging , Muscle, SkeletalABSTRACT
Photobiomodulation (PBM) in the red/near-infrared (R/NIR) spectral range has become widely recognized due to its anti-inflammatory and cytoprotective potential. We aimed to assess the effects of blood PBM on platelets function and hemolysis in an in vitro setting. Porcine blood samples were separated into four aliquots for this study, one of which served as a control, while the other three were subjected to three different NIR PBM dosages. The platelet count and functions and the plasma free haemoglobin and osmotic fragility of red blood cells were measured during the experiment. The control group had a considerable drop in platelet number, but the NIR exposed samples had more minimal and strictly dose-dependent alterations. These modifications were consistent with ADP and collagen-induced platelet aggregation. Furthermore, red blood cells that had received PBM were more resistant to osmotic stress and less prone to hemolysis, as seen by a slightly lower quantity of plasma free hemoglobin. Here we showed under well-controlled in vitro conditions that PBM reversibly inhibits platelet activation in a dose-dependent manner and reduces hemolysis.
Subject(s)
Blood Platelets , Hemolysis , Animals , Erythrocytes , Hematologic Tests , Platelet Activation , SwineABSTRACT
PURPOSE: Conventional orthodontic treatment with stainless steel orthodontic wires may be detrimental to oral health, as it contributes to demineralized lesions and increases adhesion and bacterial biofilm formation, which contributes to cavity development. An alternative that has been investigated to reduce the side effects of orthodontic treatment is the use of coating materials with antimicrobial nanoparticles. This study aims to evaluate the antiadherent and antibacterial properties of TiO2-coated and TiO2:Ag-coated stainless steel orthodontic wires against S. mutans bacteria. METHODS: In the sol-gel method, TiO2:Ag thin films were deposited on stainless steel orthodontic wires. Coated archwires were analyzed for their antibacterial and antiadherent properties. The evaluation of Streptococcus mutans adhesion to the orthodontic wires' surface was conducted according to the type of coating used, biofilm formation assay, and measurement of the pH of the bacterial community. RESULTS: In the microbiological test, the TiO2:Ag coatings revealed a statistically significant difference in terms of microbial adhesion and biofilm formation by Streptococcus mutans. The TiO2:Ag coating on stainless steel wire increased pH levels in the saliva environment. CONCLUSIONS: It can be concluded that antimicrobial orthodontic wires coated with silver TiO2 nanoparticles using the sol-gel thin film are a promising choice for improving orthodontic treatment.
ABSTRACT
Sustaining the vital functions of cells outside the organism requires strictly defined parameters. In order to ensure their optimal growth and development, it is necessary to provide a range of nutrients and regulators. Hydrogels are excellent materials for 3D in vitro cell cultures. Their ability to retain large amounts of liquid, as well as their biocompatibility, soft structures, and mechanical properties similar to these of living tissues, provide appropriate microenvironments that mimic extracellular matrix functions. The wide range of natural and synthetic polymeric materials, as well as the simplicity of their physico-chemical modification, allow the mechanical properties to be adjusted for different requirements. Sodium alginate-based hydrogel is a frequently used material for cell culture. The lack of cell-interactive properties makes this polysaccharide the most often applied in combination with other materials, including gelatin. The combination of both materials increases their biological activity and improves their material properties, making this combination a frequently used material in 3D printing technology. The use of hydrogels as inks in 3D printing allows the accurate manufacturing of scaffolds with complex shapes and geometries. The aim of this paper is to provide an overview of the materials used for 3D cell cultures, which are mainly alginate-gelatin hydrogels, including their properties and potential applications.
ABSTRACT
In this literature review, the current state-of-art of coatings for orthodontic archwires' increasing antimicrobial and relevant mechanical properties, such as surface topography, friction or corrosion resistance, has been presented. There is a growing request for orthodontic appliances, therefore, most researchers focus on innovative functional coatings to cover orthodontic archwires and brackets. Orthodontic appliances are exposed to the unfavorable oral cavity environment, consisting of saliva flow, food, temperature and appliance force. As a consequence, friction or biocorrosion processes may occur. This can affect the functionality of the orthodontic elements, causing changes in their microstructure, surface topography and mechanical properties. Furthermore, the material which the orthodontic archwire is made from is of particular importance in terms of the possible corrosion resistance. This is especially important for patients who are hypersensitive to metals, for example, nickel, which causes allergic reactions. In the literature, there are some studies, carried out in vitro and in vivo, mostly examining the antibacterial, antiadherent, mechanical and roughness properties of functional coatings. They are clinically acceptable but still some properties have to be studied and be developed for better results. In this paper the influence of additives such as nanoparticles of silver and nitrogen-doped TiO2 applied on orthodontic brackets by different methods on the antimicrobial properties was analyzed. Future improvement of coating techniques as well as modification of the archwire composition can reduce the release of nickel ions and eliminate friction and bacterial adhesion problems, thus accelerating treatment time.
ABSTRACT
The purpose of this study was to ascertain the relationships between the amplitude of the corneal pulse (CP) signal and the parameters of corneal biomechanics during ex-vivo intraocular pressure (IOP) elevation experiments on porcine eyes with artificially induced ocular pulse cycles. Two experiments were carried out using porcine eyes. In the first one, a selected eye globe was subjected to three IOP levels (15, 30 and 45 mmHg), where changes in physical ocular pulse amplitude were controlled by infusion/withdrawal volumes (ΔV). In the second experiment, six eyes were subjected to IOP from 15 mmHg to 45 mmHg in steps of 5 mmHg with a constant ΔV, where corneal deformation parameters were measured using Corvis ST. In both experiments, at each IOP, the CP and IOP signals were acquired synchronically using a non-contact ultrasonic distance sensor and a pressure transmitter, respectively. Based on the amplitudes of the CP and IOP signals ocular pulse based corneal rigidity index (OPCRI) was calculated. Results indicate positive correlations between ΔV and the physical ocular pulse amplitude, and between ΔV and the corneal pulse amplitude (both p < 0.001). OPCRI was found to increase with elevated IOP. Furthermore, IOP statistically significantly differentiated changes in OPCRI, the amplitudes of CP and IOP signals and in most of the corneal deformation parameters (p < 0.05). The partial correlation analysis, with IOP as a control variable, revealed a significant correlation between the length of the flattened cornea during the first applanation (A1L) and the corneal pulse amplitude (p = 0.002), and between A1L and OPCRI (p = 0.003). In conclusion, this study proved that natural corneal pulsations, detected with a non-contact ultrasonic technique, reflect pressure-volume dynamics and can potentially be utilized to assess stiffness of the cornea. The proposed new rigidity index could be a simple approach to estimating corneal rigidity.
Subject(s)
Cornea/physiology , Intraocular Pressure/physiology , Tonometry, Ocular/methods , Animals , Biomechanical Phenomena , Elasticity , Glaucoma , Pilot Projects , SwineABSTRACT
In the present study, the effect of the static and alternating magnetic field applied individually and in combination with an algal extract on the germination of soybean seeds (Glycine max (L.) Merrill) and chlorophyll content was examined. The exposure time of seeds to the static magnetic field was 3, 6, and 12 min, whereas to the alternating magnetic field was 1, 2.5, and 5 min. The static magnetic field was obtained by means of a permanent magnets system while the alternating magnetic field by means of magnetic coils. Algal extract was produced from a freshwater macroalga-Cladophora glomerata using ultrasound homogenizer. In the germination tests, 10% extract was applied to the paper substrate before sowing. This is the first study that compares the germination of soybean seeds exposed to the static and alternating magnetic field. The best effect on the germination and chlorophyll content in seedlings had synergistic action of the static magnetic field on seeds for 3 min applied together with the extract and alternating magnetic field used for 2.5 min. It is not possible to clearly state which magnetic field better stimulated the germination of seeds, but the chlorophyll content in seedlings was much higher for alternating magnetic field.
ABSTRACT
The aim was to ascertain whether the characteristics of the corneal pulse (CP) measured in-vivo in a rabbit eye change after short-term artificial increase of intraocular pressure (IOP) and whether they correlate with corneal biomechanics assessed in-vitro. Eight New Zealand white rabbits were included in this study and were anesthetized. In-vivo experiments included simultaneous measurements of the CP signal, registered with a non-contact method, IOP, intra-arterial blood pressure, and blood pulse (BPL), at the baseline and short-term elevated IOP. Afterwards, thickness of post-mortem corneas was determined and then uniaxial tensile tests were conducted leading to estimates of their Young's modulus (E). At the baseline IOP, backward stepwise regression analyses were performed in which successively the ocular biomechanical, biometric and cardiovascular predictors were separately taken into account. Results of the analysis revealed that the 3rd CP harmonic can be statistically significantly predicted by E and central corneal thickness (Models: R2 = 0.662, p < 0.005 and R2 = 0.832, p < 0.001 for the signal amplitude and power, respectively). The 1st CP harmonic can be statistically significantly predicted by the amplitude and power of the 1st BPL harmonic (Models: R2 = 0.534, p = 0.015 and R2 = 0.509, p < 0.018, respectively). For elevated IOP, non-parametric analysis indicated significant differences for the power of the 1st CP harmonic (Kruskal-Wallis test; p = 0.031) and for the mean, systolic and diastolic blood pressures (p = 0.025, p = 0.019, p = 0.033, respectively). In conclusion, for the first time, the association between parameters of the CP signal in-vivo and corneal biomechanics in-vitro was confirmed. In particular, spectral analysis revealed that higher amplitude and power of the 3rd CP harmonic indicates higher corneal stiffness, while the 1st CP harmonic correlates positively with the corresponding harmonic of the BPL signal.
Subject(s)
Cornea/physiology , Intraocular Pressure/physiology , Animals , Biomechanical Phenomena , Models, Animal , Pilot Projects , RabbitsABSTRACT
Introduction and Aim. Exceptional properties of the NiTi archwires may be jeopardized by the oral cavity; thus its long-term effect on the mechanical and physiochemical properties of NiTi archwires was the aim of work. Material and Methods. Study group comprised sixty 0.016 × 0.022 NiTi archwires from the same manufacturer evaluated (group A) after the first 12 weeks of orthodontic treatment. 30 mm long pieces cut off from each wire prior to insertion formed the control group B. Obeying the strict rules of randomization, all samples were subjected to microscopic evaluation and nanoindentation test. Results. Both groups displayed substantial presence of nonmetallic inclusions. Heterogeneity of the structure and its alteration after usage were found in groups B and A, respectively. Conclusions. Long-term, reliable prediction of biomechanics of NiTi wires in vivo is impossible, especially new archwires from the same vendor display different physiochemical properties. Moreover, manufacturers have to decrease contamination in the production process in order to minimize risk of mutual negative influence of nickel-titanium archwires and oral environment.
Subject(s)
Nickel/therapeutic use , Orthodontic Wires , Stress, Mechanical , Titanium/therapeutic use , Corrosion , Humans , Materials Testing , Mouth/chemistry , Mouth/drug effects , Nickel/chemistry , Surface Properties , Titanium/chemistryABSTRACT
There is a growing body of evidence that near infrared (NIR) light exerts beneficial effects on cells. Its usefulness in the treatment of cancer, acute brain injuries, strokes and neurodegenerative disorders has been proposed. The mechanism of the NIR action is probably of photochemical nature, however it is not fully understood. Here, using a relatively simple biological model, human red blood cells (RBCs), and a polychromatic non-polarized light source, we investigate the impact of NIR radiation on the oxygen carrier, hemoglobin (Hb), and anion exchanger (AE1, Band 3). The exposure of intact RBCs to NIR light causes quaternary transitions in Hb, dehydration of proteins and decreases the amount of physiologically inactive methemoglobin, as detected by Raman spectroscopy. These effects are accompanied by a lowering of the intracellular pH (pHi) and changes in the cell membrane topography, as documented by atomic force microscopy (AFM). All those changes are in line with our previous studies where alterations of the membrane fluidity and membrane potential were attributed to NIR action on RBCs. The rate of the above listed changes depends strictly on the dose of NIR light that the cells receive, nonetheless it should not be considered as a thermal effect.
Subject(s)
Anion Exchange Protein 1, Erythrocyte/metabolism , Erythrocytes/metabolism , Hemoglobins/metabolism , Infrared Rays , Protein Processing, Post-Translational/radiation effects , Humans , Hydrogen-Ion ConcentrationABSTRACT
Among the population over the age of 65 years joint diseases constitute more than 50% of chronic diseases and most often apply to the hip. Endoprosthetics is one of the methods for treating this condition and is considered one of the best--clinically and economically--interventions of the modern medicine. However, it is not free of complications among which the loosening of the endoprosthesis is commonest. In publications, a full discussion has been going on arguing whether the complication is caused by biological or mechanical factors. The authors--aiming to answer this question based on CT--tested the influence of the implantation of the acetabular component on the pelvic bone density in Hounsfield units within a 6-month period after the operation. The test results indicate the bone density decrease. The statistical analysis shows, however, that the changes are not statistically significant.