Co-synthesis and Electrochemical Investigation of the Nitrogen-Doped Carbon Layer with Metallic Nano Beads on the SiOx Anode for Lithium Secondary Batteries.

The high theoretical capacity (∼2000 mAh g-1) of silicon suboxide (SiOx, with 1 < x < 2) can solve the energy density issue of the graphite anode in Li-ion batteries. In addition, it has an advantage in terms of volume expansion or side reactions compared to pure Si or Li metals, which are considered as next-generation anode materials. However, the loading content of SiOx is limited in commercial anodes because of its low cycle stability and initial coulombic efficiency. In this study, a nitrogen-doped carbon layer with Cu beads (N-C/Cu) derived from copper phthalocyanine (CuPc) is applied to a SiOx electrode to improve its electrochemical performance. The SiOx electrode is simultaneously coated with a Cu- and N-doped carbon layer using CuPc. N-C/Cu synergistically enhances the electric conductivity of the electrode, thus improving its electrochemical performance. The SiOx/N-C/Cu composite has better cyclability and higher capacity (1095.5 mAh g-1) than the uncoated electrode, even after 200 cycles in the 0.5 C condition. In full-cell cycling with NCM811 cathodes, the SiOx (60 wt % of SiOx, with a n/p ratio of 1.1) and graphite-mixed (7.8 wt % of SiOx, with a n/p ratio of 1.1) anodes also show improved electrochemical performances in the same conditions.

Aqueous Quaternary Polymer Binder Enabling Long-Life Lithium-Sulfur Batteries by Multifunctional Physicochemical Properties.

Lithium-sulfur batteries (LSBs) have been considered promising candidates for application in high-density energy storage systems owing to their high gravimetric and volumetric energy densities. However, LSB technology faces many barriers from the intrinsic properties of active materials that need to be solved to realize high-performance LSBs. Herein, an aqueous binder, that is, PPCP, based on polyethyleneimine (PEI), polyvinylpyrrolidone (PVP), citric acid (CA), and polyethylene oxide (PEO), was developed. The synthesized PPCP binder has incredible mechanical properties, suitable viscosity, and essential functional groups for developing an effective and reliable LSB system. This study demonstrates that CA is crucial in cross-linking PEI-PVP polymer molecules, and PEO segments significantly enhance the flexibility of the PPCP binder; thus, the binder can mechanically stabilize the cathode structure over many operating cycles. The redistribution of active materials during the charge-discharge processes and reduction of the shuttle effect originate from the excellent chemical interactions of PPCP with lithium polysulfides, which is confirmed by the density functional theory calculation, enabling an ultra-long electrochemical cycle life of 1800 cycles with a low decay rate of 0.0278% cycle-1.

Combined Treatment on an Al Surface to Improve the Metal-Polymer Adhesion Strength.

The development of mobile industries and urban transportation today requires nanotechnology for research and processing of metallic surfaces. Here, aluminum alloys (Al) are the most common material with the best physical properties that need to be treated. The advantages of Al in manufacturing are obvious; however, the Al surface is sensitive to the presence of acid or base, and thus protecting the Al surface is mandatory. In this study, Al surfaces have been subjected to a new surface treatment process that includes sandblasting, anodizing, and subsequent post-etching steps. The treated surfaces are evaluated by surface morphology including contact angle measurement and polymer adhesion strength. The adhesion strength of blasted Al-polymer assemblies with and without an anodizing step have been performed with a single lap shear test. This clearly shows the profound effect of the combined treatment process. The results reveal that a combination of high surface roughness and area as well as a thick Al2O3 layer with micro-cavities created by a post-etch step can significantly improve the adhesion strength of the Al-polymer. This, in turn, enhances the quality of and longevity of Al surface in production and application.

Carbon Nitride Phosphorus as an Effective Lithium Polysulfide Adsorbent for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are attracting substantial attention because of their high-energy densities and potential applications in portable electronics. However, an intrinsic property of Li-S systems, that is, the solubility of lithium polysulfides (LiPSs), hinders the commercialization of Li-S batteries. Herein, a new material, that is, carbon nitride phosphorus (CNP), is designed and synthesized as a superior LiPS adsorbent to overcome the issues of Li-S batteries. Both the experimental results and the density functional theory (DFT) calculations confirm that CNP possesses the highest binding energy with LiPS at a P concentration of ∼22% (CNP22). The DFT calculations explain the simultaneous existence of Li-N bonding and P-S coordination in the sulfur cathode when CNP22 interacts with LiPS. By introducing CNP22 into the Li-S systems, a sufficient charging capacity at a low cutoff voltage, that is, 2.45 V, is effectively implemented, to minimize the side reactions, and therefore, to prolong the cycling life of Li-S systems. After 700 cycles, a Li-S cell with CNP22 gives a high discharge capacity of 850 mA h g-1 and a cycling stability with a decay rate of 0.041% cycle-1. The incorporation of CNP22 can achieve high performance in Li-S batteries without concerns regarding the LiPS shuttling phenomenon.