Microbial communities present in Sargassum spp. leachates from the Mexican Caribbean which are involved in their degradation in the environment, a tool to tackle the problem.

The Sargassum phenomenon is currently affecting the Caribbean in several ways; one of them is the increase of greenhouse gases due to the decomposition process of this macroalgae; these processes also produce large amounts of pollutant leachates, in which several microbial communities are involved. To understand these processes, we conducted a 150-day study on the Sargassum spp environmental degradation under outdoor conditions, during which leachates were collected at 0, 30, 90, and 150 days. Subsequently, a metagenomic study of the microorganisms found in the leachates was carried out, in which changes in the microbial community were observed over time. The results showed that anaerobic bacterial genera such as Thermofilum and Methanopyrus were predominant at the beginning of this study (0 and 30 days), degrading sugars of sulfur polymers such as fucoidan, but throughout the experiment, the microbial communities were changed also, with the genera Fischerella and Dolichospermum being the most predominant at days 90 and 150, respectively. A principal component analysis (PCA) indicated, with 94% variance, that genera were positively correlated at 30 and 90 days, but not with initial populations, indicating changes in community structure due to sargassum degradation were present. Finally, at 150 days, the leachate volume decreased by almost 50% and there was a higher abundance of the genera Desulfobacter and Dolichospemum. This is the first work carried out to understand the degradation of Sargassum spp, which will serve, together with other works, to understand and provide a solution to this serious environmental problem in the Caribbean.

Environmental impact of Sargassum spp. landings: an evaluation of leachate released from natural decomposition at Mexican Caribbean coast.

Large volumes of pelagic Sargassum spp. have stranded periodically on the Mexican Caribbean shoreline. The aim of this research was to study the mobility of metals through the leachates released into the environment during the natural decomposition process of Sargassum spp. Fresh Sargassum samples were placed in cone-bed reactors: under laboratory and local environmental conditions. The leachate generated naturally by decomposition in both conditions was recovered periodically and analyses of pH, volume, and metal content were carried out. Sargassum biomass was monitored by electron microscopy, FT-IR, and CHNS analysis. The Sargassum biomass studied presented a C: N ratio of 24.39, making it a potential raw feedstock for biofuels and other value-added products. Calculations performed on leachate production allowed inferring that each ton of fresh Sargassum that decomposes at a controlled temperature of 27 °C can produce 316 L of leachate. This leachate can contain 5.67 g of As and other potentially toxic metals (e.g., B, Al, Cu). At the end of both experiments, the biomass that was incubated for 30 days presented a C: N ratio of 28.86, so it can still be used as raw material for biofuels; however, the Sargassum biomass that remained 180 days in incubation decreased its C:N ratio at 8.45 at this point, it can be considered a waste. The leachate generated during the natural decomposition process of Sargassum on beaches or disposal sites represents a high risk of contamination of the Yucatan Peninsula water system due to the high content of arsenic and the presence of potentially toxic metals.

Consolidated Bioprocess for Bioethanol Production from Raw Flour of Brosimum alicastrum Seeds Using the Native Strain of Trametes hirsuta Bm-2.

Consolidated bioprocessing (CBP), which integrates biological pretreatment, enzyme production, saccharification, and fermentation, is a promising operational strategy for cost-effective ethanol production from biomass. In this study, the use of a native strain of Trametes hirsuta (Bm-2) was evaluated for bioethanol production from Brosimum alicastrum in a CBP. The raw seed flour obtained from the ramon tree contained 61% of starch, indicating its potential as a raw material for bioethanol production. Quantitative assays revealed that the Bm-2 strain produced the amylase enzyme with activity of 193.85 U/mL. The Bm-2 strain showed high tolerance to ethanol stress and was capable of directly producing ethanol from raw flour at a concentration of 13 g/L, with a production yield of 123.4 mL/kg flour. This study demonstrates the potential of T. hirsuta Bm-2 for starch-based ethanol production in a consolidated bioprocess to be implemented in the biofuel industry. The residual biomass after fermentation showed an average protein content of 22.5%, suggesting that it could also be considered as a valuable biorefinery co-product for animal feeding.

Influence of two polarization potentials on a bioanode microbial community isolated from a hypersaline coastal lagoon of the Yucatan peninsula, in México.

In recent years, halotolerant biofilms have become a subject of interest for its application in Bioelectrochemical systems for wastewater treatment. To determine if the polarization potential affects the microbial community of a halotolerant bioanode, four bioanodes were poised at potentials of +0.34 V/SHE and - 0.16 V/SHE and the 16S rRNA gene was analyzed through a MiSeq (Ilumina) system. Oceanospirillum, Halomonas and Marinobacterium were the most predominant genus; no previous studies have reported the presence of Oceanospirillum in anodic biofilms. The fitness with the dataset for +0.34 V/SHE with a modified Butler Volmer Monod model, gives a value of K1 was 0.0002 (2.64 A m-2 and 38% coulombic efficiency), indicating the fastest electrochemical reaction. Whereas that -0.16 V/SHE case, the high value of K1 (12.2 with 1.82 A m-2 and 10% coulombic efficiency) indicated that the electron transfer was far from being reversible (Nernstian).

Corn industrial wastewater (nejayote): a promising substrate in Mexico for methane production in a coupled system (APCR-UASB).

In Mexico, the corn tortilla is a food of great economic importance. Corn tortilla production generates about 1500-2000 m3 of wastewater per 600 tons of processed corn. Although this wastewater (also known as nejayote) has a high organic matter content, few studies in Mexico have analyzed its treatment. This study presents fresh data on the potential methane production capacity of nejayote in a two-phase anaerobic digestion system using an Anaerobic-Packed Column Reactor (APCR) to optimize the acidogenic phase and an up-flow anaerobic sludge blanket (UASB) reactor to enhance the methanogenic process. Results indicate that day 8 was ideal to couple the APCR to the UASB reactor. This allowed for a 19-day treatment that yielded 96% COD removal and generated a biogas containing 84% methane. The methane yield was 282 L kg-1 of CODremoved. Thus, two-phase anaerobic digestion is an efficient process to treat nejayote; furthermore, this study demonstrated the possibility of using an industrial application by coupling the APCR to the UASB reactor system, in order to assess its feasibility for biomethane generation as a sustainable bioenergy source.

Pretreatment of vinasse from the sugar refinery industry under non-sterile conditions by Trametes versicolor in a fluidized bed bioreactor and its effect when coupled to an UASB reactor.

BACKGROUND: During hydrous ethanol production from the sugar refinery industry in Mexico, vinasse is generated. Phenolic compounds and melanoidins contribute to its color and make degradation of the vinasse a difficult task. Although anaerobic digestion (AD) is feasible for vinasse treatment, the presence of recalcitrant compounds can be toxic or inhibitory for anaerobic microorganism. Therefore, this study presents new data on the coupled of the FBR (Fluidized Bed Bioreactor) to the UASB (Upflow Anaerobic Sludge Blanket) reactor under non-sterile conditions by T. versicolor. Nevertheless, for an industrial application, it is necessary to evaluate the performance in this kind of proposal system. RESULTS: Therefore, this study used a FBR for the removal of phenolic compounds (67%) and COD (38%) at non-sterile conditions. Continuous operation of the FBR was successfully for 26 days according to the literature. When the FBR was coupled to the UASB reactor, we obtained a better quality of effluent, furthermore methane content and yield were 74% and 0.18 m3 CH4/ kg CODremoval respectively. CONCLUSIONS: This study demonstrated the possibility of using for an industrial application the coupled of the FBR to the UASB reactor under non-sterile conditions. Continuous operation of the FBR was carried out successfully for 26 days, which is the highest value found in the literature.

Removal of organic matter and electricity generation of sediments from Progreso, Yucatan, Mexico, in a sediment microbial fuel cell.

Sediment microbial fuel cells (SMFCs) are devices that generate electrical energy through sediments rich in organic matter (OM). The present study assessed the potential of sediments collected at two sites in Yucatan, Mexico, (the swamp of Progreso port and Yucalpetén dock) to be used in these electrochemical devices. Sediments were collected during the rainy and winter seasons and were monitored in the SMFC for 120 days through electrochemical and physicochemical characterization. OM removal in the SMFC ranged from 8.1-18.01%, generating a maximum current density of 232.46 mA/cm2 and power density of 95.85 mW/cm2. SUVA analysis indicated that with a young soil, the ratio E4/E6 presented evidence directly related to the degradation of aromatic and aliphatic compound formation, implying humification and, therefore, sediment enrichment.

Characterization of anode and anolyte community growth and the impact of impedance in a microbial fuel cell.

BACKGROUND: A laboratory-scale two-chamber microbial fuel cell employing an aerated cathode with no catalyst was inoculated with mixed inoculum and acetate as the carbon source. Electrochemical impedance spectroscopy (EIS) was used to study the behavior of the MFC during initial biofilm (week 1) and maximum power density (week 20). EIS were performed on the anode chamber, biofilm (without anolyte) and anolyte (without biofilm). Nyquist plots of the EIS data were fitted with two equivalent electrical circuits to estimate the contributions of intrinsic resistances to the overall internal MFC impedance at weeks 1 and 20, respectively. RESULTS: The results showed that the system tended to increase power density from 15 ± 3 (week 1) to 100 ± 15 mW/m(2) (week 20) and current density 211 ± 7 (week 1) to 347 ± 29 mA/m(2) (week 20). The Samples were identified by pyrosequencing of the 16S rRNA gene and showed that initial inoculum (week 1) was constituted by Proteobacteria (40%), Bacteroidetes (22%) and Firmicutes (18%). At week 20, Proteobacterial species were predominant (60%) for electricity generation in the anode biofilm, being 51% Rhodopseudomonas palustris. Meanwhile on anolyte, Firmicutes phylum was predominant with Bacillus sp. This study proved that under the experimental conditions used there is an important contribution from the interaction of the biofilm and the anolyte on cell performance. Table 1 presents a summary of the specific influence of each element of the system under study. CONCLUSIONS: The results showed certain members of the bacterial electrode community increased in relative abundance from the initial inoculum. For example, Proteobacterial species are important for electricity generation in the anode biofilms and Firmicutes phylum was predominant on anolyte to transfer electron. R1 is the same in the three systems and no variation is observed over time. The biofilm makes a significant contribution to the charge transfer processes at the electrode (R2 and Cdl) and, consequently, on the performance of the anode chamber. The biofilm can act as a barrier which reduces diffusion of the anolyte towards the electrode, all the while behaving like a porous material. The anolyte and its interaction with the biofilm exert a considerable influence on diffusion processes, given that it presents the highest values for Rd which increased at week 20.

Vinasses: characterization and treatments.

The final products of the ethanol industry are alcoholic beverages, industrial ethanol and biofuels. They are produced by the same production process, which includes fermentation and distillation of raw materials which come from plant biomass. At the end of the distillation process a waste effluent is obtained called vinasse or stillage. The direct disposal of stillages on land or in groundwater (rivers, streams or lakes), or even for the direct irrigation of crops, pollutes the environment due to their high organic contents, dissolved solids and many other compounds which are toxic or could be contaminants under certain environmental conditions. This work reviews the characterization of vinasses from different feedstock sources and the main treatments for conditioning the soluble solids of vinasses before their disposal.