ABSTRACT
This paper describes the self-assembly of small objects--polyhedral metal plates with largest dimensions of 10 to 30 microm--into highly ordered, three-dimensional arrays. The plates were fabricated using photolithography and electrodeposition techniques, and the faces of the plates were functionalized to be hydrophobic or hydrophilic using self-assembled monolayers (SAMs). Self-assembly occurs in water through capillary interactions between thin films of a hydrophobic liquid (a liquid prepolymer adhesive) coated onto the hydrophobic faces of the plates; coalescence of the adhesive films reduces the interfacial free energy of the system and drives self-assembly. By altering the size and surface-patterning of the plates, the external morphologies of the aggregates were varied. Curing the adhesive furnished mechanically stable aggregates that were characterized by scanning electron microscopy (SEM). For assemblies formed by plates partially composed of a sacrificial material, a subsequent etching step furnished fully open, three-dimensional microstructures. This work validates the use of capillary interactions for three-dimensional mesoscale self-assembly in the 10-microm-size regime and opens new avenues for the fabrication of complex, three-dimensional microscructures.
Subject(s)
Metals/chemistry , Electroplating , Particle SizeABSTRACT
Microfluidic devices are finding increasing application as analytical systems, biomedical devices, tools for chemistry and biochemistry, and systems for fundamental research. Conventional methods of fabricating microfluidic devices have centered on etching in glass and silicon. Fabrication of microfluidic devices in poly(dimethylsiloxane) (PDMS) by soft lithography provides faster, less expensive routes than these conventional methods to devices that handle aqueous solutions. These soft-lithographic methods are based on rapid prototyping and replica molding and are more accessible to chemists and biologists working under benchtop conditions than are the microelectronics-derived methods because, in soft lithography, devices do not need to be fabricated in a cleanroom. This paper describes devices fabricated in PDMS for separations, patterning of biological and nonbiological material, and components for integrated systems.
Subject(s)
Chemistry Techniques, Analytical/methods , Dimethylpolysiloxanes , Equipment and Supplies , Silicones , Animals , HumansABSTRACT
This paper describes the fabrication of large (up to 45 cm(2)) arrays of microwells, with volumes as small as â¼3 fL/well and densities as high as 10(7) wells/cm(2). These arrays of microwells are formed by casting an elastomer, poly(dimethylsiloxane) (PDMS), against "masters" prepared by photolithography; arrays of microwells in other polymers can be formed by using a master consisting of posts in PDMS. A straightforward technique, discontinuous dewetting, allows wells to be filled rapidly (typically on the order of 10(4) wells/s) and uniformly with a wide range of liquids. Several rudimentary strategies for addressing microwells are investigated, including electroosmotic pumping and gaseous diffusion.
ABSTRACT
This paper describes a procedure that makes it possible to design and fabricate (including sealing) microfluidic systems in an elastomeric material [Formula: see text] poly(dimethylsiloxane) (PDMS) [Formula: see text] in less than 24 h. A network of microfluidic channels (with width >20 µm) is designed in a CAD program. This design is converted into a transparency by a high-resolution printer; this transparency is used as a mask in photolithography to create a master in positive relief photoresist. PDMS cast against the master yields a polymeric replica containing a network of channels. The surface of this replica, and that of a flat slab of PDMS, are oxidized in an oxygen plasma. These oxidized surfaces seal tightly and irreversibly when brought into conformal contact. Oxidized PDMS also seals irreversibly to other materials used in microfluidic systems, such as glass, silicon, silicon oxide, and oxidized polystyrene; a number of substrates for devices are, therefore, practical options. Oxidation of the PDMS has the additional advantage that it yields channels whose walls are negatively charged when in contact with neutral and basic aqueous solutions; these channels support electroosmotic pumping and can be filled easily with liquids with high surface energies (especially water). The performance of microfluidic systems prepared using this rapid prototyping technique has been evaluated by fabricating a miniaturized capillary electrophoresis system. Amino acids, charge ladders of positively and negatively charged proteins, and DNA fragments were separated in aqueous solutions with this system with resolution comparable to that obtained using fused silica capillaries.
ABSTRACT
Lyme disease is a zoonosis transmitted by ticks and caused by the spirochete Borrelia burgdorferi sensu lato. Epidemiological and ecological investigations to date have focused on the terrestrial forms of Lyme disease. Here we show a significant role for seabirds in a global transmission cycle by demonstrating the presence of Lyme disease Borrelia spirochetes in Ixodes uriae ticks from several seabird colonies in both the Southern and Northern Hemispheres. Borrelia DNA was isolated from I. uriae ticks and from cultured spirochetes. Sequence analysis of a conserved region of the flagellin (fla) gene revealed that the DNA obtained was from B. garinii regardless of the geographical origin of the sample. Identical fla gene fragments in ticks obtained from different hemispheres indicate a transhemispheric exchange of Lyme disease spirochetes. A marine ecological niche and a marine epidemiological route for Lyme disease borreliae are proposed.
Subject(s)
Birds/microbiology , Borrelia burgdorferi Group/isolation & purification , Lyme Disease/transmission , Animals , Arthropod Vectors/microbiology , Base Sequence , Borrelia/genetics , Borrelia burgdorferi Group/genetics , DNA Primers/genetics , DNA, Bacterial/genetics , Flagellin/genetics , Flight, Animal , Genes, Bacterial , Ixodes/microbiology , Marine Biology , Molecular Sequence Data , Polymerase Chain ReactionABSTRACT
Nymphal Ixodes scapularis Say, the vector of Lyme borreliosis, was most common in forested areas across Shelter Island, Suffolk County, New York, and least common in xeric habitats such as beach and grassland. At the scale of individual house yards, nymphs were most common at wooded edges of property and least common on lawns. The abundance of ticks at yard edges was positively correlated with numbers on lawns and in landscaping, suggesting that tick abundance in woods affects abundances in adjacent yards. Because 57% of all yard area is adjacent to woodlands on Shelter Island, public health efforts to reduce tick populations in wooded areas should supplement efforts by individual yard owners to decrease risk. Methods of tick control for woodlands should also be evaluated for their effect on tick populations in adjacent yard habitats.
Subject(s)
Ecology , Ticks , Animals , Geography , Housing , Humans , Information Systems , New York , Population Density , Population DynamicsABSTRACT
Nymphal Ixodes scapularis Say deer ticks were collected at 22 parks or other natural areas on Long Island, New York, to examine the relationship between tick populations and geographic position, size of area, presence of white-tailed deer, Odocoileus virginianus (Zimmerman), and numbers of human Lyme disease cases in adjacent communities. Nymphal ticks were 93% less abundant when deer were absent and were also less common in smaller natural areas. Geographic position on Long Island was not important. Tick numbers were significantly correlated with human Lyme disease incidence in adjacent townships. A second survey of larval ticks from five areas where deer were absent and six where deer were present found larvae present at four of the five sites without deer, but at only 2% of the levels found where deer were present. These results suggest that populations of I. scapularis can occur and reproduce in the absence of white-tailed deer, so that eradication of all deer would greatly reduce, but not eliminate, all risk of Lyme disease.
Subject(s)
Deer/parasitology , Ticks , Animals , Demography , Humans , Incidence , Larva , Lyme Disease/epidemiology , New York/epidemiology , Nymph , Reproduction , Ticks/physiologyABSTRACT
Based on winter flagging experiments on Long Island, NY, adult Ixodes scapularis Say have an apparent threshold of questing activity at 4 degrees C. This threshold should be incorporated into public education efforts because the public may be at risk of contracting Lyme disease any time during the winter when temperatures exceed 4 degrees C.
Subject(s)
Arachnid Vectors/physiology , Temperature , Ticks/physiology , Animals , Female , Lyme Disease/transmission , Male , Motor Activity/physiologyABSTRACT
The risk for human infection with Lyme disease appears linked to the abundance of infected vector ticks, principally Ixodes dammini Spielman, Clifford, Piesman & Corwin, in the eastern United States. Habitat destruction by burning, although not well studied, has long been considered as an effective alternative to synthetic insecticides as a means of reducing tick populations. We evaluated the effect of a single spring burning of the woodland understory on the transmission risk of Lyme disease spirochetes (Borrelia burgdorferi Johnson, Schmid, Hyde, Steigerwalt & Brenner) on Shelter Island, Long Island, NY. Following a burn in early April 1991, the abundance of nymphal I. dammini was 49% lower in the burned portion of a woodlot compared with the unburned portion. However, risk of encountering nymphs infected with B. burgdorferi remained similar in both burned and unburned woods. It is suggested that burning vegetation may disproportionately kill deer-derived rather than rodent-derived nymphs, significantly reducing tick abundance without affecting transmission risk.
Subject(s)
Borrelia burgdorferi Group/isolation & purification , Fires , Lyme Disease/transmission , Mites/microbiology , Tick Control , Animals , Lyme Disease/epidemiology , Nymph/microbiology , Risk FactorsABSTRACT
1. Ticks (Ornithodoros capensis Neumann) were most abundant on incubating host African penguins (Spheniscus demersus Linnaeus) at 24.00 hours and least abundant during 09.00-12.00 hours during 4 day periods in May and October at 3 h intervals. 2. Ticks were three times as abundant in May, the start of the breeding season, as in October, at its end. 3. Air temperature and humidity appear less important than light levels in determining tick activity. 4. The degree of tick parasitism of breeding seabirds is best studied at night.