Utility of sustainable ratio derivative spectrophotometry for the concurrent assay of synergistic repurposed drugs for COVID-19 infections; Insilico pharmacokinetics proof.

The cutting-edge combination of fluvoxamine (FVM) and ivermectin (IVM) has been presented as a proposed dosage form for the treatment of COVID-19 infections in early diagnosed patients. The main objective of this work is to develop simple, sensitive, and efficient methods for the synchronous quantification of FVM and IVM without any prior separation. Four green UV-methods were employed for the synchronous quantification, namely: Fourier functions convolution of absorption spectra, FFAS, Fourier functions convolution of derivative spectra of absorption curves, FFDS, Fourier function convolution of ratio spectra of absorption curves, FFRS and the dual-wavelength method, DWM. FFRS and DWM approaches can be able to reconcile the two components' significantly interfering spectrum presented in this commixture. Good linearity was checked in the range of 5-40, and 2.5-25 µg/mL for the FVM, and IVM, respectively. All approaches developed have been recommended in compliance with ICH principles. Furthermore, the approaches' greenness was predestined by "National Environmental Method Index" (NEMI), "Analytical GREEnness metric (AGREE)", the "Analytical Eco-Scale", and the "Green Analytical Procedure Index" (GAPI). In addition, spider diagram was utilized for the assessment of the greenness index of the solvent used. Beside greenness, the sustainability of our methods was investigated using the HEXAGON tool. Continuing the constant pursuit of greenness, drug-drug interactions (DDIs) between FVM & IVM were predicted by insilico tools to ensure the safety of the suggested mixture as a preliminary step before invitro and in vivo studies. Because they were deemed sustainable, affordable, and successful, the suggested UV-methods may be used for routine quality control investigations of the indicated formulations FVM & IVM.

White targeted chromatographic screening method of Molnupiravir and its metabolite with degradation kinetics characterization and in-silico toxicity.

SARS-CoV-2 virus triggered a worldwide crisis, with world nations putting up massive efforts to halt its spread. Molnupiravir (MLN) was the first oral, direct-acting antiviral drug approved for nasopharyngeal SARS-CoV-2 infection with favorable safety and tolerability profile. This study aims at determination of MLN and N4-hydroxycytidine (NHC), its main degradation product and its main metabolite, using sensitive, simple, and green HPLC-DAD method. Moreover, under different stress conditions using NaOH, HCl, neutral, H2O2, dry heat and sun light, the method was applied for MLN assay along with kinetics degradation investigation. The linearity range for MLN and NHC were both 0.1-100 µg/mL with LOD and LOQ of 0.013 & 0.043 and 0.003 & 0.011 µg/mL, for MLN and NHC, respectively. MLN was found to be extremely vulnerable to alkali hydrolysis compared with acid and dry heat degradation. In contrast, MLN was stable under conditions of oxidative, neutral, and sunlight-induced deterioration. Acid and alkali-induced degradation followed pseudo first-order kinetics model. In addition, LC-MS-UV was used to suggest the mechanism of the stress-induced degradation route and to characterize the eluted degradation products. Toxicities of both MLN and its degradation products were evaluated using ProTox-II and they were found to be negligibly harmful. The proposed HPLC-DAD was effectively used for the analysis of MLN in commercial pharmaceutical formulations. The proposed method for MLN determination after greenness and whiteness appraisal was found to be superior compared to the reported methods for MLN analysis.

Application of MEKC and UPLC with Fluorescence Detection for Simultaneous Determination of Amlodipine Besylate and Bisoprolol Fumarate.

OBJECTIVE: Two chromatographic methods were described for simultaneous determination of the antihypertensive drugs amlodipine besylate (AML) and bisoprolol fumarate (BIS). METHODS: Method I applies micellar electrokinetic capillary chromatography using a deactivated fused silica capillary (25 cm effective length × 50 µm internal diameter). The background electrolyte consisted of 0.01 M borate buffer (pH 9.2) containing 0.025 M sodium dodecyl sulphate and methanol in the ratio of 80:20 (v/v). Valsartan (VAL) was used as an internal standard. Diode array detector was set at 238, 224, and 210 nm for measuring AML, BIS, and VAL, respectively. Method II involves using ultra-performance liquid chromatography with fluorescence detection. Zorbax SB-C8 column (2.1 × 100 mm, 1.8 µm particle size) was used with isocratic elution of the mobile phase composed of 0.1% trifluoroacetic acid, acetonitrile, and methanol in the ratio of 55:35:10 (v/v) at a flow rate of 0.6 mL/min. Fluorescence detection was done using excitation wavelengths 230 and 370 nm and emission wavelengths 305 and 450 nm for BIS and AML, respectively. Validation parameters were carefully studied including linearity, ranges, precision, accuracy, robustness, detection, and quantification limits. RESULTS: Method I showed good linearity over the range 10-100 µg/mL for both dugs. Method II's linear ranges were 0.001-0.1 and 0.02-1 µg/mL for BIS and AML, respectively. CONCLUSION: The proposed methods were successfully validated and applied for assay of the studied drugs in their fixed-dose combination tablets. HIGHLIGHTS: To the best of our knowledge, this study suggests the first electro-chromatographic and LC with fluorescence detection methods for simultaneous determination of amlodipine and bisoprolol.

A novel HPLC-DAD method for simultaneous determination of febuxostat and diclofenac in biological samples: pharmacokinetic outcomes.

AIM: To develop a simple HPLC-DAD method for simultaneous determination of febuxostat (FEB) and diclofenac (DIC) in biological samples to assess pharmacokinetic outcomes of their coadministration. Methodology & results: Sample preparation was performed by liquid-liquid extraction. Drugs analysis was done on C18 column using methanol-formic acid pH 2.1 (76:24, v/v) as mobile phase and time-programmed UV detection. Lower limits of quantitation for FEB and DIC were 10 and 20 ng/ml, respectively. Baseline pharmacokinetics were similar to published data on either drug alone. Coadministration led to more than twofold increase in FEB Cmax and AUC together with a reduced hepatic uptake in rats. CONCLUSION: DIC interfered with initial distribution and terminal clearance of FEB potentially due to reduced FEB hepatic uptake.

Stability indicating HPLC-DAD method for analysis of Ketorolac binary and ternary mixtures in eye drops: Quantitative analysis in rabbit aqueous humor.

Ketorolac tromethamine (KTC) with phenylephrine hydrochloride (PHE) binary mixture (mixture 1) and their ternary mixture with chlorpheniramine maleate (CPM) (mixture 2) were analyzed using a validated HPLC-DAD method. The developed method was suitable for the in vitro as well as quantitative analysis of the targeted mixtures in rabbit aqueous humor. The analysis in dosage form (eye drops) was a stability indicating one at which drugs were separated from possible degradation products arising from different stress conditions (in vitro analysis). For analysis in aqueous humor, Guaifenesin (GUF) was used as internal standard and the method was validated according to FDA regulation for analysis in biological fluids. Agilent 5 HC-C18(2) 150×4.6mm was used as stationary phase with a gradient eluting solvent of 20mM phosphate buffer pH 4.6 containing 0.2% triethylamine and acetonitrile. The drugs were resolved with retention times of 2.41, 5.26, 7.92 and 9.64min for PHE, GUF, KTC and CPM, respectively. The method was sensitive and selective to analyze simultaneously the three drugs in presence of possible forced degradation products and dosage form excipients (in vitro analysis) and also with the internal standard, in presence of aqueous humor interferences (analysis in biological fluid), at a single wavelength (261nm). No extraction procedure was required for analysis in aqueous humor. The simplicity of the method emphasizes its capability to analyze the drugs in vivo (in rabbit aqueous humor) and in vitro (in pharmaceutical formulations).

Development and Validation of a High-Performance Thin-Layer Chromatographic Method for the Simultaneous Determination of Two Binary Mixtures Containing Ketorolac Tromethamine with Phenylephrine Hydrochloride and with Febuxostat.

A validated and highly selective high-performance thin-layer chromatography (HPTLC) method was developed for the determination of ketorolac tromethamine (KTC) with phenylephrine hydrochloride (PHE) (Mixture 1) and with febuxostat (FBX) (Mixture 2) in bulk drug and in combined dosage forms. The proposed method was based on HPTLC separation of the drugs followed by densitometric measurements of their spots at 273 and 320 nm for Mixtures 1 and 2, respectively. The separation was carried out on Merck HPTLC aluminum sheets of silica gel 60 F254 using chloroform-methanol-ammonia (7:3:0.1, v/v) and (7.5:2.5:0.1, v/v) as mobile phase for KTC/PHE and KTC/FBX mixtures, respectively. Linear regression lines were obtained over the concentration ranges 0.20-0.60 and 0.60-1.95 µg band(-1)for KTC and PHE (Mixture 1), respectively, and 0.10-1.00 and 0.25-2.50 µg band(-1) for KTC and FBX (Mixture 2), respectively, with correlation coefficients higher than 0.999. The method was successfully applied to the analysis of the two drugs in their synthetic mixtures and in their dosage forms. The mean percentage recoveries were in the range of 98-102%, and the RSD did not exceed 2%. The method was validated according to ICH guidelines and showed good performances in terms of linearity, sensitivity, precision, accuracy and stability.

New spectrofluorometric application for the determination of ternary mixtures of drugs.

A new spectrofluorometric method was developed for the determination of a ternary mixture of dexamethasone, dexchlorpheniramine maleate, and fluphenazine hydrochloride in dosage forms where the literature did not reveal any method for analysis of this mixture. The method was based on the use of the first and second derivatives of the ratio of the emission spectra with a zero-crossing technique. The ratio spectra were obtained by dividing the emission spectrum of the mixture by that of one of the components. The concentrations of the other components were then determined from their respective calibration graphs treated similarly. The method can resolve the spectral overlapping of the three components and was applied successfully for the determination of these drugs in synthetic mixtures and in commercial dosage forms.