Development of a surface plasmon resonance sensor using an optical fiber prepared by electroless displacement gold plating and its application to immunoassay.

A simple and low-cost method of fabricating an optical fiber for a surface plasmon resonance (SPR) sensor was proposed. The method is based on the electroless nickel plating and subsequent displacement gold plating of the core of the optical fiber. The thickness of the nickel and gold thin films deposited on the core of the optical fiber could be controlled by measuring the reflected light intensity from the tip of the optical fiber during the plating processes. The sensitivity and resolution of the SPR sensor with the fabricated optical fiber in the refractive index range from 1.333 to 1.348 were 1324.3 nm/RIU and 7.6 × 10-4 RIU, respectively. The developed SPR sensor was successfully used in the determination of immunoglobulin A (IgA) in human saliva. The IgA quantification results obtained by the SPR sensor were in excellent agreement with those obtained by conventional enzyme-linked immunosorbent assay using a 96-well microtiter plate.

Telomere length and urinary 8-hydroxy-2'-deoxyguanosine and essential trace element concentrations in female Japanese university students.

Telomere length is thought to be a biomarker of biological aging. This study examined whether telomere length was associated with urinary concentrations of 8-hydroxy-2'-deoxyguanosine (8-OHdG), a biomarker of oxidative stress, and antioxidative trace elements in 73 female Japanese university students (age: 19.2 ± 0.7 years). We quantified 8-OHdG and selenium in urine by liquid chromatography-mass spectrometry and inductively coupled plasma-mass spectrometry, respectively. Telomere length and urinary concentrations of other essential trace elements (molybdenum, cobalt, and chromium) that were previously measured in the same study participants, were used in this study. We used multiple linear regression analysis to examine the associations of telomere length with urinary 8-OHdG and essential trace element concentrations (covariates: urinary cotinine concentration, age, BMI, and drinking status). The geometric means (geometric standard deviation) of 8-OHdG and selenium were 3.4 (1.5) and 31 (1.3) µg/g creatinine, respectively. Telomere length was not associated with urinary 8-OHdG concentration, but was negatively associated with urinary selenium concentration. In conclusion, telomere length was not associated with urinary 8-OHdG concentration in the young women in this study. Longitudinal studies should be conducted to clarify the association between telomere shortening rate and oxidative stress level.

Development of an Automatic pH Adjustment Instrument for the Preparation of Analytical Samples Prior to Solid Phase Extraction.

An automatic pH adjustment instrument was developed for the preparation of analytical samples prior to solid phase extraction, which is widely used as a pretreatment technique for the separation of sample matrixes and preconcentration of elements for analysis. Real-time monitoring of the sample pH condition was performed by observing the light signal intensity of the pH-sensitive wavelength of the pH indicating reagent. A light of pH-insensitive wavelength was selected as the reference light to cancel the signal intensity variation of the pH-sensitive light due to the difference of pH indicating reagent concentration, possible difference in transparency of sample vessels, and minute fluctuation of the light source. The pH condition was elevated by automatic addition of ammonia solution using a nebulizer in the flow line of which an electromagnetic valve was equipped. Open and close operation of the electromagnetic valve was controlled based on the difference between the real-time pH condition and the target pH condition. The effectiveness of the instrument was confirmed by using various pH indicating reagents and by analyzing trace elements in a seawater certified reference material.

Cadmium Exposure and Blood Telomere Length in Female University Students in Japan.

Cadmium is a toxic metal found ubiquitously throughout the world. Our study evaluated whether cadmium exposure was associated with telomere length in 73 female university students. Determination of telomere length was performed by quantitative polymerase chain reaction using DNA in blood. Urinary cadmium concentration was measured by inductively coupled plasma mass spectrometry. The students' physiological attributes and lifestyle were surveyed by means of a self-administered questionnaire. The geometric mean of urinary cadmium concentration was 0.312 µg/g creatinine, which was lower than the levels previously reported for Japan. Urinary cadmium concentration was not significantly associated with telomere length, though the exposure level of the present subjects was similar to that of previous study subjects which found significantly negative associations. It is possible that other factors affected telomere length in this study population.

Investigation of adverse effect of coexisting aminopolycarboxylates on the determination of rare earth elements by ICP-MS after solid phase extraction using an iminodiacetate-based chelating-resin.

When iminodiacetic acid chelating-resin solid phase extraction (SPE) was used for the preconcentration of rare earth elements (REEs) in river water samples around sewage treatment plant (STP), low recovery values for heavy REEs were observed. In order to find out the reason for the low recovery, in the present paper, organic ligands in the STP effluent, which may compete with iminodiacetic acids, were analyzed by GC-NPD. It was found that EDTA was contained in the STP effluent at several-100 nM level and interfered with the adsorption of REEs, especially heavy REEs (present at pM level) on the chelating-resin due to the formation of stable complexes. Therefore, acid treatment was applied to decompose EDTA molecules. As a result of acid treatment with HNO3 and H2O2 at 170 °C for 4 h, all REEs were almost quantitatively recovered from the STP effluent with chelating-resin SPE with good reproducibility. After the acid treatment and subsequent 40-times preconcentration with SPE, all REEs in river water samples were precisely determined by ICP-MS at several-10 to sub pg mL-1 levels.

An in-syringe La-coprecipitation method for the preconcentration of oxo-anion forming elements in seawater prior to an ICP-MS measurement.

A lanthanum (La) coprecipitation method with low sample consumption was explored for the preconcentration of oxo-anion forming elements prior to a measurement by inductively coupled plasma mass spectrometry (ICP-MS). The preconcentration procedure was composed of two main steps: (1) the formation of a coprecipitate with the lowest possible La and (2) the redissolution of target analytes with minimal use of nitric acid, and the elimination of high concentration La from the analysis sample. Each step was performed in a 25 mL-volume syringe to reduce the sample consumption and to avoid contamination from the experimental environment. Various parameters, such as the concentration and volume of La added into the sample solution, the precipitation pH, the aging time, and the volume of HNO(3) were optimized to obtain good recoveries and high detection sensitivities for V, As, Sb, and W, which could be hardly recovered by solid-phase extraction using a chelating resin. The obtained method was evaluated through the analysis of seawater reference materials (CASS-4 and NASS-5). The recoveries exceeded 80%, and the observed values were in good agreement with the certified values.

Annual variations of the elemental concentrations of PM10 in ambient air of Nagoya City as determined by ICP-AES and ICP-MS.

PM10 samples were collected at an urban site of Nagoya City during September, 2003, to August, 2004, and annual variations of the concentrations of the elements in PM10 samples were examined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The annual concentration variations of ca. 30 elements in ambient air were in the range from sub-ng m(-3) to several microg m(-3). From an evaluation by the enrichment factors of the elements, elements such as Al, Ca, Fe, Mg, Ti, Mn, Ba, Sr, Ce, La, Nd, Co, Cs, and Pr, in PM10 samples were found to have originated mostly from natural sources, while the elements such as S, Zn, Pb, Cu, Ni, Sb, Sn, Cd, Bi, W, Tl, and In originated from anthropogenic emission sources. Furthermore, in seasonal variations of the elemental concentrations of PM10 samples in ambient air, the elements originated mostly from natural sources provided significantly high concentrations in spring during the "Kosa" period (the dust season from March to May). On the other hand, the elements mainly from anthropogenic emission sources provided relatively higher concentrations in autumn and winter, which may be explained by the fact that the urban atmospheric structure is stabilized by the temperature-inversion layer formed over the city in those seasons. In addition, all of the elements provided significantly low concentrations in the summer, due to the dilution effect of the oceanic winds as well as due to the convection of air mass up to the high levels.

Chemical characterization of airborne particulate matter in ambient air of Nagoya, Japan, as studied by the multielement determination with ICP-AES and ICP-MS.

The multielement determination of PM(10) (airborne particulate matter smaller than 10 microm) samples, which was collected by a high volume air sampler at the urban site of Nagoya City, was carried out by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The present analytical method was validated by analyzing urban particulate matter standard reference material of NIST SRM 1648. The analytical data for ca. 30 elements in PM(10) samples collected during a period from 8 September to 9 October, 2003, were obtained in the concentration range from sub-microg g(-1) to several-10 mg g(-1), but the data for 18 elements among ca. 30 elements were available for the characterization of PM(10) samples in ambient air, because of problems caused by the filter blanks. Then, the trends concerning the distributions of diverse elements in PM(10) samples were analyzed based on the enrichment factors and size distribution factors. The lithophile and siderophile elements were distributed more than 50% in coarse particle fraction (>2.1 microm), which was derived mainly from natural sources, such as soils and crustal minerals. On the other hand, chalcophile elements were distributed more than 50% in fine particle fraction (<2.1 microm), which was derived mostly from anthropogenic emission sources. The large enrichment of chalcophile elements in PM(10) samples as well as their mining influence factors (MIFs) suggested their wide use in industrial productions.

Multielement determination of trace metals in seawater by ICP-MS with aid of down-sized chelating resin-packed minicolumn for preconcentration.

The multielement determination of trace metals in seawater was carried out by inductively coupled plasma mass spectrometry (ICP-MS) with aid of a down-sized chelating resin-packed minicolumn for preconcentration. The down-sized chelating resin-packed minicolumn was constructed with two syringe filters (DISMIC 13HP and Millex-LH) and an iminodiacetate chelating resin (Chelex 100, 200-400mesh), with which trace metals in 50mL of original seawater sample were concentrated into 0.50mL of 2M nitric acid, and then 100-fold preconcentration of trace metals was achieved. Then, 0.50mL analysis solution was subjected to the multielement determination by ICP-MS equipped with a MicroMist nebulizer for micro-sampling introduction. The preconcentration and elution parameters such as the sample-loading flow rate, the amount of 1M ammonium acetate for elimination of matrix elements, and the amount of 2M nitric acid for eluting trace metals were optimized to obtain good recoveries and analytical detection limits for trace metals. The analytical results for V, Mn, Co, Ni, Cu, Zn, Mo, Cd, Pb, and U in three kinds of seawater certified reference materials (CRMs; CASS-3, NASS-4, and NASS-5) agreed well with their certified values. The observed values of rare earth elements (REEs) in the above seawater CRMs were also consistent with the reference values. Therefore, the compiled reference values for the concentrations of REEs in CASS-3, NASS-4, and NASS-5 were proposed based on the observed values and reference data for REEs in these CRMs.

Multielement determination of trace metals in river water (certified reference material, JSAC 0301-1) by high efficiency nebulization ICP-MS after 100-fold preconcentration with a chelating resin-packed minicolumn.

The determination of 34 trace metals in a river water certified reference material (CRM), i.e. JSAC 0301-1, which was issued by the Japan Society for Analytical Chemistry in January 2004, was performed by ICP-MS with a high efficiency nebulizer after preconcentration with a laboratory-made chelating resin-packed minicolumn, with which trace metals were concentrated 100-fold from 50 mL of a river water sample to 0.5 mL of the final analysis solution. Trace metals in JSAC 0301-1 were observed in the concentration range from 19 microg L(-1) of Al to 0.000053 microg L(-1) of Bi. It was found that most of the concentrations of trace metals, including rare earth elements (REEs), in JSAC 0301-1 were lower than those in JAC 0031, which was also a previously issued CRM prepared with water from the same river as that of JSAC 0301-1. The low concentrations of trace metals in JSAC 0301-1 might be attributed to the fact that there was a heavy rain before collecting the original water sample to prepare the present CRM. Furthermore, the REE distribution patterns of JSAC 0301-1, JAC 0031 and the average values of river water samples in Japan were parallel to each other. These results indicate that the distributions of REEs in JSAC 0301-1 and JAC 0031 were the typical ones of river water samples in Japan.

Distributions of major-to-ultratrace elements among the particulate and dissolved fractions in natural water as studied by ICP-AES and ICP-MS after sequential fractionation.

In order to elucidate the distributions of the elements among the particulate and dissolved fractions in pond water, major-to-ultratrace elements in different sizes of particles as well as in the filtrate passed through the 0.05 microm filter were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The different sizes of particle samples (ca. 100-300 microg each) were collected on the membrane filters with pore sizes of 10, 3.0, 1.2, 0.4, 0.2 and 0.05 microm, respectively, by sequential fractionation. As a result, about 40 elements in different sizes of particles could be determined by ICP-AES and ICP-MS, after acid digestion using HNO3/HF/HClO4. Then, the fractional distribution factors of major-to-ultratrace elements among the particulate and dissolved fractions were estimated from the analytical results. The total contents of Al, Fe, Ti, REEs (rare earth elements), Bi, Pb and Ag in the particulate fractions (larger than 0.05 microm) were more than 80-90%, while those of Ca, Sr, Cs, W, Ba, Mn and Co in the dissolved fraction, which corresponded to the filtrate passed through the 0.05 microm membrane filter, were more than 80%. It was further found that the fractional distributions of Cu and Zn in the dissolved fraction were ca. 50%. In addition, the enrichment factors (EFs) of the elements in the particulate fractions with particle sizes of 3.0-10 microm and 0.05-0.2 microm were estimated to elucidate their geochemical characteristics in natural water.

Partitionings and kinetic behaviors of major-to-ultratrace elements between industrial waste incineration fly and bottom ashes as studied by ICP-AES and ICP-MS.

The partitionings of major-to-ultratrace elements between industrial waste incineration fly ash (IWIFA) and industrial waste incineration bottom ash (IWIBA) in industrial waste incinerators were investigated by measuring their concentration distributions, where the incineration ash samples were collected from three different types of industrial waste incinerators. The concentrations of the elements in the incineration ash samples were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). As a result, ca. 40 elements in the concentration range from mg g(-1) to sub-microg g(-1) could be determined in both IWIFA and IWIBA samples. The concentration ratios of CF/CB (CF, concentration in fly ash; CB, concentration in bottom ash) for analyte elements were used to evaluate the partitionings of the elements between fly and bottom ashes. Then, the correlations between the CF/CB values of the elements and the dissociation energies of their monoxides were examined to evaluate the kinetic behaviors of the elements during the incineration processes. It was found that lithophile and siderophile elements, which have a large affinity with oxygen, were almost equally distributed between fly and bottom ashes, regardless of the dissociation energies of their monoxides. On the other hand, chalcophile elements with rather large volatility provided different behaviors; the elements with the smaller dissociation energies of monoxides were more partitioned in fly ashes than those with the larger ones.