ABSTRACT
In this report, we describe a case involving a 34-year-old woman who showed good treatment outcomes with long-term stability after multidisciplinary treatment for unilateral cleft lip and palate (CLP), maxillary hypoplasia, severe maxillary arch constriction, severe occlusal collapse, and gingival recession. A comprehensive treatment approach was developed with maximum consideration of strong scar constriction and gingival recession; it included minimum maxillary arch expansion, maxillary advancement by distraction osteogenesis using an internal distraction device, and mandibular setback using sagittal split ramus osteotomy. Her post-treatment records demonstrated a balanced facial profile and occlusion with improved facial symmetry. The patient's profile was dramatically improved, with reduced upper lip retrusion and lower lip protrusion as a result of the maxillary advancement and mandibular setback, respectively. Although gingival recession showed a slight increase, tooth mobility was within the normal physiological range. No tooth hyperesthesia was observed after treatment. There was negligible osseous relapse, and the occlusion remained stable after 5 years of post-treatment retention. Our findings suggest that such multidisciplinary approaches for the treatment of CLP with gingival recession and occlusal collapse help in improving occlusion and facial esthetics without the need for prostheses such as dental implants or bridges; in addition, the results show long-term post-treatment stability.
ABSTRACT
Facial asymmetry can be caused by unilateral condylar hyperplasia. In such cases, it may be difficult to achieve symmetry since there is dentoalveolar compensation on the affected side, and the occlusal cant does not correspond to the frontal mandibular deviation. In the case presented, surgical orthodontic treatment and orthognathic surgery planning was accomplished for a patient with facial asymmetry due to condylar hyperplasia. The surgical plan was devised with particular attention to the severe dentoalveolar compensation. In this case, prior to the two-jaw surgery, the occlusal cant and frontal mandibular plane inclination was corrected through impaction of the left molar region by segmental osteotomy. Facial asymmetry and severe dentoalveolar compensation were successfully corrected after a unilateral segmental osteotomy and two-jaw surgery, resulting in a stable occlusal relationship and facial symmetry as well as good jaw function. Collaboration between the orthodontists and maxillofacial surgeons was essential for the successful treatment of the patient.
Subject(s)
Facial Asymmetry/therapy , Mandibular Condyle/pathology , Adult , Cephalometry , Facial Asymmetry/diagnostic imaging , Facial Asymmetry/pathology , Facial Asymmetry/surgery , Female , Humans , Hyperplasia , Malocclusion/pathology , Malocclusion/therapy , Mandibular Condyle/diagnostic imaging , Mandibular Condyle/surgery , Mandibular Osteotomy , Patient Care Team , Photography, Dental , Radiography , Radiography, PanoramicABSTRACT
We report the successful treatment of a woman aged 25 years 3 months with bilateral cleft lip and palate. She had a protruded premaxilla, collapsed posterior segments, wide alveolar defects with oronasal fistulae, a congenital missing tooth, and severe facial asymmetry with a transverse occlusal cant. The comprehensive treatment approach included (1) premaxillary osteotomy combined with alveolar bone grafting to reposition the premaxilla and minimize the wide alveolar defects, (2) autotransplantation of a tooth with complete root formation to the grafted bone region to restore the missing tooth without a prosthesis such as a dental implant or bridge, and (3) 2-jaw surgery to improve facial asymmetry. The premaxillary osteotomy was managed orthodontically, in combination with bone grafting. The results suggest that surgical orthodontic treatment with tooth autotransplantation might be useful to improve the occlusion and facial esthetics without prosthetics.
Subject(s)
Autografts/transplantation , Bicuspid/transplantation , Cleft Lip/surgery , Cleft Palate/surgery , Maxillary Osteotomy/methods , Orthognathic Surgical Procedures/methods , Adult , Alveolar Bone Grafting/methods , Anodontia/surgery , Cephalometry/methods , Facial Asymmetry/surgery , Female , Follow-Up Studies , Humans , Incisor/abnormalities , Malocclusion, Angle Class III/surgery , Malocclusion, Angle Class III/therapy , Nose Diseases/surgery , Oral Fistula/surgery , Osteotomy, Le Fort/methods , Osteotomy, Sagittal Split Ramus/methods , Palatal Expansion Technique , Patient Care Planning , Respiratory Tract Fistula/surgery , Tomography, X-Ray Computed/methods , Treatment OutcomeABSTRACT
OBJECTIVE: The purpose of this cephalometric study was to compare the actual movement with the planned movement of the maxilla by using internal maxillary distraction in cleft lip and palate patients. PATIENTS: Twelve patients, including eight with unilateral and four with bilateral cleft lip and palate, underwent maxillary advancement with internal maxillary distractors. MAIN OUTCOME MEASURES: Lateral cephalometric radiographs obtained preoperatively, predistraction, and postdistraction were used for analysis. The movement of the maxilla, angular change of the internal devices and rotation of the mandible were measured at each stage, and the planned vector of advancement predicted from the placement vector of the distractors was compared with the actual vector. RESULTS: Internal maxillary distractors were rotated in a clockwise direction during the distraction period. The angular change of the distractors was 7.7°. The amount of actual advancement at anterior nasal spine with distraction was 6.3 mm, which represented about 70% of the distance of activation of distraction. The actual advanced vector at anterior nasal spine was 9.7° smaller than the planned vector. The mandible underwent a clockwise rotation of 3.5°. CONCLUSION: In the internal distraction technique, the maxilla was advanced inferiorly to the planned vector and with a slight clockwise rotation. These results are useful for surgical planning when using internal distractors.
Subject(s)
Cleft Palate/surgery , Maxilla/surgery , Osteogenesis, Distraction/methods , Adolescent , Adult , Cephalometry , Cleft Palate/diagnostic imaging , Female , Humans , Male , Maxilla/diagnostic imaging , Osteogenesis, Distraction/instrumentation , Osteotomy, Le Fort , Radiography , Treatment OutcomeABSTRACT
Swallowing is a reflex that receives sensory information from the peripheral nerves and from the cerebral cortex. The aim of the present study was to investigate whether the sensory input from anterior teeth affects the functional characteristics of tongue pressure applied against the hard palate during swallowing. Subjects were eight healthy volunteers. Tongue pressure against the hard palate during swallowing 10 ml of water was measured under two conditions: preanesthesia and postanesthesia of anterior teeth. The sensory deprivation of anterior teeth was performed by periodontal anesthesia. Tongue pressure was measured using a multiple tactile array sensor (MTAS) with eight sensor channels arranged in tandem. The duration of the tongue pressure production during swallowing was increased under periodontal anesthesia. In addition, the maximum tongue pressure and the pressure integral during swallowing were decreased under periodontal anesthesia, in particular at the anterior region of the palate. These findings indicate that sensory input from anterior teeth, including periodontal mechanoreceptor, affects the deglutitive tongue pressure and duration and provides peripheral feedback to modulate some aspects of the neurophysiologic control of deglutitive tongue movement.
Subject(s)
Deglutition Disorders/physiopathology , Deglutition , Neurons, Afferent/physiology , Tongue/physiopathology , Tooth , Adult , Anesthesia, Local , Female , Humans , Male , Pilot ProjectsABSTRACT
OBJECTIVE: To examine the effect of migration of the germ of the lateral incisor into the bone for eruption factors on bone bridge resorption. METHODS: Twenty-five subjects who underwent secondary alveolar bone graft were enrolled. The volume of the alveolar bone grafts immediately after the operation (V1), bone bridge formation 6 months postoperatively (V2), and tooth (teeth) migration into the bone bridge (Vt) were measured using a computed tomography (CT) image analyzer. Based upon these measurements, the following points were examined: (1) the correlation between the tooth-occupied ratio (Rt = Vt/V2 x 100) and the ratio of bone bridge resorption (Rv = (V1 - V2)/ V1 x 100); and (2) comparison of the tooth-occupied ratio (Rt) and the ratio of bone bridge resorption (Rv) between the groups with and without the germ of the lateral incisor. RESULTS: A significant negative correlation was found between Rv and Rt (p < .001). Comparison of Rv and Rt between the groups with and without a germ of the lateral incisor revealed that both indices were significantly higher in the former group than the latter one (p < .05). CONCLUSION: In cleft lip and palate patients with a germ of the lateral incisor, it is beneficial to carry out secondary bone grafting to the alveolar cleft at the age of 5 to 7 years, preceding eruption of the canine, in order to form a good bone bridge that will facilitate eruption of the lateral incisor and subsequent normal dentition and occlusion.
Subject(s)
Alveolar Process/surgery , Alveolar Ridge Augmentation/methods , Bone Transplantation/methods , Cleft Lip/surgery , Cleft Palate/surgery , Tooth Germ/physiology , Alveolar Process/diagnostic imaging , Child , Child, Preschool , Female , Humans , Image Processing, Computer-Assisted/methods , Imaging, Three-Dimensional/instrumentation , Imaging, Three-Dimensional/methods , Incisor , Male , Osseointegration/physiology , Prospective Studies , Tomography, X-Ray Computed , Tooth Germ/diagnostic imaging , Tooth, Unerupted/diagnostic imaging , Treatment OutcomeABSTRACT
OBJECTIVE: This article reports a case of bilateral cleft lip and alveolus (BCLA) for which excessive rapid palatal expansion with a Latham appliance was performed for preoperative alignment of the protruded premaxilla. Postoperative changes of maxillary width were investigated with serial plaster casts. PATIENT AND RESULTS: A 3-month-old girl presented with complete BCLA in which the premaxilla was markedly protruded. Preoperative alignment of the protruded premaxilla with a Latham appliance was planned to facilitate primary lip repair. The appliance was placed when the patient was 4.5 months old. The necessary palatal expansion was estimated to be 7.0 mm in order to move the premaxilla backward into the ideal position. After palatal expansion and posterior repositioning of the protruded premaxilla, the primary operation, including cheiloplasty and gingivoperiosteoplasty, was performed when the patient was 7 months old. Excessive maxillary expansion might be a cause of transverse maxillomandibular discrepancy. Measurement with serial plaster casts demonstrated that maxillary widths increased from 42.3 mm pretreatment to 49.0 mm after orthopedic treatment but relapsed markedly to 43.5 mm at 3 months after the primary operation. Therefore, the net change of maxillary widths was only 1.2 mm. After alignment of the protruded premaxilla, tension-free soft tissue repairs were performed, and a harmonious alveolar arch was obtained without change in maxillary width. CONCLUSION: These results indicate that this method is useful for preoperative management of BCLA with protruded premaxilla.