ABSTRACT
Non-line-of-sight (NLOS) imaging aims to reconstruct the three-dimensional hidden scenes by using time-of-flight photon information after multiple diffuse reflections. The under-sampled scanning data can facilitate fast imaging. However, the resulting reconstruction problem becomes a serious ill-posed inverse problem, the solution of which is highly likely to be degraded due to noises and distortions. In this paper, we propose novel NLOS reconstruction models based on curvature regularization, i.e., the object-domain curvature regularization model and the dual (signal and object)-domain curvature regularization model. In what follows, we develop efficient optimization algorithms relying on the alternating direction method of multipliers (ADMM) with the backtracking stepsize rule, for which all solvers can be implemented on GPUs. We evaluate the proposed algorithms on both synthetic and real datasets, which achieve state-of-the-art performance, especially in the compressed sensing setting. Based on GPU computing, our algorithm is the most effective among iterative methods, balancing reconstruction quality and computational time. All our codes and data are available at https://github.com/Duanlab123/CurvNLOS.
ABSTRACT
Algal blooms have been increasingly prevalent in recent years, especially in lakes and reservoirs; their accurate prediction is essential for preserving water quality. In this study, the observed chlorophyll a (chl-a) levels were assimilated into the Environmental Fluid Dynamics Code (EFDC) of algal bloom dynamics by using a particle filter (PF), and the state variables of water quality and model parameters were simultaneously updated to achieve enhanced algal bloom predictive performance. The developed data assimilation system for algal blooms was applied to Xiangxi Bay (XXB) in the Three Gorges Reservoir (TGR). The results show that the ensemble mean accuracy and reliability of the confidence intervals of the predicted state variables, including chl-a and indirectly updated phosphate (PO4), ammonium (NH4), and nitrate (NO3) levels, were considerably improved after PF assimilation. Thus, PF assimilation is an effective tool for the dynamic correction of parameters to represent their inherent variations. Increased assimilation frequency can effectively suppress the accumulation of model errors; therefore, the use of high-frequency water quality data for assimilation is recommended to ensure more accurate and reliable algal bloom prediction.
Subject(s)
Eutrophication , Rivers , Chlorophyll A , Reproducibility of Results , Water Quality , China , Environmental MonitoringABSTRACT
The long-standing crisis of soil salinization and alkalization poses a significant challenge to global agricultural development. High soil salinity-alkalinity, water dispersion, and nutrient loss present major hurdles to soil improvement. Novel environmentally friendly gels have demonstrated excellent water retention and slow-release capabilities in agricultural enhancement. However, their application for improving saline-alkali soil is both scarce and competitive. This study proposes a new strategy for regulating saline-alkali soil using gel-coated controlled-release soil modifiers (CWR-SRMs), where radical-polymerized gels are embedded on the surface of composite gel beads through spray coating. Characterization and performance analysis reveal that the three-dimensional spatial network structure rich in hydrophilic groups exhibits good thermal stability (first-stage weight loss temperature of 257.7 °C in thermogravimetric analysis) and encapsulation efficiency for fulvic acidpotassium (FA-K), which can enhance soil quality in saline-alkali environments. The molecular chain relaxation under saline-alkali conditions promotes a synergistic effect of swelling and slow release, endowing it with qualifications as a water reservoir, Ca2+ source unit, and slow-release body. The results of a 6 weeks incubation experiment on 0-20 cm saline-alkaline soil with different application gradients showed that the gradient content had a significant effect on the soil improvement effect. Specifically, the T2 (the dosage accounted for 1 % of soil mass) treatment significantly increases water retention (30 % ~ 90 %), and nutrient levels (30 % ~ 50 %), while significantly decreasing soil sodium colloid content (30 % ~ 60 %) and soil pH (10 % ~ 15 %). Furthermore, PCA analysis indicates that the addition of 1 % CWR-SRMs as amendments can significantly adjust the negative aspects of soil salinity and alkalinity. This highlights the excellent applicability of CWR-SRMs in improving saline-alkali agricultural ecosystems, demonstrating the potential value of novel environmentally friendly gels as an alternative solution for soil challenges persistently affected by adverse salinity and alkalinity.
ABSTRACT
A hydrothermal method was used to synthesize two highly stable Zn(II) metal-organic frameworks (MOFs), namely, [Zn2(L)2(HIPA)]n (1) and [Zn9(L)6(BTEC)3(H2O)4·6H2O]n (2) (HL = 3-amino-1H-1,2,4-triazole, H2HIPA = 5-hydroxyisophthalic acid, H4BTEC = benzene-1,2,4,5-tetracarboxylic acid). The physicochemical properties of 1 and 2 were characterized using a range of analytical techniques. The scanning electron microscopy images confirmed the stability of the MOFs under heating at 120 °C for 12 h. Following their preparation, the two MOFs were used as catalysts in the grafting of poly(ε-caprolactone) on wood nanofibers (WNFs) by means of a homogeneous ring-opening polymerization protocol in an ionic liquid. The grafting ratio achieved using catalyst 1 was higher than that achieved for catalyst 2, wherein a maximum of 92.43% was obtained using the former. Under comparable reaction conditions, the grafting ratio of 1 was found to be significantly higher than those achieved using 4-dimethylamino pyridine, Sn(Oct)2, and UiO-67 catalysts. In addition, fluorescence emission was detected from the residual catalysts present in the products. The calculated electrostatic potentials and average local ionization energies indicated that the grafting of ε-caprolactone on the WNFs follows a "coordination-insertion" mechanism. Overall, these two new and efficient MOF catalysts have the potential to replace highly toxic traditional catalysts in polymerization reactions. The grafted cellulose material with fluorescence emission may also be suitable for use in biomedical applications.
ABSTRACT
Copper and zinc are toxic heavy metals in soils that require development of feasible strategies for remediation of contaminated soils around the mine areas. In this study, the processing conditions and mechanisms of immobilization and bioleaching for remediation of highly contaminated soils with heavy metals are investigated. Soil remediation is carried out using a bioleaching-immobilization bipolar method. The results show that LSE03 bacteria provide efficient leaching result and immobilization on Cu2+ and Zn2+. Among the bacterial metabolites, cis, cis-muconic acid and isovaleric acid play major roles in the bioleaching process. The bacterial extracellular polymeric substances are rich in a variety of organic acids that show a significant decrease in content after the adsorption process, indicating that all of these substances are involved in the binding of heavy metals. Characterization of the endophytes and immobilizing agents with FTIR, TEM-mapping, and XPS techniques reveal the ability of both bacteria and composites to adsorb Cu-Zn as well as the main functional groups of -OH, -COOH, -PO43-, and -NH. According to the heavy metals species analyses, competitive adsorption experiments, and bioleaching desorption experiments, it is planned to carry out the bipolar remediation of contaminated soil through immobilization followed by bioleaching process. After bipolar remediation processing, 97.923% and 96.387% of available Cu and Zn are respectively removed. Soils fertility significantly increases in all cases. Our study provides a green, practical, and environmentally friendly treatment method for soils contaminated with high concentrations of heavy metals.
Subject(s)
Metals, Heavy , Soil Pollutants , Zinc/analysis , Copper/chemistry , Endophytes , Soil/chemistry , Metals, Heavy/analysis , Organic Chemicals , Hydroxyapatites , Soil Pollutants/analysisABSTRACT
In this study, banana cellulose nanofibres (BNCFs) were prepared using waste banana stems. A novel two-dimensional (2D) Zn-MOF was synthesized using 5-(1-hydro-imidazolyl) isophthalic acid as the ligand. The results of the X-ray diffraction, thermogravimetry, and scanning electron microscopy analyses confirmed the stability of Zn-MOF. Thus, Zn-MOF was used to catalyze BNCFs grafted with poly(ε-caprolactone) (ε-CL) (BGCL) by homogeneous ring-opening polymerization in ionic liquid. The grafting ratio of the BGCL prepared by Zn-MOF reached 84.12 %, which was 10.03% higher than that catalyzed by 4-dimethylamino pyridine which was the state-of-the-art catalyst for this reaction. The banana cellulose nanofibres grafted with ε-CL reactions followed the coordination-insertion mechanism, which was confirmed by the theoretical calculations using the Materials Studio software. The cytotoxicity results indicated that BGCL was not only non-toxic to Hela cells but also promoted Hela cell growth within a certain concentration range. Therefore, this study demonstrated the promising potential of BGCL for biomedical applications, and the high efficiency, non-toxicity, and stability of Zn-MOF as the catalyst. Further, this will provide a theoretical basis for the application of MOFs as catalysts in polymerization reactions.