Inhibitory activity of some short-chain aliphatic aldehydes on pheromone and ammonium carbonate-mediated attraction in olive fruit fly, Bactrocera oleae.

BACKGROUND: The olive fruit fly (OFF), Bactrocera oleae (Rossi), is the main insect pest of olive trees worldwide. Legislation limits to the use of some synthetic larvicidal insecticides is leading to the development of new control options for preventive control of adult flies. In the present study, the biological activity of four short-chain aliphatic aldehydes, namely hexanal, (E)-2-hexenal, heptanal and (E)-2-heptenal, previously reported as repellents to the OFF adults was investigated. RESULTS: Electroantennography (EAG) recordings showed that antennae of OFF males and females are able to perceive the test compounds in a wide range of doses. In field trapping experiments, reservoir-type polypropylene (PP) membrane dispensers loaded with individual compounds did not elicit a significant attraction of OFF males and females. On the contrary, a significant reduction of male catches was noticed when sex pheromone dispensers and PP membrane dispensers, loaded with one of the test compounds, were applied on the same white sticky traps ≈20 cm apart. Likewise, male and female catches in yellow sticky traps baited with ammonium carbonate (AC) dispensers as food attractant were significantly reduced by the presence of PP membrane dispensers of individual aliphatic aldehydes on the same traps. In small plots control trials, solid formulations of the four aldehydes into a bentonite clay support induced a significant reduction of the OFF active infestation mainly when C6 and C7 aldehyde-activated bentonites were used. CONCLUSION: Short-chain aliphatic aldehydes showed inhibitory effects on sex pheromone and food attractant-mediated attraction of OFF. Results of field trials suggest potential of short-chain aliphatic aldehydes to develop new semiochemical-based OFF control options. © 2024 Society of Chemical Industry.

Aldehyde-containing clays: a sustainable approach against the olive tree pest, Bactrocera oleae.

A set of organic/inorganic layered materials was obtained by functionalizing a montmorillonite-containing bentonite natural clay with linear aliphatic C6 or C7 aldehydes through a cost-effective and technologically simple incipient-wetness deposition method. The solids were investigated by means of a multi-technique approach (X-ray powder diffraction, XRPD, scanning electron microscopy, SEM, Fourier-transform infrared spectroscopy, FT-IR, thermogravimetric analysis, TGA, elemental analysis and solid-state nuclear magnetic resonance, ssNMR) to clarify the nature of the deposited organic species and the mode of interaction between the aldehyde and the clay. Since both natural clays and short-chain linear aldehydes find application as alternative strategies in the control of the olive fruit fly, Bactrocera oleae, the hybrid layered materials were tested under real-life conditions and their insect-inhibiting capability was evaluated in open-field trials on olive tree orchards in Tuscany, Central Italy. Specific tests were conducted to evaluate the resistance of the solids to weathering and their capability to provide a constant and long-lasting release of the bioactive ingredient. Aldehyde-containing bentonite clays have shown promising performance in controlling B. oleae infestation (with up to 86-95% reduction of affected olive fruits) in open-field trials across two years in two locations with different pedological and meteo-climatic characteristics.

The Control of the Coordination Chemistry for the Genesis of Heterogeneous Catalytically Active Sites in Oxidation Reactions.

This Review provides a summary of the use and the role of coordination complexes as precursors for the generation of heterogeneous catalysts for oxidation reactions of interest for fine chemical synthesis. Specific attention is paid to the comprehension of phenomena explaining the formation of active sites in heterogeneous catalysts. Different families of coordination precursors are considered. For each example, a brief critical description of the synthesis, characterization, and catalytic performance is reported. Special attention is paid to the chemical environment of the first coordination sphere of the active metal centre. The catalysts obtained by heterogenization, grafting, or anchoring of homogeneous catalysts can therefore exhibit enhanced catalytic performance by merging advantages of both homogeneous and heterogeneous systems. The deposition of coordination complexes over a preformed support is indeed a conceptually versatile strategy to design novel catalysts with tuned and controlled properties.

Application of NMR relaxometry for real-time monitoring of the removal of metal ions from water by synthetic clays.

The removal of paramagnetic metal ions with different charges and ionic radii (i.e. Gd3+, Cu2+, and Co2+) from aqueous solutions was carried out by using a Na+-exchanged synthetic saponite clay. Saponite, composed of sub-micrometer particles and characterized by high cation-exchange capacity, was prepared through a classical low-cost hydrothermal approach. The metal ion uptake tests were performed in water at pH = 5.5 and 3.0, and the capture process was monitored in real time by 1H-NMR relaxometry. The experimental data were confirmed by the conventional ICP-OES technique. Details of the uptake process kinetics were extrapolated from the NMR analyses as well. Saponite showed good sorption capacity for all selected metal ions. The regeneration of the solid sorbent after metal uptake was also analysed, obtaining encouraging results.

Bifunctional Europium(III) and Niobium(V)-Containing Saponite Clays for the Simultaneous Optical Detection and Catalytic Oxidative Abatement of Blister Chemical Warfare Agents.

For the first time, the co-presence in the saponite structure of luminescent EuIII and catalytic NbV metal sites was exploited for the simultaneous detection and catalytic abatement of sulfur-containing blister chemical warfare agents. Metal centers were introduced in structural positions of the saponite (in the interlayer space or inside the inorganic framework) following two different synthetic methodologies. The functionalized saponites were able to reveal the presence of a sulfur mustard simulant (2-chloroethyl)ethyl sulfide (CEES) after few seconds of contact time and more than 80 % of the substrate was catalytically decomposed after 24 h in the presence of aqueous hydrogen peroxide.

Inactivation of SARS-CoV-2 in the Liquid Phase: Are Aqueous Hydrogen Peroxide and Sodium Percarbonate Efficient Decontamination Agents?

A diluted 3% w/w hydrogen peroxide solution acidified to pH 2.5 by adding citric acid inactivated SARS-CoV-2 virus by more than 4 orders of magnitude in 5 min. After a contact time of 15 min, no viral replication was detected. Aqueous solutions of sodium percarbonate inactivated coronavirus by >3 log10 diminution in 15 min. Conversely, H2O2 solutions with no additives displayed a scarce virucidal activity (1.1 log10 diminution in 5 min), confirming that a pH-modifying ingredient is necessary to have a H2O2-based disinfectant active against the novel coronavirus.

More Efficient Prussian Blue Nanoparticles for an Improved Caesium Decontamination from Aqueous Solutions and Biological Fluids.

Any release of radioactive cesium-137, due to unintentional accidents in nuclear plants, represents a dangerous threat for human health and the environment. Prussian blue has been widely studied and used as an antidote for humans exposed to acute internal contamination by Cs-137, due to its ability to act as a selective adsorption agent and to its negligible toxicity. In the present work, the synthesis protocol has been revisited avoiding the use of organic solvents to obtain Prussian blue nanoparticles with morphological and textural properties, which positively influence its Cs+ binding capacity compared to a commercially available Prussian blue sample. The reduction of the particle size and the increase in the specific surface area and pore volume values compared to the commercial Prussian blue reference led to a more rapid uptake of caesium in simulated enteric fluid solution (+35% after 1 h of contact). Then, after 24 h of contact, both solids were able to remove >98% of the initial Cs+ content. The Prussian blue nanoparticles showed a weak inhibition of the bacterial luminescence in the aqueous phase and no chronic detrimental toxic effects.

Surface organometallic chemistry in heterogeneous catalysis.

The broad challenges of energy and environment have become a main focus of research efforts to develop more active and selective catalytic systems for key chemical transformations. Surface organometallic chemistry (SOMC) is an established concept, associated with specific tools, for the design, preparation and characterization of well-defined single-site catalysts. The objective is to enter a catalytic cycle through a presumed catalytic intermediate prepared from organometallic or coordination compounds to generate well defined surface organometallic fragments (SOMFs) or surface coordination fragments (SCFs). These notions are the basis of the "catalysis by design" strategy ("structure-activity" relationship) in which a better understanding of the mechanistic aspects of the catalytic process led to the improvement of catalyst performances. In this review the application of SOMC strategy for the design and preparation of catalysts for industrially relevant processes that are crucial to the energy and environment is discussed. In particular, the focus will be on the conversion of energy-related feedstocks, such as methane and higher alkanes that are primary products of the oil and gas industry, and of their product of combustion, CO2, whose efficient capture and conversion is currently indicated as a top priority for the environment. Among the main topics related to energy and environment, catalytic oxidation is also considered as a key subject of this review.

Niobium(V) saponite clay for the catalytic oxidative abatement of chemical warfare agents.

A Nb(V)-containing saponite clay was designed to selectively transform toxic organosulfur chemical warfare agents (CWAs) under extremely mild conditions into nontoxic products with reduced environmental impact. Thanks to the insertion of Nb(V) sites within the saponite framework, a bifunctional catalyst with strong oxidizing and acid properties was obtained. Remarkable activity and high selectivity were observed for the oxidative abatement of (2-chloroethyl)ethyl sulfide (CEES), a simulant of sulfur mustard, at room temperature with aqueous hydrogen peroxide. This performance was significantly better compared to a conventional commercial decontamination powder.

Steric environment around acetylcholine head groups of bolaamphiphilic nanovesicles influences the release rate of encapsulated compounds.

Two bolaamphiphilic compounds with identical acetylcholine (ACh) head groups, but with different lengths of an alkyl chain pendant adjacent to the head group, as well as differences between their hydrophobic skeleton, were investigated for their ability to self-assemble into vesicles that release their encapsulated content upon hydrolysis of their head groups by acetylcholinesterase (AChE). One of these bolaamphiphiles, synthesized from vernolic acid, has an alkyl chain pendant of five methylene groups, while the other, synthesized from oleic acid, has an alkyl chain pendant of eight methylene groups. Both bolaamphiphiles formed stable spherical vesicles with a diameter of about 130 nm. The ACh head groups of both bolaamphiphiles were hydrolyzed by AChE, but the hydrolysis rate was significantly faster for the bolaamphiphile with the shorter aliphatic chain pendant. Likewise, upon exposure to AChE, vesicles made from the bolaamphiphile with the shorter alkyl chain pendant released their encapsulated content faster than vesicles made from the bolaamphiphile with the longer alkyl chain pendant. Our results suggest that the steric environment around the ACh head group of bolaamphiphiles is a major factor affecting the hydrolysis rate of the head groups by AChE. Attaching an alkyl chain to the bolaamphiphile near the ACh head group allows self-assembled vesicles to form with a controlled release rate of the encapsulated materials, whereas shorter alkyl chains enable a faster head group hydrolysis, and consequently faster release, than longer alkyl chains. This principle may be implemented in the design of bolaamphiphiles for the formation of vesicles for drug delivery with desired controlled release rates.

Niobium-silica catalysts for the selective epoxidation of cyclic alkenes: the generation of the active site by grafting niobocene dichloride.

Niobium-containing silica materials obtained by deposition via liquid-phase grafting or dry impregnation of niobocene(iv) dichloride are active and selective catalysts in the epoxidation of alkenes in the presence of aqueous hydrogen peroxide. The generation of the catalytically-active Nb species was followed step-by-step, and investigated using a combined DR-UV-Vis, NIR, Raman, XRD, XANES and EXAFS analyses. At the end of the grafting procedure, the nature of the surface active species can be described as an oxo-Nb(v) site, tripodally grafted onto the silica surface in close proximity to other Nb(v) centres. The liquid-phase methodology provides a better dispersion of the metal sites onto the siliceous support than the dry-impregnation approach. The niobium-silica catalysts were then tested in the epoxidation of cyclohexene and 1-methylcyclohexene, as model substrates.

Acid/vanadium-containing saponite for the conversion of propene into coke: potential flame-retardant filler for nanocomposite materials.

Vanadium-containing saponite samples were synthesized in a one-pot synthetic procedure with the aim of preparing samples for potential application as fillers for polymeric composites. These vanadium-modified materials were prepared from an acid support by adopting a synthetic strategy that allowed us to introduce isolated structural V species (H/V-SAP). The physicochemical properties of these materials were investigated by XRD analysis and by DR-UV/Vis and FTIR spectroscopy of CO that was adsorbed at 100 K; these data were compared to those of a V-modified saponite material that did not contain any Brønsted acid sites (Na/V-SAP). The surface-acid properties of both samples (together with the fully acidic H-SAP material and the Na-SAP solid) were studied in the catalytic isomerization of α-pinene oxide. The V-containing solids were tested in the oxidative dehydrogenation reaction of propene to evaluate their potential use as flame-retardant fillers for polymer composites. The effect of tuning the presence of Lewis/Brønsted acid sites was carefully studied. The V-containing saponite sample that contained a marked presence of Brønsted acid sites showed the most interesting performance in the oxidative dehydrogenation (ODH) reactions because they produced coke, even at 773 K. The catalytic data presented herein indicate that the H/V-SAP material is potentially active as a flame-retardant filler.

Immersion calorimetry as a tool to evaluate the catalytic performance of titanosilicate materials in the epoxidation of cyclohexene.

Different types of titanosilicates are synthesized, structurally characterized, and subsequently catalytically tested in the liquid-phase epoxidation of cyclohexene. The performance of three types of combined zeolitic/mesoporous materials is compared with that of widely studied Ti-grafted-MCM-41 molecular sieve and the TS-1 microporous titanosilicate. The catalytic test results are correlated with the structural characteristics of the different catalysts. Moreover, for the first time, immersion calorimetry with the same substrate molecule as in the catalytic test reaction is applied as an extra means to interpret the catalytic results. A good correlation between catalytic performance and immersion calorimetry results is found. This work points out that the combination of catalytic testing and immersion calorimetry can lead to important insights into the influence of the materials structural characteristics on catalysis. Moreover, the potential of using immersion calorimetry as a screening tool for catalysts in epoxidation reactions is shown.

Organic-inorganic hybrid saponites obtained by intercalation of titano-silsesquioxane.

The synthesis and characterization of two bifunctional composite materials based on synthetic saponite clays is here presented. These materials were prepared by intercalation of a Ti-containing aminopropylisobutyl polyhedral oligomeric silsesquioxane (Ti-NH(2) POSS) in synthetic saponite samples containing interlayer sodium (Na-SAP) or protons (H-SAP). Hybrid organic-inorganic materials, Ti-NHM-1 and Ti-NHM-2, were obtained upon ion exchange. Structural, spectroscopic, and thermal properties of both hybrid materials were investigated in detail along with their catalytic activity in cyclohexene oxidation.

Design and use of nanostructured single-site heterogeneous catalysts for the selective transformation of fine chemicals.

Nanostructured single-site heterogeneous catalysts possess the advantages of classical solid catalysts, in terms of easy recovery and recycling, together with a defined tailored chemical and steric environment around the catalytically active metal site. The use of inorganic oxide supports with selected shape and porosity at a nanometric level may have a relevant impact on the regio- and stereochemistry of the catalytic reaction. Analogously, by choosing the optimal preparation techniques to obtain spatially isolated and well-characterised active sites, it is possible to achieve performances that are comparable to (or, in the most favourable cases, better than) those obtained with homogeneous systems. Such catalysts are therefore particularly suitable for the transformation of highly-functionalised fine chemicals and some relevant examples where high chemo-, regio- and stereoselectivity are crucial will be described.