ABSTRACT
Owing to the high optical reflectivity of copper powder, the high-performance fabrication of copper alloys in the laser additive manufacturing (AM) field is problematic. To tackle this issue, this study employs the remelting process during laser powder bed fusion AM to fabricate defect-free and high-performance CuCrZr alloy. Compared to the non-remelting process, the remelting process yields finer grains, smaller precipitates, denser dislocations, and smaller dislocation cells. It realizes not only the dense molding of high laser reflectivity powders but also excellent mechanical properties and electrical conductivity (with an ultimate tensile strength of 329 MPa and conductivity of 96% IACS) without post-heat treatment. Furthermore, this study elucidates the influence of complex thermal gradients and multiple thermal cycles on the manufacturing process under the remelting process, as well as the internal mechanisms of microstructure evolution and performance improvement.
ABSTRACT
Thermal management of integrated circuit chip is an increasing important challenge faced today. Heat dissipation of the chip is generally achieved through the die attach material and solders. With the temperature gradients in these materials, high thermo-mechanical stress will be developed in them, and thus they must also be mechanically strong so as to provide a good mechanical support to the chip. The use of multi-walled carbon nanotube to enhance the thermal conductivity, and the mechanical strength of die attach epoxy and Pb-free solder is demonstrated in this work.