ABSTRACT
In this paper we present SpikeOnChip, a custom embedded platform for neuronal activity recording and online analysis. The SpikeOnChip platform was developed in the context of automated drug testing and toxicology assessments on neural tissue made from human induced pluripotent stem cells. The system was developed with the following goals: to be small, autonomous and low power, to handle micro-electrode arrays with up to 256 electrodes, to reduce the amount of data generated from the recording, to be able to do computation during acquisition, and to be customizable. This led to the choice of a Field Programmable Gate Array System-On-Chip platform. This paper focuses on the embedded system for acquisition and processing with key features being the ability to record electrophysiological signals from multiple electrodes, detect biological activity on all channels online for recording, and do frequency domain spectral energy analysis online on all channels during acquisition. Development methodologies are also presented. The platform is finally illustrated in a concrete experiment with bicuculline being administered to grown human neural tissue through microfluidics, resulting in measurable effects in the spike recordings and activity. The presented platform provides a valuable new experimental instrument that can be further extended thanks to the programmable hardware and software.
Subject(s)
Induced Pluripotent Stem Cells , Electrodes , Electrophysiological Phenomena , Humans , Neurons , SoftwareABSTRACT
Reducing the mechanical mismatch between the stiffness of a neural implant and the softness of the neural tissue is still an open challenge in neuroprosthetics. The emergence of conductive hydrogels in the last few years has considerably widened the spectrum of possibilities to tackle this issue. Nevertheless, despite the advancements in this field, further improvements in the fabrication of conductive hydrogel-based electrodes are still required. In this work, we report the fabrication of a conductive hydrogel-based microelectrode array for neural recording using a hybrid material composed of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), and alginate. The mechanical properties of the conductive hydrogel have been investigated using imaging techniques, while the electrode arrays have been electrochemically characterized at each fabrication step, and successfully validated both in vitro and in vivo. The presence of the conductive hydrogel, selectively electrodeposited onto the platinum microelectrodes, allowed achieving superior electrochemical characteristics, leading to a lower electrical noise during recordings. These findings represent an advancement in the design of soft conductive electrodes for neuroprosthetic applications.
ABSTRACT
Several multi-electrode array devices integrating planar metal electrodes were designed in the past 30 years for extracellular stimulation and recording from cultured neuronal cells and organotypic brain slices. However, these devices are not well suited for recordings from acute brain slice preparations due to a dead cell layer at the tissue slice border that appears during the cutting procedure. To overcome this problem, we propose the use of protruding 3D electrodes, i.e. tip-shaped electrodes, allowing tissue penetration in order to get closer to living neurons in the tissue slice. In this paper, we describe the design and fabrication of planar and 3D protruding multi-electrode arrays. The electrical differences between planar and 3D protruding electrode configuration were simulated and verified experimentally. Finally, a comparison between the planar and 3D protruding electrode configuration was realized by stimulation and recording from acute rat hippocampus slices. The results show that larger signal amplitudes in the millivolt range can be obtained with the 3D electrode devices. Spikes corresponding to single cell activity could be monitored in the hippocampus CA3 and CA1 region using 3D electrodes.