Simplified single neuron model for robust local pulse wave velocity sensing using a tetherless bioimpedance device.

Pulse arrival time (PAT), Pulse transit time (PTT), and Pulse Wave Velocity (PWV) have all been used as metrics for assessing a number of cardiovascular applications, including arterial stiffness and cuffless blood pressure monitoring. These have been measured using various sensing methods, including electrocardiogram (ECG) with photoplethysmogram (PPG), two PPG sensors, or two Bioimpedance (BioZ) sensors. Our study addresses the mathematical inaccuracies of previous bioimpedance approaches and incorporates PTT weights for the peak-peak (PTTpp), middle-middle (PTTmm), and foot-foot (PTTff) segments of the sensing signal into a single neuron model to determine a more accurate and stable PWV. In addition, we developed a tetherless bioimpedance device and compared our PTT estimation approaches, which yielded PWV across six subjects and two different arteries. Specifically, using our model, we found that the most reliable combination of weights corresponding to PTTpp, PTTmm, and PTTff was (0.260, 0.704, 0.036) for the brachial artery and (0.104, 0.858, 0.038) for radial artery. This model consistently yielded stable values across repetitions, with PWV values of 5.2 m/s, 5.3 m/s, and 5.9 m/s for the brachial artery and values of 5.8 m/s, 6.6 m/s, and 6.5 m/s for the radial artery. This system and model offer the possibility of obtaining higher reliability PTT and PWV values yielding better monitoring of cardiovascular health measures such as blood pressure and arterial stiffness.

Add-on soft electronic interfaces for continuous cuffless blood pressure monitoring.

Continuous monitoring of arterial blood pressure is clinically important for the diagnosis and management of cardiovascular diseases. Soft electronic devices with skin-like properties show promise in a wide range of applications, including the human-machine interface, the Internet of things, and health monitoring. Here, we report the use of add-on soft electronic interfaces to address the connection challenges between soft electrodes and rigid data acquisition circuitry for bioimpedance monitoring of cardiac signals, including heart rate and cuffless blood pressure. Nanocomposite films in add-on electrodes provide robust electrical and mechanical contact with the skin and the rigid circuitry. We demonstrate bioimpedance sensors composed of add-on electrodes for continuous blood pressure monitoring with high accuracy. Specifically, the bioimpedance collected with add-on nanocomposite electrodes shows a signal-to-noise ratio of 37.0 dB, higher than the ratio of 25.9 dB obtained with standard silver/silver chloride (Ag/AgCl gel) electrodes. Although the sample set is low, the continuously measured systolic and diastolic blood pressure offer accuracy of -2.0 ± 6.3 mmHg and -4.3 ± 3.9 mmHg, respectively, confirming the grade A performance based on the IEEE standard. These results show promise in bioimpedance measurements with add-on soft electrodes for cuffless blood pressure monitoring.