ABSTRACT
The incorporation of multiple immiscible metals in high-entropy oxides can create the unconventional coordination environment of catalytic active sites, while the high formation temperature of high-entropy oxides results in bulk materials with low specific surface areas. Here we develop the high-entropy LaMnO3-type perovskite-polyoxometalate subnanowire heterostructures with periodically aligned high-entropy LaMnO3 oxides and polyoxometalate under a significantly reduced temperature of 100 oC, which is much lower than the temperature required by state-of-the-art calcination methods for synthesizing high-entropy oxides. The high-entropy LaMnO3-polyoxometalate subnanowires exhibit excellent catalytic activity for the photoelectrochemical coupling of methane into acetic acid under mild conditions (1 bar, 25 oC), with a high productivity (up to 4.45 mmol gâ1cat hâ1) and selectivity ( > 99%). Due to the electron delocalization at the subnanometer scale, the contiguous active sites of high-entropy LaMnO3 and polyoxometalate in the heterostructure can efficiently activate C - H bonds and stabilize the resulted *COOH intermediates, which benefits the in situ coupling of *CH3 and *COOH into acetic acid.
ABSTRACT
Spatially confining isolated atomic sites in low-dimensional nanostructures is a promising strategy for preparing high-performance single-atom catalysts (SACs). Herein, fascinating polyoxometalate cluster-based single-walled nanotubes (POM-SWNTs) with atomically precise structures, uniform diameter, and single-cluster wall thickness are constructed by lacunary POM clusters (PW11 and P2W17 clusters). Isolated metal centers are accurately incorporated into the PW11-SWNTs and P2W17-SWNTs supports. The structures of the resulting MPW11-SWNTs and MP2W17-SWNTs are well established (M = Cu, Pt). Molecular dynamics simulations demonstrate the stability of POM-SWNTs. Furthermore, the turnover frequency of PtP2W17-SWNTs is 20 times higher than that of PtP2W17 cluster units and 140 times higher than that of Pt nanoparticles in the alcoholysis of dimethylphenylsilane. Theoretical studies indicate that incorporating a Pt atom into the P2W17 support induces straightforward electron transfer between them, combining the nanoconfined environment to enhance the catalytic activity of PtP2W17-SWNTs. This work shows the feasibility of using subnanometric POM clusters to assemble single-walled cluster nanotubes, highlighting their potential to prepare superior SACs with precise structures.
ABSTRACT
Temperature measurements are ubiquitous in combustion systems. However, the accuracy of surface temperature measurements of critical components operating in a harsh combustion gases environment is greatly affected by reï¬ection and combustion gas radiation. In this paper, an analytical two-color pyrometry model was used to quantitatively analyze the temperature errors caused by the combination of reflection and H2O-CO2-CO-N2 mixture radiation. As the results indicate, the most signiï¬cant contributors to the measurement errors are found to be the error arising from H2O-CO2-CO-N2 mixture absorption and emission for two-color pyrometer operating at long wavebands. The errors due to reflection predominate over the measurement errors measured at short wavebands. In a combustor where reflected radiation from high-temperature surrounding and hot/cool combustion gas is present, two-color pyrometry is practically inoperative as a consequence of its unacceptably large measurement error and high measurement sensitivity. When the intervening gas is isothermal and the optical distance from surface to detector is considered optically thin, the temperature error has linear growth with both the H2O-CO2-CO-N2 mixture concentration and viewing path length increasing. This linear change provides us a method of linear extrapolation to eliminate the effect of uncertain gaseous absorption and emission. The results of this work can be used as a theoretical support for the design and application of a two-color pyrometer in a gas-fired furnace.
ABSTRACT
Novel approach has been constructed for preparing the amphiphilic star copolymer pH/reduction stimuli-responsive cross-linked micelles (SCMs) as a smart drug delivery system for the well-controlled anti-tumor drug doxorubicin (DOX) release. The SCMs had a low CMC value of 5.3 mg/L. The blank and DOX-loaded SCMs both had a spherical shape with sizes around 100-180 nm. In addition, the good stability and well pH/reduction-sensitivity of the SCMs were determined by dynamic light scattering (DLS) as well. The SCMs owned a low release of DOX in bloodstream and normal tissues while it had a fast release in tumor higher glutathione (GSH) concentration and/or lower pH value conditions, which demonstrates their pH/reduction dual-responsiveness. Furthermore, we conducted the thermodynamic analysis to study the interactions between the DOX and polymer micelles in the DOX release process. The values of the thermodynamic parameters at pH 7.4 and at pH 5.0 conditions indicated that the DOX release was endothermic and controlled mainly by the forces of an electrostatic interaction. At pH 5.0 with 10 mM GSH condition, electrostatic interaction, chemical bond, and hydrophobic interactions contributed together on DOX release. With the low cytotoxicity of blank SCMs and well cytotoxicity of DOX-loaded SCMs, the results indicated that the SCMs could form a smart cancer microenvironment-responsive drug delivery system. The release kinetic and thermodynamic analysis offer a theoretical foundation for the interaction between drug molecules and polymer matrices, which helps provide a roadmap for the oriented design and control of anti-cancer drug release for cancer therapy.
ABSTRACT
Well-defined polymer micelles with core-shell structure are good delivery platform for stabilizing silver nanoparticles (AgNPs) in the field of antimicrobials targeting diseases. The rational construction of the polymer structure, an efficient, facile, and green preparation approach, and comprehensive exploration of the derived AgNPs are necessary, such as size, particle stability, antibacterial activity, and other properties. Herein, we designed and assessed the in vitro antimicrobial activity of AgNPs-decorated copolymer micelles with different copolymer topologies. First, linear or four-arm star triblock copolymers with the similar molecular weight and degree of polymerization were obtained, which consisted of DMAEMA for in situ reduction of silver ions to form AgNPs without external reducing agent. HEMA and PEGMA in micellar shell gave an enhanced stability of AgNPs during blood circulation. The combination of computational modeling and experimental results indicated that both types of micelles could fabricate AgNPs with monodisperse and spherical morphology. Star copolymer micelles stabilized AgNPs had smaller average size, better stability, and higher antibacterial activity than those with linear structure, which may due to higher stability of micelles from star copolymers. Furthermore, the cytotoxicity evaluation test showed that the achieved linear or star copolymers micelles stabilized AgNPs had good biocompatibility. This work provides a facile and universal approach in the rational design of micelles stabilized AgNPs with suitable topology for fighting against a wide range of bacterial infections.
ABSTRACT
The development of nanomaterials as highly efficient contrast agents for tumor computed tomography (CT) imaging still remains a huge challenge. In this study, a novel and facile approach to fabricate unimolecular micelles-stablized gold nanoparticles (AuNPs) without external reductant for in vitro targeted CT imaging was described. Amphiphilic 21-arm star-like polymers ß-cyclodextrin-g-{poly(2-(dimethylamino)ethyl methacrylate)-poly(2-hydroxyethyl methacrylate)-poly[poly(ethylene glycol) methyl ether methacrylate]} [ß-CD-g-(PDMA-b-PHEMA-b-PPEGMA)] was firstly synthesized and proved to form unimolecular core-middle layer-shell-type micelles in water through experimental and computer simulation results. Taking advantage of the reducing groups of PDMA block, AuNPs were decorated in the micellar PDMA block because of the in situ reduction of gold ions, which were absorbed by the PDMA chains in the core layer with a narrow nanoparticle size distribution. This strategy could prevent aggregation of AuNPs, which were capable of being employing as a highly effective probe for specific CT imaging in vitro. Importantly, the ß-CD-g-(PDMA-b-PHEMA-b-PPEGMA)/AuNPs incubated with HepG2 cells, displayed more intense X-ray attenuation property (>37%) than conventional iodine-based CT imaging agent (Omnipaque) and also possessed a satisfying cytocompatibility in the given concentration range. The facile fabrication procedures and the efficiency of CT imaging render the novel hybrid unimolecular micelles to become potent candidates for applications in tumor-targeted CT imaging.