Multiscale structure analysis of a pH-responsive gelatin/hydroxypropyl methylcellulose phthalate blend using small-angle scattering.

HYPOTHESIS: Hydroxypropyl methylcellulose phthalate (HPMCP) is an enteric polymer that has been employed in drug delivery systems to delay the release of the encapsulated active pharmaceutical ingredients through its pH-responsive solubility change. This has been recently demonstrated as an effective means for delaying the drug release from gelatin/HPMCP hydrogels at gastric pH values. However, structural characteristics of HPMCP agglomeration in gelatin/HPMCP hydrogels is not well understood thus limiting further tailoring of their material properties. EXPERIMENTS: We investigated the multiscale structure of a gelatin/HPMCP hydrogel (1:1 by weight) between pH 2 and 6 at 37 °C, i.e. above the upper critical solution transition temperature of gelatin, using small-angle X-ray scattering and contrast-variation small-angle neutron scattering to understand the pH-responsive structure of HPMCP and the cross-correlation between gelatin and HPMCP. FINDINGS: Agglomeration of HPMCP between pH 2 and 4 was evidenced by the formation of mass fractal structures, with a fractal dimension ranging from 1.5 to 2.7, comprising primary particles with a radius of gyration ranging from 70 to 140 Å. Blending with gelatin influenced the fractal structure of HPMCP and the primary particle size. Gelatin and HPMCP exhibited negative cross-correlation in all probed length scales and pH values, which was attributed to volume-exclusion interaction in a double-network-like solution architecture.

Evidence of a Rod-like Structure for Hydroxypropyl Cellulose Samples in Aqueous Solution.

Because hydroxypropyl cellulose (HpC) is a popular polymeric material that forms a liquid crystalline phase in solutions with various kinds of solvents, including water, it is commonly thought that HpC has a typical rod-like structure in solution. In this study, the structures of commercial HpC samples in aqueous solution with average molar substitution numbers (MS) ranging from 3.6 to 3.9 and weight-average molar masses (Mw) ranging from 36 to 740 kg mol-1 were investigated in detail. We first used multiple techniques, including standard static and dynamic light scattering (SLS and DLS), neutron and X-ray scattering experiments, and viscometric measurements, to obtain clear evidence of rod-like structures quantitatively. The dependence of excess scattering intensities for HpC samples under dilute conditions on the magnitude of the scattering vector over a wide range from 8.9 × 10-3 to 3.0 × 10 nm-1 was reasonably described by the form factor of rod particles with length (L) and diameter (d). Although the determined L value was close to the contour length (lc) calculated from the Mw values in the lower Mw range, L became obviously less than lc with increasing Mw. The radius of gyration (Rg) determined via SLS measurements was proportional to L by a factor of approximately 3.5 ∼ √12 over the Mw range examined. These observations revealed that the conformation of HpC molecules changes from an elongated single chain to a certain folded structure, maintaining the shape of the rod-shaped particles. Moreover, the Mw dependencies of the intrinsic viscosities and translational diffusion coefficients of the HpC samples resulting from DLS measurements were reasonably described with a theoretical rod-like particle model, assuming that L and d are identical to those resulting from the scattering behaviors.

Alcohol-Induced Denaturation of Hen Egg White Lysozyme Studied by Infrared, Circular Dichroism, and Small-Angle Neutron Scattering.

In aqueous binary solvents with fluorinated alcohols, 2,2,2-trifluoroethanol (TFE) and 1,1,1,3,3,3-hexafluoroisopropanol (HFIP), and aliphatic alcohols, ethanol (EtOH) and 2-propanol (2-PrOH), the denaturation of hen egg white lysozyme (HEWL) with increasing alcohol mole fraction xA has been investigated in a wide view from the molecular vibration to the secondary and ternary structures. Circular dichroism (CD) measurement showed that the secondary structure of α-helix content of HEWL increases on adding a small amount of the fluorinated alcohol to the aqueous solution, while the ß-sheet content decreases. On the contrary, the secondary structure does not significantly change by the addition of the aliphatic alcohols. Correspondingly, the infrared (IR) spectroscopic measurements revealed that the amide I band red-shifts on the addition of the fluorinated alcohol. However, the band remains unchanged in the aliphatic alcohol systems with increasing alcohol content. To observe the ternary structure of HEWL, small-angle neutron scattering (SANS) experiments with H/D substitution technique have been applied to the HEWL solutions. The SANS experiments were successful in revealing the details of how the geometry of the HEWL changes as a function of xA. The SANS profiles indicated the spherical structure of HEWL in all of the alcohol systems in the xA range examined. The mean radius of HEWL in the two fluorinated alcohol systems increases from ∼16 to ∼18 Å during the change in the secondary structure against the increase in the fluorinated alcohol content. On contrast, the radius does not significantly change in both aliphatic alcohol systems below xA = 0.3 but expands to ∼19 Å as the alcohol content is close to the limitation of the HEWL solubility. According to the present results, together with our knowledge of the alcohol cluster formation and the interaction of the trifluoromethyl (CF3) groups with the hydrophobic moieties of biomolecules, the effects of alcohols on the denaturation of the protein have been discussed on a molecular scale.

Polyelectrolyte-protein synergism: pH-responsive polyelectrolyte/insulin complexes as versatile carriers for targeted protein and drug delivery.

The co-assembly of polyelectrolytes (PE) with proteins offers a promising approach for designing complex structures with customizable morphologies, charge distribution, and stability for targeted cargo delivery. However, the complexity of protein structure limits our ability to predict the properties of the formed nanoparticles, and our goal is to identify the key triggers of the morphological transition in protein/PE complexes and evaluate their ability to encapsulate multivalent ionic drugs. A positively charged PE can assemble with a protein at pH above isoelectric point due to the electrostatic attraction and disassemble at pH below isoelectric point due to the repulsion. The additional hydrophilic block of the polymer should stabilize the particles in solution and enable them to encapsulate a negatively charged drug in the presence of PE excess. We demonstrated that diblock copolymers, poly(ethylene oxide)-block-poly(N,N-dimethylaminoethyl methacrylate) and poly(ethylene oxide)-block-poly(N,N,N-trimethylammonioethyl methacrylate), consisting of a polycation block and a neutral hydrophilic block, reversibly co-assemble with insulin in pH range between 5 and 8. Using small-angle neutron and X-ray scattering (SANS, SAXS), we showed that insulin arrangement within formed particles is controlled by intermolecular electrostatic forces between protein molecules, and can be tuned by varying ionic strength. For the first time, we observed by fluorescence that formed protein/PE complexes with excess of positive charges exhibited potential for encapsulating and controlled release of negatively charged bivalent drugs, protoporphyrin-IX and zinc(II) protoporphyrin-IX, enabling the development of nanocarriers for combination therapies with adjustable charge, stability, internal structure, and size.

Structural analysis of polyglycerol fatty acid ester-coenzyme Q10 aggregates in solution.

Polyglycerol fatty acid esters (PGFEs) are common food additives. PGFE-based formulations exhibit high structural stability, however, the stability mechanism of the micellar structures has not been yet elucidated. In this study, nanostructural analysis was performed using small-angle neutron and X-ray scattering (SANS and SAXS) measurements to reveal the mechanism of the structural stability of PGFE-coenzyme Q10 (CoQ10) mixtures as a CoQ10 formulation. Pure PGFE formed multilamellar vesicles, whereas PGFE-CoQ10 formed spherical micelles. Furthermore, when the amount of added water increased, the PGFE-CoQ10 micellar size and the amount of water in the micelles remained unchanged. A model-fitting analysis of the SANS results suggested that the CoQ10 molecules were introduced between the surfactants, forming a palisade-type structure. The high structural stability of the PGFE-CoQ10 micelles was attributed to two factors: proper spreading of the hydrophilic head chains and inhibition of the change of the amount of water inside the micelles by the PGFE heads and quinone ring of CoQ10. This indicates that PGFE-CoQ10 can function in water while maintaining the micellar structure formed in the storage solution. The findings of this study are important for the safety and nano-hazard aspects of PGFE-CoQ10 formulations.

Fibrillization Process of Human Amyloid-Beta Protein (1-40) under a Molecular Crowding Environment Mimicking the Interior of Living Cells Using Cell Debris.

Molecular crowding environments play a crucial role in understanding the mechanisms of biological reactions. Inside living cells, a diverse array of molecules coexists within a volume fraction ranging from 10% to 30% v/v. However, conventional spectroscopic methods often face difficulties in selectively observing the structures of particular proteins or membranes within such molecularly crowded environments due to the presence of high background signals. Therefore, it is crucial to establish in vitro measurement conditions that closely resemble the intracellular environment. Meanwhile, the neutron scattering method offers a significant advantage in selectively observing target biological components, even within crowded environments. Recently, we have demonstrated a novel scattering method capable of selectively detecting the structures of targeted proteins or membranes in a closely mimicking intracellular milieu achieved utilizing whole-cell contents (deuterated-cell debris). This method relies on the inverse contrast matching technique in neutron scattering. By employing this method, we successfully observed the fibrillization process of human amyloid beta-protein (Aß 1-40) under a molecular crowding environment (13.1% w/v cell debris, Aß/cell debris = ~1/25 w/w) that closely mimics the interior of living cells. Aß protein is well known as a major pathogenic component of Alzheimer's disease. The present results combining model simulation analyses clearly show that the intracellular environment facilitates the potential formation of even more intricate higher-order aggregates of Aß proteins than those previously reported.

Time-Resolved Structural Analysis of Fast-Photoresponsive Surfactant Micelles by Stroboscopic Small-Angle Neutron Scattering.

Photoresponsive materials are garnering attention because of their applications toward building a sustainable society. A recently developed fast-photoresponsive amphiphilic lophine dimer (3TEG-LPD) responds rapidly to light, making it a promising candidate for drug-delivery systems. In this study, the mechanism of structural changes induced by ultraviolet (UV) irradiation in 3TEG-LPD micelles in an aqueous solution was investigated via an in situ time-resolved small-angle neutron scattering (SANS) technique. Since subsecond resolution was necessary to observe the structural changes in the 3TEG-LPD micelles, stroboscopic SANS analysis was employed to obtain scattering profiles with a time width of 0.5 s. The structural parameters were quantitatively determined by performing a model-fitting analysis of the SANS results. The stroboscopic SANS results showed that upon UV irradiation, the axial ratio and pseudo-aggregation number of the 3TEG-LPD micelles increased by 1.8 and 1.6 times, respectively, whereas the number of water molecules per surfactant molecule decreased. This finding suggested that the change in the shape of the micelles from spherical to ellipsoidal shape was accompanied by dehydration. Under the present UV irradiation conditions, this structural change of the micelle occurred rapidly during the first 30 s after the start of UV irradiation. Each structural parameter recovered exponentially and reversibly during the recovery process after the cessation of UV irradiation. The changes in these parameters were analyzed in terms of kinetics by comparing them with the changes in the molecular structure. We found that the change of the micelles proceeds approximately twice as fast as the association of the molecule. Furthermore, from the perspective of the critical packing parameter consideration, the SANS analysis revealed that the UV-induced changes in 3TEG-LPD micelles are dominated by the enthalpy contribution. This finding is expected to be useful for developing new materials for various applications.

Structure and Conformation of Hydroxypropylmethyl Cellulose with a Wide Range of Molar Masses in Aqueous Solution─Effects of Hydroxypropyl Group Addition.

The structure of hydroxypropylmethyl cellulose (HpMC) samples with a wide range of weight average molar masses (Mw) from 23 to 5000 kg mol-1, a controlled degree of substitution (DS) of 1.9 by methyl groups, and a molar substitution number (MS) of 0.25 by hydroxypropyl groups dissolved in aqueous solution was examined using static light scattering (SLS), dynamic light scattering (DLS), small-to-wide angle neutron scattering (S-WANS) techniques, and intrinsic viscosity ([η]) measurements. The determined Mw and the radius of gyration (Rg) showed the relationships Rg ∝ Mw1.0 and [η] ∝ Mw1.7 in a range of Mw < 100 kg mol-1, similar to rigid rod molecules in solution. However, exponents in the relationships decreased gradually with increasing Mw and reached ∼0.5 in a high Mw region, which is a typical value of flexible chain molecules for both Rg and [η]. These observations suggest that the HpMC samples behave as semiflexible rods with a certain persistence length (lp). The ratios of the hydrodynamic radius via DLS measurements to Rg also supported semiflexible rod behavior. Particle form factors and the average lengths (L) resulting from SLS and S-WANS experiments are well described with rigid rod particles in the range of Mw < 100 kg mol-1 and semiflexible rods with lp ∼ 100 nm in Mw > 100 kg mol-1. Because the average contour length (lc) calculated from Mw is approximately twice as long as L in the Mw range < 100 kg mol-1, the formed HpMC particles possess a folded hairpin-like elongated rigid rod structure. However, the lc/L value increases gradually in the range Mw > 200 kg mol-1, where the formed HpMC particles behave as semiflexible rods. The formed particle structure was substantially different from that found in methyl cellulose samples with a similar DS value, which showed rod-like behavior over a wide Mw range. The addition of hydroxypropyl groups only at MS = 0.25 effectively changed the formed particle structure.

Equation Elucidating the Catalyst-Layer Proton Conductivity in a Polymer Electrolyte Fuel Cell Based on the Ionomer Distribution Determined Using Small-Angle Neutron Scattering.

The performance of a polymer electrolyte fuel cell can be enhanced by improving the proton conductivity of the catalyst layer, where the oxygen reduction reaction generates electrochemical power. Protons are conducted through the ionomer coatings on catalyst-supporting carbon particles, which form porous structures that facilitate oxygen diffusion during the reaction within the catalyst layer. Therefore, while a higher ionomer content in the catalyst layer is favorable, the proton conductivity is additionally governed by the type of carbon support. As the influence of the ionomer distribution is not fully understood, we introduce a novel proton conductivity model for use in simulating catalyst layers with various amounts of ionomers and different carbon types. This proton conductivity model considers that several ionomers occur as thin films with drastically suppressed proton conductivities. Although evaluating the thin-film ionomer fraction is challenging, proton-conducting ion clusters in thick-film ionomers have been detected by characterizing the catalyst layers via small-angle neutron scattering. Our model reveals that reducing the fraction of the thin-film ionomer or avoiding factors that suppress its proton conduction improves the performance of the catalyst layer.

Extended Q-range small-angle neutron scattering to understand the morphology of proton-exchange membranes: the case of the functionalized syndiotactic-polystyrene model system.

Semi-crystalline polymers exhibit microphase separation into crystalline and amorphous domains characterized by multiple structural levels with sizes ranging from ångströms to hundreds of nanometres. The combination of small-angle (SANS) and wide-angle (WANS) neutron scattering on the same beamline enables reliable in situ characterization of such materials under application-relevant conditions, with the unique advantage of contrast variation by controlled labelling, allowing the structure of such multi-component systems to be resolved in detail. This paper reports a structural analysis performed on deuterated polymer membranes based on syndiotactic polystyrene (sPS) using an extended Q-range SANS and WANS combination, always with the same neutron scattering instrument, either a pinhole SANS diffractometer installed at a research reactor or a 'small- and wide-angle' time-of-flight diffractometer installed at a neutron spallation source. sPS is a semi-crystalline material that becomes hydrophilic and proton conducting when suitable functionalization is achieved by thin film sulfonation, and can form various co-crystalline complexes (clathrates) with small organic molecules stored in the crystalline phase as guests in the vacancies between the polymer helices. Therefore, this material is interesting not only for its conducting properties but also for its versatility as a model system to evaluate the usefulness of extended Q-range neutron scattering in such studies. Variation of neutron contrast was achieved in the amorphous hydrophilic phase by using H2O or D2O to hydrate the membranes and in the crystalline phase by loading the clathrates with deuterated or protonated guest molecules. The experimental approach, the advantages and limitations of the two types of instrumentation used in such analyses, and the main results obtained with respect to the structural characterization of sulfonated sPS membranes under different hydration and temperature conditions are reported, and the potential of this method for similar structural studies on other semi-crystalline polymeric materials is discussed.

Effect of water content on stratum corneum penetration mechanism of W/O type microemulsions.

The stratum corneum (SC) consists of a lipid layer that forms two types of lamellar structures: short lamellar (S-La) and long lamellar (L-La). It has been reported that S-La contains water phases in the hydrophilic region of the lipids, and that it may play an important role in regulating the water content of the SC. The amount of water in the SC can affect how a drug carrier permeates through the intercellular lipid pathway. To better understand the impact of SC water content on the skin penetration mechanism of a microemulsion (ME), we conducted a study using small-angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), and small-angle neutron scattering (SANS). Our results showed that MEs can enhance skin permeation under humid conditions because the lipid packing structures of the hydrated SC are more disrupted than those of the dry SC. The results also showed that the inner water of MEs was released to the SC when applying MEs to the dry SC, resulting in an increase in the repeat distance of S-La. Conversely, when MEs are applied to hydrated SC, the MEs absorb the water from the SC into their inner phases, causing a decrease in the repeat distance of S-La over time.

Conformation and Structure of Hydroxyethyl Cellulose Ether with a Wide Range of Average Molar Masses in Aqueous Solutions.

The solution properties of a water-soluble chemically modified cellulose ether, hydroxyethyl cellulose (HeC), were examined using static light scattering (SLS), dynamic light scattering (DLS), small-to-wide-angle neutron scattering (S-WANS), small-to-wide-angle X-ray scattering (S-WAXS) and viscometric techniques at 25 °C. The examined HeC samples had average molar substitution numbers ranging from 2.36 to 2.41 and weight average molar masses (Mw) that fell within a wide range from 87 to 1500 kg mol-1. Although the relationship between the determined radius of gyration (Rg) and Mw was described as Rg ∝ Mw~0.6, as is observed usually in flexible polymer solutions in good solvents, the observed scattering vector (q) dependencies of excess Rayleigh ratios were well interpreted using a rigid rod particle model, even in high-Mw samples. Moreover, the ratios of the formed particle length (L) evaluated assuming the model for rigid rods to the determined Rg showed the relationship LRg-1 ~ 3.5 irrespective of Mw and were close to those theoretically predicted for rigid rod particle systems, i.e., LRg-1 = 12. The observed SLS behavior suggested that HeC molecules behave just like rigid rods in aqueous solution. As the L values were not simply proportional to the average molecular contour length calculated from the Mw, the chain conformation or structure of the formed particles by HeC molecules in aqueous solution changed with increasing Mw. The q dependencies of excess scattering intensities observed using the S-WANS and S-WAXS experiments demonstrated that HeC molecules with Mw less than 200 kg mol-1 have a diameter of ~1.4 nm and possess an extended rigid rod-like local structure, the size of which increases gradually with increasing Mw. The observed Mw dependencies of the translational and rotational diffusion coefficients and the intrinsic viscosity of the particle suspensions strongly support the idea that the HeC molecules behave as rigid rod particles irrespective of their Mw.

Neutron Reflectometry & Simultaneous Measurements of Rheology and Small Angle Neutron Scattering Studies for Polyether Modified Silicone Vesicle Systems.

Polyethyleneglycol 12 mol / polydimethylsiloxane co-polymer (PEG-12 dimethicone) is a type of polyether modified silicone (PEMS), which can form a lamellar liquid crystalline phase, and is widely used in cosmetics. The structural changes of PEG-12 dimethicone caused by water contents as well as shear flow were evaluated using simultaneous measurements of rheology and small angle neutron scattering (Rheo-SANS) and neutron reflectometry (NR). At high PEG-12 dimethicone concentrations (≥ 36 wt%), a reorientation of plate-like lamellar structures were observed and the neutral orientation was the most favorable. However, lamella-to-vesicle transitions were hardly observed. PEG-12 dimethicone turned out to form a bi-layer on a hydrophilized Si-wafer in a similar manner to that in bulk though the structure had a certain level of roughness.

Protein Condensation at Nanopore Entrances as Studied by Differential Scanning Calorimetry and Small-Angle Neutron Scattering.

The condensation of globular myoglobin (Mb) at the pore entrances of mesoporous silica (MPS) with a series of pore diameters (4.2, 6.4, 7.7, and 9.0 nm) was examined by differential scanning calorimetry (DSC) and contrast-matching small-angle neutron scattering (CM-SANS) experiments. The DSC measurements were performed to estimate the amount of Mb adsorbed at two different adsorption sites, namely, the pore interior and the pore entrance regions. The CM-SANS measurements were conducted to observe condensation of Mb molecules at the pore entrance regions. Notably, the nanopore entrance with a diameter close to twice that of the Mb diameter was found to be the specific cavity to facilitate the condensation of globular Mb. The Mb condensation occurred at the entrances of the 6.4 nm pore during the adsorption uptake from concentrated Mb solutions, whereas the adsorption uptake from diluted Mb solutions induced the condensation of Mb at the entrances of the 7.7 nm pore.

Elongated Rodlike Particle Formation of Methyl Cellulose in Aqueous Solution.

The conformation and structure of methyl cellulose (MC) ether samples dissolved in pure water under dilute conditions were carefully reconsidered based on the results obtained using small-to-wide-angle neutron scattering (S-WANS), static light scattering (SLS), dynamic light scattering (DLS), and viscometric techniques. The examined MC samples possessed an average degree of substitution by methyl groups per glucose unit of ca 1.8 and weight average molar masses (M w), ranging from 23 to 790 kg mol-1. S-WANS experiments clearly demonstrated that the samples possess highly elongated rigid rodlike local structures in deuterium oxide solutions with weak periodicities of ca 0.4 and 1.0 nm on a length scale, which correspond to the average intermolecular distance between molecular chain portions facing each other in the formed rodlike structure and the repeating length of the monomeric cellobiose unit of molecular chains, respectively. Ratios of the particle length (L) to the radius of gyration (R g) determined by SLS techniques approximately showed the relationship LR g -1 = holding in rigid rods over the entire M w range examined in this study. However, the folding number, defined as the ratio of the average molecular contour length (l) to L, remained at the value of lL -1 ∼ 2, representing an elongated one-folded hairpin structure, until M w ∼ 300 kg mol-1 and increased substantially up to ca 4.9 at the highest M w of 790 kg mol-1. The observed increase in the lL -1 value corresponded well with an increase in the diameter of the formed rod with increasing M w observed in the S-WANS data. The M w dependencies of the translational diffusion coefficient determined via DLS measurements and that of the intrinsic viscosity detected via viscometric techniques also distinctly demonstrated that particles formed by the MC samples dissolved in aqueous solution behave as elongated rigid rods irrespective of M w.

Evidence of Long Two-Dimensional Folding Chain Structure Formation of Poly(vinylidene fluoride) in N-Methylpyrrolidone Solution: Total Form Factor Determination by Combining Multiscattering Data.

Very recently, we proposed that poly(vinylidene fluoride) (PVDF) dissolves in a long rectangular column conformation induced by the formation of a two-dimensional folding chain structure in an N-methylpyrrolidone (NMP) solution based on the results obtained from static light scattering (SLS), small- to wide-angle X-ray scattering (S-WAXS), and viscometric experiments. Small- to wide-angle neutron scattering (S-WANS) experiments were able to provide clear decisive evidence for the presence of such a two-dimensional folding chain structure in a deuterated (d)NMP solution of PVDF samples with two different weight average molar masses (M w) of 100 and 1200 kg mol-1, even under dilute conditions at concentrations less than the overlapping concentrations due to the quite high neutron scattering contrast obtained by using (d)NMP as a solvent. An increase in M w from 100 to 1200 kg mol-1 substantially increases the particle length and width from L = 80 to 350 nm and w 2 = 5.0 to 15 nm, respectively, while the thickness, w 1, is maintained at 0.3 nm. Since L is much longer than w 2 irrespective of M w, the particles formed by PVDF molecules in NMP simply behave as long rigid rods in a scattering vector (q) range covered by SLS measurements. A combination study of S-WANS and S-WAXS experiments covering a higher q range with the SLS techniques could clearly reveal increases in both the L and w 2 values with increasing M w.

Effects of self-hydrogen bonding among formamide molecules on the UCST-type liquid-liquid phase separation of binary solutions with imidazolium-based ionic liquid, [Cnmim][TFSI], studied by NMR, IR, MD simulations, and SANS.

The upper critical solution temperature (UCST)-type liquid-liquid phase separation of imidazolium-based ionic liquids (ILs), 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Cnmim][TFSI], where n represents the alkyl chain length of the cation, n = 6, 8, 10, and 12) binary solutions with formamide (FA) was examined as a function of temperature and the FA mole fraction xFA. The two-phase region (immiscible region) of the solutions is much larger and expands more with the increase in n, in comparison with the previous [Cnmim][TFSI]-1,4-dioxane (1,4-DIO) systems. An array of spectroscopic techniques, including 1H and 13C NMR and IR combined with molecular dynamics (MD) simulations, was conducted on the present binary systems to clarify the microscopic interactions that contribute to the phase-separation mechanism. The hydrogen-bonding interactions of the imidazolium ring H atoms are more favorable with the O atoms of the FA molecules than with 1,4-DIO molecules, whereas the latter interact more favorably with the alkyl chain of the cation. Upon lowering the temperature, the FA molecules gradually self-aggregate through self-hydrogen bonding to form FA clusters. Concomitantly, clusters of ILs are formed via the electrostatic interaction between the counter ions and the dispersion force among the IL alkyl chains. Small-angle neutron scattering (SANS) experiments on the [C6mim][TFSI]-FA-d2 and [C8mim][TFSI]-FA-d2 systems revealed, similarly to [Cnmim][TFSI]-1,4-DIO systems, the crossover of the mechanism from the 3D-Ising mechanism around the UCST xFA to the mean-field mechanism at both sides of the mole fraction. Interestingly, the xFA range of the 3D-Ising mechanism for the FA systems is wider compared with the range of the 1,4-DIO systems. In this way, the self-hydrogen bonding among FA molecules most significantly governs the phase equilibria of the [Cnmim][TFSI]-FA systems.

Giant Carbon Nano-Test Tubes as Versatile Imaging Vessels for High-Resolution and In Situ Observation of Proteins.

Cryogenic electron microscopy is one of the fastest and most robust methods for capturing high-resolution images of proteins, but stringent sample preparation, imaging conditions, and in situ radiation damage inflicted during data acquisition directly affect the resolution and ability to capture dynamic details, thereby limiting its broader utilization and adoption for protein studies. We addressed these drawbacks by introducing synthesized giant carbon nano-test tubes (GCNTTs) as radiation-insulating materials that lessen the irradiation impact on the protein during data acquisition, physical molecular concentrators that localize the proteins within a nanoscale field of view, and vessels that create a microenvironment for solution-phase imaging. High-resolution electron microscopy images of single and aggregated hemoglobin molecules within GCNTTs in both solid and solution states were acquired. Subsequent scanning transmission electron microscopy, small-angle neutron scattering, and fluorescence studies demonstrated that the GCNTT vessel protected the hemoglobin molecules from electron irradiation-, light-, or heat-induced denaturation. To demonstrate the robustness of GCNTT as an imaging platform that could potentially augment the study of proteins, we demonstrated the robustness of the GCNTT technique to image an alternative protein, d-fructose dehydrogenase, after cyclic voltammetry experiments to review encapsulation and binding insights. Given the simplicity of the material synthesis, sample preparation, and imaging technique, GCNTT is a promising imaging companion for high-resolution, single, and dynamic protein studies under electron microscopy.

On the Proton Conduction Pathways in Polyelectrolyte Membranes Based on Syndiotactic-Polystyrene.

When functionalized by the solid-state sulfonation process, the amorphous regions of the semi-crystalline syndiotactic-polystyrene (sPS) become hydrophilic, and thus can conduct protons upon membrane hydration, which increases the interest in this material as a potential candidate for applications with proton exchange membranes. The resistance of sulfonated sPS to oxidative decomposition can be improved by doping the membrane with fullerenes. In previous work, we have described the morphology in hydrated sulfonated sPS films doped with fullerenes on different length scales as determined by small-angle neutron scattering (SANS) and the structural changes in such membranes as a function of the degree of hydration and temperature. In the current work, we report on the relationship between the morphology of hydrated domains as obtained by SANS and the proton conductivity in sulfonated sPS-fullerene composite membranes at different temperature and relative humidity (RH) conditions. Based on this combined experimental approach, clear evidence for the formation and evolution of the hydrated domains in functionalized sPS membranes has been provided and a better understanding of the hydration and conductivity pathways in this material has been obtained.

Star-Polymer-DNA Gels Showing Highly Predictable and Tunable Mechanical Responses.

Dynamically crosslinked gels are appealing materials for applications that require time-dependent mechanical responses. DNA duplexes are ideal crosslinkers for building such gels because of their excellent sequence addressability and flexible tunability in bond energy. However, the mechanical responses of most DNA gels are complicated and unpredictable. Here, a DNA gel with a highly homogeneous gel network and well predictable mechanical behaviors is demonstrated by using a pair of star-polymer-DNA precursors with presimulated DNA sequences showing the two-state transition. The melting curve analysis of the DNA gels reveals the good correspondence between the thermodynamic potentials of the DNA crosslinkers and the presimulated values by DNA calculators. Stress-relaxation tests and dissociation kinetics measurements show that the macroscopic relaxation time of the DNA gels is approximately equal to the lifetime of the DNA crosslinkers over 4 orders of magnitude from 0.1-2000 s. Furthermore, a series of durability tests find the DNA gels are hysteresis-less and self-healable after the applications of repeated temperature and mechanical stimuli. These results demonstrate the great potential of star-polymer-DNA precursors for building gels with predictable and tunable viscoelastic properties, suitable for applications such as stress-response extracellular matrices, injectable solids, and soft robotics.