ABSTRACT
We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of 87Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each mF state, resulting in multiple spectral peaks in the EIT-AT spectrum. A simplified analytical formula was developed to explain the EIT-AT spectrum in a static magnetic field, and the theoretical calculations agree qualitatively with experimental results. The Rydberg atom microwave electric field sensor performance was enhanced by making use of the splitting interval between the two maximum absolute mF states separated by the static magnetic field, which was attributed to the stronger Clebsch-Gordon coefficients between the extreme mF states and the frequency detuning of the microwave electric field under the static magnetic field. The traceable measurement limit of weak electric field by EIT-AT splitting method was extended by an order of magnitude, which is promising for precise microwave electric field measurement.
ABSTRACT
A Rydberg atom-based mixer has opened up a new method to characterize microwave electric fields such as the precise measurement of their phase and strength. This study further demonstrates, theoretically and experimentally, a method to accurately measure the polarization of a microwave electric field based on a Rydberg atom-based mixer. The results show that the amplitude of the beat note changes with the polarization of the microwave electric field in a period of 180 degrees, and in the linear region a polarization resolution better than 0.5 degree can be easily obtained which reaches the best level by a Rydberg atomic sensor. More interestingly, the mixer-based measurements are immune to the polarization of the light field that forms the Rydberg EIT. This method considerably simplifies theoretical analysis and the experimental system required for measuring microwave polarization using Rydberg atoms and is of interest in microwave sensing.
ABSTRACT
We herein developed and demonstrated a Zeeman frequency modulation scheme for improving the signal-to-noise ratio of microwave electric field measurement using Rydberg atoms. The spectra of the electromagnetically induced transparency (EIT) and Autler-Townes splitting of Rydberg atoms is frequency modulated by an alternating current magnetic field. The signal-to-noise ratio of the corresponding dispersive error signal is enhanced more than 10 times than that of the original spectrum. Furthermore, we show that the slope of the dispersive error signal near the resonance of the Rydberg EIT can be used to characterize the weak microwave electric field amplitudes. The more intuitive and simpler structure compared with other existing frequency modulation technologies greatly reduces the difficulties of experiments and experimental data analysis.
ABSTRACT
We herein develop and demonstrate a stable frequency-locking scheme for Rydberg atomic experiments. We use the Zeeman effect to modulate the three-level ladder-type Rydberg electromagnetically induced transparency (EIT) signal to lock the laser frequency of the coupling light for transition from its intermediate state to a Rydberg state. The effects of polarization of the probe and coupling lights, and the amplitude of the AC modulated magnetic field ${{\boldsymbol B}_0}$B0 on the EIT and the corresponding dispersive error signal, are both analyzed. The results show that both the EIT signal and dispersive error signal are the strongest when the polarizations of coupling and probe fields are circular and equal. The signal-to-noise ratio of the dispersive error signal increases with ${{\boldsymbol B}_0}$B0. The slope of the dispersive error signal increases first and then decreases with ${{\boldsymbol B}_0}$B0, which is related to the increase of the EIT linewidth caused by the higher ${{\boldsymbol B}_0}$B0. The linewidth of the laser is significantly less than 500 kHz after frequency locking, which satisfies the requirements of most experiments involving Rydberg atoms. The method proposed herein can generally be applied to any cascade system of Rydberg atoms.
