Enhancing sludge methanogenesis with changed micro-environment of anaerobic microorganisms by Fenton iron mud.

Conductive materials have been demonstrated to enhance sludge methanogenesis, but few researches have concentrated on the interaction among conductive materials, microorganisms and their immediate living environment. In this study, Fenton iron mud with a high abundance of Fe(III) was recycled and applied in anaerobic reactors to promote anaerobic digestion (AD) process. The results show that the primary content of extracellular polymeric substances (EPS) such as polysaccharides and proteins increased significantly, possibly promoting microbial aggregation. Furthermore, with the increment of redox mediators including humic substances in EPS and Fe(III) introduced by Fenton iron mud, the direct interspecies electron transfer (DIET) between methanogens and interacting bacteria could be accelerated, which enhanced the rate of methanogenesis in anaerobic digestion (35.21 ± 4.53% increase compared to the control). The further analysis of the anaerobic microbial community confirmed the fact that Fenton iron mud enriched functional microorganisms, such as the abundance of CO2-reducing (e.g. Chloroflexi) and Fe(III)-reducing bacteria (e.g., Tepidimicrobium), thereby expediting the electron transfer reaction in the AD process via microbial DIET and dissimilatory iron reduction (DIR). This work will make it possible for using the recycled hazardous material - Fenton iron mud to improve the performance of anaerobic granular sludge during methanogenesis.

Structure regulated 3D flower-like lignin-based anode material for lithium-ion batteries and its storage kinetics.

As a green sustainable material, lignin-derived porous carbon (LPC) exhibits great application potential when used as the anode material in lithium-ion batteries (LIBs), but the applications are limited by the heterogeneity of the lignin precursor. Therefore, it is crucial to reveal the relationship among lignin properties, porous carbon structure and the kinetics of lithium-ion storage. Herein, LPCs from fractionated lignin have been prepared by an eco-friendly and recyclable activator. The structure of the LPCs was regulated by adjusting the molecular weight, linkage abundance and glass transition temperature (Tg) of lignin macromolecules. As the anode material of LIBs, the prepared 3D flower-like LPCE70 could achieve a reversible capacity of 528 mAh g-1 at a current density of 0.2 A g-1 after 200 cycles, 63 % higher than that of commercial graphite. Furthermore, kinetic calculations of lithium-ion storage behavior of LPCs were firstly used to confirm the contribution ratio of diffusion-controlled behavior and capacitive effect. Lignin with a high linkage abundance could yield LPCE70 with the largest interlayer spacing and specific surface area to maximize lithium-ion storage from both diffusion-controlled and capacitive contributions of specific capacities. This work provides a green, facile and effective pathway for value-added utilization of lignin in LIBs.

Spider-web-inspired cellulose nanofibrils networking polyaniline-encapsulated silica nanoparticles as anode material of lithium-ion batteries.

As the promising anode material of lithium-ion batteries (LIBs), SiO2 has high theoretical capacity, but the volume expansion severely hinders its application. To address the challenge, inspired by the highly flexible spider-web architecture, the SiO2@carbonized polyaniline/carbonized 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibrils (SiO2@cPANI/cTOCNFs) composite was designed, and fabricated via carbonizing the freeze-dried SiO2@PANI/TOCNFs. The resultant SiO2@cPANI/cTOCNFs composite exhibited unique spider-web-like nanostructures, providing a double-layer carbon network to protect SiO2 anode material. The results showed that, the SiO2@cPANI/cTOCNFs composite as anode material of LIBs offered a reversible capacity of 1103 mAh g-1 at a current density of 0.1 A g-1 after 200 cycles, and gave a capacity of 302 mAh g-1 after 1000 cycles at a current density of 1 A g-1, exhibiting excellent cycling stability. This study provides a strategy of spider-web-inspired cellulose nanofibrils networking polyaniline-encapsulated silica nanoparticles as anode material of LIBs.