Doping management for high-power fiber lasers: 100 W, few-picosecond pulse generation from an all-fiber-integrated amplifier.

Thermal effects, which limit the average power, can be minimized by using low-doped, longer gain fibers, whereas the presence of nonlinear effects requires use of high-doped, shorter fibers to maximize the peak power. We propose the use of varying doping levels along the gain fiber to circumvent these opposing requirements. By analogy to dispersion management and nonlinearity management, we refer to this scheme as doping management. As a practical first implementation, we report on the development of a fiber laser-amplifier system, the last stage of which has a hybrid gain fiber composed of high-doped and low-doped Yb fibers. The amplifier generates 100 W at 100 MHz with pulse energy of 1 µJ. The seed source is a passively mode-locked fiber oscillator operating in the all-normal-dispersion regime. The amplifier comprises three stages, which are all-fiber-integrated, delivering 13 ps pulses at full power. By optionally placing a grating compressor after the first stage amplifier, chirp of the seed pulses can be controlled, which allows an extra degree of freedom in the interplay between dispersion and self-phase modulation. This way, the laser delivers 4.5 ps pulses with ~200 kW peak power directly from fiber, without using external pulse compression.

1 mJ pulse bursts from a Yb-doped fiber amplifier.

We demonstrate burst-mode operation of a polarization-maintaining Yb-doped fiber amplifier capable of generating 60 µJ pulses within bursts of 11 pulses with extremely uniform energy distribution facilitated by a novel feedback mechanism shaping the seed of the burst-mode amplifier. The burst energy can be scaled up to 1 mJ, comprising 25 pulses with 40 µJ average individual energy. The amplifier is synchronously pulse pumped to minimize amplified spontaneous emission between the bursts. Pulse propagation is entirely in fiber and fiber-integrated components until the grating compressor, which allows for highly robust operation. The burst repetition rate is set to 1 kHz and spacing between individual pulses is 10 ns. The 40 µJ pulses are externally compressible to a full width at half-maximum of 600 fs. However, due to the substantial pedestal of the compressed pulses, the effective pulse duration is longer, estimated to be 1.2 ps.

Emergence of West Nile virus infections in humans in Turkey, 2010 to 2011.

In 2010, 47 human cases of West Nile virus (WNV)infection, including 12 laboratory-confirmed and 35 probable cases, were identified in Turkey. These were the first cases detected during routine surveillance.The patients were from 15 provinces, mainly located in the western part of the country. Incidence was 0.19/100,000 with a maximum of 1.39 in Sakarya province.Forty of the total 47 cases showed neuroinvasive manifestation. Median age was 58 years with a range of four to 86. Ten of the patients died. Enhanced surveillance in humans and animals and mosquito control measures were implemented. The WNV infections were included in the national notifiable diseases list as of April 2011. In 2011, three probable and two confirmed cases of WNV infection were diagnosed in provinces where infections had been detected in the previous year, supporting a lower activity than 2010. However,detection of WNV infections in humans in 2010 and 2011 consecutively, may indicate that WNV has become endemic in the western part of Turkey. Field epidemiological studies were undertaken to understand more about the nature of infection in Turkey.

Fiber amplification of pulse bursts up to 20 µJ pulse energy at 1 kHz repetition rate.

We demonstrate burst-mode operation of a polarization-maintaining Yb-doped fiber amplifier. Groups of pulses with a temporal spacing of 10 ns and 1 kHz overall repetition rate are amplified to an average pulse energy of ∼20 µJ and total burst energy of 0.25 mJ. The pulses are externally compressed to ∼400 fs. The amplifier is synchronously pulsed-pumped to minimize amplified spontaneous emission between the bursts. We characterize the influence of pump pulse duration, pump-to-signal delay, and signal burst length.

Microjoule-energy, 1 MHz repetition rate pulses from all-fiber-integrated nonlinear chirped-pulse amplifier.

We demonstrate generation of pulses with up to 4 microJ energy at 1 MHz repetition rate through nonlinear chirped-pulse amplification in an entirely fiber-integrated amplifier, seeded by a fiber oscillator. The peak power and the estimated nonlinear phase shift of the amplified pulses are as much as 57 kW and 22pi, respectively. The shortest compressed pulse duration of 140 fs is obtained for 3.1 microJ of uncompressed amplifier output energy at 18pi of nonlinear phase shift. At 4 microJ of energy, the nonlinear phase shift is 22pi and compression leads to 170-fs-long pulses. Numerical simulations are utilized to model the experiments and identify the limitations. Amplification is ultimately limited by the onset of Raman amplification of the longer edge of the spectrum with an uncompressible phase profile.