Features of bacterial and fungal communities in the rhizosphere of Gastrodia elata cultivated in greenhouse for early harvest.

Symbiotic microbes are essential for developing and growing Gastrodia elata, an achlorophyllous orchid of high medicinal value. Recently, the cultivation of G. elata in greenhouses has been adopted in Korea to produce mature tubers in a short time. However, no studies have been conducted on the microbial community structure of G. elata cultivated in greenhouse environments. Therefore, we analyzed the temporal features of bacterial and fungal communities in the rhizosphere of G. elata at the juvenile [JT; 2 months after sowing (MAS)], young (YT; 6 MAS), and mature (MT; 11 MAS) tuber stages using culture-dependent and high-throughput sequencing technology. The richness and diversity of the bacterial and fungal communities decreased with tuber growth of G. elata. The symbiotic fungi Mycena sp. and Armillaria sp. as well as tuber extract inhibited the growth of various soil-inhabiting fungal and bacterial strains, indicating that G. elata and its symbiotic fungi play important roles in the selection of rhizosphere microbes. Mortierella rishikesha was the most abundant fungal species in the rhizosphere. We also identified the microorganisms potentially beneficial for G. elata development during greenhouse cultivation. Tubers and symbiotic fungi actively exert selective pressure on rhizosphere microbes, influencing the diversity and abundance of bacterial and fungal communities as G. elata grows. This study is a first report on the temporal microbial community structure of G. elata cultivated in greenhouse. The results on the associated microbiome of G. elata will help understand their beneficial interactions with G. elata and contribute to improvement in cultivation.

Gastrodia elata rhizoma ameliorates thioacetamide-induced liver injury in dogs.

Objective: The study aimed to investigate the hepatoprotective effects of Gastrodia elata rhizome (GR) on thioacetamide (TAA)-induced liver injury in dogs. We evaluated serum biochemical and hematological parameters, with emphasis on alanine transaminase (ALT), alanine phosphates (ALP), and nitric oxide (NO) levels, in dogs with TAA-induced liver injury. Materials and Methods: The animals were divided into a control group (Con), TAA group, Silymarin group (Sil, 50 mg/kg), Gastrodia rhizome low dose (GRL) (low) + TAA, GRH (high) + TAA, and GR high-dose group (GRH) control group. GRL and GRH were given daily at 50 and 100 mg/kg, respectively. TAA was given on days 1, 4, and 7 at a dose of 300 mg/kg. Results: GR significantly reduced liver injury in treated animals, as indicated by lowered levels of ALT (about 32% at day 21 in both GRL + TAA and GRH + TAA groups), ALP (about 17% and 21% at day 21 in both GRL + TAA, GRH + TAA groups, respectively), and NO (about 36% at day 21 in both GRL + TAA, GRH + TAA groups) compared to the TAA control group. Hematological parameters showed mild changes during the experiment. High-performance liquid chromatography analysis revealed gastrodin, a major component of the GR extract, constitutes 2.6% of the extract. Conclusion: The GR demonstrated significant hepatoprotective effects against TAA-induced liver injury in dogs. The study provides evidence for the potential therapeutic use of GR in the management of liver diseases.

Anti-Osteoarthritic Effects of Cartilage-Derived Extracellular Matrix in a Rat Osteoarthritis Model.

BACKGROUND: The extracellular matrix (ECM) has many functions, such as segregating tissues, providing support, and regulating intercellular communication. Cartilage-derived ECM (CECM) can be prepared via consecutive processes of chemical decellularization and enzyme treatment. The purpose of this study was to improve and treat osteoarthritis (OA) using porcine knee articular CECM. METHODS: We assessed the rheological characteristics and pH of CECM solutions. Furthermore, we determined the effects of CECM on cell proliferation and cytotoxicity in the chondrocytes of New Zealand rabbits. The inhibitory effect of CECM on tumor necrosis factor (TNF)-α-induced cellular apoptosis was assessed using New Zealand rabbit chondrocytes and human synoviocytes. Finally, we examined the in vivo effects of CECM on inflammation control and cartilage degradation in an experimental OA-induced rat model. The rat model of OA was established by injecting monosodium iodoacetate into the intra-articular knee joint. The rats were then injected with CECM solution. Inflammation control and cartilage degradation were assessed by measuring the serum levels of proinflammatory cytokines and C-telopeptide of type II collagen and performing a histomorphological analysis. RESULTS: CECM was found to be biocompatible and non-immunogenic, and could improve cell proliferation without inducing a toxic reaction. CECM significantly reduced cellular apoptosis due to TNF-α, significantly improved the survival of cells in inflammatory environments, and exerted anti-inflammatory effects. CONCLUSION: Our findings suggest that CECM is an appropriate injectable material that mediates OA-induced inflammation.

Marine Biological Macromolecules and Chemically Modified Macromolecules; Potential Anticoagulants.

Coagulation is a potential defense mechanism that involves activating a series of zymogens to convert soluble fibrinogen to insoluble fibrin clots to prevent bleeding and hemorrhagic complications. To prevent the extra formation and diffusion of clots, the counterbalance inhibitory mechanism is activated at levels of the coagulation pathway. Contrariwise, this system can evade normal control due to either inherited or acquired defects or aging which leads to unusual clots formation. The abnormal formations and deposition of excess fibrin trigger serious arterial and cardiovascular diseases. Although heparin and heparin-based anticoagulants are a widely prescribed class of anticoagulants, the clinical use of heparin has limitations due to the unpredictable anticoagulation, risk of bleeding, and other complications. Hence, significant interest has been established over the years to investigate alternative therapeutic anticoagulants from natural sources, especially from marine sources with good safety and potency due to their unique chemical structure and biological activity. This review summarizes the coagulation cascade and potential macromolecular anticoagulants derived from marine flora and fauna.

Efficient Photon Extraction in Top-Emission Organic Light-Emitting Devices Based on Ampicillin Microstructures.

The desire to enhance the efficiency of organic light-emitting devices (OLEDs) has driven to the investigation of advanced materials with fascinating properties. In this work, the efficiency of top-emission OLEDs (TEOLEDs) is enhanced by introducing ampicillin microstructures (Amp-MSs) with dual phases (α-/ß-phase) that induce photoluminescence (PL) and electroluminescence (EL). Moreover, Amp-MSs can adjust the charge balance by Fermi level (EF ) alignment, thereby decreasing the leakage current. The decrease in the wave-guided modes can enhance the light outcoupling through optical scattering. The resulting TEOLED demonstrates a record-high external quantum efficiency (EQE) (maximum: 68.7% and average: 63.4% at spectroradiometer; maximum: 44.8% and average: 42.6% at integrating sphere) with a wider color gamut (118%) owing to the redshift of the spectrum by J-aggregation. Deconvolution of the EL intensities is performed to clarify the contribution of Amp-MSs to the device EQE enhancement (optical scattering by Amp-MSs: 17.0%, PL by radiative energy transfer: 9.1%, and EL by J-aggregated excitons: 4.6%). The proposed TEOLED outperforms the existing frameworks in terms of device efficiency.

Low-temperature solution-processed SnO2 electron transport layer modified by oxygen plasma for planar perovskite solar cells.

SnO2 has attracted significant attention as an electron transport layer (ETL) because of its wide optical bandgap, electron mobility, and transparency. However, the annealing temperature of 180 °C-200 °C, as reported by several studies, for the fabrication of SnO2 ETL limits its application for flexible devices. Herein, we demonstrated that the low-temperature deposition of SnO2 ETL and further surface modification with oxygen plasma enhances its efficiency from 2.3% to 15.30%. Oxygen plasma treatment improves the wettability of the low-temperature processed SnO2 ETL that results in a larger perovskite grain size. Hence, oxygen plasma treatment effectively improves the efficiency of perovskite solar cells at a low temperature and is compatible with flexible applications.

Compact SnO2/Mesoporous TiO2 Bilayer Electron Transport Layer for Perovskite Solar Cells Fabricated at Low Process Temperature.

Charge transport layers have been found to be crucial for high-performance perovskite solar cells (PSCs). SnO2 has been extensively investigated as an alternative material for the traditional TiO2 electron transport layer (ETL). The challenges facing the successful application of SnO2 ETLs are degradation during the high-temperature process and voltage loss due to the lower conduction band. To achieve highly efficient PSCs using a SnO2 ETL, low-temperature-processed mesoporous TiO2 (LT m-TiO2) was combined with compact SnO2 to construct a bilayer ETL. The use of LT m-TiO2 can prevent the degradation of SnO2 as well as enlarge the interfacial contacts between the light-absorbing layer and the ETL. SnO2/TiO2 bilayer-based PSCs showed much higher power conversion efficiency than single SnO2 ETL-based PSCs.

Improved device efficiency and lifetime of perovskite light-emitting diodes by size-controlled polyvinylpyrrolidone-capped gold nanoparticles with dipole formation.

Herein, an unprecedented report is presented on the incorporation of size-dependent gold nanoparticles (AuNPs) with polyvinylpyrrolidone (PVP) capping into a conventional hole transport layer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The hole transport layer blocks ion-diffusion/migration in methylammonium-lead-bromide (MAPbBr3)-based perovskite light-emitting diodes (PeLEDs) as a modified interlayer. The PVP-capped 90 nm AuNP device exhibited a seven-fold increase in efficiency (1.5%) as compared to the device without AuNPs (0.22%), where the device lifetime was also improved by 17-fold. This advancement is ascribed to the far-field scattering of AuNPs, modified work function and carrier trapping/detrapping. The improvement in device lifetime is attributed to PVP-capping of AuNPs which prevents indium diffusion into the perovskite layer and surface ion migration into PEDOT:PSS through the formation of induced electric dipole. The results also indicate that using large AuNPs (> 90 nm) reduces exciton recombination because of the trapping of excess charge carriers due to the large surface area.

Blind and Compact Denoising Network Based on Noise Order Learning.

A lightweight blind image denoiser, called blind compact denoising network (BCDNet), is proposed in this paper to achieve excellent trade-offs between performance and network complexity. With only 330K parameters, the proposed BCDNet is composed of the compact denoising network (CDNet) and the guidance network (GNet). From a noisy image, GNet extracts a guidance feature, which encodes the severity of the noise. Then, using the guidance feature, CDNet filters the image adaptively according to the severity to remove the noise effectively. Moreover, by reducing the number of parameters without compromising the performance, CDNet achieves denoising not only effectively but also efficiently. Experimental results show that the proposed BCDNet yields state-of-the-art or competitive denoising performances on various datasets while requiring significantly fewer parameters.

Comparison of actual amount of movement with surgical treatment objective in the orthognathic maxillary repositioning.

OBJECTIVE: To compare the postoperative position of the maxilla with the surgical treatment objectives (STO) in bimaxillary orthognathic surgery for evaluating the surgical accuracy and investigating the pattern and cause of the discrepancy. METHODS: Patients undergoing conventional bimaxillary orthognathic surgery by a single oral and maxillofacial surgeon were enrolled. Utilizing the superimposition of preoperative and postoperative computed tomography images, the actual amounts of positional change of both the maxillary central incisor and first molars were compared with those of STO. All the patients were divided into two groups according to the actual discrepancy between STO and the postoperative position and factors that may affect surgical accuracy were analyzed. RESULTS: In 62 cases, the absolute mean value of the positional difference between STO and the actual outcome was 2.20 mm (X-axis, 0.93 mm; Y-axis, 1.31 mm; and Z-axis, 1.09 mm) in the maxillary central incisor. The signed mean value of the central incisor was -0.07 mm, 0.79 mm, and -0.57 mm in the X-, Y-, and Z-axes, respectively, and the value in the Y- and Z-axes showed a statistically significant difference in comparison with STO (P<0.01). Age, sex, skeletal Angle classification, maxillary and mandibular profile, use of 3D virtual surgery, facial asymmetry, and yawing correction did not show a statistically significant correlation with surgical accuracy at the central incisor. CONCLUSION: There was an acceptable range of discrepancy between postoperative maxillary position and STO after orthognathic surgery; however, there was a tendency for posterior and downward movement in the maxillary anterior teeth.

Enhanced Polymerization and Surface Hardness of Colloidal Siloxane Films via Electron Beam Irradiation.

Electron beam (EB) curing is a foldable hard coating process and has attracted significant research attention in the field of flexible electronic devices. In this study, we report a method for enhancing material surface hardness with low-energy EB curing in a short time. The low-energy EB improved the coating hardness of films by inducing cross-linking polymerization of the silicon-containing monomer. The hardness of the cured coating layer was measured as 3 H using a pencil hardness tester, and the transparency of the coating was higher than 90%. Owing to a series of cross-linking reactions between Si-O-C and Si-OH groups under EB curing and the formation of Si-Si bonds, the cured layer exhibited remarkable durability in the 100000-flexible cycle test. Additionally, the natural oxidation of the C-O groups on the surface of the coating formed carboxyl groups that improved the hydrophilic properties of the coating layer. To the best of our knowledge, this is the first study to propose that the hardness of polyethylene terephthalate films can be improved using low-energy EBs to rapidly cure silicon-containing coatings. Our results provide a novel and commercially viable approach for improving the hardness of touch screens and foldable displays.

Highly efficient, heat dissipating, stretchable organic light-emitting diodes based on a MoO3/Au/MoO3 electrode with encapsulation.

Stretchable organic light-emitting diodes are ubiquitous in the rapidly developing wearable display technology. However, low efficiency and poor mechanical stability inhibit their commercial applications owing to the restrictions generated by strain. Here, we demonstrate the exceptional performance of a transparent (molybdenum-trioxide/gold/molybdenum-trioxide) electrode for buckled, twistable, and geometrically stretchable organic light-emitting diodes under 2-dimensional random area strain with invariant color coordinates. The devices are fabricated on a thin optical-adhesive/elastomer with a small mechanical bending strain and water-proofed by optical-adhesive encapsulation in a sandwiched structure. The heat dissipation mechanism of the thin optical-adhesive substrate, thin elastomer-based devices or silicon dioxide nanoparticles reduces triplet-triplet annihilation, providing consistent performance at high exciton density, compared with thick elastomer and a glass substrate. The performance is enhanced by the nanoparticles in the optical-adhesive for light out-coupling and improved heat dissipation. A high current efficiency of ~82.4 cd/A and an external quantum efficiency of ~22.3% are achieved with minimum efficiency roll-off.

Light Field Super-Resolution via Adaptive Feature Remixing.

A novel light field super-resolution algorithm to improve the spatial and angular resolutions of light field images is proposed in this work. We develop spatial and angular super-resolution (SR) networks, which can faithfully interpolate images in the spatial and angular domains regardless of the angular coordinates. For each input image, we feed adjacent images into the SR networks to extract multi-view features using a trainable disparity estimator. We concatenate the multi-view features and remix them through the proposed adaptive feature remixing (AFR) module, which performs channel-wise pooling. Finally, the remixed feature is used to augment the spatial or angular resolution. Experimental results demonstrate that the proposed algorithm outperforms the state-of-the-art algorithms on various light field datasets. The source codes and pre-trained models are available at https://github.com/keunsoo-ko/ LFSR-AFR.

Characterization of optical manipulation using microlens arrays depending on the materials and sizes in organic photovoltaics.

Various physical structures have improved light-harvesting and power-conversion efficiency in organic photovoltaic devices, and optical simulations have supported the improvement of device characteristics. Herein, we experimentally investigated how microlens arrays manipulate light propagation in microlens films and material stacks for organic photovoltaics to understand the influence of the constituent materials and sizes of the microlens. As materials to fabricate a microlens array, poly(dimethylsiloxane) and Norland Optical Adhesive 63 were adopted. The poly(dimethylsiloxane) microlens array exhibited higher total transmittance and higher diffuse transmittance, further enhancing the effective optical path and light extinction in material stacks for organic photovoltaics. This resulted in more current generation in an organic photovoltaic device with a poly(dimethylsiloxane) microlens array than in a Norland Optical Adhesive 63 microlens array. The sizes of the microlenses were controlled from 0.5 to 10 µm. The optical characteristics of microlens array films and material stacks with microlenses generally increased with size of the microlens, leading to a 10.6% and 16.0% improvement in the light extinction and power-conversion efficiency, respectively. In addition, electron and current generation in material stacks for organic photovoltaics were calculated from light extinction. The theoretical current generation matched well with experimental values derived from organic photovoltaic devices. Thus, the optical characterization of physical structures helps to predict how much more current can be generated in organic photovoltaic cells with a certain physical structure; it can also be used for screening the physical structures of organic photovoltaic cells.

3D PCL/fish collagen composite scaffolds incorporating osteogenic abalone protein hydrolysates for bone regeneration application: in vitro and in vivo studies.

Three-dimensional (3 D) printing is an effective technology that has shown considerable potential for use in tissue regeneration. Of the many materials that have been proposed for this purpose, poly (ε-caprolactone) (PCL) 3 D scaffolds have been received significant attention in the bone tissue engineering field due to its advantageous mechanical properties and biocompatibility. In this study, a novel method was developed for tissue-engineered bone that combines PCL 3 D scaffolds with fish collagen (Col) and the osteogenic abalone intestine gastro-intestinal digests (AIGIDs) from Haliotis discus hannai. And then, mouse mesenchymal stem cells (MSCs) were seeded onto the fabricated scaffolds. After in vitro culturing, the proliferation of the MSCs on the scaffolds, alkaline phosphatase (ALP) activity, and the amount of deposited calcium were investigated. The results indicated that the ALP activity and mineralization in PCL/AIGIDs/Col was higher than that of the other scaffolds. In an in vivo experiment, the two fabricated scaffolds were implanted in a rabbit tibia. PCL/AIGIDs/Col group exhibited strong osteoinduction capability in the rabbit tibia defect model. These stimulated biological responses in vitro and in vivo suggest that the PCL/AIGIDs/Col scaffold are promising material for use in tissue implants and bone regeneration.

Simple Fabrication of Transparent, Colorless, and Self-Disinfecting Polyethylene Terephthalate Film via Cold Plasma Treatment.

Cross-infection following cross-contamination is a serious social issue worldwide. Pathogens are normally spread by contact with germ-contaminated surfaces. Accordingly, antibacterial surface technologies are urgently needed and have consequently been actively developed in recent years. Among these technologies, biomimetic nanopatterned surfaces that physically kill adhering bacteria have attracted attraction as an effective technological solution to replace toxic chemical disinfectants (biocides). Herein, we introduce a transparent, colorless, and self-disinfecting polyethylene terephthalate (PET) film that mimics the surface structure of the Progomphus obscurus (sanddragon) wing physically killing the attached bacteria. The PET film was partially etched via a 4-min carbon tetrafluoride (CF4) plasma treatment. Compared to a flat bare PET film, the plasma-treated film surface exhibited a uniform array structure composed of nanopillars with a 30 nm diameter, 237 nm height, and 75 nm pitch. The plasma-treated PET film showed improvements in optical properties (transmittance and B*) and antibacterial effectiveness over the bare film; the transparency and colorlessness slightly increased, and the antibacterial activity increased from 53.8 to 100% for Staphylococcus aureus, and from 0 to 100% for Escherichia coli. These results demonstrated the feasibility of the CF4 plasma-treated PET film as a potential antibacterial overcoating with good optical properties.

Enhancement of Antibacterial Performance of Silver Nanowire Transparent Film by Post-Heat Treatment.

Silver nanomaterials (AgNMs) have been applied as antibacterial agents to combat bacterial infections that can cause disease and death. The antibacterial activity of AgNMs can be improved by increasing the specific surface area, so significant efforts have been devoted to developing various bottom-up synthesis methods to control the size and shape of the particles. Herein, we report on a facile heat-treatment method that can improve the antibacterial activity of transparent silver nanowire (AgNW) films in a size-controllable, top-down manner. AgNW films were fabricated via spin-coating and were then heated at different temperatures (230 and 280 °C) for 30 min. The morphology and the degree of oxidation of the as-fabricated AgNW film were remarkably sensitive to the heat-treatment temperature, while the transparency was insensitive. As the heat-treatment temperature increased, the AgNWs spontaneously broke into more discrete wires and droplets, and oxidation proceeded faster. The increase in the heat-treatment temperature further increased the antibacterial activity of the AgNW film, and the heat treatment at 280 °C improved the antibacterial activity from 31.7% to 94.7% for Staphylococcus aureus, and from 57.0% to 98.7% for Escherichia coli. Following commonly accepted antibacterial mechanisms of AgNMs, we present a correlation between the antibacterial activity and surface observations of the AgNW film.

Three-Dimensional Convolutional Neural Network for Prostate MRI Segmentation and Comparison of Prostate Volume Measurements by Use of Artificial Neural Network and Ellipsoid Formula.

OBJECTIVE. The purposes of this study were to assess the performance of a 3D convolutional neural network (CNN) for automatic segmentation of prostates on MR images and to compare the volume estimates from the 3D CNN with those of the ellipsoid formula. MATERIALS AND METHODS. The study included 330 MR image sets that were divided into 260 training sets and 70 test sets for automated segmentation of the entire prostate. Among these, 162 training sets and 50 test sets were used for transition zone segmentation. Assisted by manual segmentation by two radiologists, the following values were obtained: estimates of ground-truth volume (VGT), software-derived volume (VSW), mean of VGT and VSW (VAV), and automatically generated volume from the 3D CNN (VNET). These values were compared with the volume calculated with the ellipsoid formula (VEL). RESULTS. The Dice similarity coefficient for the entire prostate was 87.12% and for the transition zone was 76.48%. There was no significant difference between VNET and VAV (p = 0.689) in the test sets of the entire prostate, whereas a significant difference was found between VEL and VAV (p < 0.001). No significant difference was found among the volume estimates in the test sets of the transition zone. Overall intraclass correlation coefficients between the volume estimates were excellent (0.887-0.995). In the test sets of entire prostate, the mean error between VGT and VNET (2.5) was smaller than that between VGT and VEL (3.3). CONCLUSION. The fully automated network studied provides reliable volume estimates of the entire prostate compared with those obtained with the ellipsoid formula. Fast and accurate volume measurement by use of the 3D CNN may help clinicians evaluate prostate disease.