ABSTRACT
In the III-V family of colloidal quantum dot (CQD) semiconductors, InSb promises access to a wider range of infrared wavelengths compared to many light-sensing material candidates. However, achieving the necessary size, size-dispersity, and optical properties has been challenging. Here the synthetic challenges associated with InSb CQDs are investigated and it is found that uncontrolled reduction of the antimony precursor hampers the controlled growth of CQDs. To overcome this, a synthetic strategy that combines nonpyrophoric precursors with zinc halide additives is developed. The experimental and computational studies show that zinc halide additives decelerate the reduction of the antimony precursor, facilitating the growth of more uniformly sized CQDs. It is also found that the halide choice provides additional control over the strength of this effect. The resultant CQDs exhibit well-defined excitonic transitions in spectral range of 1.26-0.98 eV, along with strong photoluminescence. By implementing a postsynthesis ligand exchange, colloidally stable inks enabling the fabrication of high-quality CQD films are achieved. The first demonstration of InSb CQD photodetectors is presented reaching 75% external quantum efficiency (QE) at 1200 nm, to the knowledge the highest short-wave infrared (SWIR) QE reported among heavy-metal-free infrared CQD-based devices.
ABSTRACT
Microcystis aeruginosa (M. aeruginosa) cause the eutrophication of lakes and rivers. To effectively control the overgrowth of M. aeruginosa, a suitable measurement method should be required in the aquatic fields. To address this, we developed a field-ready cyanobacterial pretreatment device and an electrochemical clustered regularly interspaced short palindromic repeats (EC-CRISPR) biosensor. The cyanobacterial pretreatment device consists of a syringe, glass bead, and graphene oxide (GO) bead. Then, the M. aeruginosa dissolved in the freshwater sample was added to fabricated filter. After filtration, the purified gene was loaded onto a CRISPR-based electrochemical biosensor chip to detect M. aeruginosa gene fragments. The biosensor was composed of CRISPR/Cpf1 protein conjugated with MXene on an Au microgap electrode (AuMGE) integrated into a printed circuit board (PCB). This AuMGE/PCB system maximizes the signal-to-noise ratio, which controls the working and counter electrode areas requiring only 3 µL samples to obtain high reliability. Using the extracted M. aeruginosa gene with a pre-treatment filter, the CRISPR biosensor showed a limit of detection of 0.089 pg/µl in fresh water. Moreover, selectivity test and matrix condition test carried out using the EC-CRISPR biosensor. These handheld pre-treatment kit and biosensors can enable field-ready detection of CyanoHABs.
ABSTRACT
Peracetic acid (PAA) is a strong oxidizing agent and is considered an ideal disinfectant because of its excellent disinfecting effect at low concentration, low corrosiveness, and relatively low cost. Commercially available PAA solution is a mixture of PAA, acetic acid, and hydrogen peroxide. However, PAA naturally decomposes faster than hydrogen peroxide. Therefore, accurately quantifying the concentration of PAA in the PAA peroxide mixture via a simple method is important. In the present study, a new method was developed, in which the spectral change of I- ion at 226 nm and the absorption value from the generated I2 at 460 nm were used to determine the concentration of PAA, following a chemical reaction with 0.1 mM potassium iodide (KI) solution without the use of any other chemicals. In this work, the measurable concentration of PAA was as low as 0.0001 wt% (13.1 µM) and as high as 0.0015 wt% (197.2 µM), which matches well with high linearity (99.95% at 226 nm and 99.91% at 460 nm). This work could also be the high selectivity method toward PAA in the PAA peroxide mixture.
ABSTRACT
Hydrogen peroxide (H2O2) is widely used in the synthesis of organic chemicals, bleaching of paper pulp, and the treatment of wastewater and as a food additive, important mediator of redox processes in natural water, and a disinfectant. However, H2O2 stock solution is unstable and slowly decomposes when exposed to, for example, light, elevated temperatures, or metal compounds. Therefore, the ability to measure the exact concentration of H2O2 stock solution is important for its proper use in diverse applications. This work proposes a simple method for the spectrophotometric determination of H2O2 solution via chemical reaction with sodium hypochlorite that is inexpensive and easy to acquire. The proposed method is based on the stoichiometric spectral change of hypochlorite ion at 292.5 nm following a redox reaction with a sample solution of H2O2. Due to high relationship between the spectral delta value and the applied H2O2 concentration (0.00188-0.03000%), H2O2 stock solution can be easily quantified.
ABSTRACT
Objectives: Restrictive spirometric pattern (RSP) has a prevalence of 5.4−9.2% and is associated with various respiratory symptoms, comorbidities, and increased mortality. Breastfeeding has important effects on maternal health; however, the effects of breastfeeding on pulmonary function remain unclear. This study aimed to investigate the effects of breastfeeding on maternal pulmonary function, particularly the risk of RSP. Methods: Retrospective, cross-sectional observational study enrolling parous women aged >40 years who participated in the Korea National Health and Nutrition Examination Survey from 2013−2018. RSP was defined using the FEV1/FVC ratio and FVC outcomes of the pulmonary function test. The adjusted odds ratios (OR) for RSP were calculated using multivariate logistic regression. Results: Of 9261 parous women, 913 (9.9%) had RSP. Breastfeeding (≥1 month) was associated with a reduced risk of RSP (OR: 0.75 [0.60−0.92]) when adjusted for age, body mass index, smoking status, other diseases, socioeconomic status, and maternal risk factors. The adjusted ORs for RSP for women decreased further with increasing duration of breastfeeding (p for trend: 0.0004). The FEV1, FVC, and FVC% were higher in women who breastfed than in those who did not breastfeed (by 0.0390 L, 0.0521 L, 0.9540% p, respectively). Conclusions: There is an association between breastfeeding and pulmonary function in parous women. Breastfeeding was associated with a lower prevalence of RSP in parous women aged >40 years old, suggesting that breastfeeding may have a beneficial effect on maternal pulmonary function.
Subject(s)
Cross-Sectional Studies , Humans , Female , Adult , Middle Aged , Nutrition Surveys , Retrospective Studies , Spirometry , Respiratory Function TestsABSTRACT
Bacteria belonging to Streptomyces have the ability to produce a wide range of secondary metabolites through a shift from primary to secondary metabolism regulated by complex networks activated after vegetative growth terminates. Despite considerable effort to understand the regulatory elements governing gene expression related to primary and secondary metabolism in Streptomyces, system-level information remains limited. In this study, we integrated four multi-omics datasets from Streptomyces griseus NBRC 13350: RNA-seq, ribosome profiling, dRNA-seq, and Term-Seq, to analyze the regulatory elements of transcription and translation of differentially expressed genes during cell growth. With the functional enrichment of gene expression in different growth phases, one sigma factor regulon and four transcription factor regulons governing differential gene transcription patterns were found. In addition, the regulatory elements of transcription termination and post-transcriptional processing at transcript 3'-end positions were elucidated, including their conserved motifs, stem-loop RNA structures, and non-terminal locations within the polycistronic operons, and the potential regulatory elements of translation initiation and elongation such as 5'-UTR length, RNA structures at ribosome-bound sites, and codon usage were investigated. This comprehensive genetic information provides a foundational genetic resource for strain engineering to enhance secondary metabolite production in Streptomyces.
ABSTRACT
Realizing bright colloidal infrared emitters in the midwavelength infrared (or mid-IR), which can be used for low-power IR light-emitting diodes (LEDs), sensors, and deep-tissue imaging, has been a challenge for the last few decades. Here, we present colloidal tellurium nanowires with strong emission intensity at room temperature and even lasing at 3.6 µm (ω) under cryotemperature. Furthermore, the second-harmonic field at 1.8 µm (2ω) and the third-harmonic field at 1.2 µm (3ω) are successfully generated thanks to the intrinsic property of the tellurium nanowire. These unique optical features have never been reported for colloidal tellurium nanocrystals. With the colloidal midwavelength infrared (MWIR) Te nanowire laser, we demonstrate its potential in biomedical applications. MWIR lasing has been clearly observed from nanowires embedded in a human neuroblastoma cell, which could further realize deep-tissue imaging and thermotherapy in the near future.
Subject(s)
Colloids/chemistry , Infrared Rays , Lasers , Nanowires/chemistry , Microscopy, Electron, Scanning , Semiconductors , X-Ray DiffractionABSTRACT
The exosome is considered a useful biomarker for the early diagnosis of cancer. However, pretreatment of samples used in diagnosis is time-consuming. Herein, we fabricated a capacitance-based electrical biosensor that requires no pretreatment of the sample; it is composed of a DNA aptamer/molybdenum disulfide (MoS2) heterolayer on an interdigitated micro-gap electrode (IDMGE)/printed circuit board (PCB) system for detecting exosomes in an undiluted serum sample. The DNA aptamer detects the CD63 protein on the exosome as the biomarker, while the MoS2 nanoparticle enhances electrical sensitivity. In this study, for the first time, the IDMGE system was used to amplify the electrical signal efficiently for exosome detection. The IDMGE amplifies the capacitance signal as the gap between electrodes decreases, making it easy to detect the target by utilizing the heightened sensitivity. Moreover, it is possible to immobilize a bio-probe more efficiently than with an electrical sensitivity-enhancing electrode with the same area. The thiol-modified (SH-) CD63 DNA aptamer was introduced as the bio-probe that selectively binds to the CD63 protein on the exosome surface. The capacitance signal from the IDMGE electrical sensor increased linearly with the increase in the concentration of exosomes in human serum expressed on a logarithmic scale, the detection limit being 2192.6 exosomes/mL. The proposed biosensor can detect exosomes in undiluted human serum with high selectivity and sensitivity. A blind test was also carried out to test the reliability of the biosensor. The capacitance-based electrical biosensor thus offers a new platform for cancer diagnosis in the future.
Subject(s)
Aptamers, Nucleotide , Biosensing Techniques , Exosomes , Electric Capacitance , Humans , Reproducibility of ResultsABSTRACT
Middle East respiratory syndrome coronavirus (MERS-CoV) is one of the most harmful viruses for humans in nowadays. To prevent the spread of MERS-CoV, a valid detection method is highly needed. For the first time, a MERS-nanovesicle (NV) biosensor composed of multi-functional DNA aptamer and graphene oxide encapsulated molybdenum disulfide (GO-MoS2) hybrid nanocomposite was fabricated based on electrochemical (EC) and surface-enhanced Raman spectroscopy (SERS) techniques. The MERS-NV aptamer was designed for specifically binding to the spike protein on MERS-NVs and it is prepared using the systematic evolution of ligands by exponential enrichment (SELEX) technique. For constructing a multi-functional MERS aptamer (MF-aptamer), the prepared aptamer was connected to the DNA 3-way junction (3WJ) structure. DNA 3WJ has the three arms that can connect the three individual functional groups including MERS aptamer (bioprobe), methylene blue (signal reporter) and thiol group (linker) Then, GO-MoS2 hybrid nanocomposite was prepared for the substrate of EC/SERS-based MERS-NV biosensor construction. Then, the assembled multifunctional (MF) DNA aptamer was immobilized on GO-MoS2. The proposed biosensor can detect MERS-NVs not only in a phosphate-buffered saline (PBS) solution (SERS LOD: 0.176 pg/ml, EIS LOD: 0.405 pg/ml) but also in diluted 10% saliva (SERS LOD: 0.525 pg/ml, EIS LOD: 0.645 pg/ml).
ABSTRACT
Background: Stroke and myocardial infarction (MI) are medical emergencies, and early treatment within the golden hour is crucial for good prognosis. Adequate knowledge about the warning symptoms can shorten the onset-to-door time. Various factors affect the level of awareness, including social activity. This study aimed to determine if engaging in social activity is associated with the awareness of the warning symptoms of stroke and MI. Methods: This cross-sectional study analyzed 451,793 participants from the 2017 and 2019 Korea Community Health Survey. Based on five questions for each of stroke and MI symptoms, participants were divided into an awareness group (replied "Yes" to all five questions) and unawareness group. Engagement in social activities (i.e., religious, friendship, leisure, and volunteer activity) was evaluated through a questionnaire. Multiple logistic regression analysis was performed to evaluate the relation between social activity and awareness of warning symptoms. Results: Overall, 52.6% participants were aware of the warning symptoms of stroke, and 45.8% of MI. Regular engagement in at least one social activity, particularly friendship or volunteer activity, was associated with better awareness of the warning symptoms, both stroke (OR: 1.21, 95% CI: 1.20-1.23) and MI (OR: 1.22, 95% CI: 1.20-1.24). Additionally, more diverse types of social activities were associated with higher levels of awareness. Relationship between social activity and awareness showed positive association with participants older than 60 years, rural residents, or with low socioeconomic status. Conclusion: Engagement in social activity was significantly associated with better knowledge about the warning symptoms of stroke and MI. For early hospital treatment after symptom onset, participation in social activities could be beneficial.
Subject(s)
Myocardial Infarction , Stroke , Humans , Cross-Sectional Studies , Health Knowledge, Attitudes, Practice , Awareness , Surveys and Questionnaires , Myocardial Infarction/prevention & control , Stroke/prevention & controlABSTRACT
The eutrophication of lakes and rivers without adequate rainfall leads to excessive growth of cyanobacterial harmful algal blooms (CyanoHABs) that produce toxicants, green tides, and unpleasant odors. The rapid growth of CyanoHABs owing to global warming, climate change, and the development of rainforests and dams without considering the environmental concern towards lakes and rivers is a serious issue. Humans and livestock consuming the toxicant-contaminated water that originated from CyanoHABs suffer severe health problems. Among the various toxicants produced by CyanoHABs, microcystins (MCs) are the most harmful. Excess accumulation of MC within living organisms can result in liver failure and hepatocirrhosis, eventually leading to death. Therefore, it is essential to precisely detect MCs in water samples. To date, the liquid chromatography-mass spectrometry (LC-MS) and enzyme-linked immunosorbent assay (ELISA) have been the standard methods for the detection of MC and provide precise results with high reliability. However, these methods require heavy instruments and complicated operation steps that could hamper the portability and field-readiness of the detection system. Therefore, in order for this goal to be achieved, the biosensor has been attracted to a powerful alternative for MC detection. Thus far, several types of MC biosensor have been proposed to detect MC in freshwater sample. The introduction of material is a useful option in order to improve the biosensor performance and construct new types of biosensors. Introducing nanomaterials to the biosensor interface provides new phenomena or enhances the sensitivity. In recent times, different types of nanomaterials, such as metallic, carbon-based, and transition metal dichalcogenide-based nanomaterials, have been developed and used to fabricate biosensors for MC detection. This study reviews the recent advancements in different nanomaterial-based MC biosensors.
Subject(s)
Biosensing Techniques , Cyanobacteria , Harmful Algal Bloom , Humans , Microcystins/chemistry , Nanostructures/chemistry , Reproducibility of Results , WaterABSTRACT
Streptomyces species have attracted considerable interest as a reservoir of medically important secondary metabolites, which are even diverse and different between strains. Here, we reassess ten Streptomyces venezuelae strains by presenting the highly resolved classification, using 16S rRNA sequencing, MALDI-TOF MS protein profiling, and whole-genome sequencing. The results revealed that seven of the ten strains were misclassified as S. venezuelae species. Secondary metabolite biosynthetic gene cluster (smBGC) mining and targeted LC-MS/MS based metabolite screening of S. venezuelae and misclassified strains identified in total 59 secondary metabolites production. In addition, a comparison of pyrrolamide-type antibiotic BGCs of four misclassified strains, followed by functional genomics, revealed that athv28 is critical in the synthesis of the anthelvencin precursor, 5-amino-3,4-dihydro-2H-pyrrole-2-carboxylate (ADPC). Our findings illustrate the importance of the accurate classification and better utilization of misclassified Streptomyces strains to discover smBGCs and their secondary metabolite products.
ABSTRACT
Demands on nontoxic nanomaterials in the short-wavelength infrared (SWIR) have rapidly grown over the past decade. Here, we present the nonstoichiometric silver chalcogenide nanocrystals of AgxTe (x > 2) and Ag2Te/Ag2S CQDs with a tunable bandgap across the SWIR region. When the atomic percent of the metal and chalcogenide elements are varied, the emission frequency of the excitonic peak is successfully extended to 2.7 µm. Surprisingly, the AgxTe CQD film responds to the SWIR light with a responsivity of 2.1 A/W at 78 K. Also, the Ag2S shell growth over the Ag2Te core enhances not only the emission intensity but also the structural rigidity, preventing crystal morphology deformation under the electron beam. The origin of the enhancement in the emission intensity and air stability of AgxTe and Ag2Te/Ag2S CQDs is carefully investigated by X-ray photoelectron spectroscopy (XPS). The optical properties and infrared photocurrent of AgxTe CQDs will provide new opportunities for solution-based SWIR applications.
ABSTRACT
C-reactive protein (CRP) is an acute-phase reactive protein that appears in the bloodstream in response to inflammatory cytokines such as interleukin-6 produced by adipocytes and macrophages during the acute phase of the inflammatory/infectious process. CRP measurement is widely used as a representative acute and chronic inflammatory disease marker. With the development of diagnostic techniques measuring CRP more precisely than before, CRP is being used not only as a traditional biomarker but also as a biomarker for various diseases. The existing commercialized CRP assays are dominated by enzyme-linked immunosorbent assay (ELISA). ELISA has high selectivity and sensitivity, but its limitations include requiring complex analytic processes, long analysis times, and professional manpower. To overcome these problems, nanobiotechnology is able to provide alternative diagnostic tools. By introducing the nanobio hybrid material to the CRP biosensors, CRP can be measured more quickly and accurately, and highly sensitive biosensors can be used as portable devices. In this review, we discuss the recent advancements in electrochemical, electricity, and spectroscopy-based CRP biosensors composed of biomaterial and nanomaterial hybrids.
Subject(s)
Biosensing Techniques , C-Reactive Protein , Biomarkers , Electricity , Electrochemical TechniquesABSTRACT
Intraband transitions of colloidal semiconductor nanocrystals, or the electronic transitions occurring in either the conduction band or valence band, have recently received considerable attention because utilizing the intraband transitions provides new approaches for applications such as photodetectors, imaging, solar cells, lasers, and so on. In the past few years, it has been revealed that observing the intraband transition is not limited for temporal measurement such as ultrafast spectroscopy but available for steady-state measurement even under ambient conditions with the help of self-doped semiconductor nanocrystals. Considering the large absorption coefficient of the steady-state intraband transition comparable to that of the bandgap transition, the use of the intraband transition will be promising for both fundamental and application studies. Here, we summarize the recent progress in studies on intraband photoluminescence of self-doped semiconductor nanocrystals and discuss key questions to be addressed in future research.
ABSTRACT
Heterologous production of recombinant proteins is gaining increasing interest in biotechnology with respect to productivity, scalability, and wide applicability. The members of genus Streptomyces have been proposed as remarkable hosts for heterologous production due to their versatile nature of expressing various secondary metabolite biosynthetic gene clusters and secretory enzymes. However, there are several issues that limit their use, including low yield, difficulty in genetic manipulation, and their complex cellular features. In this review, we summarize rational engineering approaches to optimizing the heterologous production of secondary metabolites and recombinant proteins in Streptomyces species in terms of genetic tool development and chassis construction. Further perspectives on the development of optimal Streptomyces chassis by the design-build-test-learn cycle in systems are suggested, which may increase the availability of secondary metabolites and recombinant proteins.
ABSTRACT
Avian influenza virus (AIV) is one of the most harmful pathogens to living things due to its fast infection, various mutations, and dangerous symptoms. In this study, we fabricated a label-free AIV H5N1 biosensor composed of multi-functional DNA structure on a porous Au nanoparticles (pAuNPs) fabricated electrode using the electrochemical (EC) technique. As a multi-functional bioprobe, the DNA 3 way-junction (3WJ) was introduced. Each fragment of DNA 3WJ was rolled to recognition part (hemagglutinin (HA) protein detection aptamer), EC signal generation part (horseradish peroxidase (HRP)-mimicked DNAzyme), and immobilization part (Thiol group). Each fragment was assembled in order to form the DNA 3WJ for AI detection and the assembled structure was confirmed by native-tris boric acid magnesium polyacrylamide gel electrophoresis (TBM-PAGE). Moreover, in order to increase the electrochemical signal sensitivity, pAuNPs were synthesized. The property of pAuNPs was investigated by field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy (TEM), Ultraviolet-visible (UV-VIS) spectroscopy and zeta potential analysis. The DNA 3WJ on pAuNPs-modified Au electrode was then prepared using the layer-by-layer (LbL) assembly method. FE-SEM and atomic force microscopy (AFM) were used to investigate the surface morphology. Cyclic voltammetry (CV) was carried out to confirm the HA protein binding to DNA 3WJ-modified electrode. Moreover, The HA protein can be detected 1â¯pM in HEPES solution and 1 pM in diluted-chicken serum, respectively. The present study showed label-free, simple fabrication, and easy-to-tailor detection elements for AIV. The present biosensor can be a powerful candidate for various virus detection platforms.
Subject(s)
Biosensing Techniques/methods , Chickens/blood , Chickens/virology , DNA/chemistry , Electrochemical Techniques/methods , Gold/chemistry , Influenza A Virus, H5N1 Subtype/physiology , Metal Nanoparticles/chemistry , Animals , Metal Nanoparticles/ultrastructure , Oxidation-Reduction , Porosity , Surface PropertiesABSTRACT
Since the beginning of the 2000s, globalization has accelerated because of the development of transportation systems that allow for human and material exchanges throughout the world. However, this globalization has brought with it the rise of various pathogenic viral agents, such as Middle East respiratory syndrome coronavirus (MERS-CoV), severe acute respiratory syndrome coronavirus (SARS-CoV), Zika virus, and Dengue virus. In particular, avian influenza virus (AIV) is highly infectious and causes economic, health, ethnical, and social problems to human beings, which has necessitated the development of an ultrasensitive and selective rapid-detection system of AIV. To prevent the damage associated with the spread of AIV, early detection and adequate treatment of AIV is key. There are traditional techniques that have been used to detect AIV in chickens, ducks, humans, and other living organisms. However, the development of a technique that allows for the more rapid diagnosis of AIV is still necessary. To achieve this goal, the present article reviews the use of an AIV biosensor employing nanobio hybrid materials to enhance the sensitivity and selectivity of the technique while also reducing the detection time and high-throughput process time. This review mainly focused on four techniques: the electrochemical detection system, electrical detection method, optical detection methods based on localized surface plasmon resonance, and fluorescence.