The domain structure of centromeres is conserved from fission yeast to humans.

The centromeric DNA of fission yeast is arranged with a central core flanked by repeated sequences. The centromere-associated proteins, Mis6p and Cnp1p (SpCENP-A), associate exclusively with central core DNA, whereas the Swi6 protein binds the surrounding repeats. Here, electron microscopy and immunofluorescence light microscopy reveal that the central core and flanking regions occupy distinct positions within a heterochromatic domain. An "anchor" structure containing the Ndc80 protein resides between this heterochromatic domain and the spindle pole body. The organization of centromere-associated proteins in fission yeast is reminiscent of the multilayered structures of human kinetochores, indicating that such domain structure is conserved in eukaryotes.

Islet cell surface antibodies (ICSA) do bind to human pancreas: computerised, quantitative determination of ICSA using both pre- and postembedding immunocolloidal techniques.

Islet cell surface antibodies (ICSA) have been demonstrated significantly more often in serum of patients with IDDM and their relatives than in healthy controls, but some investigators have been unable to show binding to human islets. It has therefore been suggested that ICSA is an artefact. We have localised and quantified ICSA binding to different specimens, including human pancreas. ICSA-positive and ICSA-negative patients' serum, determined by a RIA-method, were incubated with ultrathin sections of rat insulinoma (RIN5AH) cells, stained with Goat-anti-human IgG conjugated with 10 nm gold particles. Sections were viewed in transmission electron microscopy (Mag. 30,000 x) and image analyses was used to calculate immunolabelling. To test cell specificity we used (RIN5AH-cells, rat tumour cells producing growth hormone (GH3), normal human pancreas, human insulinoma, and mice liver). Sections showed good morphology. ICSA-positive sera, with or without islet cell antibodies (ICA) gave always higher immunocolloidal labelling then ICSA-negative sera on RIN5AH sections. Thus, the colloidal gold technique could confirm the ICSA results determined with RIA. Immunolabelling was pronounced on normal human pancreas and human insulinoma cells, but none was found on GH3-cells or mice liver cells. ICSA is not an artefact but do exist and bind to human islet cells and therefore maybe can be used as a marker for IDDM immunity.

Fat cylinder transplantation: an experimental comparative study of three different kinds of fat transplants.

In an experimental comparative study, fat cylinders harvested with a new instrument were compared with excised fat and aspirated fat. In 12 New Zealand White rabbits, fat grafts of about 1 ml were transplanted from the fat pad between the shoulders to the scalp and rear side of the ears by three different fat harvesting techniques. After 6 months, the change in the weight of each of the 36 specimens was measured. All specimens were freeze-cut after fixation and stained with Sudan IV, a fat-specific stain. They were examined under a light microscope and evaluated by computer-assisted image analysis. There was no statistical difference in the percentage change in weight between the excised fat and the fat cylinder groups (2 and 1 percent, respectively). For aspirated fat, however, the difference was significant (-59 percent). There also were significantly more surviving mature adipocytes in the fat cylinder group than in the aspirated fat group. We conclude that fat cylinders harvested with the new instrument are as good grafting material as excised fat, while aspirated fat in this study was clearly inferior for grafting.

Resin embedding for quantitative immunoelectron microscopy. A comparative computerized image analysis.

Quantitative immunoelectron microscopy (QIEM) is dependent on the reliability of preparative techniques for both efficient immunolabeling and consistent quantitative results among series of immunostained sections. The present study compared Lowicryl K4M and Epon embedding after identical fixation and dehydration of rat somatotrophic secretory granules. Labeling intensity, diameter, roundness, uptake of uranyl acetate, and gray value were measured with computer assisted image analysis. Lowicryl-embedded granules showed the highest labeling densities after conventional fixation and Progressively Lowering Temperature (PLT) dehydration, but values were not consistent in a series of immunostained sections. A lower but more uniform level of immunostaining was seen in Epon-embedded sections when tissue was cryofixed and physically dehydrated. Gray value measurements from micrographs from both embedding media confirmed the better contrast of Epon sections and the different reliefs of the granule surfaces. This study emphasizes the importance of complete comparisons of preparative techniques for QIEM for reliability and reproducibility.

Cryofixation combined with physical dehydration for quantitative immunoelectron cytochemistry.

Common methods for preparing samples for immunoelectron microscopy involve glutaraldehyde fixation (GA) followed by chemical dehydration (CD) or cryofixation (CF) succeeded by physical dehydration, i.e., freeze drying (FD) or freeze substitution (FS). The effects of these techniques have been evaluated with regard to the sizes of epoxy resin embedded rat somatotrophic secretory granules as well as the immunolabeling densities over these granules. The measurements were performed by computerized image analysis using electron microscopy in transmission (TEM) and scanning transmission (STEM) modes, which allowed us to define the immunolabeling in detail. The embedded secretory granules showed the same diameters after GA (2 hr) with CD and GA (15 min) with CF and FS, but were smaller after CF-FS, and smallest after GA (15 min) with CF and FD. The highest labeling density appeared after GA (15 min) and physical dehydration, in particular after freeze substitution. Based on our STEM pictures a new factor for evaluating and interpreting immunolabeling of granules is introduced; the "accessible immunogold labeling surface." It defines the fraction of the epoxy resin surface that is labeled and varies with the preparation methods. By using this factor, an order of labeling densities/micron 2 over the accessible areas could be established for the different techniques: GA-CF-FS > CF-FS > GA-CF-FD > GA-CD. The high labeling after GA-CF-FS may be due to the combination of a large accessible area and accurate preservation of the antigenicity of the hormones in the granules.

Short fixation-shock freezing and freeze-drying versus chemical fixation and dehydration: computer assisted image analysis of morphological variables and immunogold labeling density on pituitary secretory granules.

We have performed a computer assisted image analysis evaluation of the effects of two preparation protocols on morphological variables and immunolabeling density of secretory granules using rat adenohypophysis as a model. Glutaraldehyde (GA) fixation for 2 hr and chemical dehydration was compared with short GA fixation (15 min) followed by cryofixation and freeze-drying (CF-FD). The 2 hr GA fixed specimens showed spherical nuclei and secretory granules regardless of their size, contrasting with the more irregularly shaped nuclei and secretory granules after short GA-CF-FD. In the latter group of specimens a correlation could be found between smaller nuclear areas and more irregular shapes. The differences in morphological variables between the two preparation protocols might be due to a better protein stabilization and a reduced collapse of macromolecules after the 2 hr GA fixation, strengthened by the chemical dehydration. The specific immunolabeling with antiserum to growth hormone was much greater but more varied after short time GA-CF-FD than after long GA fixation. Epon surface topography over the granule area also differed: smooth after short time GA-CF-FD and furrowed after long GA fixation. Our results, demonstrating important differences in morphological parameters and immunolabeling density between two common preparation protocols, seem critical for more reliable interpretation in quantitative immunoelectron microscopy. We also emphasize the need for computer assisted image analysis and measurements in immunoelectron microscopy to ensure objective evaluations.

Epon resin infiltration and immunogold labelling of pituitary secretory granules after cryofixation versus chemical fixation.

The degree of infiltration of epoxy resin into pituitary secretory granules was evaluated using X-ray microanalysis of the concentrations of chlorine in the epoxy resins. The effectiveness of infiltration was tested after three different tissue preparation techniques: cryofixation+freeze-drying (CF-FD), glutaraldehyde fixation (GF)+chemical dehydration, and no fixation--no dehydration. Signs of marked incomplete infiltration were found in embedded unfixed tissue while the other two techniques showed 80% infiltration. Uneven penetration was seen after CF-FD and GF. The plastic surface demonstrated a mountain-like appearance over the secretory granules after immunocytochemistry of the glutaraldehyde fixed tissue, whereas the CF-FD tissue showed a less furrowed surface. This probably is due to contact with water, which swells those parts of the granules that are unprotected by the plastic embedding medium. Our findings may explain why it is possible to perform immunocytochemistry on Epon embedded tissue.

Pituitary secretory granule topography: influence of different electron microscopic preparation procedures on the surface of Epon sections.

Human, rat and mouse pituitary tissues have been examined electron microscopically in transmission (TEM), scanning-transmission (STEM) and scanning (SEM) modes for the surface appearance of the secretory granules in tissue sections. Cryofixed and cryosectioned tissue showed only slightly protruding granule profiles which had a smooth surface. Cryofixed, freeze-dried and Epon embedded pituitaries, on the other hand, demonstrated swollen and furrowed surfaces over the granules after contact with water. This topography could also be seen after glutaraldehyde fixation but less after post-fixation in OsO4. The surface alterations in the sections of pituitary secretory granules are thought to be due to differences in the homogeneity of the resin infiltration, leaving resin-free openings where water can enter. It also seems probable that the Epon resin is more influenced by water than has been previously assumed, based on the findings of efficient elimination of osmium from the granules after incubation of tissue sections in water for only 10 min.

Quantitative ultrastructural immunocytochemistry using a computerized image analysis system.

Secretory granules in human pituitary adenoma cells have been examined indirectly for hormone epitopes by immunogold labelling of resin-embedded ultrathin sections. The specific binding of different immunoglobulin-gold complexes to the antigrowth hormone antibodies over the secretory granules was measured using a computerized image analysis system. This facilitated the assessment of the preferential binding to the target granules of gold particles with three different average particle diameters (Au7, Au11, Au17). The time of pretreatment of sections with H2O2 or a buffer was found to influence the staining considerably. The scanning electron microscopic findings of protruded secretory granules with a mountain-like surface might be relevant to the uneven distribution of immunolabels seen over the secretory granules in the adenohypophysis.

Reduced redox potential during growth of some gram-negative bacteria. Effect on the biochemical and physicochemical surface properties and phagocytosis by polymorphonuclear leukocytes.

When cultivated at reduced redox potential the physico-chemical surface properties were altered in strains of E. coli, Salmonella and Yersinia bacteria. In particular, strains which showed hydrophilic surface properties under normal aerobic cultivation became more hydrophobic when exposed to anaerobic conditions (e.g. E. coli K12, E. coli K12D21, E. coli K12D22, S. minnesota S99, S. typhimurium 395MS, S. braenderup 2828 and Yersinia enterocolitica). Moreover, there were qualitative as well as quantitative differences in the protein profiles of whole bacterial lysates and membrane preparations analysed in SDS-PAGE. There were no qualitative differences in the lipopolysaccharide (LPS) bands. However, when E. coli K12D22 were cultivated aerobically, remarkably more high molecular temperature-sensitive (70 degrees C for 45 min) carbohydrate material was produced (weight about 360 KD and 660 KD). Interaction between polymorphonuclear leukocytes (PMNL) and the E. coli K12D22 strain, measured as chemiluminescence, showed that the anaerobically cultivated bacteria induced a chemiluminescence that was mainly of intracellular origin, while the aerobically cultivated induced an extracellular response. Phagocytosis and killing-studies showed that only anaerobically-grown E. coli were effectively inactivated by the PMNL.