ABSTRACT
The treatment and diagnosis of colon cancer are considered to be social and economic challenges due to the high mortality rates. Every year, around the world, almost half a million people contract cancer, including colon cancer. Determining the grade of colon cancer mainly depends on analyzing the gland's structure by tissue region, which has led to the existence of various tests for screening that can be utilized to investigate polyp images and colorectal cancer. This article presents a comprehensive survey on the diagnosis of colon cancer. This covers many aspects related to colon cancer, such as its symptoms and grades as well as the available imaging modalities (particularly, histopathology images used for analysis) in addition to common diagnosis systems. Furthermore, the most widely used datasets and performance evaluation metrics are discussed. We provide a comprehensive review of the current studies on colon cancer, classified into deep-learning (DL) and machine-learning (ML) techniques, and we identify their main strengths and limitations. These techniques provide extensive support for identifying the early stages of cancer that lead to early treatment of the disease and produce a lower mortality rate compared with the rate produced after symptoms develop. In addition, these methods can help to prevent colorectal cancer from progressing through the removal of pre-malignant polyps, which can be achieved using screening tests to make the disease easier to diagnose. Finally, the existing challenges and future research directions that open the way for future work in this field are presented.
Subject(s)
Colonic Neoplasms , Colorectal Neoplasms , Deep Learning , Humans , Machine Learning , Colonic Neoplasms/diagnosisABSTRACT
Bacteriosis is one of the most prevalent and deadly infections that affect peach crops globally. Timely detection of Bacteriosis disease is essential for lowering pesticide use and preventing crop loss. It takes time and effort to distinguish and detect Bacteriosis or a short hole in a peach leaf. In this paper, we proposed a novel LightWeight (WLNet) Convolutional Neural Network (CNN) model based on Visual Geometry Group (VGG-19) for detecting and classifying images into Bacteriosis and healthy images. Profound knowledge of the proposed model is utilized to detect Bacteriosis in peach leaf images. First, a dataset is developed which consists of 10000 images: 4500 are Bacteriosis and 5500 are healthy images. Second, images are preprocessed using different steps to prepare them for the identification of Bacteriosis and healthy leaves. These preprocessing steps include image resizing, noise removal, image enhancement, background removal, and augmentation techniques, which enhance the performance of leaves classification and help to achieve a decent result. Finally, the proposed LWNet model is trained for leaf classification. The proposed model is compared with four different CNN models: LeNet, Alexnet, VGG-16, and the simple VGG-19 model. The proposed model obtains an accuracy of 99%, which is higher than LeNet, Alexnet, VGG-16, and the simple VGG-19 model. The achieved results indicate that the proposed model is more effective for the detection of Bacteriosis in peach leaf images, in comparison with the existing models.
ABSTRACT
Alzheimer's disease (AD) is a neurodegenerative ailment, which gradually deteriorates memory and weakens the cognitive functions and capacities of the body, such as recall and logic. To diagnose this disease, CT, MRI, PET, etc. are used. However, these methods are time-consuming and sometimes yield inaccurate results. Thus, deep learning models are utilized, which are less time-consuming and yield results with better accuracy, and could be used with ease. This article proposes a transfer learning-based modified inception model with pre-processing methods of normalization and data addition. The proposed model achieved an accuracy of 94.92 and a sensitivity of 94.94. It is concluded from the results that the proposed model performs better than other state-of-the-art models. For training purposes, a Kaggle dataset was used comprising 6,200 images, with 896 mild demented (M.D) images, 64 moderate demented (Mod.D) images, and 3,200 non-demented (N.D) images, and 1,966 veritably mild demented (V.M.D) images. These models could be employed for developing clinically useful results that are suitable to descry announcements in MRI images.
ABSTRACT
This paper discusses the equivalent circuit model and functional verification of an integrated antenna system as its main focus. The integrated antenna system consists of two independent antenna systems, namely the Cognitive Radio antenna and the Ultra Wide Band Multiple Iinput Multiple Output antenna. This article is split into two parts: The first part discusses the equivalent circuit of an integrated antenna system by optimizing the RLC values. The developed lumped equivalent circuit model produces the NB resonant frequencies, which is the same as the S-parameter obtained through EM simulation. The second part of this paper aims to discuss the experimental verification of an integrated CR antenna system with Bayesian learning-based spectrum sensing algorithms using Universal Software Radio Peripheral devices. Real-time sensing and communication functionalities are visualized in the LABVIEW monitor. The integrated antenna system is fabricated and measured after the simulation.
ABSTRACT
Reaching a flat network is the main target of future evolved packet core for the 5G mobile networks. The current 4th generation core network is centralized architecture, including Serving Gateway and Packet-data-network Gateway; both act as mobility and IP anchors. However, this architecture suffers from non-optimal routing and intolerable latency due to many control messages. To overcome these challenges, we propose a partially distributed architecture for 5th generation networks, such that the control plane and data plane are fully decoupled. The proposed architecture is based on including a node Multi-session Gateway to merge the mobility and IP anchor gateway functionality. This work presented a control entity with the full implementation of the control plane to achieve an optimal flat network architecture. The impact of the proposed evolved packet Core structure in attachment, data delivery, and mobility procedures is validated through simulation. Several experiments were carried out by using NS-3 simulation to validate the results of the proposed architecture. The Numerical analysis is evaluated in terms of total transmission delay, inter and intra handover delay, queuing delay, and total attachment time. Simulation results show that the proposed architecture performance-enhanced end-to-end latency over the legacy architecture.
Subject(s)
Computer Communication Networks , Wireless Technology , Computer Simulation , SoftwareABSTRACT
We propose a physical activity recognition and monitoring framework based on wearable sensors during maternity. A physical activity can either create or prevent health issues during a given stage of pregnancy depending on its intensity. Thus, it becomes very important to provide continuous feedback by recognizing a physical activity and its intensity. However, such continuous monitoring is very challenging during the whole period of maternity. In addition, maintaining a record of each physical activity, and the time for which it was performed, is also a non-trivial task. We aim at such problems by first recognizing a physical activity via the data of wearable sensors that are put on various parts of body. We avoid the use of smartphones for such task due to the inconvenience caused by wearing it for activities such as "eating". In our proposed framework, a module worn on body consists of three sensors: a 3-axis accelerometer, 3-axis gyroscope, and temperature sensor. The time-series data from these sensors are sent to a Raspberry-PI via Bluetooth Low Energy (BLE). Various statistical measures (features) of this data are then calculated and represented in features vectors. These feature vectors are then used to train a supervised machine learning algorithm called classifier for the recognition of physical activity from the sensors data. Based on such recognition, the proposed framework sends a message to the care-taker in case of unfavorable situation. We evaluated a number of well-known classifiers on various features developed from overlapped and non-overlapped window size of time-series data. Our novel dataset consists of 10 physical activities performed by 61 subjects at various stages of maternity. On the current dataset, we achieve the highest recognition rate of 89% which is encouraging for a monitoring and feedback system.
Subject(s)
Wearable Electronic Devices , Algorithms , Exercise , Female , Humans , Pregnancy , Recognition, Psychology , TimeABSTRACT
Autistic people face many challenges in various aspects of daily life such as social skills, repetitive behaviors, speech, and verbal communication. They feel hesitant to talk with others. The signs of autism vary from one individual to another, with a range from mild to severe. Autistic children use fewer communicative gestures compared with typically developing children (TD). With time, the parents may learn their gestures and understand what is occurring in their child's mind. However, it is difficult for other people to understand their gestures. In this paper, we propose a wearable-sensors-based platform to recognize autistic gestures using various classification techniques. The proposed system defines, monitors, and classifies the gestures of the individuals. We propose using wearable sensors that transmit their data using a Bluetooth interface to a data acquisition and classification server. A dataset of 24 gestures is created by 10 autistic children performing each gesture about 10 times. Time- and frequency-domain features are extracted from the sensors' data, which are classified using k-nearest neighbor (KNN), decision tree, neural network, and random forest models. The main objective of this work is to develop a wearable-sensor-based IoT platform for gesture recognition in children with autism spectrum disorder (ASD). We achieve an accuracy of about 91% with most of the classifiers using dataset cross-validation and leave-one-person-out cross-validation.
Subject(s)
Autism Spectrum Disorder , Wearable Electronic Devices , Algorithms , Autism Spectrum Disorder/diagnosis , Child , Gestures , Humans , Machine LearningABSTRACT
Alzheimer's disease (AD) is the most common type of dementia. Its diagnosis and progression detection have been intensively studied. Nevertheless, research studies often have little effect on clinical practice mainly due to the following reasons: (1) Most studies depend mainly on a single modality, especially neuroimaging; (2) diagnosis and progression detection are usually studied separately as two independent problems; and (3) current studies concentrate mainly on optimizing the performance of complex machine learning models, while disregarding their explainability. As a result, physicians struggle to interpret these models, and feel it is hard to trust them. In this paper, we carefully develop an accurate and interpretable AD diagnosis and progression detection model. This model provides physicians with accurate decisions along with a set of explanations for every decision. Specifically, the model integrates 11 modalities of 1048 subjects from the Alzheimer's Disease Neuroimaging Initiative (ADNI) real-world dataset: 294 cognitively normal, 254 stable mild cognitive impairment (MCI), 232 progressive MCI, and 268 AD. It is actually a two-layer model with random forest (RF) as classifier algorithm. In the first layer, the model carries out a multi-class classification for the early diagnosis of AD patients. In the second layer, the model applies binary classification to detect possible MCI-to-AD progression within three years from a baseline diagnosis. The performance of the model is optimized with key markers selected from a large set of biological and clinical measures. Regarding explainability, we provide, for each layer, global and instance-based explanations of the RF classifier by using the SHapley Additive exPlanations (SHAP) feature attribution framework. In addition, we implement 22 explainers based on decision trees and fuzzy rule-based systems to provide complementary justifications for every RF decision in each layer. Furthermore, these explanations are represented in natural language form to help physicians understand the predictions. The designed model achieves a cross-validation accuracy of 93.95% and an F1-score of 93.94% in the first layer, while it achieves a cross-validation accuracy of 87.08% and an F1-Score of 87.09% in the second layer. The resulting system is not only accurate, but also trustworthy, accountable, and medically applicable, thanks to the provided explanations which are broadly consistent with each other and with the AD medical literature. The proposed system can help to enhance the clinical understanding of AD diagnosis and progression processes by providing detailed insights into the effect of different modalities on the disease risk.
Subject(s)
Alzheimer Disease/diagnostic imaging , Artificial Intelligence , Brain/diagnostic imaging , Databases, Factual , Magnetic Resonance Imaging , Models, Neurological , Neuroimaging , Aged , Aged, 80 and over , Female , Follow-Up Studies , Humans , Male , Middle AgedABSTRACT
Accurate detection of traffic accidents as well as condition analysis are essential to effectively restoring traffic flow and reducing serious injuries and fatalities. This goal can be obtained using an advanced data classification model with a rich source of traffic information. Several systems based on sensors and social networking platforms have been presented recently to detect traffic events and monitor traffic conditions. However, sensor-based systems provide limited information, and may fail owing to the long detection times and high false-alarm rates. In addition, social networking data are unstructured, unpredictable, and contain idioms, jargon, and dynamic topics. The machine learning algorithms utilized for traffic event detection might not extract valuable information from social networking data. In this paper, a social network-based, real-time monitoring framework is proposed for traffic accident detection and condition analysis using ontology and latent Dirichlet allocation (OLDA) and bidirectional long short-term memory (Bi-LSTM). First, the query-based search engine effectively collects traffic information from social networks, and the data preprocessing module transforms it into structured form. Second, the proposed OLDA-based topic modeling method automatically labels each sentence (e.g., traffic or non-traffic) to identify the exact traffic information. In addition, the ontology-based event recognition approach detects traffic events from traffic-related data. Next, the sentiment analysis technique identifies the polarity of traffic events employing user's opinions, which helps determine accurate conditions of traffic events. Finally, the FastText model and Bi-LSTM with softmax regression are trained for traffic event detection and condition analysis. The proposed framework is evaluated using traffic-related data, comparing OLDA and Bi-LSTM with existing topic modeling methods and traditional classifiers using word embedding models, respectively. Our system outperforms state-of-the-art methods and achieves accuracy of 97 %. This finding demonstrates that the proposed system is more efficient for traffic event detection and condition analysis, in comparison to other existing systems.
Subject(s)
Accidents, Traffic , Neural Networks, Computer , Algorithms , Humans , Machine Learning , Social NetworkingABSTRACT
BACKGROUND AND OBJECTIVES: Kinship verification and recognition (KVR) is the machine's ability to identify the genetic and blood relationship and its degree between humans' facial images. The face is used because it is one of the most significant ways to recognize each other. Automatic KVR is an interesting area for investigation. It greatly affects real-world applications, such as searching for lost family members, forensics, and historical and genealogical studies. This paper presents a comprehensive survey that describes KVR applications and kinship types. It presents a literature review of current studies starting from handcrafted passing through shallow metric learning and ending with deep learning feature-based techniques. Furthermore, kinship mostly used datasets are discussed that in turn open the way for future directions for the research in this field. Also, the KVR limitations are discussed, such as insufficient illumination, noise, occlusion, and age variations problems. Finally, future research directions are presented, such as age and gender variation problems. METHODS: We applied a literature survey methodology to retrieve data from academic databases. An inclusion and exclusion criteria were set. Three stages were followed to select articles. Finally, the main KVR stages, along with the main methods in each stage, were presented. We believe that surveys can help researchers easily to detect areas that require more development and investigation. RESULTS: It was found that handcrafted, metric learning, and deep learning were widely utilized in kinship verification and recognition problem using facial images. CONCLUSIONS: Despite the scientific efforts that aim to address this hot research topic, many future research areas require investigation, such as age and gender variation. In the end, the presented survey makes it easier for researchers to identify the new areas that require more investigation and research.
ABSTRACT
The Android operating system has gained popularity and evolved rapidly since the previous decade. Traditional approaches such as static and dynamic malware identification techniques require a lot of human intervention and resources to design the malware classification model. The real challenge lies with the fact that inspecting all files of the application structure leads to high processing time, more storage, and manual effort. To solve these problems, optimization algorithms and deep learning has been recently tested for mitigating malware attacks. This manuscript proposes Summing of neurAl aRchitecture and VisualizatiOn Technology for Android Malware identification (SARVOTAM). The system converts the malware non-intuitive features into fingerprint images to extract the quality information. A fine-tuned Convolutional Neural Network (CNN) is used to automatically extract rich features from visualized malware thus eliminating the feature engineering and domain expert cost. The experiments were done using the DREBIN dataset. A total of fifteen different combinations of the Android malware image sections were used to identify and classify Android malware. The softmax layer of CNN was substituted with machine learning algorithms like K-Nearest Neighbor (KNN), Support Vector Machine (SVM), and Random Forest (RF) to analyze the grayscale malware images. It observed that CNN-SVM model outperformed original CNN as well as CNN-KNN, and CNN-RF. The classification results showed that our method is able to achieve an accuracy of 92.59% using Android certificates and manifest malware images. This paper reveals the lightweight solution and much precise option for malware identification.
ABSTRACT
The adaptability of heart to external and internal stimuli is reflected by the heart rate variability (HRV). Reduced HRV can be a predictor of negative cardiovascular outcomes. Based on the nonlinear, nonstationary, and highly complex dynamics of the controlling mechanism of the cardiovascular system, linear HRV measures have limited capability to accurately analyze the underlying dynamics. In this study, we propose an automated system to analyze HRV signals by extracting multimodal features to capture temporal, spectral, and complex dynamics. Robust machine learning techniques, such as support vector machine (SVM) with its kernel (linear, Gaussian, radial base function, and polynomial), decision tree (DT), k-nearest neighbor (KNN), and ensemble classifiers, were employed to evaluate the detection performance. Performance was evaluated in terms of specificity, sensitivity, positive predictive value (PPV), negative predictive value (NPV), and area under the receiver operating characteristic curve (AUC). The highest performance was obtained using SVM linear kernel (TA = 93.1%, AUC = 0.97, 95% CI [lower bound = 0.04, upper bound = 0.89]), followed by ensemble subspace discriminant (TA = 91.4%, AUC = 0.96, 95% CI [lower bound 0.07, upper bound = 0.81]) and SVM medium Gaussian kernel (TA = 90.5%, AUC = 0.95, 95% CI [lower bound = 0.07, upper bound = 0.86]). The results reveal that the proposed approach can provide an effective and computationally efficient tool for automatic detection of congestive heart failure patients.
Subject(s)
Heart Failure/diagnosis , Machine Learning , Support Vector Machine , Algorithms , Heart Rate , Humans , Models, Statistical , ROC Curve , Sensitivity and SpecificityABSTRACT
In post-disaster scenarios, such as after floods, earthquakes, and in war zones, the cellular communication infrastructure may be destroyed or seriously disrupted. In such emergency scenarios, it becomes very important for first aid responders to communicate with other rescue teams in order to provide feedback to both the central office and the disaster survivors. To address this issue, rapidly deployable systems are required to re-establish connectivity and assist users and first responders in the region of incident. In this work, we describe the design, implementation, and evaluation of a rapidly deployable system for first response applications in post-disaster situations, named RDSP. The proposed system helps early rescue responders and victims by sharing their location information to remotely located servers by utilizing a novel routing scheme. This novel routing scheme consists of the Dynamic ID Assignment (DIA) algorithm and the Minimum Maximum Neighbor (MMN) algorithm. The DIA algorithm is used by relay devices to dynamically select their IDs on the basis of all the available IDs of networks. Whereas, the MMN algorithm is used by the client and relay devices to dynamically select their next neighbor relays for the transmission of messages. The RDSP contains three devices; the client device sends the victim's location information to the server, the relay device relays information between client and server device, the server device receives messages from the client device to alert the rescue team. We deployed and evaluated our system in the outdoor environment of the university campus. The experimental results show that the RDSP system reduces the message delivery delay and improves the message delivery ratio with lower communication overhead.
Subject(s)
Computer Communication Networks , Disasters , Rescue Work , Wireless Technology , Algorithms , Emergency Medical Services , HumansABSTRACT
Prominin 1 (PROM1) is considered a biomarker for cancer stem cells, although its biological role is unclear. Prominin 2 (PROM2) has also been associated with certain cancers. However, the prognostic value of PROM1 and PROM2 in cancer is controversial. Here, we performed a systematic data analysis to examine whether prominins can function as prognostic markers in human cancers. The expression of prominins was assessed and their prognostic value in human cancers was determined using univariate and multivariate survival analyses, via various online platforms. We selected a group of prominent functional protein partners of prominins by protein-protein interaction analysis. Subsequently, we investigated the relationship between mutations and copy number alterations in prominin genes and various types of cancers. Furthermore, we identified genes that correlated with PROM1 and PROM2 in certain cancers, based on their levels of expression. Gene ontology and pathway analyses were performed to assess the effect of these correlated genes on various cancers. We observed that PROM1 was frequently overexpressed in esophageal, liver, and ovarian cancers and its expression was negatively associated with prognosis, whereas PROM2 overexpression was associated with poor overall survival in lung and ovarian cancers. Based on the varying characteristics of prominins, we conclude that PROM1 and PROM2 expression differentially modulates the clinical outcomes of cancers.
Subject(s)
AC133 Antigen/genetics , Gene Expression Regulation, Neoplastic , Membrane Glycoproteins/genetics , Neoplasms/genetics , DNA Mutational Analysis , Datasets as Topic , Gene Expression Profiling , Humans , Mutation , Neoplasms/mortality , Neoplasms/pathology , Prognosis , Protein Interaction Mapping , Protein Interaction Maps/genetics , Survival AnalysisABSTRACT
Static sink-based wireless sensor networks (WSNs) suffer from an energy-hole problem. This incurs as the rate of energy consumption on sensor nodes around sinks and on critical paths is considerably faster. State-of-the-art en-routing filtering schemes save energy by countering false report injection attacks. In addition to their unique limitations, these schemes generally do not examine energy awareness in underlying routing. Mostly, these security methods are based on a fixed filtering capacity, unable to respond to changes in attack intensity. Therefore, these limitations cause network partition(s), exhibiting adverse effects on network lifetime. Extending network lifetime while preserving energy and security thus becomes an interesting challenge. In this article, we address the aforesaid shortcomings with the proposed adaptive en-route filtering (AEF) scheme. In energy-aware routing, the fitness function, which is used to select forwarding nodes, considers residual energy and other factors as opposed to distance only. In pre-deterministic key distribution, keys are distributed based on the consideration of having paths with a different number of verification nodes. This, consequently, permits us to have multiple paths with different security levels that can be exploited to counter different attack intensities. Taken together, the integration of the special fitness function with the new key distribution approach enables the AEF to adapt the underlying dynamic network conditions. The simulation experiments under different settings show significant improvements in network lifetime.
ABSTRACT
BACKGROUND: Mobile health (MH) technologies including clinical decision support systems (CDSS) provide an efficient method for patient monitoring and treatment. A mobile CDSS is based on real-time sensor data and historical electronic health record (EHR) data. Raw sensor data have no semantics of their own; therefore, a computer system cannot interpret these data automatically. In addition, the interoperability of sensor data and EHR medical data is a challenge. EHR data collected from distributed systems have different structures, semantics, and coding mechanisms. As a result, building a transparent CDSS that can work as a portable plug-and-play component in any existing EHR ecosystem requires a careful design process. Ontology and medical standards support the construction of semantically intelligent CDSSs. METHODS: This paper proposes a comprehensive MH framework with an integrated CDSS capability. This cloud-based system monitors and manages type 1 diabetes mellitus. The efficiency of any CDSS depends mainly on the quality of its knowledge and its semantic interoperability with different data sources. To this end, this paper concentrates on constructing a semantic CDSS based on proposed FASTO ontology. RESULTS: This realistic ontology is able to collect, formalize, integrate, analyze, and manipulate all types of patient data. It provides patients with complete, personalized, and medically intuitive care plans, including insulin regimens, diets, exercises, and education sub-plans. These plans are based on the complete patient profile. In addition, the proposed CDSS provides real-time patient monitoring based on vital signs collected from patients' wireless body area networks. These monitoring include real-time insulin adjustments, mealtime carbohydrate calculations, and exercise recommendations. FASTO integrates the well-known standards of HL7 fast healthcare interoperability resources (FHIR), semantic sensor network (SSN) ontology, basic formal ontology (BFO) 2.0, and clinical practice guidelines. The current version of FASTO includes 9577 classes, 658 object properties, 164 data properties, 460 individuals, and 140 SWRL rules. FASTO is publicly available through the National Center for Biomedical Ontology BioPortal at https://bioportal.bioontology.org/ontologies/FASTO . CONCLUSIONS: The resulting CDSS system can help physicians to monitor more patients efficiently and accurately. In addition, patients in rural areas can depend on the system to manage their diabetes and emergencies.
Subject(s)
Biological Ontologies , Decision Support Systems, Clinical , Telemedicine , Computer Communication Networks , Electronic Health Records , Humans , Information Storage and Retrieval , SemanticsABSTRACT
In this paper, we study the offloading decision of collaborative task execution between platoon and Mobile Edge Computing (MEC) server. The mobile application is represented by a series of fine-grained tasks that form a linear topology, each of which is either executed on a local vehicle, offloaded to other members of the platoon, or offloaded to a MEC server. The objective of the design is to minimize the cost of tasks offloading and meets the deadline of tasks execution. The cost minimized task decision problem is transformed into the shortest path problem, which is limited by the deadline of the tasks on a directed acyclic graph. The classical Lagrangian Relaxation-based Aggregated Cost (LARAC) algorithm is adopted to solve the problem approximately. Numerical analysis shows that the scheduling method of the tasks decision can be well applied to the platoon scenario and execute the tasks in cooperation with the MEC server. In addition, compared with task local execution, platoon execution and MEC server execution, the optimal offloading decision for collaborative task execution can significantly reduce the cost of task execution and meet deadlines.
ABSTRACT
BACKGROUND: Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT, hereafter abbreviated SCT) is a comprehensive medical terminology used for standardizing the storage, retrieval, and exchange of electronic health data. Some efforts have been made to capture the contents of SCT as Web Ontology Language (OWL), but these efforts have been hampered by the size and complexity of SCT. METHOD: Our proposal here is to develop an upper-level ontology and to use it as the basis for defining the terms in SCT in a way that will support quality assurance of SCT, for example, by allowing consistency checks of definitions and the identification and elimination of redundancies in the SCT vocabulary. Our proposed upper-level SCT ontology (SCTO) is based on the Ontology for General Medical Science (OGMS). RESULTS: The SCTO is implemented in OWL 2, to support automatic inference and consistency checking. The approach will allow integration of SCT data with data annotated using Open Biomedical Ontologies (OBO) Foundry ontologies, since the use of OGMS will ensure consistency with the Basic Formal Ontology, which is the top-level ontology of the OBO Foundry. Currently, the SCTO contains 304 classes, 28 properties, 2400 axioms, and 1555 annotations. It is publicly available through the bioportal at http://bioportal.bioontology.org/ontologies/SCTO/ . CONCLUSION: The resulting ontology can enhance the semantics of clinical decision support systems and semantic interoperability among distributed electronic health records. In addition, the populated ontology can be used for the automation of mobile health applications.
Subject(s)
Biological Ontologies , Biomedical Research , Decision Support Systems, Clinical , Electronic Health Records , Systematized Nomenclature of Medicine , HumansABSTRACT
BACKGROUND: Treatment of type 2 diabetes mellitus (T2DM) is a complex problem. A clinical decision support system (CDSS) based on massive and distributed electronic health record data can facilitate the automation of this process and enhance its accuracy. The most important component of any CDSS is its knowledge base. This knowledge base can be formulated using ontologies. The formal description logic of ontology supports the inference of hidden knowledge. Building a complete, coherent, consistent, interoperable, and sharable ontology is a challenge. RESULTS: This paper introduces the first version of the newly constructed Diabetes Mellitus Treatment Ontology (DMTO) as a basis for shared-semantics, domain-specific, standard, machine-readable, and interoperable knowledge relevant to T2DM treatment. It is a comprehensive ontology and provides the highest coverage and the most complete picture of coded knowledge about T2DM patients' current conditions, previous profiles, and T2DM-related aspects, including complications, symptoms, lab tests, interactions, treatment plan (TP) frameworks, and glucose-related diseases and medications. It adheres to the design principles recommended by the Open Biomedical Ontologies Foundry and is based on ontological realism that follows the principles of the Basic Formal Ontology and the Ontology for General Medical Science. DMTO is implemented under Protégé 5.0 in Web Ontology Language (OWL) 2 format and is publicly available through the National Center for Biomedical Ontology's BioPortal at http://bioportal.bioontology.org/ontologies/DMTO . The current version of DMTO includes more than 10,700 classes, 277 relations, 39,425 annotations, 214 semantic rules, and 62,974 axioms. We provide proof of concept for this approach to modeling TPs. CONCLUSION: The ontology is able to collect and analyze most features of T2DM as well as customize chronic TPs with the most appropriate drugs, foods, and physical exercises. DMTO is ready to be used as a knowledge base for semantically intelligent and distributed CDSS systems.
Subject(s)
Biological Ontologies , Diabetes Mellitus, Type 2/therapy , Internet , SemanticsABSTRACT
Molecular communication in nanonetworks is an emerging communication paradigm that uses molecules as information carriers. In molecule shift keying (MoSK), where different types of molecules are used for encoding, transmitter and receiver complexities increase as the modulation order increases. We propose a modulation technique called depleted MoSK (D-MoSK) in which, molecules are released if the information bit is 1 and no molecule is released for 0. The proposed scheme enjoys reduced number of the types of molecules for encoding. Numerical results show that the achievable rate is considerably higher and symbol error rate (SER) performance is better in the proposed technique.