INTERNATIONAL STANDARDS ON FOOD AND ENVIRONMENTAL RADIOACTIVITY MEASUREMENT FOR RADIOLOGICAL PROTECTION: STATUS AND PERSPECTIVES.

Radiological protection is a matter of concern for members of the public and thus national authorities are more likely to trust the quality of radioactivity data provided by accredited laboratories using common standards. Normative approach based on international standards aims to ensure the accuracy or validity of the test result through calibrations and measurements traceable to the International System of Units. This approach guarantees that radioactivity test results on the same types of samples are comparable over time and space as well as between different testing laboratories. Today, testing laboratories involved in radioactivity measurement have a set of more than 150 international standards to help them perform their work. Most of them are published by the International Standardization Organization (ISO) and the International Electrotechnical Commission (IEC). This paper reviews the most essential ISO standards that give guidance to testing laboratories at different stages from sampling planning to the transmission of the test report to their customers, summarizes recent activities and achievements and present the perspectives on new standards under development by the ISO Working Groups dealing with radioactivity measurement in connection with radiological protection.

Prevention of Staphylococcus aureus biomaterial-associated infections using a polymer-lipid coating containing the antimicrobial peptide OP-145.

The scarcity of current antibiotic-based strategies to prevent biomaterial-associated infections (BAI) and their risk of resistance development prompted us to develop a novel antimicrobial implant-coating to prevent Staphylococcus aureus-induced BAI. We incorporated the antimicrobial peptide OP-145 into a Polymer-Lipid Encapsulation MatriX (PLEX)-coating to obtain high peptide levels for prolonged periods at the implant-tissue interphase. We first confirmed that OP-145 was highly effective in killing S. aureus and inhibiting biofilm formation in vitro. OP-145 injected along S. aureus-inoculated implants in mice significantly reduced the number of culture-positive implants. OP-145 was released from the PLEX coating in a controlled zero-order kinetic rate after an initial 55%-burst release and displayed bactericidal activity in vitro. In a rabbit intramedullary nail-related infection model, 67% of rabbits with PLEX-OP-145-coated nails had culture-negative nails after 28days compared to 29% of rabbits with uncoated nails. In rabbits with PLEX-OP-145-coated nails, bone and soft tissue samples were culture-negative in 67% and 80%, respectively, whereas all bone samples and 71% of the soft tissue samples of rabbits with uncoated nails were infected. Together, PLEX-OP-145 coatings, of which both compounds have already been found safe in man, can prevent implant colonization and S. aureus-induced BAIs.

ISO standards on test methods for water radioactivity monitoring.

Water is vital to humans and each of us needs at least 1.5L of safe water a day to drink. Beginning as long ago as 1958 the World Health Organization (WHO) has published guidelines to help ensure water is safe to drink. Focused from the start on monitoring radionuclides in water, and continually cooperating with WHO, the International Standardization Organization (ISO) has been publishing standards on radioactivity test methods since 1978. As reliable, comparable and 'fit for purpose' results are an essential requirement for any public health decision based on radioactivity measurements, international standards of tested and validated radionuclide test methods are an important tool for production of such measurements. This paper presents the ISO standards already published that could be used as normative references by testing laboratories in charge of radioactivity monitoring of drinking water as well as those currently under drafting and the prospect of standardized fast test methods in response to a nuclear accident.

Tracking of airborne radionuclides from the damaged Fukushima Dai-ichi nuclear reactors by European networks.

Radioactive emissions into the atmosphere from the damaged reactors of the Fukushima Dai-ichi nuclear power plant (NPP) started on March 12th, 2011. Among the various radionuclides released, iodine-131 ((131)I) and cesium isotopes ((137)Cs and (134)Cs) were transported across the Pacific toward the North American continent and reached Europe despite dispersion and washout along the route of the contaminated air masses. In Europe, the first signs of the releases were detected 7 days later while the first peak of activity level was observed between March 28th and March 30th. Time variations over a 20-day period and spatial variations across more than 150 sampling locations in Europe made it possible to characterize the contaminated air masses. After the Chernobyl accident, only a few measurements of the gaseous (131)I fraction were conducted compared to the number of measurements for the particulate fraction. Several studies had already pointed out the importance of the gaseous (131)I and the large underestimation of the total (131)I airborne activity level, and subsequent calculations of inhalation dose, if neglected. The measurements made across Europe following the releases from the Fukushima NPP reactors have provided a significant amount of new data on the ratio of the gaseous (131)I fraction to total (131)I, both on a spatial scale and its temporal variation. It can be pointed out that during the Fukushima event, the (134)Cs to (137)Cs ratio proved to be different from that observed after the Chernobyl accident. The data set provided in this paper is the most comprehensive survey of the main relevant airborne radionuclides from the Fukushima reactors, measured across Europe. A rough estimate of the total (131)I inventory that has passed over Europe during this period was <1% of the released amount. According to the measurements, airborne activity levels remain of no concern for public health in Europe.

Accumulation of human EGF in nectar of transformed plants of Nicotiana langsdorffii x N. sanderae and transfer to honey by bees.

Honey has been used successfully in wound healing for thousands of years. The peptide hormone human epidermal growth factor (hEGF) is also known to have a beneficial effect in various wound healing processes via mechanisms that differ from those for honey. In this study, we show that hEGF can be incorporated into honey via nectar. Plants of Nicotiana langsdorffii x N. sanderae were transformed with the gene for hEGF, equipped with a nectary-targeted promoter and a signal sequence for secretion to nectar. These plants accumulated hEGF in the nectar. The maximum hEGF concentration recorded with ELISA in these plants is 2.5 ng·ml⁻¹. There is a significant linear relationship (P<0.001) between hEGF concentration and induction of hEGF-receptor phosphorylation. Since the flower morphology of these plants did not allow production of honey from their nectar, we used feeding solutions, spiked with synthetic hEGF, to study transfer of this peptide into honey through bee activity. Transfer of hEGF from a feeding solution to honey by bees occurred with retention of the hEGF concentration and the capacity to induce hEGF-receptor phosphorylation. These observations indicate that plants can function as a production platform for honey containing biologically active peptides, which may enhance wound healing and other biological processes.

International standardisation work on the measurement of radon in air and water.

Radon is considered to be the main source of human exposure to natural radiation. As stated by the World Health Organization, the exposure due to the inhalation of indoor radon is much greater than the one via the ingestion of water as radon degasses from water during handling. In response to these concerns about the universal presence of radon, environmental assessment studies are regularly commissioned to assess the radon exposure of public and workers. The credibility of such studies relies on the quality and reliability of radon analysis as well as on the sample representativeness of the radiological situation. The standard-setting approach, based on consensus, seemed to lend itself to a settlement of technical aspects of potential comparison. At present, two Working Groups of the International Standardization Organization are focussing on drafting standards on radon and its decay products measurement in air and water. These standards, which aim for a set of rigorous metrology practices, will be useful for persons in charge of the initial characterisation of a site with respect to natural radioactivity as well as to those performing the routine surveillance of specific sites.

Medical-grade honey enriched with antimicrobial peptides has enhanced activity against antibiotic-resistant pathogens.

Honey has potent activity against both antibiotic-sensitive and -resistant bacteria, and is an interesting agent for topical antimicrobial application to wounds. As honey is diluted by wound exudate, rapid bactericidal activity up to high dilution is a prerequisite for its successful application. We investigated the kinetics of the killing of antibiotic-resistant bacteria by RS honey, the source for the production of Revamil® medical-grade honey, and we aimed to enhance the rapid bactericidal activity of RS honey by enrichment with its endogenous compounds or the addition of antimicrobial peptides (AMPs). RS honey killed antibiotic-resistant isolates of Pseudomonas aeruginosa, Staphylococcus epidermidis, Enterococcus faecium, and Burkholderia cepacia within 2 h, but lacked such rapid activity against methicillin-resistant S. aureus (MRSA) and extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli. It was not feasible to enhance the rapid activity of RS honey by enrichment with endogenous compounds, but RS honey enriched with 75 µM of the synthetic peptide Bactericidal Peptide 2 (BP2) showed rapid bactericidal activity against all species tested, including MRSA and ESBL E. coli, at up to 10-20-fold dilution. RS honey enriched with BP2 rapidly killed all bacteria tested and had a broader spectrum of bactericidal activity than either BP2 or honey alone.

Liquid chromatographic determination of oestradiol in serum by pre-column derivatization with dansyl chloride or laryl chloride and peroxyoxalate chemiluminescence detection.

Column liquid chromatography with chemiluminescence detection is used to determine oestradiol in serum. Oestradiol is labelled by means of a two-phase derivatization procedure with either dansyl chloride or laryl chloride. After derivatization the excess reagent is removed on a short amino-bonded column: the sulphonyl chloride functional group reacts with the amino groups causing removal of the label; the oestradiol derivatives are not retained. Chromatography of oestradiol derivatives is performed with methanol-water mixtures as eluent. Chemical excitation is carried out by adding bis(2-nitrophenyl)oxalate and hydrogen peroxide dissolved in acetonitrile to the column eluate. Linearity is observed (r = 0.9998; n = 7) over at least three decades (10(-6)-10(-9) M) for both dansyl chloride and laryl chloride. A detection limit of 5 x 10(-10) M (50 fmol injected) has been achieved and the dansyl derivatization method has been applied to the determination of oestradiol in spiked serum.

Naphthalene- and anthracene-2,3-dialdehyde as precolumn labelling reagents for primary amines using reversed- and normal-phase liquid chromatography with peroxyoxalate chemiluminescence detection.

Naphthalene-2,3-dialdehyde (NDA) and anthracene-2,3-dialdehyde (ADA) were applied as pre-column labelling reagents for the peroxyoxalate chemiluminescence detection of primary amines. The advantages of these labels are the selective derivatization reaction with primary amines and the good chemiluminescence properties. A serious disadvantage is the formation of cyanide-induced side-products which are major interferences in reversed-phase chromatography. For normal-phase chromatography, the excess of reagent was removed by adding a polar amine after derivatization, with subsequent extraction of the labelled analyte with an apolar solvent. The detection limit for NDA-labelled fluvoxamine, an anti-depressant, was in the low femtomole range in standard solutions and in urine samples. For ADA-labelled analytes difficulties were obtained with linearity in peroxyoxalate chemiluminescence detection, probably owing to oxidation of the derivative by hydrogen peroxide.

Chemiluminescence detection for high-performance liquid chromatography of biomedical samples.

During recent years, much progress has been made in the development of high-performance liquid chromatographic (HPLC) detection systems based on chemiluminescence (CL). CL is now one of the most sensitive detection methods in HPLC. For many compounds detection limits in the femtogram to picogram range have been obtained. Several on-line post-column reactions have been used for chemical excitation of the analytes. Some theoretical aspects of CL detection are presented and special attention is devoted to the coupling of CL to flow systems. The influence of the kinetics of the reaction on the sensitivity of the detection system is stressed. The mechanisms and detection systems of the peroxyoxalate, luminol and lucigenin CL reaction are described. A few examples of the use of bioluminescence for HPLC detection are given, and some less common CL reactions used in flow systems are also mentioned. Many biomedical and related applications are shown. Possibilities and limitations of the various reactions and detection systems are evaluated.