ABSTRACT
ATB1651 gel is an antifungal drug candidate that enhances antifungal activity through substitution of several aryl rings, alkyl chains, and methyl groups. To ensure safety of use of ATB1651 gel, assessment of its potentially toxic side effects is necessary. In this study, we examined the repeated-dose toxicity of ATB1651 gel to Yucatan minipigs (Sus scrofa) in accordance with the Good Laboratory Practice guidelines. Five doses of ATB1651 gel (0%, 0.2%, 0.5%, 1.0%, 3.0%) were administered dermally to the left and right flanks of 38 minipigs daily for 4 weeks. Mortality, clinical symptoms, dermal scores, body weights, and physiological, biochemical, pathological, and toxicokinetic analyses were performed after the treatment period. No systemic toxicological damage was observed in either male or female minipigs regardless of dose; however, dermal application of ATB1651 gel caused some skin alterations at the application sites. Specifically, erythema and eschar formation, edema, and scabs or raise spots were observed at the application site(s) in males in the 3.0% ATB1651 gel treatment group and in females at ATB1651 gel concentrations ≥ 1.0%, with dermal scores ranging from grade 1 to 2. Additionally, histopathological assay indicated infiltration of different types of inflammatory cells and the presence of pustule/crust at the application site(s) in both males and females at ATB1651 gel concentrations ≥ 0.5%. However, these changes were reversible after a 2-week recovery period and were considered a local irritation effect of ATB1651 gel. The no-observed-adverse-effect level of ATB1651 gel was 3.0% with regard to topical and systemic toxicity in both male and female minipigs. Collectively, our results imply that ATB1651 gel is a safe candidate for clinical development as an antifungal drug with a wide therapeutic window.
ABSTRACT
This study evaluates the corrosion inhibition capabilities of two novel hydrazone derivatives, (E)-2-(5-methoxy-2-methyl-1H-indol-3-yl)-N'-(4-methylbenzylidene)acetohydrazide (MeHDZ) and (E)-N'-benzylidene-2-(5-methoxy-2-methyl-1H-indol-3-yl)acetohydrazide (HHDZ), on carbon steel in a 15 wt.% HCl solution. A comprehensive suite of analytical techniques, including gravimetric analysis, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM), demonstrates their significant inhibition efficiency. At an optimal concentration of 5 × 10-3 mol/L, MeHDZ and HHDZ achieve remarkable inhibition efficiencies of 98% and 94%, respectively. EIS measurements reveal a dramatic reduction in effective double-layer capacitance (from 236.2 to 52.8 and 75.3 µF/cm2), strongly suggesting inhibitor adsorption on the steel surface. This effect is further corroborated by an increase in polarization resistance and a significant decrease in corrosion current density at optimal concentrations. Moreover, these inhibitors demonstrate sustained corrosion mitigation over extended exposure durations and maintain effectiveness even under elevated temperatures, highlighting their potential for diverse operational conditions. The adsorption process of these inhibitors aligns well with the Langmuir adsorption isotherm, implying physicochemical interactions at the carbon steel surface. Density functional tight-binding (DFTB) calculations and molecular dynamics simulations provide insights into the inhibitor-surface interaction mechanism, further elucidating the potential of these hydrazone derivatives as highly effective corrosion inhibitors in acidic environments.
ABSTRACT
The casein kinase 2 (CK2) complex has garnered extensive attention over the past decades as a potential therapeutic target for diverse human diseases, including cancer, diabetes, and obesity, due to its pivotal roles in eukaryotic growth, differentiation, and metabolic homeostasis. While CK2 is also considered a promising antifungal target, its role in fungal pathogens remains unexplored. In this study, we investigated the functions and regulatory mechanisms of the CK2 complex in Cryptococcus neoformans, a major cause of fungal meningitis. The cryptococcal CK2 complex consists of a single catalytic subunit, Cka1, and two regulatory subunits, Ckb1 and Ckb2. Our findings show that Cka1 plays a primary role as a protein kinase, while Ckb1 and Ckb2 have major and minor regulatory functions, respectively, in growth, cell cycle control, morphogenesis, stress response, antifungal drug resistance, and virulence factor production. Interestingly, triple mutants lacking all three subunits (cka1Δ ckb1Δ ckb2Δ) exhibited more severe phenotypic defects than the cka1Δ mutant alone, suggesting that Ckb1/2 may have Cka1-independent functions. In a murine model of systemic cryptococcosis, cka1Δ and cka1Δ ckb1Δ ckb2Δ mutants showed severely reduced virulence. Transcriptomic, proteomic, and phosphoproteomic analyses further revealed that the CK2 complex controls a wide array of effector proteins involved in transcriptional regulation, cell cycle control, nutrient metabolisms, and stress responses. Most notably, CK2 disruption led to dysregulation of key signaling cascades central to C. neoformans pathogenicity, including the Hog1, Mpk1 MAPKs, cAMP/PKA, and calcium/calcineurin signaling pathways. In summary, our study provides novel insights into the multifaceted roles of the fungal CK2 complex and presents a compelling case for targeting it in the development of new antifungal drugs.IMPORTANCEThe casein kinase 2 (CK2) complex, crucial for eukaryotic growth, differentiation, and metabolic regulation, presents a promising therapeutic target for various human diseases, including cancer, diabetes, and obesity. Its potential as an antifungal target is further highlighted in this study, which explores CK2's functions in C. neoformans, a key fungal meningitis pathogen. The CK2 complex in C. neoformans, comprising the Cka1 catalytic subunit and Ckb1/2 regulatory subunits, is integral to processes like growth, cell cycle, morphogenesis, stress response, drug resistance, and virulence. Our findings of CK2's role in regulating critical signaling pathways, including Hog1, Mpk1 MAPKs, cAMP/PKA, and calcium/calcineurin, underscore its importance in C. neoformans pathogenicity. This study provides valuable insights into the fungal CK2 complex, reinforcing its potential as a target for novel antifungal drug development and pointing out a promising direction for creating new antifungal agents.
Subject(s)
Cryptococcosis , Cryptococcus neoformans , Diabetes Mellitus , Meningitis, Fungal , Neoplasms , Animals , Mice , Humans , Casein Kinase II/genetics , Casein Kinase II/metabolism , Cryptococcus neoformans/metabolism , Antifungal Agents/metabolism , Calcium/metabolism , Calcineurin/metabolism , Proteomics , Signal Transduction , Cryptococcosis/microbiology , ObesityABSTRACT
INTRODUCTION: Corrosion-induced deterioration of infrastructure is a growing global concern. The development and application of corrosion inhibitors are one of the most effective approaches to protect steel rebar from corrosion. Hence, this study focuses on a novel hydrazone derivative, (E)-N'-(4-(dimethylamino)benzylidene)-2-(5-methoxy-2-methyl-1H-indol-3-yl)aceto-hydrazide (HIND), and its potential application to mitigate corrosion in steel rebar exposed to chloride-contaminated concrete pore solutions (ClSCPS). OBJECTIVES: The research aims to evaluate the anti-corrosion capabilities of HIND on steel rebar within a simulated corrosive environment, focusing on the mechanisms of its inhibitory effect. METHODS: The corrosion of steel rebar exposed to the ClSCPS was studied through weight loss and electrochemical methods. The surface morphology of steel rebar surface was characterized by FE-SEM-EDS, AFM; oxidation states of the steel rebar and crystal structures were examined using X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) methods. Further, experimental findings were complemented by theoretical studies using self-consistent-charge density-functional tight-binding (SCC-DFTB) simulations. The performance of HIND was monitored at an optimal concentration over a period of 30 days. RESULTS: The results indicated a significant reduction in steel rebar corrosion upon introducing HIND. The inhibitor molecules adhered to the steel surface, preventing further deterioration and achieving an inhibition efficiency of 88.4% at 0.5 mmol/L concentration. The surface morphology analysis confirmed the positive effect of HIND on the rebar surface, showing a decrease in the surface roughness of the steel rebar from 183.5 in uninhibited to 50 nm in inhibited solutions. Furthermore, SCC-DFTB simulations revealed the presence of coordination between iron atoms and HIND active sites. CONCLUSION: The findings demonstrate the potential of HIND as an effective anti-corrosion agent in chloride-contaminated environments. Its primary adsorption mechanism involves charge transfer from the inhibitor molecules to iron atoms. Therefore, applying HIND could be an effective strategy to address corrosion-related challenges in reinforced infrastructure.
ABSTRACT
The corrosion of materials remains a critical challenge with significant economic and infrastructural impacts. A comprehensive understanding of adsorption characteristics of phytochemicals can facilitate the effective design of high-performing environmentally friendly inhibitors. This study conducted a computational exploration of hydroxytyrosol (HTR) and tyrosol (TRS) (potent phenolic compounds found in olive leaf extracts), focusing on their adsorption and reactivity on iron surfaces. Utilizing self-consistent-charge density-functional tight-binding (SCC-DFTB) simulations, molecular dynamics (MD) simulations, and quantum chemical calculations (QCCs), we investigated the molecules' structural and electronic attributes and interactions with iron surfaces. The SCC-DFTB results highlighted that HTR and TRS coordinated with iron atoms when adsorbed individually, but only HTR maintained bonding when adsorbed alongside TRS. At their individual adsorption, HTR and TRS had interaction energies of -1.874 and -1.598 eV, which became more negative when put together (-1.976 eV). The MD simulations revealed parallel adsorption under aqueous and vacuum conditions, with HTR demonstrating higher adsorption energy. The analysis of quantum chemical parameters, including global and local reactivity descriptors, offered crucial insights into molecular reactivity, stability, and interaction-prone atomic sites. QCCs revealed that the fraction of transferred electron ∆N aligned with SCC-DFTB results, while other parameters of purely isolated molecules failed to predict the same. These findings pave the way for potential advancements in anticorrosion strategies leveraging phenolic compounds.
ABSTRACT
Exterior finishes protect reinforced concrete buildings against environmental factors, improve their durability, and enhance their exterior design. In this study, the influence of different metal types used in arc thermal metal spraying on the adhesion between concrete and metal coatings was analyzed. Five metals with different melting points were tested, and the differences between their melting points and surface temperatures immediately after thermal spraying were measured. The bonding strength of each metal was evaluated. Additionally, the interface between the concrete surface and metal coating was analyzed using image analysis and optical microscopy. The results demonstrated that Zn achieved the highest bonding strength (1.84 MPa), which had the lowest melting point and surface temperature immediately after spraying, while Cu/Sn achieved the lowest strength (1.38 MPa), which had the highest temperatures. The bonding strength had a closer relationship (R2 = 0.9946) with the difference between the melting point and surface temperature immediately after spraying than that (R2 = 0.9589) with the surface temperature immediately after spraying. The bonding strength increased as the ratio of the non-interfacial failure area to the total area increased, ensuring a stronger attachment to the concrete surface. Overall, the results showed that the bonding strength was significantly affected by the metal type.
ABSTRACT
The development of corrosion inhibitors with outstanding performance is a never-ending and complex process engaged in by researchers, engineers and practitioners. The computational assessment of organic corrosion inhibitors' performance is a crucial step towards the design of new task-specific materials. Herein, the electronic features, adsorption characteristics and bonding mechanisms of two pyridine oximes, namely 2-pyridylaldoxime (2POH) and 3-pyridylaldoxime (3POH), with the iron surface were investigated using molecular dynamics (MD), and self-consistent-charge density-functional tight-binding (SCC-DFTB) simulations. SCC-DFTB simulations revealed that the 3POH molecule can form covalent bonds with iron atoms in its neutral and protonated states, while the 2POH molecule can only bond with iron through its protonated form, resulting in interaction energies of -2.534, -2.007, -1.897, and -0.007 eV for 3POH, 3POH+, 2POH+, and 2POH, respectively. Projected density of states (PDOSs) analysis of pyridines-Fe(110) interactions indicated that pyridine molecules were chemically adsorbed on the iron surface. Quantum chemical calculations (QCCs) revealed that the energy gap and Hard and Soft Acids and Bases (HSAB) principles were efficient in predicting the bonding trend of the molecules investigated with an iron surface. 3POH had the lowest energy gap of 1.706 eV, followed by 3POH+ (2.806 eV), 2POH+ (3.121 eV), and 2POH (3.431 eV). In the presence of a simulated solution, MD simulation showed that the neutral and protonated forms of molecules exhibited a parallel adsorption mode on an iron surface. The excellent adsorption properties and corrosion inhibition performance of 3POH may be attributed to its low stability compared to 2POH molecules.
ABSTRACT
Blocking of nutrient uptake and amino acid biosynthesis are considered potential targets for next-generation antifungal drugs against pathogenic fungi, including Cryptococcus neoformans. In this regard, the sulfate assimilation pathway is particularly attractive, as it is only present in eukaryotes such as plants and fungi, yet not in mammals. Here, we demonstrated that the adenylyl sulfate kinase (Met14) in the sulfate assimilation pathway is not essential yet is required for the viability of C. neoformans due to its involvement in biosynthesis of two sulfur-containing amino acids, cysteine and methionine. Met14-dependent cysteine and methionine biosynthesis was found to significantly contribute to a diverse range of pathobiological processes in C. neoformans. Met14-dependent cysteine rather than methionine biosynthesis was also found to play pivotal roles in cell growth and tolerance to environmental stresses and antifungal drugs. In contrast, the Met14-dependent methionine biosynthesis was found to be more important than cysteine biosynthesis for the production of major cryptococcal virulence factors of melanin pigments and polysaccharide capsules. Finally, we also found that despite its attenuated virulence in an insect model, Galleria mellonella, the met14Δ mutant yielded no difference in virulence in a murine model of systemic cryptococcosis. Hence, clinical inhibition of Met14-dependent amino acid biosynthetic pathways may not be advantageous for the treatment of systemic cryptococcosis. IMPORTANCE Current antifungal drugs have several limitations, such as drug resistance, severe side effects, and a narrow spectrum. Therefore, novel antifungal targets are urgently needed. To this end, fungal sulfur amino acid biosynthetic pathways are considered potential targets for development of new antifungal agents. Here, we demonstrated that Met14 in the sulfate assimilation pathway promotes growth, stress response, and virulence factor production in C. neoformans via synthesis of sulfur-containing amino acids methionine and cysteine. Met14-dependent cysteine rather than methionine synthesis was found to be critical for growth and stress responses, whereas Met14-dependent methionine synthesis was more important for the production of antiphagocytic capsules and antioxidant melanin in C. neoformans. Surprisingly, deletion of the MET14 gene was found to attenuate cryptococcal virulence in an insect model, yet not in a murine model. Collectively, our results showed that Met14-dependent cysteine and methionine biosynthesis play roles that are distinct from each other in C. neoformans. Moreover, Met14 is unlikely to be a suitable anticryptococcal drug target.
Subject(s)
Cryptococcosis , Cryptococcus neoformans , Animals , Mice , Cryptococcus neoformans/genetics , Cysteine/metabolism , Antifungal Agents/pharmacology , Antifungal Agents/metabolism , Disease Models, Animal , Melanins/metabolism , Melanins/pharmacology , Capsules/metabolism , Capsules/pharmacology , Cryptococcosis/microbiology , Virulence Factors/metabolism , Methionine/metabolism , Methionine/pharmacology , Sulfur/metabolism , Sulfates/metabolism , Sulfates/pharmacology , MammalsABSTRACT
The surface treatment of concrete enhances the bonding of its metal coatings. Therefore, in the present study, on the concrete surface, prior to the deposit of an 85Zn-15Al coating via an arc thermal spraying process, different surface treatments were considered for the effective electromagnetic pulse (EMP) shielding properties of the concrete. However, the direct coating on a concrete surface possesses lower bond adhesion, therefore it is of the utmost importance to treat the concrete surface prior to the deposition of the metal coating. Moreover, to obtain better bond adhesion and fill the defects of the coating, the concrete surface is treated by applying a surface hardener (SH), as well as a surface roughening agent (SRA) and a sealing agent (SA), respectively. The metal spraying efficiency, adhesion performance, and bonding strength under different concrete surface treatment conditions were evaluated. The EMP shielding effect was evaluated under the optimal surface treatment condition. The proposed method for EMP shielding exhibited over 60% of spraying efficiency on the treated surface and a bonding strength of up to 3.9 MPa for the SH-SRA-SA (combining surface roughening and pores/defects filling agents) specimen compared to the control one, i.e., 0.8 MPa. The EMP shielding values of the surface-treated concrete with surface hardener, surface roughening agent, and sealing agent, i.e., SH-SRA-SA specimens, exhibited 96.6 dB at 1000 MHz. This was about 12 times higher than without coated concrete.
ABSTRACT
When exposed to an external electric field, lipid bilayer membranes are subject to increased permeability through the generation of pores. Combining this phenomenon, known as electroporation, with liposomal drug delivery offers the added benefit of on-demand release of the liposomal cargo. In previous studies, the maximum percent drug release when exposing liposomes to a pulsed electric field has not surpassed 30%, indicating most of the drug is still retained in the liposomes. Here we showed that by modulating the fluidity of the liposome membrane through appropriate selection of the primary lipid, as well as the addition of other fluidity modulating components such as cholesterol and biotinylated lipid, the electroporation-induced percent release could be increased to over 50%. In addition to improved induced release from liposomes in suspension, biomaterial scaffold-bound liposomes were developed. Electroporation-induced protein release from this solid phase was verified after performing further optimization of the liposome formulation to achieve increased stability at physiological temperatures. Collectively, this work advances the ability to achieve efficient electroporation-induced liposomal drug delivery, which has the potential to be used in concert with other clinical applications of electroporation, such as gene electrotransfer and irreversible electroporation (IRE), in order to synergistically increase treatment efficacy.
Subject(s)
Drug Delivery Systems , Liposomes , Drug Liberation , Lipid Bilayers , Electroporation , SuspensionsABSTRACT
The acid treatment process of production wells is one of the most acid-induced corrosive processes. Corrosion inhibitors are an effective tool to inhibit the acids employed in acidizing treatments. Herein, new eco-friendly hydrazone-based compounds, namely, 2-(4-isobutylphenyl)-N-((1E,2E)-3-phenylallylidene) propanehydrazide (IPP) and N'-cyclohexylidene-2-[4-(2-methylpropyl)phenyl] propanehydrazide (CIP), were prepared through the functionalization of ibuprofen (IBF) and applied for corrosion mitigation of N80 steel in 15 wt % HCl (referred to hereafter as blank). The anticorrosion performance of selected compounds was investigated by employing weight loss (WL), potentiodynamic polarization curves (PPCs), and electrochemical impedance spectroscopy (EIS), complemented by scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses. In addition, density functional theory-based tight-binding (DFTB) modeling was conducted to get molecular-level insights into inhibitor-metal bonding. Experimental results revealed excellent long-term corrosion inhibition efficiency at very low concentrations of inhibitors and a mixed-type inhibition process. Numerically, N80 steel polarization resistance increased from 5.51 Ω cm2 in blank to 608.4 and 396 Ω cm2 in blank inhibited with 5 × 10-3 mol/L of IPP and CIP, respectively, equivalent to 99% and 98% inhibition efficiency based on EIS experiments. Besides, SEM and AFM images showed that, after addition to 15 wt % HCl, inhibitors could effectively prevent the acid attack on the N80 steel surface. The fitting of experimental data to adsorption isotherms indicated that inhibitors' adsorption followed the Langmuir isotherm model and mixed physicochemical adsorption on the metal surface. The DFTB simulation revealed that inhibitor molecules can create covalent and physical interactions with iron atoms, which is further confirmed by partial density of states (PDOSs) analysis.
Subject(s)
Hydrazones , Steel , Steel/chemistry , Corrosion , Oil and Gas Fields , AcidsABSTRACT
Pyrimidine compounds have proven to be effective and efficient additives capable of protecting mild steel in acidic media. This class of organic compounds often functions as adsorption-type inhibitors of corrosion by forming a protective layer on the metallic substrate. The present study reports a computational study of forty pyrimidine compounds that have been investigated as sustainable inhibitors of mild steel corrosion in molar HCl solution. Quantitative structure property relationship was conducted using linear (multiple linear regression) and nonlinear (artificial neural network) models. Standardization method was employed in variable selection yielding five top chemical descriptors utilized for model development along with the inhibitor concentration. Multiple linear regression model yielded a fair predictive model. Artificial neural network model developed using k-fold cross-validation method provided a comprehensive insight into the corrosion protection mechanism of studied pyrimidine-based corrosion inhibitors. Using a multilayer perceptron with Levenberg-Marquardt algorithm, the study obtained the optimal model having a MSE of 8.479, RMSE of 2.912, MAD of 1.791, and MAPE of 2.648. The optimal neural network model was further utilized to forecast the protection capacities of nine non-synthesized pyrimidine derivatives. The predicted inhibition efficiencies ranged from 89 to 98%, revealing the significance of the considered chemical descriptors, the predictive capacity of the developed model, and the potency of the theoretical inhibitors.
Subject(s)
Quantitative Structure-Activity Relationship , Steel , Corrosion , Neural Networks, Computer , Pyrimidines , Steel/chemistryABSTRACT
The fabrication of freestanding bendable films without polymer substrates is demonstrated as a capacitive humidity-sensing material. The bendable and porous SiO2/Si films are simply prepared by electrochemical-assisted stripping, metal-assisted chemical etching, followed by oxidation procedures. The capacitive humidity-sensing properties of the fabricated porous SiO2/Si film are characterized as a function of the relative humidity and frequency. The remarkable sensing performance is demonstrated in the wide RH range from 13.8 to 79.0%. The sensing behavior of the porous SiO2/Si film is studied by electrochemical impedance spectroscopy analysis. Additionally, the reliability of the porous SiO2/Si sensing material is confirmed by cyclic and long-term sensing tests.
ABSTRACT
Reinforced concrete is among the most multifaceted materials used in the construction field. Maintaining the resistance of reinforced concrete to weathering, abrasion, and chemical attack, particularly in aggressive natural conditions such as seawater environments, is challenging. The main factor in the degradation of reinforced-concrete durability is chloride penetration, which accelerates iron alloy corrosion and facilitates structural degradation. In this study, calcium-iron-based layered double hydroxides (CaFe-LDHs) were fabricated at room temperature, followed by structural modulation, and their effectiveness in mitigating iron alloy corrosion due to chloride ions (in 3.5 wt% of NaCl) was investigated. The synthesized CaFe-LDHs with phase transfer notably improved the Cl- removal capacity (Qmax) to 881.83 mg/g, which is more than three times that reported based on previous studies. The novelty of this research lies in the sophisticated structural and phase transformations of the as-synthesized CaFe-LDHs, determination of crucial factors for chloride ion removal, and suggestion of calcium-iron-based layered double oxide (CaFe-LDO)-based chloride ion removal mechanisms considering chemical and ion-exchange reactions. Moreover, when the phase-transformed LDHs, C-700 LDOs, were applied to inhibit iron alloy corrosion, a noticeable inhibition efficiency of 98.87% was obtained, which was an 11-fold improvement compared to the case of iron alloys without LDOs. We believe this work can provide new insights into the design of CaFe-LDOs for the enhancement of the lifespan of reinforced concrete structures.
ABSTRACT
Structural health monitoring (SHM) can be more efficient with the application of a wireless sensor network (WSN). However, the hardware that makes up this system should have sufficient performance to sample the data collected from the sensor in real-time situations. High-performance hardware can be used for this purpose, but is not suitable in this application because of its relatively high power consumption, high cost, large size, and so on. In this paper, an optimal remote monitoring system platform for SHM is proposed based on pulsed eddy current (PEC) that is utilized for measuring the corrosion of a steel-framed construction. A circuit to delay the PEC response based on the resistance-inductance-capacitance (RLC) combination was designed for data sampling to utilize the conventional hardware of WSN for SHM, and this approach was verified by simulations and experiments. Especially, the importance of configuring sensing modules and the WSN for remote monitoring were studied, and the PEC responses caused by the corrosion of a specimen made with steel were able to be sampled remotely using the proposed system. Therefore, we present a remote SHM system platform for diagnosing the corrosion condition of a building with a steel structure, and proving its viability with experiments.
ABSTRACT
Supplementary cementitious materials (SCMs) and chemical additives (CA) are incorporated to modify the properties of concrete. In this paper, SCMs such as fly ash (FA), ground granulated blast furnace slag (GGBS), silica fume (SF), rice husk ash (RHA), sugarcane bagasse ash (SBA), and tire-derived fuel ash (TDFA) admixed concretes are reviewed. FA (25-30%), GGBS (50-55%), RHA (15-20%), and SBA (15%) are safely used to replace Portland cement. FA requires activation, while GGBS has undergone in situ activation, with other alkalis present in it. The reactive silica in RHA and SBA readily reacts with free Ca(OH)2 in cement matrix, which produces the secondary C-S-H gel and gives strength to the concrete. SF addition involves both physical contribution and chemical action in concrete. TDFA contains 25-30% SiO2 and 30-35% CaO, and is considered a suitable secondary pozzolanic material. In this review, special emphasis is given to the various chemical additives and their role in protecting rebar from corrosion. Specialized concrete for novel applications, namely self-curing, self-healing, superhydrophobic, electromagnetic (EM) wave shielding and self-temperature adjusting concretes, are also discussed.
ABSTRACT
An attempt has been made on a constructive approach to evaluate the performance of snail shell ash (SSA) for its corrosion performance under marine environments. Corrosion performance of steel rebar in chloride-contaminated SSA with (0% to 50%) replacement levels of cement extract medium was examined through electrochemical and weight loss techniques. Initially, snail shell powder (SSP) is made by pulverizing and subsequently SSA is by thermal decomposition methods. Both SSP and SSA were characterized by X-ray diffraction, Fourier transforms infrared spectroscopy, scanning electron microscopy, and energy dispersion X-ray spectroscopy. Concrete cubes with 0% to 50% replacement levels of cement by SSA were evaluated for their mechanical properties. A critical level of 20 to 30% SSA improved both corrosion resistance and strength of concrete. Extrapolation modeling for the strength and corrosion rate with respect to later age were made. SSA is a suitable replacement material for natural limestone in cement productions.
ABSTRACT
Zinc (Zn) coating is being used to protect steel structures from corrosion. There are different processes to deposit the coating onto a steel substrate. Therefore, in the present study, a 100 µm thick Zn coating was deposited by arc and plasma arc thermal spray coating processes, and the corrosion resistance performance was evaluated in artificial seawater. Scanning electron microscopy (SEM) results showed that the arc thermal spray coating exhibited splats and inflight particles, whereas plasma arc spraying showed a uniform and dense morphology. When the exposure periods were extended up to 23 d, the corrosion resistance of the arc as well as the plasma arc thermal spray coating increased considerably. This is attributed to the blocking characteristics of the defects by the stable hydrozincite (Zn5(OH)6(CO3)2).
ABSTRACT
In the present study, 0.115 M L-arginine (LA) has been used as an eco-friendly inhibitor in simulated concrete pore solutions (SP-0) in order to form passive films on a steel rebar-solution interface until 144 h. Hence, 0.51 (SP-1) and 0.85 M NaCl (SP-2) were added in LA containing SP-0 solution to breakdown the passive film and to initiate corrosion reactions. The electrochemical results show that the charge transfer resistance (Rct) of steel rebar exposed to SP-1 and SP-2 solutions increased with respect to immersion periods. The sample exposed to the SP-2 solution initiated the corrosion reaction at the steel rebar-solution interface after 24 h of NaCl addition and formed pits; on the other hand, the sample without NaCl added, i.e., SP-0, showed agglomeration and dense morphology of corrosion products.
ABSTRACT
The present study has been focused on the environment-friendly corrosion inhibitor. Conifer cone (Pinus resinosa) has been used as a novel corrosion inhibitor to mitigate the corrosion of steel rebars in simulated concrete pore solutions (SCPS) in the presence and absence of chloride ions. The corrosion inhibitor is extracted by simple chemical methods. The functional groups present in the extracted conifer cone (ECC) powder are characterized as well as the surface morphology of ECC has been examined. The corrosion inhibition performance has been evaluated by the electrochemical and weight loss methods. The experimental results indicate that ECC possesses a corrosion inhibition efficiency of 81.2% at a dosage of 1000 mg·L-1, after 720 h of immersion in chloride-contaminated SCPS. Adsorption isotherm and their standard Gibbs free energy (ΔGads0) values are calculated by Langmuir, Freundlich, and Temkin isotherm methods, and the results indicate that the ECC is initially adsorbed on the steel rebar surface by physisorption and then it turns to chemisorption. The steel rebar surfaces have been characterized after exposure to the ECC containing SCPS, and the results indicate that the ECC containing cationic adsorbate molecules, which interact with steel rebar, leads to retardation of metal dissolution in corrosive chloride medium.