ABSTRACT
Sodium-ion batteries (SIBs) are a promising substitute for lithium batteries due to their abundant resources and low cost. Metal sulfides are regarded as highly attractive anode materials due to their superior mechanical stability and high theoretical specific capacity. Guided by the density functional theory (DFT) calculations, 3D porous network shaped Sb2S3/FeS2 composite materials with reduced graphene oxide (rGO) through a simple solvothermal and calcination method, which is predicted to facilitate favorable Na+ ion diffusion, is synthesized. Benefiting from the well-designed structure, the resulting Sb2S3/FeS2 exhibit a remarkable reversible capacity of 536 mAh g-1 after 2000 cycles at a current density of 5 A g-1 and long high-rate cycle life of 3000 cycles at a current density of 30 A g-1 as SIBs anode. In situ and ex situ analyses are carried out to gain further insights into the storage mechanisms and processes of sodium ions in Sb2S3/FeS2@rGO composites. The significantly enhanced sodium storage capacity is attributed to the unique structure and the heterogeneous interface between Sb2S3 and FeS2. This study illustrates that combining rGO with heterogeneous engineering can provide an ideal strategy for the synthesis of new hetero-structured anode materials with outstanding battery performance for SIBs.
ABSTRACT
In order to improve the surface quality of copper after laser remelting, this article took laser frequency, pulse width, and energy density as the research objects and used scanning electron microscopy (SEM), a laser confocal three-dimensional measurement instrument, hardness tester, and friction and wear measurement instrument to study the surface morphology, surface roughness, microhardness, and wear resistance of copper, respectively. The results indicate that the frequency, pulse width, and energy density of laser remelting could directly affect the surface quality of the sample, but the influence of frequency and pulse width was more significant. When the laser remelting frequency was 10 Hz, the pulse width was 10 ms, and the energy density was 132.69 J/mm2, the sample exhibited good surface morphology, roughness, and wear resistance. The relevant research in this article can provide a good reference for the laser surface treatment of copper-based materials.
ABSTRACT
Recently, it has been reported that MXene is a promising pseudocapacitive material for energy storage, primarily due to its intercalation mechanism. However, Ti3C2Tx MXenes face challenges, such as inadequate layer spacing and low specific capacity, which greatly hinder their potential as anode materials for sodium storage. In this study, MXene was doped with sulfur to create a three-dimensional porous structure that resulted in an increased layer spacing. The sulfur-doped porous MXene (SPM) demonstrated exceptional performance as sodium ion battery anodes, with a capacity of 335.2 mA h g-1 after 490 cycles at 2 A g-1 and a long-term cycling performance of 256.1 mA h g-1 even after 2480 cycles at 5 A g-1. It is worth noting that the porous structure formed after sulfur-doping exhibits superior sodium storage performance compared to previously reported MXene-based electrodes. This highlights the feasibility of the structural construction strategy, offering an effective solution for energy storage and conversion applications.
ABSTRACT
Exploring anode materials with an excellent electrochemical performance is of great significance for supercapacitor applications. In this work, a N-doped-carbon-nanofiber (NCNF)-supported Fe3C/Fe2O3 nanoparticle (NCFCO) composite was synthesized via the facile carbonizing and subsequent annealing of electrospinning nanofibers containing an Fe source. In the hybrid structure, the porous carbon nanofibers used as a substrate could provide fast electron and ion transport for the Faradic reactions of Fe3C/Fe2O3 during charge-discharge cycling. The as-obtained NCFCO yields a high specific capacitance of 590.1 F g-1 at 2 A g-1, superior to that of NCNF-supported Fe3C nanoparticles (NCFC, 261.7 F g-1), and NCNFs/Fe2O3 (NCFO, 398.3 F g-1). The asymmetric supercapacitor, which was assembled using the NCFCO anode and activated carbon cathode, delivered a large energy density of 14.2 Wh kg-1 at 800 W kg-1. Additionally, it demonstrated an impressive capacitance retention of 96.7%, even after 10,000 cycles. The superior electrochemical performance can be ascribed to the synergistic contributions of NCNF and Fe3C/Fe2O3.