Wireless Powered Microwave-Light Conversion Platform with Dual-Stimulus Nanoresponder Coating for Deep-Seated Photodynamic Therapy.

Traditional external field-assisted therapies, e.g., microwave (MW) therapy and phototherapy, cannot effectively and minimally damage eliminate deep-seated infection, owing to the poor penetrability of light and low reactive oxygen species (ROS) stimulation capability of MW. Herein, an implantable and wireless-powered therapeutic platform (CNT-FeTHQ-TS), in which external MW can be converted into internal light via MW wireless-powered light-emitting chips, is designed to eradicate deep-seated tissue infections by MW-induced deep-seated photodynamic therapy. In application, CNT-FeTHQ-TS is implanted at internal lesions, and the chip emits light under external MW irradiation. Subsequently, CNT-FeTHQ coating in the platform can respond to both MW and light simultaneously to generate ROS and MW-hyperthermia for rapid and precise sterilization at focus. Importantly, MW also improves the photodynamic performance of CNT-FeTHQ by introducing vacancies in FeTHQ to facilitate the photoexcitation process and changing the spin state of electrons to inhibit the complexation of photogenerated electron-hole pairs, which were confirmed by simulation calculations and in situ MW-irradiated photoluminescence experiments. In vivo, CNT-FeTHQ-TS can effectively cure mice with Staphylococcus aureus infection in dorsal subcutaneous tissue. This work overcomes the key clinical limitations of safe energy transmission and conversion for treating deep-seated infections.

Development and application of a cycleave dual-probe fluorescence quantitative PCR method for simultaneous detection of Mycoplasma gallisepticum ts-11 vaccine strain and non-ts-11 strains.

An attenuated vaccine against the Mycoplasma gallisepticum ts-11 strain has become an effective prevention and control method against MG infection. However, the ts-11 strain is usually difficult to distinguish from the non-ts-11 strain (including field isolates and other vaccine strains (F and 6/85)). Therefore, it is critical to establish a rapid and effective method to distinguish ts-11 strains from non-ts-11 strains. The gene sequences of the ts-11 strain (CP044225.1) and the non-ts-11 strain (including the wild-type (CP006916.3), 6/85 (CP044224.1), and F strains (NC_017503.1) were used to construct a conserved region containing a single point mutation in the potC gene in the ts-11 strain, after which a primer-probe combination method was designed. The primer-probe method was able to accurately and efficiently identify the ts-11 and non-ts-11 strains with minimum detection limits of 2.43 copies/µL and 1.65 copies/µL, respectively. Moreover, it could simultaneously distinguish the ts-11 strain from a non-ts-11 strain, and amplifications of avian influenza virus, infectious bronchitis virus, Newcastle disease virus, fowl adenovirus, infectious laryngotracheitis virus, infectious bursal disease virus, chicken anemia virus, Marek's disease virus, Mycoplasma synoviae, and Ornithobacter rhinotracheale were negative. The detection of clinical samples revealed that the established dual-probe fluorescence quantitative PCR method could be used to screen for mixed and single infections of the ts-11 strain and non-ts-11 strains effectively, with lower variation coefficients for intra- and interbatch repetition. The established cycleave dual-probe fluorescence quantitative PCR method showed good specificity, sensitivity, and repeatability and provides powerful technical support for the rapid and efficient differential diagnosis of the MG ts-11 strain from non-ts-11 strains.

Poloxamer 407 modified collagen/ß-tricalcium phosphate scaffold for localized delivery of alendronate.

Systemic administration of alendronate is associated with various adverse reactions in clinical settings. To mitigate these side effects, poloxamer 407 (P-407) modified with cellulose was chosen to encapsulate alendronate. This drug-loaded system was then incorporated into a collagen/ß-tricalcium phosphate (ß-TCP) scaffold to create a localized drug delivery system. Nuclear magnetic resonance spectrum and rheological studies revealed hydrogen bonding between P-407 and cellulose as well as a competitive interaction with water that contributed to the delayed release of alendronate (ALN). Analysis of the degradation kinetics of P-407 and release kinetics of ALN indicated zero-order kinetics for the former and Fickian or quasi-Fickian diffusion for the latter. The addition of cellulose, particularly carboxymethyl cellulose (CMC), inhibited the degradation of P-407 and prolonged the release of ALN. The scaffold's structure increased the contact area of P-407 with the PBS buffer, thereby, influencing the release rate of ALN. Finally, biocompatibility testing demonstrated that the drug delivery system exhibited favorable cytocompatibility and hemocompatibility. Collectively, these findings suggest that the drug delivery system holds promise for implantation and bone healing applications.

Applications of artificial intelligence for surgical extraction in stomatology: a systematic review.

OBJECTIVES: Artificial intelligence (AI) has been extensively used in the field of stomatology over the past several years. This study aimed to evaluate the effectiveness of AI-based models in the procedure, assessment, and treatment planning of surgical extraction. STUDY DESIGN: Following Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines, a comprehensive search was conducted on the Web of Science, PubMed/MEDLINE, Embase, and Scopus databases, covering English publications up to September 2023. Two reviewers performed the study selection and data extraction independently. Only original research studies utilizing AI in surgical extraction of stomatology were included. The Cochrane risk of bias tool for randomized trials (RoB 2) was selected to perform the quality assessment of the selected literature. RESULTS: From 2,336 retrieved references, 35 studies were deemed eligible. Among them, 28 researchers reported the pioneering role of AI in segmentation, classification, and detection, aligning with clinical needs. In addition, another 7 studies suggested promising results in tooth extraction decision-making, but further model refinement and validation were required. CONCLUSIONS: Integration of AI in stomatology surgical extraction has significantly progressed, enhancing decision-making accuracy. Combining and comparing algorithmic outcomes across studies is essential for determining optimal clinical applications in the future.

Tolerability and Safety of Large-Volume Hyaluronidase-Facilitated Subcutaneous Immunoglobulin 10% Administered with or without Dose Ramp-Up: A Phase 1 Study in Healthy Participants.

PURPOSE: Facilitated subcutaneous immunoglobulin (fSCIG; immune globulin infusion 10% [human] with recombinant human hyaluronidase [rHuPH20]) permits high-volume subcutaneous immunoglobulin (SCIG) infusion, shorter infusion times and reduced dosing frequency relative to conventional SCIG. It is initiated by gradually increasing infusion volumes over time (dose ramp-up) to achieve target dose level (TDL). Whether ramp-up strategies have tolerability or safety advantages over direct initiation at full TDL has not been evaluated clinically. METHODS: This phase 1 open-label study assessed tolerability and safety of fSCIG 10% with accelerated or no ramp-up compared with conventional ramp-up in healthy adults (NCT04578535). Participants were assigned to one of the three ramp-up arms to achieve TDLs of 0.4 or 1.0 g/kg/infusion. The primary endpoint was the proportion of infusions completed without interruption or infusion rate reduction owing to treatment-emergent adverse events (TEAEs). Safety was assessed as a secondary endpoint. RESULTS: Of 51 participants enrolled, 50 (98.0%) tolerated all fSCIG 10% infusions initiated (n = 174). Infusion rate was reduced in one participant owing to headache in the 0.4 g/kg/infusion conventional ramp-up arm. Study discontinuations were higher in the no ramp-up arm (70%) versus the conventional (0%) and accelerated (22%) arms at the 1.0 g/kg/infusion TDL. Safety outcomes did not substantially differ between treatment arms. CONCLUSION: The favorable tolerability and safety profiles of fSCIG 10% in healthy participants support initiating treatment with fSCIG 10% with accelerated ramp-up at TDLs up to 1.0 g/kg. Data support no ramp-up at TDLs close to 0.4 g/kg but additional data are needed for higher doses.

Merging DNA Repair with Bioorthogonal Conjugation Enables Accessible and Versatile Asymmetric DNA Catalysis.

Optimizing catalysts through high-throughput screening for asymmetric catalysis is challenging due to the difficulty associated with assembling a library of catalyst analogues in a timely fashion. Here, we repurpose DNA excision repair and integrate it with bioorthogonal conjugation to construct a diverse array of DNA hybrid catalysts for highly accessible and high-throughput asymmetric DNA catalysis, enabling a dramatically expedited catalyst optimization process, superior reactivity and selectivity, as well as the first atroposelective DNA catalysis. The bioorthogonality of this conjugation strategy ensures exceptional tolerance toward diverse functional groups, thereby facilitating the facile construction of 44 DNA hybrid catalysts bearing various unprotected functional groups. This unique feature holds the potential to enable catalytic modalities in asymmetric DNA catalysis that were previously deemed unattainable.

Fungal invasion-induced accumulation of salicylic acid promotes anthocyanin biosynthesis through MdNPR1-MdTGA2.2 module in apple fruits.

In the field, necrosis area induced by pathogens is usually surrounded by a red circle in apple fruits. However, the underlying molecular mechanism of this phenomenon remains unclear. In this study, we demonstrated that accumulated salicylic acid (SA) induced by fungal infection promoted anthocyanin biosynthesis through MdNPR1-MdTGA2.2 module in apple (Malus domestica). Inoculating apple fruits with Valsa mali or Botryosphaeria dothidea induced a red circle surrounding the necrosis area, which mimicked the phenotype observed in the field. The red circle accumulated a high level of anthocyanins, which was positively correlated with SA accumulation stimulated by fungal invasion. Further analysis showed that SA promoted anthocyanin biosynthesis in a dose-dependent manner in both apple calli and fruits. We next demonstrated that MdNPR1, a master regulator of SA signaling, positively regulated anthocyanin biosynthesis in both apple and Arabidopsis. Moreover, MdNPR1 functioned as a co-activator to interact with and enhance the transactivation activity of MdTGA2.2, which could directly bind to the promoters of anthocyanin biosynthetic and regulatory genes to promote their transcription. Suppressing expression of either MdNPR1 or MdTGA2.2 inhibited coloration of apple fruits, while overexpressing either of them significantly promoted fruit coloration. Finally, we revealed that silencing either MdNPR1 or MdTGA2.2 in apple fruits repressed SA-induced fruit coloration. Therefore, our data determined that fungal-induced SA promoted anthocyanin biosynthesis through MdNPR1-MdTGA2.2 module, resulting in a red circle surrounding the necrosis area in apple fruits.

P53 upregulation by USP7-engaging molecular glues.

Molecular glues are typically small chemical molecules that act at the interface between a target protein and degradation machinery to trigger ternary complex formation. Identifying molecular glues is challenging. There is a scarcity of target-specific upregulating molecular glues, which are highly anticipated for numerous targets, including P53. P53 is degraded in proteasomes through polyubiquitination by specific E3 ligases, whereas deubiquitinases (DUBs) remove polyubiquitination conjugates to counteract these E3 ligases. Thus, small-molecular glues that enhance P53 anchoring to DUBs may stabilize P53 through deubiquitination. Here, using small-molecule microarray-based technology and unbiased screening, we identified three potential molecular glues that may tether P53 to the DUB, USP7, and elevate the P53 level. Among the molecular glues, bromocriptine (BC) is an FDA-approved drug with the most robust effects. BC was further verified to increase P53 stability via the predicted molecular glue mechanism engaging USP7. Consistent with P53 upregulation in cancer cells, BC was shown to inhibit the proliferation of cancer cells in vitro and suppress tumor growth in a xenograft model. In summary, we established a potential screening platform and identified potential molecular glues upregulating P53. Similar strategies could be applied to the identification of other types of molecular glues that may benefit drug discovery and chemical biology studies.

Herbal textual research of Belamcanda chinensis (L.) redouté and screening of quality-markers based on 'pharmacodynamics-substance'.

ETHNOPHARMACOLOGICAL RELEVANCE: Belamcanda chinensis (L.) Redouté is widely distributed in East Asia, such as China, Russia and North Korea. Belamcandae Rhizoma is the sun-dried rhizome of B. chinensis and has a long history of traditional medicinal use. It was first recorded in the Shennong's Herbal Classic, and has the effects of clearing heat and detoxifying, eliminating phlegm and benefiting the pharynx. AIM OF THE STUDY: To systematically study the source of Belamcandae Rhizoma, summarize the evolution of its medicinal properties, efficacy and the application history of its prescriptions, summarize its biological activity, phytochemistry, synthetic metabolic pathway and toxicology, and screen the Quality-Markers of Belamcandae Rhizoma according to the screening principle of traditional Chinese medicine Quality-Markers. MATERIALS AND METHODS: All information available on Belamcandae Rhizoma was collected using electronic search engines, such as Pubmed, Web of Science, CNKI, WFO (www.worldfloraonline.org), MPNS (https://mpsn.kew.org), Changchun University of Traditional Chinese Medicine Library collections, Chinese Medical Classics. RESULTS: The source of Belamcandae Rhizoma is B. chinensis of Iridaceae. It has a long history of application in China. It has the effects of clearing heat and detoxifying, eliminating phlegm and promoting pharynx. Modern pharmacological studies have shown that it has anti-inflammatory, anti-oxidation, anti-tumor and other physiological activities, and is safe and non-toxic at normal application doses. At present, tectoridin, iridin, tectorigenin, irigenin and irisflorentin are identified as the Quality-Markers of Belamcandae Rhizoma. CONCLUSIONS: As a traditional Chinese medicine, Belamcandae Rhizoma has a long history of application, and multifaceted studies have demonstrated that Belamcandae Rhizoma is a promising Chinese medicine with good application prospects. By reviewing and identifying the Quality-Markers of Belamcandae Rhizoma, this study can help to establish the evaluation procedure of it on the one hand, and identify the shortcomings research on the other hand. Currently, there are few studies on the anabolism and toxicology of it, and future studies may focus on its in vivo processes, toxicology and adverse effects.

Powerful UAV manipulation via bioinspired self-adaptive soft self-contained gripper.

Existing grippers for unmanned aerial vehicle (UAV) manipulation have persistent challenges, highlighting a need for grippers that are soft, self-adaptive, self-contained, easy to control, and lightweight. Inspired by tendril plants, we propose a class of soft grippers that are voltage driven and based on winding deformation for self-adaptive grasping. We design two types of U-shaped soft eccentric circular tube actuators (UCTAs) and propose using the liquid-gas phase-transition mechanism to actuate UCTAs. Two types of UCTAs are separately cross-arranged to construct two types of soft grippers, forming self-contained systems that can be directly driven by voltage. One gripper inspired by tendril climbers can be used for delicate grasping, and the other gripper inspired by hook climbers can be used for strong grasping. These grippers are ideal for deployment in UAVs because of their self-adaptability, ease of control, and light weight, paving the way for UAVs to achieve powerful manipulation with low positioning accuracy, no complex grasping planning, self-adaptability, and multiple environments.

Carbon slow-release and enhanced nitrogen removal performance of plant residue-based composite filler and ecological mechanisms in constructed wetland application.

Stable carbon release and coupled microbial efficacy of external carbon source solid fillers are the keys to enhanced nitrogen removal in constructed wetlands. The constructed wetland plant residue Acorus calamus was cross-linked with poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) to create composite solid carbon source fillers (Ac-BDPs). The study demonstrated the slow release of carbon sources from Ac-BDPs with 35.27 mg/g under an average release rate of 0.88 mg/(g·d). Excellent denitrification was also observed in constructed wetlands with Ac-BDPs. Moreover, the average removal rate of nitrate nitrogen (NO3--N) was increased by 1.94 and 3.85 times of the blank groups under initial NO3--N inputs of 5 and 15 mg/L, respectively. Furthermore, the relatively high abundances of nap, narG, nirKS, norB, qnorZ and nosZ guaranteed efficient denitrification performance in constructed wetlands with Ac-BDPs. The study introduced a reliable technique for biological nitrogen removal by using composite carbon source fillers in constructed wetlands.

Dual Redox Reaction Sites for Pseudocapacitance Based on Ti and -P Functional Groups of Ti3C2PBrx MXene.

MXenes have extensive applications due to their different properties determined by intrinsic structures and various functional groups. Exploring different functional groups of MXenes leads to improved performance or potential applications. In this work, we prepared new Ti3C2PBrx (x=0.4-0.6) MXene with phosphorus functional groups (-P) through a two-step gas-phase reaction. The acquisition of -P is achieved by replacing bromine functional groups (-Br) of Ti3C2Br2 in the phosphorus vapor. After -Br is replaced with -P, Ti3C2PBrx MXene shows an improved areal capacitance (360 mF cm-2) at 20 mV s-1 compared with Ti3C2Br2 MXene (102 mF cm-2). At a current density of 5 mA cm-2 after 10000 cycles, the capacitance retention of Ti3C2PBrx MXene has not decreased. The pseudocapacitive enhancement mechanism has been discovered based on the dual redox sites of the functional groups -P and Ti.

Antibiotics influence the risk of anti-drug antibody formation during anti-TNF therapy in Chinese inflammatory bowel disease patients.

Aims: The formation of anti-drug antibodies (ADAs) during anti-tumor necrosis factor (anti-TNF) therapy is reported to lead to reducing serum drug levels, which may bring about a loss of response to treatment. Previous research has suggested an association between specific antibiotic classes and ADA formation during anti-TNF therapy. However, there are few studies specifically examining this association in Chinese inflammatory bowel disease (IBD) patients. Therefore, our study aimed to evaluate the possible effect of antibiotic use on ADA formation to anti-TNF therapy in Chinese patients with IBD. Methods: A total of 166 patients with IBD, including 149 with Crohn's disease (CD) and 17 with ulcerative colitis (UC), were included in this retrospective analysis. These patients were initially treated with anti-TNF therapy (infliximab or adalimumab) after January 2018 and reviewed with available ADA levels before October 2023. After univariable analysis of all the variables, a multivariate Cox proportional hazards model was used to assess the association between antibiotic use and ADA development. Results: Among 166 IBD patients treated with infliximab (108/166, 65.1%) or adalimumab (58/166, 34.9%), 31 patients (18.7%) were measured as positive ADA levels. Cox proportional hazard model demonstrated an increased risk of ADA formation in IBD patients who used ß-lactam-ß-lactamase inhibitor combinations (BL-BLIs) (HR = 5.143, 95%CI 1.136-23.270, p = 0.033), or nitroimidazoles (HR = 4.635, 95%CI 1.641-13.089, p = 0.004) during 12 months before the ADA test. On the contrary, a reduced risk was noted in patients treated with fluoroquinolones (HR = 0.258, 95% CI 0.072-0.924, p = 0.037). Moreover, the median serum infliximab or adalimumab concentration in patients with positive ADA levels was significantly lower than that in patients with negative ADA levels (infliximab: 0.30 vs. 1.85 µg/mL, p < 0.0001; adalimumab: 0.45 vs. 7.55 µg/mL, p = 0.0121). Conclusion: ADA development is associated with various antibiotic classes. BL-BLIs and nitroimidazoles might increase the risk of ADA formation during anti-TNF therapy in Chinese IBD patients, while the treatment with fluoroquinolones could probably reduce such risk. There were certain limitations in the retrospective analysis of the study, therefore, the results are just for reference, and other studies are needed to further confirm our findings.

π-π Stacking at the Perovskite/C60 Interface Enables High-Efficiency Wide-Bandgap Perovskite Solar Cells.

Interface passivation is a key method for improving the efficiency of perovskite solar cells, and 2D/3D perovskite heterojunction is the mainstream passivation strategy. However, the passivation layer also produces a new interface between 2D perovskite and fullerene (C60), and the properties of this interface have received little attention before. Here, the underlying properties of the 2D perovskite/C60 interface by taking the 2D TEA2PbX4 (TEA = C6H10NS; X = I, Br, Cl) passivator as an example are systematically expounded. It is found that the 2D perovskite preferentially exhibits (002) orientation with the outermost surface featuring an oriented arrangement of TEACl, where the thiophene groups face outward. The outward thiophene groups further form a strong π-π stacking system with C60 molecule, strengthening the interaction force with C60 and facilitating the creation of a superior interface. Based on the vacuum-assisted blade coating, wide-bandgap (WBG, 1.77 eV) perovskite solar cells achieved impressive records of 19.28% (0.09 cm2) and 18.08% (1.0 cm2) inefficiency, respectively. This research not only provides a new understanding of interface processing for future perovskite solar cells but also lays a solid foundation for realizing efficient large-area devices.

Tuning Electrocatalytic Activities of Dealloyed Nanoporous Catalysts by Macroscopic Strain Engineering.

It is technically challenging to quantitatively apply strains to tune catalysis because most heterogeneous catalysts are nanoparticles, and lattice strains can only be applied indirectly via core-shell structures or crystal defects. Herein, we report quantitative relations between macroscopic strains and hydrogen evolution reaction (HER) activities of dealloyed nanoporous gold (NPG) by directly applying macroscopic strains upon bulk NPG. It was found that macroscopic compressive strains lead to a decrease, while macroscopic tensile strains improve the HER activity of NPG, which is in line with the d-band center model. The overpotential and onset potential of HER display approximately a linear relation with applied macroscopic strains, revealing an ∼2.9 meV decrease of the binding energy per 0.1% lattice strains from compressive to tensile. The methodology with the high strain sensitivity of electrocatalysis, developed in this study, paves a new way to investigate the insights of strain-dependent electrocatalysis with high precision.

Identification of Hsp20 gene family in Malus domestica and functional characterization of Hsp20 class I gene MdHsp18.2b.

Heat shock protein 20 (Hsp20) is a small molecule heat shock protein that plays an important role in plant growth, development, and stress resistance. Little is known about the function of Hsp20 family genes in apple (Malus domestica). Here, we performed a genome-wide analysis of the apple Hsp20 gene family, and a total of 49 Hsp20s genes were identified from the apple genome. Phylogenetic analysis revealed that the 49 genes were divided into 11 subfamilies, and MdHsp18.2b, a member located in the CI branch, was selected as a representative member for functional characterization. Treatment with NaCl and Botryosphaeria dothidea (B. dothidea), the causal agent of apple ring rot disease, significantly induced MdHsp18.2b transcription level. Further analysis revealed that overexpressing MdHsp18.2b reduced the resistance to salt stress but enhanced the resistance to B. dothidea infection in apple calli. Moreover, MdHsp18.2b positively regulated anthocyanin accumulation in apple calli. Physiology assays revealed that MdHsp18.2b promoted H2O2 production, even in the absence of stress factors, which might contribute to its functions in response to NaCl and B. dothidea infection. Hsps usually function as homo- or heterooligomers, and we found that MdHsp18.2b could form a heterodimer with MdHsp17.9a and MdHsp17.5, two members from the same branch with MdHsp18.2b in the phylogenetic tree. Therefore, we identified 49 Hsp20s genes from the apple genome and found that MdHsp18.2b was involved in regulating plant resistance to salt stress and B. dothidea infection, as well as in regulating anthocyanin accumulation in apple calli.

Clinicopathologic characteristics of HPV-associated head and neck squamous cell carcinoma in Southern China: long-term retrospective study of 400 cases.

Background: Human papillomavirus (HPV)-associated head and neck squamous cell carcinoma (HNSCC) is an evolving and growing disease, especially in developing countries. However, the clinical characteristics of HPV-associated HNSCC in regard to HPV infection rates, patient features, and prognosis are under-reported in the Asian population. Methods: In this study, we retrospectively enrolled a 400-case cohort of HNSCC with p16 immunochemistry and analyzed with long-term follow-up. We investigate the current HPV prevalence of HNSCC, unique HPV-associated patient clinical characteristics, and patient prognosis in the southern China population. Results: HPV infection exhibited a 15% prevalence in all HNSCC cases, notably higher in oropharyngeal cases (30.7%), followed by oral cavity (11.8%), laryngeal (10.1%), and hypopharyngeal (2.5%). HPV status, gender, old age, and location of tumor were significantly associated with the patient's survival. Tonsil invasion was found more frequent in HPV-positive oropharyngeal HNSCC than in HPV-negative cases. HPV-associated HNSCC patients tend to possess stronger tobacco and alcohol habits, which were correlated to poor survival. HPV status's correlation with gender, age, and anatomical location is associated intricately with patient survival. The secondary primary tumor rate was found higher within the HPV-negative group, compared to the HPV-positive group (9.12% versus 1.67%). Conclusion: Our study provided a current picture of HPV-associated HNSCC in the southern China population and elaborated the understanding of key factors that correlate to HNSCC prognosis. Our findings indicated a strong susceptibility of HPV-associated oropharyngeal HNSCC in the tonsil and the difference in secondary primary tumor rates associated with HPV status.

HPV in head and neck cancer In this study, we retrospectively enrolled a 400-case cohort of HNSCC with p16 immunochemistry and analyzed with long-term follow-up. We investigate the current HPV prevalence of HNSCC, unique HPV-associated patient characteristics, along with patient prognosis in southern China population. Our findings indicated a strong susceptibility of HPV-associated oropharyngeal HNSCC in tonsil and difference of secondary primary tumor associated with HPV status. Our study provided a current picture of HPV-associated HNSCC in southern China population and elaborated the understanding of key factors that correlate to HNSCC prognosis.

A comprehensive biomechanical evaluation of length and diameter of dental implants using finite element analyses: A systematic review.

Background: With a wide range of dental implants currently used in clinical scenarios, evidence is limited on selecting the type of dental implant best suited to endure the biting force of missing teeth. Finite Element Analysis (FEA) is a reliable technology which has been applied in dental implantology to study the distribution of biomechanical stress within the bone and dental implants. Purpose: This study aimed to perform a systematic review to evaluate the biomechanical properties of dental implants regarding their length and diameter using FEA. Material and methods: A comprehensive search was performed in PubMed/MEDLINE, Scopus, Embase, and Web of Science for peer-reviewed studies published in English from October 2003 to October 2023. Data were organized based on the following topics: area, bone layers, type of bone, design of implant, implant material, diameter of implant, length of implant, stress units, type of loading, experimental validation, convergence analysis, boundary conditions, parts of Finite Element Model, stability factor, study variables, and main findings. The present study is registered in PROSPERO under number CRD42022382211. Results: The query yielded 852 results, of which 40 studies met the inclusion criteria and were selected in this study. The diameter and length of the dental implants were found to significantly influence the stress distribution in cortical and cancellous bone, respectively. Implant diameter was identified as a key factor in minimizing peri-implant stress concentrations and avoiding crestal overloading. In terms of stress reduction, implant length becomes increasingly important as bone density decreases. Conclusions: The diameter of dental implants is more important than implant length in reducing bone stress distribution and improving implant stability under both static and immediate loading conditions. Short implants with a larger diameter were found to generate lower stresses than longer implants with a smaller diameter. Other potential influential design factors including implant system, cantilever length, thread features, and abutment collar height should also be considered in future implant design as they may also have an impact on implant performance.

Four birds with one stone: Aggregation-induced emission-type zeolitic imidazolate framework-8 based bionic nanoreactor for portable detection of olaquindox in environmental water and swine urine by smartphone.

The abuse of olaquindox (OLA) as both an antimicrobial agent and a growth promoter poses significant threats to the environment and human health. While nanoreactors have proven effective in hazard detection, their widespread adoption has been hindered by tedious chemical processes and limited functionality. In this study, we introduce a novel green self-assembly strategy utilizing invertase, horseradish peroxidase, antibodies, and gold nanoclusters to form an aggregation-induced emission-type zeolitic imidazolate framework-8 nanoreactor. The results demonstrate that the lateral flow immunoassay not only allows for qualitative naked eye detection but also enables optical analysis through the fluorescence generated by aggregated gold nanoclusters and enzyme-catalyzed enhancement of visible colorimetric signals. To accommodate more detection scenarios, the photothermal effects and redox reactions of the nanoreactor can fulfill the requirements of thermal sensing and electrochemical analysis for smartphone applications. Remarkably, the proposed approach achieves a detection limit 17 times lower than conventional methods. Besides, the maximum linear range spans from 0.25 to 5 µg/L with high specificity, and the recovery is 85.2-112.9% in environmental water and swine urine. The application of this high-performance nanoreactor opens up avenues for the construction of multifunctional biosensors with great potential in monitoring hazardous materials.