ABSTRACT
Polymeric materials play a vital role in high-voltage insulation, but their insulating properties can deteriorate over time, leading to insulation failures. The presence of voids resulting from manufacturing defects or external stresses can create a highly divergent field, further contributing to this issue. However, certain polymers, such as polyurethane (PU), possess self-healing properties that enable them to repair these voids and restore a uniform electric field distribution, thereby ensuring the reliability of the insulation. Surprisingly, the potential of PU as an insulating material in high-voltage applications remains unexplored. However, the self-healing capability of PU decreases with an increase in the hardness of the material. Therefore, in this study, the dielectric breakdown properties of PU with different levels of hardness, rated on the Shore scale as 40° (soft), 70° (medium), and 90° (hard), were investigated. The AC and DC dielectric breakdown characteristics of these PU variants and dielectric spectra were examined. Additionally, the study explores the relationship between the dielectric properties and the hardness of the material. Our findings revealed that the dielectric breakdown strength of PU increases as the material's hardness is increased under both AC and DC electric stress. However, this may come at the cost of reduced self-healing capabilities of PU. Therefore, there is a need to balance the hardness of the material with its ability to recover from breakdown events. The findings from this study can be useful for researchers and engineers, as they offer valuable insights into the dielectric properties of PU at various hardness levels.
ABSTRACT
Radioactive materials are potentially harmful due to the radiation emitted by radionuclides and the risk of radioactive contamination. Despite strict compliance with safety protocols, contamination with radioactive materials is still possible. This paper describes innovative and inexpensive formulations that can be employed as 'eco-friendly' tools for the safe decontamination of radiopharmaceuticals spills or other accidental radioactive contamination of the surfaces arising from general-purpose radioisotope handling facilities (radiopharmaceutical laboratories, hospitals, research laboratories, etc.). These new peelable nanocomposite coatings are obtained from water-based, non-toxic, polymeric blends containing readily biodegradable components, which do not damage the substrate on which they are applied while also displaying efficient binding and removal of the contaminants from the targeted surfaces. The properties of the film-forming decontamination solutions were assessed using rheological measurements and evaporation rate tests, while the resulting strippable coatings were subjected to Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and tensile tests. Radionuclide decontamination tests were performed on various types of surfaces encountered in radioisotope workspaces (concrete, painted metal, ceramic tiles, linoleum, epoxy resin cover). Thus, it was shown that they possess remarkable properties (thermal and mechanical resistance which permits facile removal through peeling) and that their capacity to entrap and remove beta and alpha particle emitters depends on the constituents of the decontaminating formulation, but more importantly, on the type of surface tested. Except for the cement surface (which was particularly porous), at which the decontamination level ranged between approximately 44% and 89%, for all the other investigated surfaces, a decontamination efficiency ranging from 80.6% to 96.5% was achieved.
ABSTRACT
The straightforward metathesis of 1-lithio-2-tbutyl-1,2-dihydropyridine using metal tert-butoxide (Na/K) has resulted in the first preparation and isolation of a series of heavier alkali metal dihydropyridines. By employing donors, TMEDA, PMDETA and THF, five new metallodihydropyridine compounds were isolated and fully characterised. Three distinct structural motifs have been observed; a dimer, a dimer of dimers and a novel polymeric dihydropyridylpotassium compound, and the influence of cation π-interactions therein has been discussed. Thermal volatility analysis has shown that these complexes have the potential to be used as simple isolable sodium or potassium hydride surrogates, which is confirmed in test reactions with benzophenone.
ABSTRACT
Generally considered kinetic intermediates in addition reactions of alkyllithiums to pyridine, 1-lithio-2-alkyl-1,2-dihydropyridines have been rarely isolated or characterized. This study develops their "isolated" chemistry. By a unique stoichiometric (that is, 1:1, alkyllithium/pyridine ratios) synthetic approach using tridentate donors we show it is possible to stabilize and hence crystallize monomeric complexes where alkyl is tert-butyl. Theoretical calculations probing the donor-free parent tert-butyl species reveal 12 energetically similar stereoisomers in two distinct cyclotrimeric (LiN)3 conformations. NMR spectroscopy studies (including DOSY spectra) and thermal volatility analysis compare new sec-butyl and iso-butyl isomers showing the former is a hexane soluble efficient hydrolithiation agent converting benzophenone to lithium diphenylmethoxide. Emphasizing the criticalness of stoichiometry, reaction of nBuLi/Me6 TREN with two equivalents of pyridine results in non-alkylated 1-lithio-1,4-dihydropyridineâ Me6 TREN and 2-n-butylpyridine, implying mechanistically the kinetic 1,2-n-butyl intermediate hydrolithiates the second pyridine.
ABSTRACT
1-Lithio-2-butyl-1,2-dihydropyridines, typically formed as intermediates in the nucleophilic substitution (addition/elimination) of pyridine with (n- or t-)butyl lithium, have been isolated and comprehensively characterized. The linear substituted isomer is polymeric while the branched substituted isomer is a cyclotrimer. The lower oligomerization of the latter complex confers exceptional hexane solubility making it an excellent lithium hydride source in non-polar, aliphatic media. A Me6TREN stabilized monomer of the t-butyl complex represents the first 1,2-dihydropyridyllithium complex to be characterized crystallographically.
ABSTRACT
A general thermolysis reaction for the transformation of Group 1 TMP compounds (LiTMP, NaTMP, KTMP) to 1-aza-allylic TTHP derivatives is reported. TMEDA accelerates the reaction and produces the crystalline complexes [(TMEDA)LiTTHP] and [(TMEDA·NaTTHP)2]. Methane elimination during the transformational process was confirmed via TVA coupled to MS.
Subject(s)
Amides/chemistry , Metals, Alkali/chemistry , Piperidines/chemistry , Coordination Complexes/chemistry , Crystallography, X-Ray , Methane/chemistry , Molecular Conformation , Salts/chemistryABSTRACT
OBJECTIVES: To study the effectiveness of partially degraded polyethylene glycol 6000 (PEG) as a precipitant for macroprolactin. DESIGN AND METHODS: PEG was heated to 63 degrees C in air for up to 20 days and its effectiveness assessed as a precipitant for sera containing normal prolactin or macroprolactin. Decomposition was studied chemically and with NMR spectroscopy. RESULTS: Thermal degradation was similar to what had occurred over several years of natural degradation. Initially PEG degraded 2-5 days caused excess precipitation of monomeric prolactin (false-positive macroprolactinemia). Samples degraded 18-20 days failed to precipitate macroprolactin, giving false negative results. Two 1H NMR peaks at 4-4.5 ppm were not detectable in undegraded PEG but were after 1 day. Their relative integral increased to 20 days. CONCLUSIONS: Aging of PEG can be accelerated by heating. The suitability of PEG for use in macroprolactin assays can be assessed by the absence of peaks at 4-4.5 ppm by 1H NMR.
Subject(s)
Polyethylene Glycols/chemistry , Prolactin/isolation & purification , Chemical Precipitation , Hot Temperature , Humans , Magnetic Resonance Spectroscopy , Prolactin/bloodABSTRACT
Reported here is the synthesis and subsequent characterization of the physical and chemical properties of novel polysiloxane elastomers modified with a series of polyhedraloligomericsilsequioxane (POSS) molecular silicas. The physical properties of the formulated nanocomposite systems have been characterized with a combination of dynamic mechanical analysis (DMA), broadband dielectric spectroscopy (BDS) and confocal Raman microscopy. The results of the physical property characterization demonstrate that the incorporation of low levels (1-4% by wt.) of POSS particles into the polysiloxane network leads to significant improvements in the mechanical properties of the elastomer and significantly alters the motional chain dynamics of the system as a whole. The results of studies performed to assess the long-term stability of these novel nanocomposite systems have demonstrated that POSS physical property modifiers can significantly alter the thermal stability of polysiloxane elastomers. Physically dispersed POSS has also been shown in some cases to be both mobile and disruptive within the polysiloxane networks, agglomerating into domains on a micron scale and migrating to the surface of the elastomers. This work demonstrates both the potential of POSS nanoparticles as physical property modifiers and describes the effects of POSS on the physical and chemical stability of polysiloxane systems.
ABSTRACT
Colloidal lithography and embossing master are new techniques of producing nanotopography, which have been recently applied to improve tissue response to biomaterials by modifying the surface topography on a nano-scale dimension. A natural polyester (Biopol), 8% 3-hydroxyvalerate-component (D400G) and a conventional biodegradable polycaprolactone (PCL) were studied, both nanostructured and native forms, in vitro and in vivo. Nanopits (100-nm deep, 120-nm diameter) on the D400G surface were produced by the embossing master technique (Nano-D400G), while nanocylinders (160-nm height, 100-nm diameter) on the PCL surface were made by the colloidal lithography technique (Nano-PCL). L929 fibroblasts were seeded on polyesters, and cell proliferation, cytotoxic effect, synthetic and cytokine production were assessed after 72 h and 7 days. Then, under general anesthesia, 3 Sprague-Dawley rats received dorsal subcutaneous implants of nanostructured and native polyesters. At 1, 4 and 12 weeks the animals were pharmacologically euthanized and implants with surrounding tissue studied histologically and histomorphometrically. In vitro results showed significant differences between D400G and PCL in Interleukin-6 production at 72 h. At 7 days, significant (P < 0.05) differences were found in Interleukin-1beta and tumor necrosis factor-alpha release for Nano-PCL when compared to Nano-D400G, and for PCL in comparison with D400G. In vivo results indicated that Nano-D400G implants produced a greater extent of inflammatory tissue than Nano-PCL at 4 weeks. The highest vascular densities were observed for Nano-PCL at 4 and 12 weeks. Chemical and topographical factors seem to be responsible for the different behaviour, and from the obtained results a prevalence of chemistry on in vitro data and nanotopography on soft tissue response in vivo are hypothesized, although more detailed investigations are necessary in this field.