Farmland's silent threat: Comprehensive multimedia assessment of micropollutants through non-targeted screening and targeted analysis in agricultural systems.

Intricate agricultural ecosystems markedly influence the dynamics of organic micropollutants, posing substantial threats to aquatic organisms and human health. This study examined the occurrence and distribution of organic micropollutants across soils, ditch sediment, and water within highly intensified farming setups. Using a non-targeted screening method, we identified 405 micropollutants across 10 sampling sites, which mainly included pesticides, pharmaceuticals, industrial chemicals, and personal care products. This inventory comprised emerging contaminants, banned pesticides, and controlled pharmaceuticals that had eluded detection via conventional monitoring. Targeted analysis showed concentrations of 3.99-1021 ng/g in soils, 4.67-2488 ng/g in sediment, and 12.5-9373 ng/L in water, respectively, for Σ40pesticides, Σ8pharmaceuticals, and Σ3industrial chemicals, indicating notable spatial variability. Soil organic carbon content and wastewater discharge were likely responsible for their spatial distribution. Principal component analysis and correlation analysis revealed a potential transfer of micropollutants across the three media. Particularly, a heightened correlation was decerned between soil and sediment micropollutant levels, highlighting the role of sorption processes. Risk quotients surpassed the threshold of 1 for 13-23 micropollutants across the three media, indicating high environmental risks. This study highlights the importance of employing non-targeted and targeted screening in assessing and managing environmental risks associated with micropollutants.

Engineering Escherichia coli to Efficiently Produce Colanic Acid with Low Molecular Mass and Viscosity.

Colanic acid (CA) is exopolysaccharide that presents growing potential in the food and healthcare industry as a versatile polymer. Previously, we have constructed the Escherichia coli strain WWM16 which can efficiently produce CA. In this study, WWM16 has been further engineered to produce a higher yield of CA with low molecular mass and viscosity. The gene mcbR encoding a transcriptional factor, and the genes opgD, opgG, and opgH related to the biosynthesis of osmoregulated periplasmic glucans were deleted in E. coli WWM16, and the resulting strain WWM166 produced 18.1 g/L CA. The expression level of wcaD encoding the polymerase in WWM166 was downregulated using CRISPRi. As a result, the strain WWM166/pWpD1 could produce 49.9 g/L CA with lower molecular mass. CA products were purified from both WWM166 and WWM166/pWpD1, and their molecular mass, viscosity, fluidity, hygroscopicity, and antioxidant activity were determined and compared. These findings demonstrate the potential application of CA with different molecular masses to prolong life and protect skin in the food and cosmetic industries.

An investigation of a strengthening polysaccharide interfacial membrane strategy utilizing an anionic polysaccharide-alkaline ligand interfacial assembly for all-liquid printing.

The applications of polysaccharides as emulsifiers are limited due to the lack of hydrophobicity. However, traditional hydrophobic modification methods used for polysaccharides are complicated and involve significant mechanical and thermal losses. In this study, soy hull polysaccharide (SHP) and terminally aminopropylated polydimethylsiloxane (NPN) were selected to investigate the feasibility of a simple and green interfacial membrane strengthening strategy based on the interfacial polymerization of anionic polysaccharides and fat-soluble alkaline ligands. Our results show that deprotonated SHP and protonated NPN can be complexed at the water/oil (W/O) interface, reduce interfacial tension, and form a strong membrane structure. Moreover, they can quickly form a membrane at the W/O interface upon the moment of contact to produce stable all-liquid printing products with complex patterns. However, the molecular weight of NPN affects the complexation reaction. Consequently, this study has long-term implications to expanding the areas of application for anionic polysaccharides.

Strong, tough, conductive and transparent nanocellulose hydrogel based on Ca2+-induced cross-linked double-networks and its adsorption of methylene blue dye.

A novel multi-performance SHNC/SA/CaCl2 hydrogel with multi-performance was prepared via ultra-low-temperature freeze-thaw cycling and Ca2+ cross-linking for the removal of methylene blue (MB) from industrial wastewater. Various methods were used to characterize the structure and properties of hydrogel, and the internal structure of hydrogel showed a three-dimensional network with hydrogen and ester bonds. The SHNC/SA/CaCl2-15 hydrogel exhibited the highest tensile properties (elongation = 800 %), viscoelasticity (90 kPa), compressive strength (0.45 MPa), tensile strength (0.47 MPa) and ionic conductivity (4.34 S/cm). The maximum adsorption capacity of 2 g SHNC/SA/CaCl2-15 hydrogel was 608.49 mg/g at 40 °C, pH = 8 and adsorption 24 h. The adsorption process of hydrogel toward MB was more consistent with the second-order kinetic model and Langmuir isothermal adsorption model. According to the Langmuir isotherm model, the maximum monolayer adsorption capacity of SHNC/SA/CaCl2-15 hydrogel toward MB can reach 613.88 mg/g. Finally, it was found that the removal rate of SHNC/SA/CaCl2-15 hydrogel for MB was still as high as 90 % after five cycles of the adsorption-desorption test, and it could be reused. The hydrogel can be used as cheap and reusable adsorption material for cationic dyes. Our study provides a new perspective for the development of multifunctional cellulose hydrogel adsorbent materials.

Procalcitonin and C-reactive protein as early predictors in patients at high risk of colorectal anastomotic leakage.

OBJECTIVE: To assess the diagnostic value of C-reactive protein (CRP) and procalcitonin (PCT) for anastomotic leakage (AL) following colorectal surgery. METHODS: We retrospectively analyzed data for patients who underwent colorectal surgery at our hospital between November 2019 and December 2023. CRP and PCT were measured postoperatively to compare patients with/without AL, and changes were compared between low- and high-risk groups. Receiver operating characteristic (ROC) curve analysis was used to assess the diagnostic accuracy of CRP and PCT to identify AL in high-risk patients. RESULTS: Mean CRP was 142.53 mg/L and 189.57 mg/L in the low- and high-risk groups, respectively, on postoperative day (POD)3. On POD2, mean PCT was 2.75 ng/mL and 8.16 ng/mL in low- and high-risk patients, respectively; values on POD3 were 3.53 ng/mL and 14.86 ng/mL, respectively. The areas under the curve (AUC) for CRP and PCT on POD3 were 0.71 and 0.78, respectively (CRP cut-off: 235.64 mg/L; sensitivity: 96%; specificity: 89.42% vs PCT cut-off: 3.94 ng/mL; sensitivity: 86%; specificity: 93.56%; AUC: 0.78). The AUC, sensitivity, and specificity for the combined diagnostic ability of CRP and PCT on POD3 were 0.92, 90%, and 100%, respectively (cut-off: 0.44). CONCLUSIONS: Combining PCT and CRP on POD3 enhances the diagnostic accuracy for AL.

Encapsulation of luteolin by self-assembled Rha/SSPS/SPI nano complexes: Characterization, stability, and gastrointestinal digestion in vitro.

Luteolin has anti-inflammatory, antioxidant, and anti-tumor functions, but its poor water solubility and stability limit its applications in foods as a functional component. In this study, the nanocomposites loading luteolin (Lut) with soybean protein isolate (SPI), soluble soybean polysaccharide (SSPS) and/or rhamnolipid (Rha) were prepared by layer-by-layer shelf assembly method, and their properties were also evaluated. The results showed that Rha/SPI/Lut had the smallest particle size (206.24 nm) and highest loading ratio (8.03 µg/mg) while Rha/SSPS/SPI/Lut had the highest encapsulation efficiency (82.45 %). Rha interacted with SPI through hydrophobic interactions as the main driving force, while SSPS attached to SPI with only hydrogen bonding. Furthermore, the synergistic effect between Rha and SSPS was observed in Rha/SSPS/SPI/Lut complex, in consequence, it had the best thermal and storage stability, and the slowest release in gastrointestinal digestion. Thus, this approach provided an alternative way for the application of luteolin in functional foods.

Midbrain glutamatergic circuit mechanism of resilience to socially transferred allodynia in male mice.

The potential brain mechanism underlying resilience to socially transferred allodynia remains unknown. Here, we utilize a well-established socially transferred allodynia paradigm to segregate male mice into pain-susceptible and pain-resilient subgroups. Brain screening results show that ventral tegmental area glutamatergic neurons are selectively activated in pain-resilient mice as compared to control and pain-susceptible mice. Chemogenetic manipulations demonstrate that activation and inhibition of ventral tegmental area glutamatergic neurons bi-directionally regulate resilience to socially transferred allodynia. Moreover, ventral tegmental area glutamatergic neurons that project specifically to the nucleus accumbens shell and lateral habenula regulate the development and maintenance of the pain-resilient phenotype, respectively. Together, we establish an approach to explore individual variations in pain response and identify ventral tegmental area glutamatergic neurons and related downstream circuits as critical targets for resilience to socially transferred allodynia and the development of conceptually innovative analgesics.

Preparation and Characterization of Prickly Ash Peel Oleoresin Microcapsules and Flavor Retention Analysis.

Prickly ash peel oleoresin (PPO) is a highly concentrated oil of Prickly ash essential oil and has a stronger aroma. However, its low water solubility, high volatility, difficulty in transport and storage, and decomposition by light, heat, and oxygen limit its wider application. To solve this problem, this study used freeze-drying or spray-drying, with soybean protein isolate (SPI) or gum Arabic (GA), combined with aqueous maltodextrin (MD) as the encapsulating agents to prepare four types of PPO microcapsules (POMs). Spray-dried microcapsules with GA as the encapsulating agent achieved a high encapsulation efficiency (EE) of 92.31 ± 0.31%, improved the thermal stability of the PPO, and had spherical morphology. (Headspace solid-phase microextraction/gas chromatography-mass spectrometry) HS-SPME/GC-MS detected 41 volatile compounds in PPO; of these, linalool, ß-myrcene, sabinene, and D-limonene were identified as key flavor components. Principal component analysis (PCA) effectively distinguished the significant differences in flavor between PPO, spray-dried SPI/MD microcapsules (SS), and spray-dried GA/MD microcapsules (SG). During 15 days of air-exposure, the loss of flavor from SG (54.62 ± 0.54%) was significantly lower than PPO (79.45 ± 1.45%) and SS (57.55 ± 0.36%). During the air-exposure period, SG consistently had the highest antioxidant capacity, making it desirable for PPO packaging, and expanding its potential applications within the food industry.

Endodontic Treatment of a Dilacerated Maxillary Second Premolar With a Severely Curved Root Canal: A Case Report and Literature Review.

Dilaceration is a developmental anomaly characterized by a sharp change in the axial inclination between the crown and the root of a tooth. Severe root curvature in a dilacerated tooth can greatly complicate root canal treatment. This case report details the successful endodontic treatment of a dilacerated maxillary second premolar with significant root curvature. It highlights the importance of a thorough understanding of root canal anatomy and demonstrates the effectiveness of using pre-curved hand files along with heat-treated nickel-titanium rotary instruments in navigating complex root structures to achieve successful treatment outcomes.

Antimicrobial efficacy of DJK-5 peptide in combination with EDTA against biofilms in dentinal tubules: Primary irrigation, recovery and re-irrigation.

AIM: To investigate the dynamic recovery of biofilms within dentinal tubules after primary irrigation with different protocols, and to evaluate the efficacy of various re-irrigation protocols on recovered biofilm, considering factors such as smear layer, nutrient conditions, and primary irrigants. METHODOLOGY: A total of 416 mono or multi-species biofilms samples were prepared from human teeth and incubated for 3 weeks. After inducing a smear layer on half of the samples, all specimens were irrigated with one of the following irrigant sequences: (1) 6% NaOCl +17% EDTA, (2) 6% NaOCl +8.5% EDTA, (3) 6% NaOCl and (8.5% EDTA +10 µg/mL DJK-5 antimicrobial peptide), or (4) sterile water. Thirty-two samples were used to assess immediate effect, whilst the rest were re-incubated to assess biofilms recovery. Nutrient conditions were defined based on whether culture media were changed (nutrient-rich) or not (nutrient-poor) during re-incubation. After 16 weeks, recovered biofilms underwent re-irrigation using four additional protocols, with or without DJK-5 peptide, based on primary irrigants. Confocal laser scanning microscopy was employed to evaluate immediate irrigant effects, biofilms recovery intervals (1, 3, 5, 8, 12, and 16 weeks after primary irrigation), and re-irrigation effects at the 16-week. Statistical analysis included one-way anova and two-way mixed anova tests. RESULTS: The DJK-5 peptide irrigation protocols demonstrated the highest killing rates during primary irrigation and resulted in a longer biofilms recovery time of 16 weeks compared to non-peptide protocols (p < .001). Both primary irrigation type and smear layer presence significantly influenced biofilms recovery (p < .001). In the absence of smear layer, re-irrigation efficacy didn't significantly differ from primary irrigation, regardless of primary irrigation type or nutrient conditions. However, with a smear layer present, re-irrigation led to significantly higher proportion of dead bacteria compared to primary irrigation (p < .05). Inclusion of the DJK-5 peptide into the re-irrigation protocol displayed superior killing rate compared to other protocols (p < .001). CONCLUSIONS: Biofilms exhibited susceptibility to both peptide and non-peptide protocols during re-irrigation, irrespective of nutrient conditions or primary irrigation protocols. The DJK-5 peptide irrigation protocols consistently displayed superior effectiveness compared to non-peptide protocols.

Endodontic Treatment of a Mandibular Second Molar Featuring Vertucci Type V Configuration in the Distal Root: A Case Report.

Successful root canal treatment relies primarily on thorough shaping, cleaning, and filling of the entire root canal system. Neglecting even a single canal can significantly raise the risk of post-treatment apical periodontitis. While the distal root of mandibular second molars typically has one canal, they can also present with anatomical variations, including the presence of a Vertucci Type V configuration. This article discusses a case in which a Vertucci Type V configuration in a mandibular second molar was effectively identified and treated.

One-Pot Two-Stage Biocatalytic Cascade to Produce l-Phosphinothricin by Two Enantioselective Complementary Aminotransferases at High Substrate Loading via a Deracemization Process.

The bioderacemization of racemic phosphinothricin (D, L-PPT) is a promising route for the synthesis of l-phosphinothricin (L-PPT). However, the low activity and tolerance of wild-type enzymes restrict their industrial applications. Two stereocomplementary aminotransferases with high activity and substrate tolerance were identified in a metagenomic library, and a one-pot, two-stage artificial cascade biocatalytic system was developed to produce L-PPT through kinetic resolution and asymmetric amination. We observed that 500 mM D, L-PPT (100 g/L) could be converted into L-PPT with 94% final conversion and >99.9% enantiomeric excess (e.e.) within 24 h, with only 0.02 eq amino acceptor pyruvate and 1.2 eq amino donor l-aspartate required. The process could be scaled up to 10 L under sufficient oxygen and stirring. The superior catalytic performance of this system provides an eco-friendly and sustainable approach to the industrial deracemization of D, L-PPT to L-PPT.

Enhancing Lactobacillus plantarum delivery: Impact of gluconolactone concentration on high-internal-phase emulsion gels and gastrointestinal viability.

In this study, the impact of Gluconolactone (GDL) concentration on the formation of high-internal-phase emulsion gels (HIPEGs) and the gastrointestinal digestive viability of Lactobacillus plantarum encapsulated within these HIPEGs were demonstrated. Increasing GDL concentrations led to cross-linking of particles at the oil-water interface, thereby stabilizing smaller oil droplets. The addition of GDL to HIPEs results in a significant increase in the secondary structure of SPI, specifically in ß-sheet and ß-turn formations, accompanied by a reduction in α-helix percentage. This alteration enhanced the binding effect of protein on water, leading to changes in intermolecular force. Notably, HIPEGs containing 3.0% GDL demonstrated superior encapsulation efficiency and delivery efficiency, reaching 99.0% and 84.5%, respectively. After 14 d of continuous zebrafishs feeding, the intestinal viable cells count of Lactobacillus plantarum reached 1.18 × 107 CFU/mL. This finding supports the potential use of HIPEGs as a probiotic delivery carrier, effectively enhancing the intestinal colonization rate.

Influence of ear tags on the results of body composition analysis in mice.

BACKGROUND: The aim of this study was to investigate the influence of marking methods on the outcomes of body composition analysis and provide guidance for the selection of marking methods in mouse body composition analysis. METHODS: Male C57BL/6J mice aged 6 weeks were randomly assigned for pre- and post- ear tagging measurements. The body composition of the mice was measured using a small animal body composition analyzer, which provided measurements of the mass of fat, lean, and free fluid. Then, the mass of fat, lean and free fluid to body weight ratio was gained. Further data analysis was conducted to obtain the range and coefficient of variation in body composition measurements for each mouse. The distribution of fat and lean tissue in the mice was also analyzed by comparing the fat-to-lean ratio. RESULTS: (1) The mass of all body composition components in the ear tagging group was significantly lower than that in the control group. (2) There was a significant increase in the range and coefficient of variation of body composition measurements between the ear tagging group and the control group. (3) The fat-to-lean ratio in the ear tagging group was significantly lower than that in the control group. CONCLUSIONS: Ear tagging significantly lowered the results of body composition analysis in mice and higher the results of measurement error. Therefore, ear tagging should be avoided as much as possible when conducting body composition analysis experiments in mice.

Enhancing frozen dough quality: Investigating the impact of soy hull polysaccharide (SHP) on rheological properties and microstructure.

The effects of SHP on the texture, rheological properties, starch crystallinity and microstructure of frozen dough were investigated. The efficacy of SHP in enhancing dough quality is concentration-dependent, with frozen dough containing 1.5% SHP exhibiting hardness comparable to fresh dough without SHP (221.31 vs. 221.42 g). Even at 0.5% SHP, there is a noticeable improvement in frozen dough quality. The rheological results showed that the viscoelasticity of dough increased with higher SHP concentration. What's more, XRD and SEM results indicated that the SHP's hydrophilicity reduces the degree of starch hydrolysis, slows down the damage of starch particles during freezing, and consequently lowers the crystallinity of starch. Additionally, CLSM observations revealed that SHP enhances the gluten network structure, diminishing the appearance of holes. Therefore, the physical, chemical properties, and microstructure of frozen dough with SHP demonstrate significant enhancement, suggesting SHP's promising antifreeze properties and potential as a food antifreeze agent.

Advanced-design cross-linked binder enables high-performance silicon-based anodes through in-situ crosslinking based on sodium carboxymethyl cellulose and poly-lysine.

Practical employment of silicon (Si) electrodes in lithium-ion batteries (LIBs) is limited due to the severe volume changes suffered during charging-discharging process, causing serious capacity fading. Here, a composite polymer (CP-10) containing sodium carboxymethyl cellulose (CMC-Na) and poly-lysine (PL) is proposed for the binder of Si-based anodes, and a multifunctional strategy of "in-situ crosslinking" is achieved to alleviate the severe capacity degradation effectively. A cross-linked three-dimensional (3D) network is established through the strong hydrogen bonding interaction and reversible electrostatic interactions within CP-10, offering favorable mechanical tolerance for the extreme volume expansion of Si. Moreover, hydrogen bonding interaction along with ion-dipole interaction formed between CP-10 and Si surface enhance the bonding capability of Si-based anodes, promoting the maintenance of anodes' integrity. Consequently, over 800 cycles are achieved for the Si@CP-10 at 0.5C while maintaining a fixed discharge specific capacity of 1000 mAh g-1. Moreover, the Si/C@CP-10 can stably operate over 500 cycles with a capacity retention of 77.12 % at 1C. The prolonged cycling lifetime of Si/C and Si anodes suggests great potential for this strategy in promoting the implementation of high-capacity LIBs.

pH-responsive Aminated mesoporous silica microspheres modified with soybean hull polysaccharides for curcumin encapsulation and controlled release.

Mesoporous silica microspheres (MSMs) possess poor biocompatibility. This study focuses on integrating MSMs with polymers to obtain hybrid materials with superior performance compared to the individual components and responsive release in specific environments. The synthesized MSMs were aminated, and subsequently, soybean hull polysaccharide (SHPs) was modified onto MSMs-NH2 to produce MSMs-NH2@SHPs nanoparticles. The encapsulation rate, loading rate of curcumin (Cur), and in vitro release behavior were investigated. Results indicated that the encapsulation efficiency of Cur by MSMs-NH2@SHPs nanoparticles reached 75.58%, 6.95 times that of MSMs-NH2 with a load capacity of 35.12%. It is noteworthy that these nanoparticles exhibit pH-responsive release capacity in vitro. The cumulative release rate of the three nanoparticles at pH 5.0 was higher than that at pH 7.4. MSMs-NH2@SHPs had a cumulative release rate of 56.55% at pH 7.4, increasing to 76.21% at pH 5.0. In vitro experiments have shown that MSMs-based nanoparticles have high delivery efficiency and can achieve pH-sensitive drug release, with a high release rate in a slightly acidic acid, highlighting the potential for controlled release of Cur.

Effects of different extrusion temperatures on the physicochemical properties, edible quality and digestive attributes of multigrain reconstituted rice.

Multigrain reconstituted rice, as a nutritious and convenient staple, holds considerable promise for the food industry. Furthermore, highland barley, corn, and other coarse cereals are distinguished by their low glycemic index (GI), rendering them effective in mitigating postprandial blood glucose levels, thereby underscoring their beneficial physiological impact. This study investigated the impact of extrusion temperature on the physicochemical properties, edible quality, and digestibility of multigrain reconstituted rice. The morphology revealed that starch particles that are not fully gelatinized in multigrain reconstituted rice are observed at an extrusion temperature range of 60 °C-90 °C. As the extrusion temperature increased, the degree of gelatinization (DG) increased, while the contents of water, protein, total starch, and amylopectin decreased substantially. Concurrently, the relative crystallinity, orderliness of starch, and heat absorption enthalpy (ΔH) decreased significantly, and water absorption (WAI) and water solubility (WSI) increased markedly. Regarding edible quality, sensory evaluation displayed an initial increase followed by a decrease. In terms of digestibility, the estimated glycemic index (eGI) increased from 61.10 to 70.81, and the GI increased from 60.41 to 75.33. In addition, the DG was significantly correlated with both eGI (r = 0.886**) and GI (r = 0.947**). The results indicated that the ideal extrusion temperature for multigrain reconstituted rice was 90 °C. The findings underscored the pivotal role of optimal extrusion temperatures in the production of multigrain reconstituted rice, which features low GI and high nutritional quality.

A multifunctional ionic liquid coating on 3D-Printed prostheses: Combating infection, promoting osseointegration.

Periprosthetic infection and mechanical loosening are two leading causes of implant failure in orthopedic surgery that have devastating consequences for patients both physically and financially. Hence, advanced prostheses to simultaneously prevent periprosthetic infection and promote osseointegration are highly desired to achieve long-term success in orthopedics. In this study, we proposed a multifunctional three-dimensional printed porous titanium alloy prosthesis coated with imidazolium ionic liquid. The imidazolium ionic liquid coating exhibited excellent bacterial recruitment property and near-infrared (NIR) triggered photothermal bactericidal activity, enabling the prosthesis to effectively trap bacteria in its vicinity and kill them remotely via tissue-penetrating NIR irradiation. In vivo anti-infection and osseointegration investigations in infected animal models confirmed that our antibacterial prosthesis could provide long-term and sustainable prevention against periprosthetic infection, while promoting osseointegration simultaneously. It is expected to accelerate the development of next-generation prostheses and improve patient outcomes after prosthesis implantation.