Immunotherapies Targeting Tumor-Associated Macrophages (TAMs) in Cancer.

Tumor-associated macrophages (TAMs) are one of the most plentiful immune compositions in the tumor microenvironment, which are further divided into anti-tumor M1 subtype and pro-tumor M2 subtype. Recent findings found that TAMs play a vital function in the regulation and progression of tumorigenesis. Moreover, TAMs promote tumor vascularization, and support the survival of tumor cells, causing an impact on tumor growth and patient prognosis. Numerous studies show that reducing the density of TAMs, or modulating the polarization of TAMs, can inhibit tumor growth, indicating that TAMs are a promising target for tumor immunotherapy. Recently, clinical trials have found that treatments targeting TAMs have achieved encouraging results, and the U.S. Food and Drug Administration has approved a number of drugs for use in cancer treatment. In this review, we summarize the origin, polarization, and function of TAMs, and emphasize the therapeutic strategies targeting TAMs in cancer treatment in clinical studies and scientific research, which demonstrate a broad prospect of TAMs-targeted therapies in tumor immunotherapy.

DSN signal amplification strategy based nanochannels biosensor for the detection of miRNAs.

MiRNA-21 is recognized as an important biological marker for the diagnosis, treatment, and prognosis of breast cancer. Here, we have created a nanochannel biosensor utilizing the duplex-specific nuclease (DSN) signal amplification strategy to achieve the detection of miRNAs. In this system, DNA as the capture probe was covalently immobilized on the surface of nanochannels, which hybridized with the target miRNA and forms RNA/DNA duplexes. DSN could cleave the probe DNA in RNA/DNA duplexes, recycling target miRNA, which may again hybridized with other DNA probes. After N cycles, most of the DNA probes had been cleaved, and the content of miRNA could be quantified by detecting changes in surface charge density. This biosensor can distinguish miR-21 from non-complementary miRNAs and one-base mismatched miRNAs, with reliable detection limits as low as 1 fM in PBS. In addition, we had successfully applied this method to analysis of total RNA samples in MCF-7 cells and HeLa cells, and the nanochannels had also shown excellent responsiveness and strong anti-interference ability. This new method is expected to contribute to miRNA detection in clinical diagnostics, providing a unique approach to detecting and distinguishing disease-associated molecules.

Hierarchical mesoporous TiO2/starch-based microparticles used as an efficient and reusable adsorbent for removal of water-soluble dye.

The widespread use of organic dyes in various industrial applications, driven by rapid industrialization, has become a significant environmental concern. Thus, highly efficient and reusable adsorbent for removal of pollutant dyes have gained increasing attention in water treatment. In this study, we present TiO2 nanoparticle-embedded mesoporous starch-based microparticle (TiO2@MSMP) with hierarchical rose-like structure were synthesis by using acetone precipitation of short-chain glucan (SCG) obtained from waxy maize starch. The resulting TiO2@MSMP exhibits an A-type crystalline polymorph and mean particle size of approximately 2 µm, displaying a type IV adsorption isotherm with a mean pore diameter of 19 nm and an average surface area of 12.34 m2/g. The adsorption ability of TiO2@MSMP towards methyl orange (MO) and crystal violet (CV) were 85.8 mg/g and 103.8 mg/g, respectively. The reusability of TiO2@MSMP was achieved by UV irradiation, which resulted in photodegradation of the adsorbed dye over 80 % while maintaining good absorption ability and structural stability during the recycling process. Given its cost-effectiveness, high adsorption capacity, and excellent reusability, TiO2@MSMP holds promise as an effective and environmentally friendly adsorbent with significant potential for removing dyes from aqueous solutions and purifying water.

Facile Synthesis of Multifunctional Mesoporous Starch-Based Microparticle for Effective Hemostasis and Wound Healing.

Uncontrolled hemorrhage and infection are the principal causes of mortality associated with trauma in both military and civilian medical settings. Modified starch granules have emerged as a safe hemostatic agent for irregular and noncompressible wounds, but their performance is constrained by limited hemostasis efficiency and modest antibacterial activity. This study reported a directed self-assembly approach for a multifunctional mesoporous starch-based microparticle loaded with chitosan and calcium ions (Ca@MSMP) used for rapid hemostasis and wound healing. Directed self-assembly of uniform Ca@MSMP with a hierarchical hollow structure in the presence of chitosan was confirmed by scanning electron microscopy (SEM) analysis and pore structure analysis. The resulting Ca@MSMP exhibited a well-defined spherical shape and uniform size of 1 µm and demonstrated excellent antibacterial activity (>95%) without hemolytic activity. Importantly, Ca@MSMP enhanced blood coagulation and platelet aggregation via the synergistic effect of rapid calcium release and chitosan-mediated electrostatic interactions, leading to a significant decrease in blood loss and reduction in hemostasis time in rat tail amputation and liver injury models. In comparative analyses, Ca@MSMP significantly outperformed the commercial hemostatic agent Quickclean, notably enhancing the healing of full-thickness skin wounds in vivo by effectively preventing infection. These results underscore the potential of this innovative hemostatic material in diverse clinical scenarios, offering effective solutions for the management of bleeding in wounds that are irregularly shaped and noncompressible.

Post-processing of a 3D-printed denture base polymer: Impact of a centrifugation method on the surface characteristics, flexural properties, and cytotoxicity.

OBJECTIVES: To investigate the impact of a centrifugation method on the surface characteristics, flexural properties, and cytotoxicity of an additively manufactured denture base polymer. METHODS: The tested specimens were prepared by digital light processing (DLP). A centrifugation method (CENT) was used to remove the residual uncured resin. In addition, the specimens were post-processed with different post-rinsing solutions: isopropanol (IPA), ethanol (EtOH), and tripropylene glycol monomethyl ether (TPM), respectively. A commercial heat-polymerized polymethyl methacrylate was used as a reference (REF). First, the values of surface topography, arithmetical mean height (Sa), and root mean square height (Sq) were measured. Next, flexural strength (FS) and modulus were evaluated. Finally, cytotoxicity was assessed using an extract test. The data were statistically analyzed using a one-way analysis of variance, followed by Tukey's multiple comparison test for post-hoc analysis. RESULTS: The Sa value in the CENT group was lower than in the IPA, EtOH, TPM, and REF groups (p < 0.001). Moreover, the CENT group had lower Sq values than other groups (p < 0.001). The centrifugation method showed a higher FS value (80.92 ± 8.65 MPa) than the EtOH (61.71 ± 12.25 MPa, p < 0.001) and TPM (67.01 ± 9.751 MPa, p = 0.027), while affecting IPA (72.26 ± 8.80 MPa, p = 0.268) and REF (71.39 ± 10.44 MPa, p = 0.231). Also, the centrifugation method showed no evident cytotoxic effects. CONCLUSIONS: The surfaces treated with a centrifugation method were relatively smooth. Simultaneously, the flexural strength of denture base polymers was enhanced through centrifugation. Finally, no evident cytotoxic effects could be observed from different post-processing procedures. CLINICAL SIGNIFICANCE: The centrifugation method could optimize surface quality and flexural strength of DLP-printed denture base polymers without compromising cytocompatibility, offering an alternative to conventional rinsing post-processing.

Heat stress upregulates arachidonic acid to trigger autophagy in sertoli cells via dysfunctional mitochondrial respiratory chain function.

As a key factor in determining testis size and sperm number, sertoli cells (SCs) play a crucial role in male infertility. Heat stress (HS) reduces SCs counts, negatively impacting nutrient transport and supply to germ cells, and leading to spermatogenesis failure in humans and animals. However, how HS affects the number of SCs remains unclear. We hypothesized that changes in SC metabolism contribute to the adverse effects of HS. In this study, we first observed an upregulation of arachidonic acid (AA), an unsaturated fatty acid after HS exposure by LC-MS/MS metabolome detection. By increasing ROS levels, expression of KEAP1 and NRF2 proteins as well as LC3 and LAMP2, 100 µM AA induced autophagy in SCs by activating oxidative stress (OS). We observed adverse effects of AA on mitochondria under HS with a decrease of mitochondrial number and an increase of mitochondrial membrane potential (MMP). We also found that AA alternated the oxygen transport and absorption function of mitochondria by increasing glycolysis flux and decreasing oxygen consumption rate as well as the expression of mitochondrial electron transport chain (ETC) proteins Complex I, II, V. However, pretreatment with 5 mM NAC (ROS inhibitor) and 2 µM Rotenone (mitochondrial ETC inhibitor) reversed the autophagy induced by AA. In summary, AA modulates autophagy in SCs during HS by disrupting mitochondrial ETC function, inferring that the release of AA is a switch-like response, and providing insight into the underlying mechanism of high temperatures causing male infertility.

[Interpretation of the UK screening and treatment of retinopathy of prematurity updated 2022 guidelines]. / è‹±å›½æ—©äº§å„¿è§†ç½‘è†œç— å˜çš„ç­›æŸ¥å’Œæ²»ç–—æŒ‡å—2022更新版解读.

The UK screening and treatment of retinopathy of prematurity (ROP) updated 2022 guidelines were developed by a multidisciplinary guideline development group from the Royal College of Paediatrics and Child Health and the Royal College of Ophthalmologists, following the standards of the National Institute for Health and Care Excellence. They were published on the websites of the Royal College of Paediatrics and Child Health and the Royal College of Ophthalmologists in March 2022, and formally published in Early Human Development in March 2023. The guidelines provide evidence-based recommendations for the screening and treatment of ROP. The most significant change in the 2022 updated version compared to the previous guidelines is the lowering of the gestational age screening criterion to below 31 weeks. The treatment section covers treatment indications, timing, methods, and follow-up visits of ROP. This article interprets the guidelines and compares them with ROP guidelines/consensus in China, providing a reference for domestic peers.

[Evaluation of efficacy of Dihuang Baoyuan Granules for diabetes mellitus and composition and in vivo distribution analysis based on UHPLC-LTQ-Orbitrap MS].

Dihuang Baoyuan Granules is a prescription endorsed by HU Tianbao, a renowned and elderly Chinese medicine practitioner from Beijing, and has demonstrated definite clinical efficacy. The composition of this prescription is intricate as it includes 7 distinct herbal medicines. This study aims to analyze the chemical composition of Dihuang Baoyuan Granules, evaluate its efficacy in the treatment of diabetes and analyze the distribution of the drug components in the plasma, liver, and kidney after administration. The findings will serve as a reference for future research on pharmacodynamic substances of this prescription. UHPLC-LTQ-Orbitrap MS was employed to analyze the main chemical components of Dihuang Baoyuan Granules. A Waters ACQUITY Premier HSS T3 column(2.1 mm×100 mm, 1.8 µm) was used for chromatographic separation with 0.1% formic acid(A)-acetonitrile(B) as the mobile phases in a gradient elution at a flow rate of 0.3 mL·min~(-1). Electrospray ionization(ESI) source was used to acquire data in positive and negative ion modes. Furthermore, a rat model of diabetes mellitus was established by feeding with a high-sugar high-fat diet, and injection with streptozocin at a dose of 35 mg·kg~(-1), and the modeled rats were then administrated with Dihuang Baoyuan Granules. The fasting blood glucose, hemoglobin A1c, and other relevant indicators were measured, and the substances present in the plasma, liver, and kidney were identified. By reference to quasi-molecular ions, MS/MS fragment ions, MS spectra of reference substances, and compound information in available reports, 191 components were identified in Dihuang Baoyuan Granules, including 29 alkaloids, 24 flavonoids, 22 organic acids, 16 amino acids, 12 terpenes, 11 steroid saponins, 9 sugars, 8 phenylethanoid glycosides, 8 nucleosides, 2 phenylpropanoids, and 49 others compounds. Eighty-three chemical components were identified in rat plasma, 109 in the liver, and 98 in the kidney. Component identification and characterization of Dihuang Baoyuan Granules in vitro and in vivo provide efficacy information and guidance for the basic research on the pharmacodynamic substances and further clinical application of this prescription.

Impact of nomenclature as metabolic associated steatotic liver disease on steatotic liver disease prevalence and screening: a prospective population survey in Asians.

BACKGROUND AND AIM: The introduction of the latest nomenclature, metabolic associated steatotic liver disease (MASLD), proposed by the multi-society without Asian society consensus statement, aims to redefine the diagnostic criteria for metabolic associated fatty liver disease (MAFLD). However, its effect on the epidemiology in Asia remains unclear. METHOD: We conducted a population-based cross-sectional survey on fatty liver disease using multistage stratified random sampling of participants from Guangzhou, a representative area in China (ChiCTR2000033376). Demographic, socioeconomic, lifestyle, and laboratory data were collected. Hepatic steatosis and the severity of fibrosis were assessed using FibroScan. RESULTS: A total of 7388 individuals were recruited, the proportion of which meeting the definitions for nonalcoholic fatty liver disease (NAFLD), MAFLD, and MASLD were 2359 (31.9%), 2666 (36.1%), and 2240 (30.3%), respectively. One hundred and twenty (1.6%) patients had cryptogenic SLD, and 537 (7.3%) patients were diagnosed with MetALD. MASLD did not significantly differ from NAFLD and MAFLD, except that MAFLD patients had a lower proportion of males, hypertension, and diabetes and were less likely to consume tea (P < 0.05). Both cryptogenic SLD and MASLD non-MAFLD patients exhibited milder hepatic steatosis and a lower frequency of liver injury than NAFLD, MAFLD, or MASLD patients (all P < 0.05). An increased HOMA-IR (adjusted OR: 1.33, 95% CI: 1.10-2.03) was associated with higher risk of moderate-to-severe steatosis for MASLD non-MAFLD patients, while consuming more cups of tea (P for trend = 0.015) showed inverse associations. CONCLUSION: Irrespective of terminology used is that fatty liver disease is highly prevalent in the Han Chinese population. Differences in insulin resistance and lifestyle risk factors are associated with redefinition disparities.

Triterpenoid saponins from Bupleurum marginatum and their anti-liver fibrotic activities.

A new triterpenoid saponin (1), along with five known compounds (2-6), was isolated from Bupleurum marginatum Wall. ex DC, of which compounds 2-4 were obtained for the first time from this plant. The structures were confirmed by the analysis of 1D, 2D NMR, and HR-ESIMS data, and comparison with previous spectral data. Anti-liver fibrotic activities of the isolates were determined as proliferation inhibition of LPS-induced activation of HSC-T6 in vitro.

A case report of a normal fertile woman with 46,XX/46,XY somatic chimerism reveals a critical role for germ cells in sex determination.

Individuals with 46,XX/XY chimerism can display a wide range of characteristics, varying from hermaphroditism to complete male or female, and can display sex chromosome chimerism in multiple tissues, including the gonads. The gonadal tissues of females contain both granulosa and germ cells. However, the specific sex chromosome composition of the granulosa and germ cells in 46,XX/XY chimeric female is currently unknown. Here, we reported a 30-year-old woman with secondary infertility who displayed a 46,XX/46,XY chimerism in the peripheral blood. FISH testing revealed varying degrees of XX/XY chimerism in multiple tissues of the female patient. Subsequently, the patient underwent preimplantation genetic testing (PGT) treatment, and 26 oocytes were retrieved. From the twenty-four biopsied mature oocytes, a total of 23 first polar bodies (PBs) and 10 second PBs were obtained. These PBs and two immature metaphase I (MI) oocytes only displayed X chromosome signals with no presence of the Y, suggesting that all oocytes in this chimeric female were of XX germ cell origin. On the other hand, granulosa cells obtained from individual follicles exhibited varied proportions of XX/XY cell types, and six follicles possessed 100% XX or XY granulosa cells. A total of 24 oocytes were successfully fertilized, and 12 developed into blastocysts, where 5 being XY and 5 were XX. Two blastocysts were transferred with one originating from an oocyte aspirated from a follicle containing 100% XY granulosa cells. This resulted in a twin pregnancy. Subsequent prenatal diagnosis confirmed normal male and female karyotypes. Ultimately, healthy boy-girl twins were delivered at full term. In summary, this 46,XX/XY chimerism with XX germ cells presented complete female, suggesting that germ cells may exert a significant influence on the sexual determination of an individual, which provide valuable insights into the intricate processes associated with sexual development and reproduction.

Cyclo[2]pyridine[8]pyrrole: An Expanded Porphyrinoid with Three Closed-Shell Oxidation States.

We report here an expanded porphyrinoid, cyclo[2]pyridine[8]pyrrole, 1, that can exist at three closed-shell oxidation levels. Macrocycle 1 was synthesized via the oxidative coupling of two open chain precursors and fully characterized by means of NMR and UV-vis spectroscopies, MS, and X-ray crystallography. Reduction of the fully oxidized form (1, blue) with NaBH4 produced either the half-oxidized (2, teal) or fully reduced forms (3, pale yellow), depending on the amount of reducing agent used and the presence or absence of air. Reduced products 2 or 3 can be oxidized to 1 by various oxidants (quinones, FeCl3, and AgPF6). Macrocycle 1 also undergoes proton-coupled reductions with I-, Br-, Cl-, SO32-, or S2O32- in the presence of an acid. Certain thiol-containing compounds likewise reduce 1 to 2 or 3. This conversion is accompanied by a readily discernible color change, making cyclo[2]pyridine[8]pyrrole 1 able to differentiate biothiols, such as cysteine (Cys), homocysteine (Hcy), and glutathione (GSH).

The Missing Chalcogen Bonding Donor: Strongly Polarized Oxygen of Water.

A biscyclen molecular cabin, synthesized by connecting two cyclen macrocycles with four linkages, entraps a Li+···H2O···Li+ trimer with a water molecule clamped by two Li+ ions. This configuration results in strongly polarized water, characterized by a water proton resonance shift of up to 10.00 ppm. The arrangement facilitates unprecedented O-centered chalcogen bonds between the lone pairs of pyridinyl nitrogen atoms and polarized water oxygen, as confirmed by X-ray crystallography, NMR spectroscopy, and theoretical calculations. Further observation of O-centered chalcogen bonding in a H2O·(LiCl)2 cluster suggests its widespread presence in hydrated salt systems.

Effect of post-curing conditions on surface characteristics, physico-mechanical properties, and cytotoxicity of a 3D-printed denture base polymer.

OBJECTIVE: This study aims to investigate the influence of post-polymerization (post-curing) conditions on surface characteristics, flexural properties, water sorption and solubility, and cytotoxicity of additively manufactured denture base materials. METHODS: The tested specimens were additively manufactured using digital light processing and classified into different post-curing condition groups: submerged in water (WAT), submerged in glycerin (GLY), and air exposure (AIR). An uncured specimen (UNC) was used as a control. The surface topography and roughness were observed. The flexural strength and modulus were determined via a three-point bending test. The water sorption and solubility were subsequently tested. Finally, an extract test was performed to assess cytotoxicity. RESULTS: Different post-curing conditions had no significant effects on the surface topography and roughness (Sa value). Various post-curing conditions also had no significant effects on the flexural strength. Notably, the flexural modulus of the WAT group (2671.80 ± 139.42 MPa) was significantly higher than the AIR group (2197.47 ± 197.93 MPa, p = 0.0103). After different post-curing conditions, the water sorption and solubility of the specimens met the ISO standards. Finally, all post-curing conditions effectively reduced cytotoxic effects. SIGNIFICANCES: Post-curing with different oxygen levels improved flexural properties, and flexural modulus significantly increased after the specimens were submerged in water. In addition, water sorption and solubility, and cytocompatibility were optimized by post-curing, irrespective of the post-curing conditions. Therefore, the water-submerged conditions optimized the flexural modulus of the 3D-printed denture base materials.

[Study on biomarkers of acteoside in treating puromycin aminonucleoside nephropathy in young rats based on non-targeted urine metabolomics technology].

This study aims to reveal the endogenous metabolic characteristics of acteoside in the young rat model of purinomycin aminonucleoside nephropathy(PAN) by non-targeted urine metabolomics and decipher the potential mechanism of action. Biochemical indicators in the urine of rats from each group were determined by an automatic biochemical analyzer. The potential biomarkers and related core metabolic pathways were identified by ultra-high performance liquid chromatography coupled with linear ion trap-Orbitrap mass spectrometry(UHPLC-LTQ-Orbitrap MS) combined with principal component analysis(PCA) and orthogonal partial least squares-discriminant analysis(OPLS-DA). MetaboAnalyst 5.0 was used to establish the receiver operating characteristic(ROC) curve for evaluating the clinical diagnostic performance of core metabolites. The results showed that acteoside significantly decreased urinary protein-to-creatinine ratio in PAN young rats. A total of 17 differential metabolites were screened out by non-targeted urine metabolomics in PAN young rats and they were involved in phenylalanine metabolism and phenylalanine, tyrosine and tryptophan biosynthesis. Thirtten differential metabolites were screened by acteoside intervention in PAN young rats, and they were involved in phenylalanine metabolism and arginine and proline metabolism. Among them, leucylproline and acetophenone were the differential metabolites that were significantly recovered after acteoside treatment. These pathways suggest that acteoside treats PAN in young rats by regulating amino acid metabolism. The area under the curve of two core biomarkers, leucylproline and acetophenone, were both greater than 0.9. In summary, acteoside may restore amino acid metabolism by regulating endogenous differential metabolites in PAN young rats, which will help to clarify the mechanism of acteoside in treating chronic glomerulonephritis in children. The characteristic biomarkers screened out have a high diagnostic value for evaluating the treatment of chronic glomerulonephritis in children with acteoside.

[Component profile analysis of Sanhan Huashi Formula based on UHPLC-LTQ-Orbitrap-MS, GC-MS, and UHPLC-QQQ-MS/MS].

This study comprehensively analyzed the active components of Sanhan Huashi Formula using qualitative and quantitative mass spectrometry techniques, laying the foundation for understanding its pharmacological substance basis. UHPLC-LTQ-Orbitrap-MS and GC-MS technologies were used to analyze and identify the volatile and non-volatile components in Sanhan Huashi Formula. UHPLC-QQQ-MS/MS technology was used to simultaneously determine the content of 27 major active components in the formula. The results showed that 308 major chemical components were identified in Sanhan Huashi Formula, among which 60 compounds were identified by comparing with reference standards, mainly including alkaloids, flavonoids, coumarins, triterpenoid saponins, amino acids, and nucleosides. GC-MS technology preliminarily identified 52 volatile compounds, with γ-eudesmol and ß-eudesmol as the main components. The quantitative results demonstrated good linearity(r>0.99) for the 27 active components, indicating the stability, simplicity, and reliability of the established method. Among them, amygdalin, nodakenin, arecoline, ephedrine, and pseudoephedrine had relatively high content and were presumably the main pharmacologically active substances. In conclusion, this study systematically and comprehensively characterized the major chemical components and patterns in Sanhan Huashi Formula, providing a basis for understanding its pharmacological mechanisms and clinical applications.

A review of nucleic acid-based detection methods for foodborne viruses: Sample pretreatment and detection techniques.

Viruses are major pathogens that cause food poisoning when ingested via contaminated food and water. Therefore, the development of foodborne virus detection technologies that can be applied throughout the food distribution chain is essential for food safety. A common nucleic acid-based detection method is polymerase chain reaction (PCR), which has become the gold standard for monitoring food contamination by viruses due to its high sensitivity, and availability of commercial kits. However, PCR-based methods are labor intensive and time consuming, and are vulnerable to inhibitors that may be present in food samples. In addition, the methods are restricted with regard to site of analysis due to the requirement of expensive and large equipment for sophisticated temperature regulation and signal analysis procedures. To overcome these limitations, optical and electrical readout biosensors based on nucleic acid isothermal amplification technology and nanomaterials have emerged as alternatives for nucleic acid-based detection of foodborne viruses. Biosensors are promising portable detection tools owing to their easy integration into compact platforms and ability to be operated on-site. However, the complexity of food components necessitates the inclusion of tedious preprocessing steps, and the lack of stability studies on residual food components further restricts the practical application of biosensors as a universal detection method. Here, we summarize the latest advances in nucleic acid-based strategies for the detection of foodborne viruses, including PCR-based and isothermal amplification-based methods, gene amplification-free methods, as well as food pretreatment methods. The principles, strengths/disadvantages, and performance of each method, problems to be solved, and future prospects for the development of a universal detection method are discussed.

Correlation between LSM1 Expression and Clinical Outcomes in Glioblastoma and Functional Mechanisms.

Background: Glioblastoma (GBM) is an aggressive form of brain tumor characterized by limited treatment options and a bleak prognosis. Although the role of Like-Sm 1 (LSM1), a component of the mRNA splicing machinery, has been studied in various cancers, its significance in GBM remains unclear. The purpose of this research was to investigate the expression of LSM1 and its role in driving GBM progression. Methods: We analyzed gene expression data obtained from TCGA and GTEx databases to compare the levels of LSM1 expression between GBM and normal brain tissues. To assess the impact of LSM1, we conducted experiments using U87 GBM cells, wherein we manipulated LSM1 expression through overexpression and knockdown techniques. These experiments allowed us to evaluate cellular behaviors such as proliferation and invasion. Additionally, we explored the correlation between LSM1 expression and immune cell infiltration in GBM. Results: Our analysis of TCGA and GTEx datasets revealed a significant upregulation of LSM1 expression in GBM compared to normal brain tissues. In our in vitro experiments using U87 cells, we observed that LSM1 overexpression promoted cell proliferation and invasion, while LSM1 knockdown exerted the opposite effects. Moreover, we discovered correlations between LSM1 expression and immune cell infiltration in GBM, specifically involving TFH cells, CD56bright cells, macrophages, and Th2 cells. Conclusions: The findings of this study demonstrate the upregulation of LSM1 in GBM and its contribution to tumor progression by enhancing cell proliferation, invasion, and influencing immune cell infiltration. Our research sheds light on the potential oncogenic role of LSM1 in GBM and suggests its viability as a therapeutic target for this aggressive brain tumor.

Bioprospecting of Actinobacterial Diversity and Antibacterial Secondary Metabolites from the Sediments of Four Saline Lakes on the Northern Tibetan Plateau.

The Tibetan Plateau, known as the "Roof of the World" and "The Third Pole", harbors numerous saline lakes primarily distributed in the Northern Tibetan Plateau. However, the challenging conditions of high altitude, low oxygen level, and harsh climate have limited investigations into the actinobacteria from these saline lakes. This study focuses on investigating the biodiversity and bioactive secondary metabolites of cultivable actinobacteria isolated from the sediments of four saline lakes on the Northern Tibetan Plateau. A total of 255 actinobacterial strains affiliated with 21 genera in 12 families of 7 orders were recovered by using the pure culture technique and 16S rRNA gene phylogenetic analysis. To facilitate a high-throughput bioactivity evaluation, 192 isolates underwent OSMAC cultivation in a miniaturized 24-well microbioreactor system (MATRIX cultivation). The antibacterial activity of crude extracts was then evaluated in a 96-well plate antibacterial assay. Forty-six strains demonstrated antagonistic effects against at least one tested pathogen, and their underlying antibacterial mechanisms were further investigated through a dual-fluorescent reporter assay (pDualrep2). Two Streptomyces strains (378 and 549) that produce compounds triggering DNA damage were prioritized for subsequent chemical investigations. Metabolomics profiling involving HPLC-UV/vis, UPLC-QTOF-MS/MS, and molecular networking identified three types of bioactive metabolites belonging to the aromatic polyketide family, i.e., cosmomycin, kidamycin, and hedamycin. In-depth analysis of the metabolomic data unveiled some potentially novel anthracycline compounds. A genome mining study based on the whole-genome sequences of strains 378 and 549 identified gene clusters potentially responsible for cosmomycin and kidamycin biosynthesis. This work highlights the effectiveness of combining metabolomic and genomic approaches to rapidly identify bioactive chemicals within microbial extracts. The saline lakes on the Northern Tibetan Plateau present prospective sources for discovering novel actinobacteria and biologically active compounds.

Accuracy of autonomous robotic surgery for dental implant placement in fully edentulous patients: A retrospective case series study.

OBJECTIVES: This study evaluated the accuracy of dental implant placement using the robotic computer-assisted implant surgery (r-CAIS) technology in fully edentulous patients. MATERIALS AND METHODS: Fully edentulous and terminal dentition patients were enrolled for r-CAIS technology. Based on the cone-beam computed tomography (CBCT) examination, a customized positioning marker and a preoperative surgical plan were created before surgery. During the implant surgery, the implant osteotomy and placement were automatically performed using an autonomous robotic surgery system under the surgeon's supervision. A postoperative CBCT scan was used to determine the discrepancies between the planned and placed implants. RESULTS: Ten patients with 59 implants underwent autonomous robotic surgery. No adverse surgical events occurred. The deviations of global coronal, global apical, and angular were 0.67 ± 0.37 mm (95% CI: 0.58-0.77 mm), 0.69 ± 0.37 mm (95% CI: 0.59-0.78 mm), and 1.27° ± 0.59° (95% CI: 1.42°-1.11°), respectively. CONCLUSIONS: The autonomous r-CAIS technology proved an accurate surgical approach for implant placement in fully edentulous patients due to the control of the angular deviation. Autonomous robotic surgery seems promising as an accurate technology for treating fully edentulous patients. However, further trials are required to provide more hard clinical evidence.