Efficient degradation and mineralization of polyethylene terephthalate microplastics by the synergy of sulfate and hydroxyl radicals in a heterogeneous electro-Fenton-activated persulfate oxidation system.

The presence of polyethylene terephthalate (PET) microplastics (MPs) in waters has posed considerable threats to the environment and humans. In this work, a heterogeneous electro-Fenton-activated persulfate oxidation system with the FeS2-modified carbon felt as the cathode (abbreviated as EF-SR) was proposed for the efficient degradation of PET MPs. The results showed that i) the EF-SR system removed 91.3 ± 0.9 % of 100 mg/L PET after 12 h at the expense of trace loss (< 0.07 %) of [Fe] and that ii) dissolved organics and nanoplastics were first formed and accumulated and then quickly consumed in the EF-SR system. In addition to the destruction of the surface morphology, considerable changes in the surface structure of PET were noted after EF-SR treatment. On top of the emergence of the O-H bond, the ratio of C-O/C=O to C-C increased from 0.25 to 0.35, proving the rupture of the backbone of PET and the formation of oxygen-containing groups on the PET surface. With the verified involvement and contributions of SO4•- and •OH, three possible paths were proposed to describe the degradation of PET towards complete mineralization through chain cleavage and oxidation in the EF-SR system.

Performance and mechanistic studies of rapid atenolol degradation through peroxymonosulfate activation by V, Co, and bamboo carbon catalyst.

Developing the Co-based catalysts with high reactivity for the sulfate radical (SO4-·)-based advanced oxidation processes (SR-AOPs) has been attracting numerous attentions. To improve the peroxymonosulfate (PMS) activation process, a novel Co-based catalyst simultaneously modified by bamboo carbon (BC) and vanadium (V@CoO-BC) was fabricated through a simple solvothermal method. The atenolol (ATL) degradation experiments in V@CoO-BC/PMS system showed that the obtained V@CoO-BC exhibited much higher performance on PMS activation than pure CoO, and the V@CoO-BC/PMS system could fully degrade ATL within 5 min via the destruction of both radicals (SO4-· and O2-··) and non-radicals (1O2). The quenching experiments and electrochemical tests revealed that the enhancing mechanism of bamboo carbon and V modification involved four aspects: (i) promoting the PMS and Co ion adsorption on the surface of V@CoO-BC; (ii) enhancing the electron transfer efficiency between V@CoO-BC and PMS; (iii) activating PMS with V3+ species; (iv) accelerating the circulation of Co2+ and Co3+, leading to the enhanced yield of reactive oxygen species (ROS). Furthermore, the V@CoO-BC/PMS system also exhibited satisfactory stability under broad pH (3-9) and good efficiency in the presence of co-existing components (HCO3-, NO3-, Cl-, and HA) in water. This study provides new insights to designing high-performance, environment-friendly bimetal catalysts and some basis for the remediation of antibiotic contaminants with SR-AOPs.

Porous covalent organic framework nanofibrous membrane for excellent enrichment and ultra-high sensitivity detection of trace organochlorine pesticides in water.

Developing adsorbents with high performance and long service life for effective extracting the trace organochlorine pesticides (OCPs) from real water is attracting numerous attentions. Herein, a self-standing covalent organic framework (COF-TpPa) membrane with fiber morphology was successfully synthesized by using electrospun nanofiber membranes as template and employed as solid-phase microextraction (SPME) coating for ultra-high sensitivity extraction and analysis of trace OCPs in water. The as-synthesized COF-TpPa membrane exhibited a high specific surface area (800.83 m2 g-1), stable nanofibrous structure, and excellent chemical and thermal stability. Based on the COF-TpPa membrane, a new SPME analytical method in conjunction with gas chromatography-mass spectrometry (GC-MS) was established. This proposed method possessed favorable linearity in concentration of 0.05-2000 ng L-1, high sensitivity with enrichment factors ranging from 2175 to 5846, low limits of detection (0.001-0.150 ng L-1), satisfactory precision (RSD < 10 %), and excellent repeatability (>150 cycles), which was better than most of the reported works. Additionally, the density functional theory (DFT) calculations and XPS results demonstrated that the outstanding enrichment performance of the COF-TpPa membrane was owing to synergistic effect of π-π stacking effects, high specific surface area and hydrogen bonding. This work will expect to extend the applications of COF membrane to captures trace organic pollutants in complex environmental water, as well as offer a multiscale interpretation for the design of effective adsorbents.

Protein extraction from chlorella pyrenoidosa microalgae: Green methodologies, functional assessment, and waste stream valorization for bioenergy production.

C. pyrenoidosa, a species of microalgae, has been recognized as a viable protein source for human consumption. The primary challenges in this context are the development of an efficient extraction process and the valorization of the resultant waste streams. This study, situated within the paradigm of circular economy, presents an innovative extraction approach that achieved a protein extraction efficiency of 62 %. The extracted protein exhibited remarkable oil-water emulsifying performances, such as uniform morphology with high creaming stability, suggesting a sustainable alternative to conventional emulsifiers. Additionally, hydrothermal liquefaction technique was employed for converting the residual biomass and waste solution from the extraction process into biocrude. A biocrude yield exceeding 40 wt%, characterized by a carbon content of 73 % and a higher heating value of 36 MJ/kg, were obtained. These findings demonstrate the promising potential of microalgae biorefinery, which is significant for paving toward circular economy and zero-waste society.

Gold Nanoparticles Bioproduced in Cyanobacteria in the Initial Phase Opened an Avenue for the Discovery of Corresponding Cerium Nanoparticles.

The production of isolated metallic nanoparticles with multifunctionalized properties, such as size and shape, is crucial for biomedical, photocatalytic, and energy storage or remediation applications. This study investigates the initial particle formations of gold nanoparticles (AuNPs) bioproduced in the cyanobacteria Anabaena sp. using high-resolution transmission electron microscopy images for digital image analysis. The developed method enabled the discovery of cerium nanoparticles (CeNPs), which were biosynthesized in the cyanobacteria Calothrix desertica. The particle size distributions for AuNPs and CeNPs were analyzed. After 10 h, the average equivalent circular diameter for AuNPs was 4.8 nm, while for CeNPs, it was approximately 5.2 nm after 25 h. The initial shape of AuNPs was sub-round to round, while the shape of CeNPs was more roundish due to their amorphous structure and formation restricted to heterocysts. The local PSDs indicate that the maturation of AuNPs begins in the middle of vegetative cells and near the cell membrane, compared to the other regions of the cell.

Enhanced lactic acid production from household food waste under hyperthermophilic conditions: Mechanisms and regulation.

An annual production of about 500 million tons of household food waste (HFW) has been documented, resulting in significant implications for human health and the environment in the absence of appropriate treatment. The anaerobic fermentation of HFW in an open system offers the potential to recover high value-added products, lactic acid (LA), thereby simultaneously addressing waste treatment and enhancing resource recovery efficiency. Most of LA fermentation studies have been conducted under mesophilic and thermophilic conditions, with limited research on the production of LA through anaerobic fermentation under hyperthermophilic conditions. This study aimed to produce LA through anaerobic fermentation from HFW under hyperthermophilic conditions (70 ± 1 °C), while varying pH values (5.0 ± 0.1, 7.0 ± 0.1, and 9.0 ± 0.1), and compare the results with LA production under mesophilic (35 ± 1 °C) and thermophilic (52 ± 1 °C) conditions. The findings of this study indicated that the combination of hyperthermophilic conditions and a neutral pH (pH7_70) yielded the highest concentration of LA, measuring at 17.75 ± 1.51 g/L. The mechanism underlying the high yield of LA at 70 °C was elucidated through the combined analysis of organics dissolution, enzymes activities, and 16S rRNA microbiome sequencing.

Efficient dispersive solid phase extraction of trace nitrophenol pollutants in water with triazine porous organic polymer modified nanofiber membrane.

Detecting trace endocrine disruptors in water is crucial for evaluating the water quality. In this work, a innovative modified polyacrylonitrile@cyanuric chloride-triphenylphosphine nanofiber membrane (PAN@CC-TPS) was prepared by in situ growing triazine porous organic polymers on the polyacrylonitrile (PAN) nanofibers, and used in the dispersive solid phase extraction (DSPE) to enrich trace nitrobenzene phenols (NPs) in water. The resluted PAN@CC-TPS nanofiber membrane consisted of numerous PAN nanofibers cover with CC-TPS solid spheres (∼2.50 µm) and owned abundant functional groups, excellent enrichment performance and good stability. In addition, the method based on PAN@CC-TPS displayed outstanding capacity in detecting the trace nitrobenzene phenols, with 0.50-1.00 µg/L of the quantification, 0.10-0.80 µg/L of the detection limit, 85.35-113.55 % of the recovery efficiency, and 98.08-103.02 of the enrichment factor, which was comparable to most materials. Meanwhile, when PAN@CC-TPS was adopted in the real water samples (sea water and river water), the high enrichment factors and recovery percentages strongly confirmed the feasibility of PAN@CC-TPS for enriching and detecting the trace NPs. Besides, the related mechanism of extracting NPs on PAN@CC-TPS mainly involved the synergistic effect of hydrogen bonding, π-π stacking and hydrophobic effect.

Insights into Enhanced Peroxydisulfate Activation with B and Fe Co-Doped Biochar from Bark for the Rapid Degradation of Guaiacol.

A boron and iron co-doped biochar (B-Fe/biochar) from Masson pine bark was fabricated and used to activate peroxydisulfate (PDS) for the degradation of guaiacol (GL). The roles of the dopants and the contribution of the radical and non-radical oxidations were investigated. The results showed that the doping of boron and iron significantly improved the catalytic activity of the biochar catalyst with a GL removal efficiency of 98.30% within 30 min. The degradation of the GL mainly occurred through the generation of hydroxyl radicals (·OHs) and electron transfer on the biochar surface, and a non-radical degradation pathway dominated by direct electron transfer was proposed. Recycling the B-Fe/biochar showed low metal leaching from the catalyst and satisfactory long-term stability and reusability, providing potential insights into the use of metal and non-metal co-doped biochar catalysts for PDS activation.

Insights to PFOS elimination with peroxydisulfate activation mediated by boron modified Fe/C catalysts: Enhancing mechanism of boron and PFOS degradation pathway.

In this study, the boron-doped iron-carbon composite (Fe@B/C-2) was prepared via a simple solvothermal and secondary calcination process by using iron metal-organic frameworks (Fe-MOFs) as precursor. The obtained Fe@B/C-2 possessed abundant active sites and low iron ion leaching, and exhibited excellent performance on peroxydisulfate (PDS) activation for efficient PFOS (10 mg/L) degradation (94 %) in 60 min, with 0.2 g/L of catalyst dosage, 1.0 g/L of PDS dosage and at 5.0 of initial pH. The radical scavenging and electron paramagnetic resonance (EPR) tests demonstrated that SO4·- and ·OH were the primary active species during PFOS elimination. Under the attack of these species, PFOS was first transformed into PFOA, followed by a sequential defluorination process, and lastly mineralized into CO2 and F-. Notably, DFT results revealed that Fe species, -BC3/-BC2O structures on the carbon matrix performed crucial roles in PDS activation. The extraordinary catalytic activity of Fe@B/C-2 was attributable to the synergistic effects of Fe nanoparticles and the B-doped on carbon matrix. The doped B not only could activate the inert carbon skeleton and provided more catalytic centers, but also could accelerate the electron transfer efficiency, leading to a boost in PDS decomposition.

Rapid PFOS mineralization with peroxydisulfate activation process mediated by N modified Fe-based catalyst.

As the cheap and efficient catalysts, the iron-based catalysts have been considered as one of the most promising catalysts for peroxydisulfate (PDS) activation and the development of high-performance iron-based catalysts are attracting growing attentions. In this work, a magnetic Fe-based catalysts (Fe/NC-1000) was obtained by using Fe modified ZIF-8 as the precursor and used to activate the PDS for the degradation of perfluorooctane sulphonate (PFOS). Morphology and structure analysis showed that the resulted Fe/NC-1000 catalyst was displayed porous spheres (40-60 nm) and mainly composed of Fe0, FeNx and carbon. When Fe/NC-1000 was employed to activate the PDS (0.1 g/L of catalyst dosage, 0.5 g/L of PDS dosage and at initial pH of 4.6), the Fe/NC-1000/PDS system exhibited excellent efficiency (97.9 ± 0.1) % for PFOS (10 mg/L) degradation within 30 min. The quenching tests and EPR results revealed that the Fe/NC-1000/PDS system degraded PFOS primarily through singlet oxygen (1O2) evolution and electron-transfer process. Besides, based on the degradation byproducts determined by LC-MS-MS, the PFOS first occurred de-sulfonation to form PFOA, and then the resulted PFOA underwent stepwise defluorination in the Fe/NC-1000/PDS system. Density Functional Theory (DFT) calculations and electrochemistry tests strongly confirmed that Fe/NC-1000 exhibited high electron transfer efficiency, resulting in promoted performance on activating PDS. Importantly, the results of Ecological Structure-Activity Relationship (ECOSAR) analysis showed that the intermediates were lowly toxic during the PFOS degradation, manifesting a green process for PFOS removal. This study would provide more understandings for the persulfate activation process mediated by Fe-based catalysts for Perfluorinated alkyl substances (PFAS) elimination.

A biomass fiber adsorbent grafted with phosphate/amidoxime for efficient extraction of uranium from seawater by synergistic effect.

There are approximately 4 billion tons of uranium in the ocean, which is unmatched by the surface. Nevertheless, it's very challenging to extract uranium from the ocean due to the exceedingly low concentration of uranium in the ocean (about 3.3 µg L-1) as well as high salinity level. Current methods are often limited by selectivity, sustainability, economics, etc. Herein, phosphoric acid group and amidoxime group were grafted to skin collagen fibers through " initiated access" to design a new uranium extraction material, abbreviated as CGPA. Through laboratory simulation experiments, it is concluded that the maximum adsorption capacity of CGPA for uranium reaches 263.86 mg g-1. It has high adsorption, selectivity, and reusability for uranium. In the actual seawater extraction experiment, CGPA obtained 29.64 µg of uranium after extracting 10.0 L of seawater, and the extraction rate was 90.1%. The adsorbent has excellent effects in kinetics, selectivity, extraction capacity, renewability, etc. In the extraction of uranium from seawater, and is an economically feasible and industrially expandable adsorbent.

Fabrication of covalent organic frameworks modified nanofibrous membrane for efficiently enriching and detecting the trace polychlorinated biphenyls in water.

Enriching and detecting the trace pollutants in actual matrices are critical to evaluating the water quality. Herein, a novel nanofibrous membrane, named PAN-SiO2@TpPa, was prepared by in situ growing ß-ketoenamine-linked covalent organic frameworks (COF-TpPa) on the aminated polyacrylonitrile (PAN) nanofibers, and adopted for enriching the trace polychlorinated biphenyls (PCBs) in various natural water body (river, lake and sea water) through the solid-phase micro-extraction (SPME) process. The resulted nanofibrous membrane owned abundant functional groups (-NH-, -OH and aromatic groups), outstandingly thermal and chemical stability, and excellent ability in extracting PCBs congeners. Based on the SPME process, the PCBs congeners could be quantitatively analyzed by the traditional gas chromatography (GC) method, with the satisfactory linear relationship (R2>0.99), low detection limit (LODs, 0.1∼5 ng L-1), high enrichment factors (EFs, 2714∼3949) and multiple recycling (>150 runs). Meanwhile, when PAN-SiO2@TpPa was adopted in the real water samples, the low matrix effects on the enrichment of PCBs at both 5 and 50 ng L-1 over PAN-SiO2@TpPa membrane firmly revealed the feasibility of enriching the trace PCBs in real water. Besides, the related mechanism of extracting PCBs on PAN-SiO2@TpPa mainly involved the synergistic effect of hydrophobic effect, π-π stacking and hydrogen bonding.

Ultra-efficient adsorption of diclofenac sodium on fish-scale biochar functionalized with H3PO4 via synergistic mechanisms.

Developing safe and efficient diclofenac sodium (DS) removal technology has become a critical issue. This study synthesized the fish-scale biochar by co-pyrolysis of fish scale and phosphoric acid (H3PO4). In addition to increasing the specific surface area and pore volume of fish-scale biochar, H3PO4 assisted in the formation of Graphitic N and sp2 C, as well as reacting with C═O groups to form a significant number of phosphorus-containing groups. All these functional groups could act as major active sites for DS adsorption. Adsorption data could well fit pseudo-second-order and Langmuir models. The maximum adsorption capacity of FSB600-15 for DS was 967.1 mg g-1, which was much better than that reported in the literature. Under the synergistic effect of various mechanisms (pore-filling effect, electrostatic attraction, H-bonding, π-π, and n-π electron donor-acceptor interactions), the DS ultra-efficient adsorption on FSB600-15 was realized. Meanwhile, the DS adsorption by FSB600-15 was an endothermic, spontaneous, and entropy-increasing process. Furthermore, the DS adsorption capacity was more than 426.5 mg g-1 in the actual water, which was sufficient for practical applications.

Effectively remove printing ink from plastic surface over quaternary ammonium-modified waste cooking oil.

The printing ink on the plastic surface will greatly reduce the quality of recycled plastic products. In this work, quaternary ammonium-modified waste cooking oil (WCOEQ) was fabricated using waste cooking oil, epichlorohydrin, and trimethylamine aqueous solution as raw materials, through ring-opening esterification and quaternary amination reaction. The synthesis conditions of WCOEQ were optimised, and the structure and properties of WCOEQ were characterised by Fourier transform infrared spectroscopy, zeta potential, and 1H NMR. Furthermore, WCOEQ had excellent emulsifying performance, low kraft point, low critical micelle concentration value, good foaming, and stability, which could effectively reduce the surface tension of water, showing application potential in the field of plastic deinking. Importantly, compared with the waste cooking oil without deinking effect, the WCOEQ had an excellent deinking performance on the ink on the plastic surface, and the deinking efficiency could be improved by increasing the concentration of the deinking agent, the deinking temperature, and prolonging the pre-soaking and stirring time. The results of atomic force microscope, energy-dispersive spectroscopy, optical photos, and Leica microscope showed that the roughness changed significantly and the ink molecules were gradually peeling off. This work highlighted the potential of quaternary ammonium-modified waste cooking oil for excellent removal of printing inks on the plastic surface.

Example of removing printing ink from plastic surface using quaternary ammonium-modified waste cooking oil.

The printing ink on the plastic surface greatly reduces the quality of recycled plastic products. In this work, quaternary ammonium-modified waste cooking oil (WCOQE) was fabricated, using waste cooking oil, epichlorohydrin and trimethylamine aqueous solution as raw materials, by ring-opening esterification and quaternary amination reaction. The synthesis conditions of WCOQE were optimized, and the structure and properties of WCOQE were characterized by FTIR, zeta potential and 1H NMR. Furthermore, WCOQE had excellent emulsifying performance, low kraft point, low CMC value, good foaming and stability, which could effectively reduce the surface tension of water, showing application potential in the field of plastic deinking. Importantly, compared with the waste cooking oil without deinking effect, the WCOQE had an excellent deinking performance on the ink on plastic surface, and the deinking efficiency could be improved by increasing the concentration of deinking agent, the deinking temperature, and prolonging the pre-soaking and stirring time. The results of AFM, EDS, optical photos and Leica microscope showed that the roughness changed significantly, and the ink molecules were gradually peeling off. This work highlighted the excellent potential of quaternary ammonium-modified waste cooking oil for the removal of printing inks on the plastic surface.

Catalytic reforming of polyethylene pyrolysis vapors to naphtha range hydrocarbons with low aromatic content over a high silica ZSM-5 zeolite.

In this study, the microwave-assisted pyrolysis coupled with ex-situ catalytic reforming of polyethylene for naphtha range hydrocarbons, with low aromatic content, was investigated. Experimental results revealed that ZSM-5 zeolites with low SiO2/Al2O3 ratios led to high aromatic selectivity, while an extremely high SiO2/Al2O3 ratio significantly reduced the aromatic selectivity. The high selectivity of C5-C12 hydrocarbons (98.9 %) with low selectivity of C5-C12 aromatics (28.5 %) was obtained over a high silica ZSM-5 zeolite at a pyrolysis temperature of 500 °C, catalytic cracking temperature of 460 °C, and a weight hourly space velocity of 7 h-1. The liquid oil produced was mainly composed of C5-C12 olefins that can be easily converted into paraffin-rich naphtha by hydrogenation or hydrogen transfer reactions as the feedstock for new plastic manufacturing. 8 cycles of regeneration-reaction cycles were carried out successfully with little change on the product distribution, showing the great potential for continuous production of low-aromatic liquid oil. Catalyst characterization showed that the catalyst deactivation was primarily caused by coke deposition (approximately 16.0 wt%) on the surface of the catalysts, and oxidative regeneration was able to recover most of the pore structure and acidity of the zeolite by effectively removing coke. This study provides a better understanding for the plastic-to-naphtha process and even for scale-up studies.

High-resolution particle size and shape analysis of the first Samarium nanoparticles biosynthesized from aqueous solutions via cyanobacteria Anabaena cylindrica.

Samarium (Sm) is one of the most sought-after rare earth metals. Price trends and dwindling resources are making recovery increasingly attractive. In this context, the use of cyanobacteria is highly promising. For Sm it was unclear whether Anabaena cylindrica produces particles through metabolically active Sm3+ uptake. High-resolution (HR) imaging now clearly demonstrates microbe generated biosynthesis of Sm nano-sized particles (Sm NPs) in vivo. Furthermore, a simple method to determine particle size and shape with high accuracy is presented. Digital image analysis with ImageJ of HR-TEMs is used to characterize Sm NPs revealing a nearly uniform local size distribution. Assuming round particles, the overall average area size is 135.5 nm2, resp. 11.9 nm diameter. In HR, where different cell sections of the same cell are averaged, the mean particle is smaller, 76.7 nm2 resp. 8.9 nm diameter. The reciprocal aspect ratio is 0.63. The Feret major axis ratio is calculated as shape factor, with 35% of the particles between 1.2 and 1.4. A roundness classification shows that 38% of particles are fairly round and 41% are very round. Consequently, A. cylindrica represents a suitable microorganism for possible Sm recovery and biosynthesis of roundish nano-sized particles.

Time-Dependent Size and Shape Evolution of Gold and Europium Nanoparticles from a Bioproducing Microorganism, a Cyanobacterium: A Digitally Supported High-Resolution Image Analysis.

Herein, the particle size distributions (PSDs) and shape analysis of in vivo bioproduced particles from aqueous Au3+ and Eu3+ solutions by the cyanobacterium Anabaena sp. are examined in detail at the nanoscale. Generally, biosynthesis is affected by numerous parameters. Therefore, it is challenging to find the key set points for generating tailored nanoparticles (NPs). PSDs and shape analysis of the Au and Eu-NPs were performed with ImageJ using high-resolution transmission electron microscopy (HR-TEM) images. As the HR-TEM image analysis reflects only a fraction of the detected NPs within the cells, additional PSDs of the complete cell were performed to determine the NP count and to evaluate the different accuracies. Furthermore, local PSDs were carried out at five randomly selected locations within a single cell to identify local hotspots or agglomerations. The PSDs show that particle size depends mainly on contact time, while the particle shape is hardly affected. The particles formed are distributed quite evenly within the cells. HR-PSDs for Au-NPs show an average equivalent circular diameter (ECD) of 8.4 nm (24 h) and 7.2 nm (51 h). In contrast, Eu-NPs preferably exhibit an average ECD of 10.6 nm (10 h) and 12.3 nm (244 h). Au-NPs are classified predominantly as "very round" with an average reciprocal aspect ratio (RAR) of ~0.9 and a Feret major axis ratio (FMR) of ~1.17. Eu-NPs mainly belong to the "rounded" class with a smaller RAR of ~0.6 and a FMR of ~1.3. These results show that an increase in contact time is not accompanied by an average particle growth for Au-NPs, but by a doubling of the particle number. Anabaena sp. is capable of biosorbing and bioreducing dissolved Au3+ and Eu3+ ions from aqueous solutions, generating nano-sized Au and Eu particles, respectively. Therefore, it is a low-cost, non-toxic and effective candidate for a rapid recovery of these sought-after metals via the bioproduction of NPs with defined sizes and shapes, providing a high potential for scale-up.

Preparation of amino-modified cellulose aerogels and adsorption on typical diclofenac sodium contaminant.

A new functional cellulose aerogel (Cell@PEI) with high adsorption efficiency was prepared for the removal of diclofenac sodium (DCF) by ammonification cross-linked polyethyleneimine (PEI) with the surface of cellulose. The fabricated Cell@PEI adsorbent was characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), etc. The results demonstrated that the Cell@PEI exhibited a distinct three-dimensional cell structure and was rich in functional groups, i.e., -OH, C = O, -NH2, and C = C. The Cell@PEI presented a stable crystal structure and large specific surface area (241.41 m2·g-1), which was approximately 42 times as much as bare cellulose aerogel (5.82 m2·g-1). In addition, a series of adsorption experiments showed that the adsorbent had good adsorption performance for DCF with a maximum adsorption capacity of 294.12 mg·g-1. Furthermore, the adsorption of DCF on Cell@PEI was well corresponded with the Langmuir isotherm and pseudo-second-order adsorption model. Thermodynamic study proved that adsorption was a spontaneous exothermic reaction. Moreover, the introduction of PEI into Cell@PEI aerogel enhanced the electrostatic interaction and hydrogen bonding, promoting DCF adsorption. Importantly, the Cell@PEI aerogel could be reused up to five times desorbed by NaOH (0.5 mol/L). Considering the above results, the fabricated aerogel material can be applied to remove organic pollutants.

Rapid degradation of p-arsanilic acid and simultaneous removal of the released arsenic species by Co-Fe@C activated peroxydisulfate process.

In this study, a bimetallic composite catalyst (Co-Fe@C) was fabricated with calcination at high temperature (800 °C) by using Co-MIL-101 (Fe) as the precursor. The characterization results showed that the resulted Co-Fe@C composite mainly consisted of carbon, FeCo alloys, Fe3O4, Co3O4 and FeO, and owned evident magnetism. In addition, the Co-Fe@C was employed to activate the peroxydisulfate (PDS) to degrade a representative organic pollutant (p-arsanilic acid, p-ASA) and the main factors were optimized, which involved 0.2 g L-1 of catalyst dosage, 1.0 g L-1 of PDS dosage and 5.0 of initial pH. Under the optimal condition, Co-Fe@C/PDS system could completely degrade p-ASA (20 mg L-1) in 5 min. In the Co-Fe@C/PDS system, SO4-·, Fe(IV) and ·OH were the main species during p-ASA degradation. Under the attack of these species, p-ASA was first decomposed into phenols and then transformed into the organics acids and finally mineralized into CO2 and H2O through a series of reactions like hydroxylation, dearsenification, deamination and benzene ring opening. Importantly, most of the released inorganic arsenic species (93.40%) could be efficiently adsorbed by the catalyst.