ABSTRACT
Efficient and accurate detection and providing early warning for citrus psyllids is crucial as they are the primary vector of citrus huanglongbing. In this study, we created a dataset comprising images of citrus psyllids in natural environments and proposed a lightweight detection model based on the spatial channel interaction. First, the YOLO-SCL model was based on the YOLOv5s architecture, which uses an efficient channel attention module to perform local channel attention on the inputs in the recursive gated convolutional modules to achieve a combination of global spatial and local channel interactions, improving the model's ability to express the features of the critical regions of small targets. Second, the lightweight design of the 21st layer C3 module in the neck network of the YOLO-SCL model and the small target feature information were retained to the maximum extent by deleting the two convolutional layers, whereas the number of parameters was reduced to improve the detection accuracy of the model. Third, with the detection accuracy of the YOLO-SCL model as the objective function, the black widow optimization algorithm was used to optimize the hyperparameters of the YOLO-SCL model, and the iterative mechanism of swarm intelligence was used to further improve the model performance. The experimental results showed that the YOLO-SCL model achieved a mAP@0.5 of 97.07% for citrus psyllids, which was 1.18% higher than that achieved using conventional YOLOv5s model. Meanwhile, the number of parameters and computation amount of the YOLO-SCL model are 6.92 M and 15.5 GFlops, respectively, which are 14.25% and 2.52% lower than those of the conventional YOLOv5s model. In addition, after using the black widow optimization algorithm to optimize the hyperparameters, the mAP@0.5 of the YOLO-SCL model for citrus psyllid improved to 97.18%, making it more suitable for the natural environments in which citrus psyllids are to be detected. The experimental results showed that the YOLO-SCL model has good detection accuracy for citrus psyllids, and the model was ported to the Jetson AGX Xavier edge computing platform, with an average processing time of 38.8 ms for a single-frame image and a power consumption of 16.85 W. This study provides a new technological solution for the safety of citrus production.
ABSTRACT
Objective.In protecting human from low-frequency (<100 kHz) exposure, an induced electric field strength is used as a physical quantity for assessment. However, the computational assessment suffers from a staircasing error because of the approximation of curved boundary discretized with cubic voxels. The international guidelines consider an additional reduction factor of 3 when setting the limit of external field strength computed from the permissible induced electric field. Here, a new method was proposed to reduce the staircasing error considering the tensor conductance in human modeling for low-frequency dosimetry.Approach.We proposed a tensor-based conductance model, which was developed on the basis of the filling ratio and the direction of the tissue interface to satisfy the electric field boundary condition and reduce staircasing errors in the target tissue of a voxel human model.Main results.The proposed model was validated using two-layer nonconcentric cylindrical and spherical models with different conductivity contrasts. A comparison of induced electric field strengths with solutions obtained using an analytical formula and finite element method simulation indicated that for a wide range of conductivity ratios, staircasing errors were reduced compared with a conventional scalar-potential finite-difference method. The induced electric field in a simple anatomical head model using our approach was in good agreement with finite element method for exposure to uniform magnetic field exposure and that from coil, simulating transcranial magnetic stimulation.Significance.The proposed tensor-conductance model demonstrated that the staircasing error in an inner target tissue of a voxel human body can be reduced. This finding can be used for the electromagnetic compliance assessment and dose evaluation in electric or magnetic stimulation at low frequencies.
Subject(s)
Artifacts , Radiometry , Humans , Electricity , Electric Conductivity , Transcranial Magnetic Stimulation , BrainABSTRACT
Target detection technology and variable-rate spraying technology are key technologies for achieving precise and efficient pesticide application. To address the issues of low efficiency and high working environment requirements in detecting tree information during variable spraying in orchards, this study has designed a variable spraying control system. The system employed a Kinect sensor to real-time detect the canopy volume of citrus trees and adjusted the duty cycle of solenoid valves by pulse width modulation to control the pesticide application. A canopy volume calculation method was proposed, and precision tests for volume detection were conducted, with a maximum relative error of 10.54% compared to manual measurements. A nozzle flow model was designed to determine the spray decision coefficient. When the duty cycle ranged from 30% to 90%, the correlation coefficient of the flow model exceeded 0.95, and the actual flow rate of the system was similar to the theoretical flow rate. Field experiments were conducted to evaluate the spraying effectiveness of the variable spraying control system based on the Kinect sensor. The experimental results indicated that the variable spraying control system demonstrated good consistency between the theoretical spray volume and the actual spray volume. In deposition tests, compared to constant-rate spraying, the droplets under the variable-rate mode based on canopy volume exhibited higher deposition density. Although the amount of droplet deposit and coverage slightly decreased, they still met the requirements for spraying operation quality. Additionally, the variable-rate spray mode achieved the goal of reducing pesticide use, with a maximum pesticide saving rate of 57.14%. This study demonstrates the feasibility of the Kinect sensor in guiding spraying operations and provides a reference for their application in plant protection operations.
ABSTRACT
Backgrounds: UAVs for crop protection hold significant potential for application in mountainous orchard areas in China. However, certain issues pertaining to UAV spraying need to be addressed for further technological advancement, aimed at enhancing crop protection efficiency and reducing pesticide usage. These challenges include the potential for droplet drift, limited capacity for pesticide solution. Consequently, efforts are required to overcome these limitations and optimize UAV spraying technology. Methods: In order to balance high deposition and low drift in plant protection UAV spraying, this study proposes a plant protection UAV spraying method. In order to study the operational effects of this spraying method, this study conducted a UAV spray and grid impact test to investigate the effects of different operational parameters on droplet deposition and drift. Meanwhile, a spray model was constructed using machine learning techniques to predict the spraying effect of this method. Results and discussion: This study investigated the droplet deposition rate and downwind drift rate on three types of citrus trees: traditional densely planted trees, dwarf trees, and hedged trees, considering different particle sizes and UAV flight altitudes. Analyzing the effect of increasing the grid on droplet coverage and deposition density for different tree forms. The findings demonstrated a significantly improved droplet deposition rate on dwarf and hedged citrus trees compared to traditional densely planted trees and adopting a fixed-height grid increased droplet coverage and deposition density for both the densely planted and trellised citrus trees, but had the opposite effect on dwarfed citrus trees. When using the grid system. Among the factors examined, the height of the sampling point exhibited the greatest influence on the droplet deposition rate, whereas UAV flight height and droplet particle size had no significant impact. The distance in relation to wind direction had the most substantial effect on droplet drift rate. In terms of predicting droplet drift rate, the BP neural network performed inadequately with a coefficient of determination of 0.88. Conversely, REGRESS, ELM, and RBFNN yielded similar and notably superior results with a coefficient of determination greater than 0.95. Notably, ELM demonstrated the smallest root mean square error.
ABSTRACT
Florescence information monitoring is essential for strengthening orchard management activities, such as flower thinning, fruit protection, and pest control. A lightweight object recognition model using cascade fusion YOLOv4-CF is proposed, which recognizes multi-type objects in their natural environments, such as citrus buds, citrus flowers, and gray mold. The proposed model has an excellent representation capability with an improved cascade fusion network and a multi-scale feature fusion block. Moreover, separable deep convolution blocks were employed to enhance object feature information and reduce model computation. Further, channel shuffling was used to address missing recognition in the dense distribution of object groups. Finally, an embedded sensing system for recognizing citrus flowers was designed by quantitatively applying the proposed YOLOv4-CF model to an FPGA platform. The mAP@.5 of citrus buds, citrus flowers, and gray mold obtained on the server using the proposed YOLOv4-CF model was 95.03%, and the model size of YOLOv4-CF + FPGA was 5.96 MB, which was 74.57% less than the YOLOv4-CF model. The FPGA side had a frame rate of 30 FPS; thus, the embedded sensing system could meet the demands of florescence information in real-time monitoring.
Subject(s)
Citrus , Algorithms , Computers , Flowers , FruitABSTRACT
Green citrus detection in citrus orchards provides reliable support for production management chains, such as fruit thinning, sunburn prevention and yield estimation. In this paper, we proposed a lightweight object detection YOLOv5-CS (Citrus Sort) model to realize object detection and the accurate counting of green citrus in the natural environment. First, we employ image rotation codes to improve the generalization ability of the model. Second, in the backbone, a convolutional layer is replaced by a convolutional block attention module, and a detection layer is embedded to improve the detection accuracy of the little citrus. Third, both the loss function CIoU (Complete Intersection over Union) and cosine annealing algorithm are used to get the better training effect of the model. Finally, our model is migrated and deployed to the AI (Artificial Intelligence) edge system. Furthermore, we apply the scene segmentation method using the "virtual region" to achieve accurate counting of the green citrus, thereby forming an embedded system of green citrus counting by edge computing. The results show that the mAP@.5 of the YOLOv5-CS model for green citrus was 98.23%, and the recall is 97.66%. The inference speed of YOLOv5-CS detecting a picture on the server is 0.017 s, and the inference speed on Nvidia Jetson Xavier NX is 0.037 s. The detection and counting frame rate of the AI edge system-side counting system is 28 FPS, which meets the counting requirements of green citrus.
Subject(s)
Artificial Intelligence , Citrus , Algorithms , Computers , FruitABSTRACT
For the requirement in container nursery culture that growing media should be achieved the appropriate degree compaction, this paper presents an experiment on the compaction dynamics of air-dried soil under repetitive drop shocks, as a preliminary step toward the mechanization of this compaction method. The drop height used to adjust the shock intensity included 2 mm, 4 mm, 5 mm and 6 mm. And the overall packing density of soil in a vertically stratified cylinder vessel and the local packing density in each layer were taken as indicators of soil compaction states. The stretched exponential function derived from KWW law than the empirical inverse-logarithmic function has been found to be more suitable for expressing the temporal evolution of soil compaction, according to the results of curve-fitting to test values of the overall and local density. It is inherent in this experimental configuration that the drop shock intensity even at a constant drop height varies with drop times, owing to the interaction between the soil packing itself and drop shocks caused by the combination of the packing and the container. But the function t/τf(t,H) is manifested as a straight line on the drop times t with the line slope related to the drop height H, so the soil compaction dynamics caused by its drop shocks and that under the condition with actively controlled intensity actually share the common relaxation law. In addition, the soil's one-dimensional distribution of local packing density showed a slight positive gradient as similar as monodisperse particles did.
Subject(s)
SoilABSTRACT
Citrus fruit detection can provide technical support for fine management and yield determination of citrus orchards. Accurate detection of citrus fruits in mountain orchards is challenging because of leaf occlusion and citrus fruit mutual occlusion of different fruits. This paper presents a citrus detection task that combines UAV data collection, AI embedded device, and target detection algorithm. The system used a small unmanned aerial vehicle equipped with a camera to take full-scale pictures of citrus trees; at the same time, we extended the state-of-the-art model target detection algorithm, added the attention mechanism and adaptive fusion feature method, improved the model's performance; to facilitate the deployment of the model, we used the pruning method to reduce the amount of model calculation and parameters. The improved target detection algorithm is ported to the edge computing end to detect the data collected by the unmanned aerial vehicle. The experiment was performed on the self-made citrus dataset, the detection accuracy was 93.32%, and the processing speed at the edge computing device was 180 ms/frame. This method is suitable for citrus detection tasks in the mountainous orchard environment, and it can help fruit growers to estimate their yield.