Strategies for developing 3D printed ovarian model for restoring fertility.

Ovaries play a crucial role in the regulation of numerous essential processes that occur within the intricate framework of female physiology. They are entrusted with the responsibility of both generating a new life and orchestrating a delicate hormonal symphony. Understanding their functioning is crucial for gaining insight into the complexities of reproduction, health, and fertility. In addition, ovaries secrete hormones that are crucial for both secondary sexual characteristics and the maintenance of overall health. A three-dimensional (3D) prosthetic ovary has the potential to restore ovarian function and preserve fertility in younger females who have undergone ovariectomies or are afflicted with ovarian malfunction. Clinical studies have not yet commenced, and the production of 3D ovarian tissue for human implantation is still in the research phase. The main challenges faced while creating a 3D ovary for in vivo implantation include sustenance of ovarian follicles, achieving vascular infiltration into the host tissue, and restoring hormone circulation. The complex ovarian microenvironment that is compartmentalized and rigid makes the biomimicking of the 3D ovary challenging in terms of biomaterial selection and bioink composition. The successful restoration of these properties in animal models has led to expectations for the development of human ovaries for implantation. This review article summarizes and evaluates the optimal 3D models of ovarian structures and their safety and efficacy concerns to provide concrete suggestions for future research.

Three Dimensional Bioprinting for Hepatic Tissue Engineering: From In Vitro Models to Clinical Applications.

Fabrication of functional organs is the holy grail of tissue engineering and the possibilities of repairing a partial or complete liver to treat chronic liver disorders are discussed in this review. Liver is the largest gland in the human body and plays a responsible role in majority of metabolic function and processes. Chronic liver disease is one of the leading causes of death globally and the current treatment strategy of organ transplantation holds its own demerits. Hence there is a need to develop an in vitro liver model that mimics the native microenvironment. The developed model should be a reliable to understand the pathogenesis, screen drugs and assist to repair and replace the damaged liver. The three-dimensional bioprinting is a promising technology that recreates in vivo alike in vitro model for transplantation, which is the goal of tissue engineers. The technology has great potential due to its precise control and its ability to homogeneously distribute cells on all layers in a complex structure. This review gives an overview of liver tissue engineering with a special focus on 3D bioprinting and bioinks for liver disease modelling and drug screening.

Diverse Applications of Three-Dimensional Printing in Biomedical Engineering: A Review.

A three-dimensional (3D) printing is a robotically controlled state-of-the-art technology that is promising for all branches of engineering with a meritorious emphasis to biomedical engineering. The purpose of 3D printing (3DP) is to create exact superstructures without any framework in a brief period with high reproducibility to create intricate and complex patient-tailored structures for organ regeneration, drug delivery, imaging processes, designing personalized dose-specific tablets, developing 3D models of organs to plan surgery and to understand the pathology of disease, manufacturing cost-effective surgical tools, and fabricating implants and organ substitute devices for prolonging the lives of patients, etc. The formulation of bioinks and programmed G codes help to obtain precise 3D structures, which determines the stability and functioning of the 3D-printed structures. Three-dimensional printing for medical applications is ambitious and challenging but made possible with the culmination of research expertise from various fields. Exploring and expanding 3DP for biomedical and clinical applications can be life-saving solutions. The 3D printers are cost-effective and eco-friendly, as they do not release any toxic pollutants or waste materials that pollute the environment. The sampling requirements and processing parameters are amenable, which further eases the production. This review highlights the role of 3D printers in the health care sector, focusing on their roles in tablet development, imaging techniques, disease model development, and tissue regeneration.

Quantification of circulating plasma cell free DNA fragments in patients with oral cancer and precancer.

PURPOSE: Study was aimed to quantify plasma level of total, short and long fragmented cell-free DNA (cfDNA) along with DNA integrity in patients with oral cancer, oral precancer and tobacco users without lesions and normal controls. In addition, study evaluated the correlation of cfDNA with clinicopathologic parameters of oral cancer. METHODOLOGY: Plasma samples were collected preoperatively from 44 patients with oral cancer, 40 patients with oral precancer, 40 tobacco users without any oral lesion and 40 healthy controls without any tobacco habit. cfDNA extraction was carried out from the plasma followed by quantitative and qualitative assessment of extracted DNA. Quantity of short and long fragmented DNA was assessed by using PCR with two different primer sets for the beta-actin gene, amplifying short (102 bp) and long (253 bp) products. The DNA integrity index was measured by calculating the ratio of quantity of long fragmented to short fragmented DNA. All quantitative cfDNA parameters were statistically analyzed to verify their correlation with clinicopathologic parameters. RESULTS: Results showed that total cfDNA level, short and long fragmented cfDNA concentration and DNA integrity was significantly higher in oral cancer group as compare to other (p=0.0001). Study demonstrated that there is no correlation total, short and long cfDNA and DNA integrity with tumor size and histologic type or grading. But positive correlation of total cfDNA was found with nodal metastasis (p=0.001) and clinical stages (p=0.006). CONCLUSION: Quantitative analysis of total cfDNA may be applied as a screening marker for early detection of precancer and cancer as well as for prognostication of oral cancer. Additionally, plasma levels of short and long fragmented cfDNA and DNA integrity index can be applied for early detection of oral cancer.

Actinomyces: a deceptive infection of oral cavity.

Actinomycosis is an infrequent chronic infection regarded as the most misdiagnosed disease by experienced clinicians. The Office of Rare Diseases at the National Institute of Health has also listed this disease as a "rare disease." This article presents a case report of actinomycosis of the alveolus with unusual clinical features but a successful resolution. It also states the importance of biopsy of deceptive inflammatory lesions that do not respond or recur after conventional treatment modalities.

Gutkha Addiction: Nicotine Dependence or a Conditioned Reflex?

BACKGROUND: A pre-packaged mixture of areca nut, tobacco, slaked lime, catechu, and flavoring agents is popularly known as Gutkha. Aim of study is to analyze the addiction biology of Gutkha chewing and to assess efficacy of a cessation program based on nicotine replacement therapy (NRT). MATERIALS AND METHODS: Patterns of addiction of 400 Gutkha chewers were analyzed with a questionnaire-based survey. Urine cotinine levels of 60 subjects undergoing NRT were periodically estimated using gas chromatography. RESULTS: Mean urine cotinine levels of relapse and relapse-free cases were 5800.38 µg/g of creatine and 5622.16 µg/g of creatine. The difference was not found to be statistically significant. A 83.3% of the subjects associated their chewing habit with day to day activities. Overall relapse rate was found to be 79%. The most common reported reason for relapse was unacceptable taste and form of nicotine chewing gums. CONCLUSION: Repetitive coexistence in time of an indifferent act and the act of chewing Gutkha where, the act of chewing is almost always preceded by the indifferent act sets in a conditioned reflex. Gutkha addiction can be considered as a form of conditioned reflex, rather than actual craving for nicotine.

Quadruplex-duplex competition in the nuclease hypersensitive element of human c-myc promoter: C to T mutation in C-rich strand enhances duplex association.

The nuclease hypersensitive element NHE III(I) is an important anti-cancer target as the transcription of oncogene c-myc is largely regulated by it. It has been postulated that regulatory control is mediated by G-quadruplex formation in the NHE anti-sense strand through a competition between the duplex and the quadruplex states. A mutation in the NHE has been implicated in cancer. In this study, the reported mutation has been characterized vis-a-vis the kinetics of i-tetraplex formation (in the sense strand) and its effect on duplex formation. We found that i-tetraplex formation was destabilized by approximately 1.4 kcal/mol (DeltaDeltaG at 20 degrees C, pH 5.8). Observed hysteresis allowed us to analyze the kinetics of folding for the mutant (M3). Though we observed higher association (DeltaEon approximately -23.4 kcal/mol) and dissociation (DeltaEoff approximately 22.1 kcal/mol) activation energies (at pH 5.3) for the wild-type (P1) tetraplex folding, the kinetics of folding and unfolding for M3 was somewhat faster at pH 5.3 and 5.8. Interestingly, Surface plasmon resonance (BIAcore) analysis of hybridization at pH 6.6 indicated a higher association constant for M3 (approximately 22.5 x 10(4)M(-1)s(-1)) than P1 (approximately 3.2 x 10(4)M(-1)s(-1)). The equilibrium dissociation constants also indicated favorable duplex association for M3 (approximately 22.2 and approximately 190.6 nM for M3 and P1, respectively). We envisage that the increased affinity for the duplex state due to the mutation could play a functional role in the aberrant regulation of c-myc.

Thermodynamics of i-tetraplex formation in the nuclease hypersensitive element of human c-myc promoter.

More than 85% of c-myc transcription is controlled by the nuclease hypersensitive element III(1) upstream of the P1 promoter of this oncogene. The purine-rich sequence in the anti-sense strand forms a G-quadruplex, which has been recently implicated in colorectal cancer, and is proposed as a silencer element [Proc. Natl. Acad. Sci. USA 101 (2004) 6140]. This prompted us to characterize the thermodynamics and proton/counterion effect of the complementary pyrimidine-rich sequence, which forms a C-tetraplex. We report the thermodynamic parameters for folding of the pyrimidine-rich DNA fragment from this region into a C-tetraplex. At 20 degrees C, we observed a DeltaG of -10.36+/-0.13kcalmol(-1) with favorable enthalpy (DeltaH=75.99+/-0.99kcalmol(-1)) and unfavorable entropy (TDeltaS=65.63+/-0.88 kcalmol(-1)) at pH 5.3 in 20mM NaCl for tetraplex folding. Similar characteristic stabilizing enthalpy and destabilizing entropy were observed at other pH and ionic strengths. Folding was induced by uptake of about two to three protons per mole of tetraplex while a marginal (0.5-1mol/mol) counterion uptake was observed. In the context of current understanding of c-myc transcription we envisage a role of the i-motif in remodeling the G-quadruplex silencer.