Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 30
Filter
Add more filters










Publication year range
1.
ACS Nano ; 17(11): 9694-9747, 2023 Jun 13.
Article in English | MEDLINE | ID: mdl-37219929

ABSTRACT

Two-dimensional (2D) material research is rapidly evolving to broaden the spectrum of emergent 2D systems. Here, we review recent advances in the theory, synthesis, characterization, device, and quantum physics of 2D materials and their heterostructures. First, we shed insight into modeling of defects and intercalants, focusing on their formation pathways and strategic functionalities. We also review machine learning for synthesis and sensing applications of 2D materials. In addition, we highlight important development in the synthesis, processing, and characterization of various 2D materials (e.g., MXnenes, magnetic compounds, epitaxial layers, low-symmetry crystals, etc.) and discuss oxidation and strain gradient engineering in 2D materials. Next, we discuss the optical and phonon properties of 2D materials controlled by material inhomogeneity and give examples of multidimensional imaging and biosensing equipped with machine learning analysis based on 2D platforms. We then provide updates on mix-dimensional heterostructures using 2D building blocks for next-generation logic/memory devices and the quantum anomalous Hall devices of high-quality magnetic topological insulators, followed by advances in small twist-angle homojunctions and their exciting quantum transport. Finally, we provide the perspectives and future work on several topics mentioned in this review.

2.
J Phys Chem A ; 127(12): 2671-2687, 2023 Mar 30.
Article in English | MEDLINE | ID: mdl-36921095

ABSTRACT

Through molecular mechanics using the force field along with the quantum dynamical aspect of mechanically interlocked compounds, rotaxanes (defined as macromolecular rings that are threaded on a dumbbell-shaped axle molecule) are investigated with advanced quantum mechanical methods, including the atom-centered density matrix propagation simulation technique, at different temperatures like 300, 500, 700, 900, 2000, and 2500 K for 1.2 ps. Ab initio molecular dynamics simulation is carried out. In addition to, we investigate the noncovalent interaction present in the rotaxane compound 2R-D-2PF6 with the help of reduced density gradient, average reduced density gradient, density overlap region indicator, and interaction region indicator as well as Hirshfeld surface analyses. Furthermore, the stability of 2R-D-2PF6 at room temperature and higher temperatures is elucidated by analyzing the thermal fluctuation index through a dynamic process. In order to check the optical behavior of our selected rotaxane compound, an evaluation of the electronic dipole moment, static and frequency-dependent average polarizability, and first- and second-order hyperpolarizability is carried out. The rotaxane compound shows very promising linear and nonlinear optical responses, which indicates its utility as a very good optical material. The calculation of the time-dependent density-functional theory highlights the broad absorption band of rotaxane spanning the UV-visible domain. Therefore, we also unravel that this can tap into solar radiation or harnessing of solar energy.

3.
Phys Chem Chem Phys ; 25(7): 5592-5601, 2023 Feb 15.
Article in English | MEDLINE | ID: mdl-36727265

ABSTRACT

The nuclear waste problem is one of the main interests of rare earth and actinide element chemistry. Studies of actinide-containing compounds are at the frontier of the applications of current theoretical methods due to the need to consider relativistic effects and approximations to the Dirac equation in them. Here, we employ four-component relativistic quantum calculations and scalar approximations to understand the contribution of f-type atomic orbitals in the chemical bonding of actinides (Ac) to organic ligands. We studied the relativistic quantum structure of an isostructural family made of Plutonium (Pu), Americium (Am), Californium (Cf), and Berkelium (Bk) atoms with the redox-active model ligand DOPO (2,4,6,8-tetra-tert-butyl-1-oxo-1H-phenoxazin-9-olate). Crystallographic structures were available to validate our calculations for all mentioned elements except for Cf. In short, state-of-the-art relativistic calculations were performed at different levels of theory to investigate the influence of relativistic and electron correlation effects on geometrical structures and bonding energies of Ac-DOPO3 complexes (Ac = Pu, Am, Cf, and Bk): (1) the scalar (sc) and spin-orbit (so) relativistic zeroth order regular approximation (ZORA) within the hybrid density functional theory (DFT) and (2) the four-component Dirac equation with both the Dirac-Hartree-Fock (4c-DHF) and Lévy-Leblond (LL) Hamiltonians. We show that sr- and so-ZORA-DFT could be used as efficient theoretical models to first approximate the geometry and electronic properties of actinides which are difficult to synthesize or characterize, but knowing that the higher levels of theory, like the 4c-DHF, give closer results to experiments. We also performed spin-free 4c calculations of geometric parameters for the Americium and Berkelium compounds. To the best of our knowledge, this is the first time that these kinds of large actinide compounds (the largest contains 67 atoms and 421 electrons) have been studied with highly accurate four-component methods (all-electron calculations with 6131 basis functions for the largest compound). We show that relativistic effects play a key role in the contribution of f-type atomic orbitals to the frontier orbitals of Ac-DOPO3 complexes. The analysis of the results obtained applying different theoretical schemes to calculate bonding energies is also given.

4.
J Am Chem Soc ; 145(8): 4589-4600, 2023 Mar 01.
Article in English | MEDLINE | ID: mdl-36795004

ABSTRACT

Metal-organic frameworks (MOFs) that display photoredox activity are attractive materials for sustainable photocatalysis. The ability to tune both their pore sizes and electronic structures based solely on the choice of the building blocks makes them amenable for systematic studies based on physical organic and reticular chemistry principles with high degrees of synthetic control. Here, we present a library of eleven isoreticular and multivariate (MTV) photoredox-active MOFs, UCFMOF-n, and UCFMTV-n-x% with a formula Ti6O9[links]3, where the links are linear oligo-p-arylene dicarboxylates with n number of p-arylene rings and x mol% of multivariate links containing electron-donating groups (EDGs). The average and local structures of UCFMOFs were elucidated from advanced powder X-ray diffraction (XRD) and total scattering tools, consisting of parallel arrangements of one-dimensional (1D) [Ti6O9(CO2)6]∞ nanowires connected through the oligo-arylene links with the topology of the edge-2-transitive rod-packed hex net. Preparation of an MTV library of UCFMOFs with varying link sizes and amine EDG functionalization enabled us to study both their steric (pore size) and electronic (highest occupied molecular orbital-lowest unoccupied molecular orbital, HOMO-LUMO, gap) effects on the substrate adsorption and photoredox transformation of benzyl alcohol. The observed relationship between the substrate uptake and reaction kinetics with the molecular traits of the links indicates that longer links, as well as increased EDG functionalization, exhibit impressive photocatalytic rates, outperforming MIL-125 by almost 20-fold. Our studies relating photocatalytic activity with pore size and electronic functionalization demonstrate how these are important parameters to consider when designing new MOF photocatalysts.

5.
iScience ; 25(1): 103700, 2022 Jan 21.
Article in English | MEDLINE | ID: mdl-35036879

ABSTRACT

Negative emissions technologies will play a critical role in limiting global warming to sustainable levels. Electrocatalytic and/or photocatalytic CO2 reduction will likely play an important role in this field moving forward, but efficient, selective catalyst materials are needed to enable the widespread adoption of these processes. The rational design of such materials is highly challenging, however, due to the complexity of the reactions involved as well as the large number of structural variables which can influence behavior at heterogeneous interfaces. Currently, there is a significant disconnect between the complexity of materials systems that can be handled experimentally and those that can be modeled theoretically with appropriate rigor and bridging these gaps would greatly accelerate advancements in the field of Negative Emissions Science (NES). Here, we present a perspective on how these gaps between materials design/synthesis, characterization, and theory can be resolved, enabling the rational development of improved materials for CO2 conversion and other NES applications.

6.
J Am Chem Soc ; 143(15): 5951-5957, 2021 Apr 21.
Article in English | MEDLINE | ID: mdl-33822596

ABSTRACT

Solid-state thermoelastic behavior-a sudden exertion of an expansive or contractive physical force following a temperature change and phase transition in a solid-state compound-is rare in organic crystals, few are reversible systems, and most of these are limited to a dozen or so cycles before the crystal degrades or they reverse slowly over the course of many minutes or even hours. Comparable to thermosalience, wherein crystal phase changes induce energetic jumping, thermomorphism produces physical work via consistent and near-instantaneous predictable directional force. In this work, we show a fully reversible thermomorphic actuator that is stable at room temperature for multiple years and is capable of actuation for more than 200 cycles at near-ambient temperature. Specifically, the crystals shrink to 90% of their original length instantaneously upon heating beyond 45 °C and expand back to their original length upon cooling below 35 °C. Furthermore, the phase transition occurs instantaneously, with little obvious hysteresis, allowing us to create real-time actuating thermal fuses that cycle between on and off rapidly.

7.
Nano Lett ; 20(9): 6336-6343, 2020 Sep 09.
Article in English | MEDLINE | ID: mdl-32787169

ABSTRACT

We investigate the effect of lattice disorder and local correlation effects in finite and periodic silicene structures caused by carbon doping using first-principles calculations. For both finite and periodic silicene structures, the electronic properties of carbon-doped monolayers are dramatically changed by controlling the doping sites in the structures, which is related to the amount of disorder introduced in the lattice and electron-electron correlation effects. By changing the position of the carbon dopants, we found that a Mott-Anderson transition is achieved. Moreover, the band gap is determined by the level of lattice disorder and electronic correlation effects. Finally, these structures are ferromagnetic even under disorder which has potential applications in Si-based nanoelectronics, such as field-effect transistors (FETs).

8.
ACS Appl Mater Interfaces ; 12(17): 19393-19401, 2020 Apr 29.
Article in English | MEDLINE | ID: mdl-32109048

ABSTRACT

In a conventional lithium-ion battery (LIB), graphite forms the negative electrode or anode. Although Na is considered one of the most attractive alternatives to Li, achieving reversible Na intercalation within graphitic materials under ambient conditions remains a challenge. More efficient carbonaceous anode materials are desired for developing advanced LIBs and beyond Li-ion battery technologies. We hypothesized that two-dimensional materials with distinct surface electronic properties create conditions for ion insertion into few-layer graphene (FLG) anodes. This is because modification of the electrode/electrolyte interface potentially modifies the energetics and mechanisms of ion intercalation in the thin bulk of FLG. Through first-principles calculations; we show that the electronic, structural, and thermodynamic properties of FLG anodes can be fine-tuned by a covalent heteroatom substitution at the uppermost layer of the FLG electrode, or by interfacing FLG with a single-side fluorinated graphene or a Janus-type hydrofluorographene monolayer. When suitably interfaced with the 2D surface modifier, FLG exhibits favorable thermodynamics for the Li+, Na+, and K+ intercalation. Remarkably, the reversible binding of Na within carbon layers becomes thermodynamically allowed, and a large storage capacity can be achieved for the Na intercalated modified FLG anodes. The origin of charge-transfer promoted electronic tunability of modified FLGs is rationalized by various theoretical methods.

9.
Chem Sci ; 12(2): 559-568, 2020 Oct 08.
Article in English | MEDLINE | ID: mdl-34163786

ABSTRACT

Alkali ion intercalation is fundamental to battery technologies for a wide spectrum of potential applications that permeate our modern lifestyle, including portable electronics, electric vehicles, and the electric grid. In spite of its importance, the Nernstian nature of the charge transfer process describing lithiation of carbon has not been described previously. Here we use the ultrathin few-layer graphene (FLG) with micron-sized grains as a powerful platform for exploring intercalation and co-intercalation mechanisms of alkali ions with high versatility. Using voltammetric and chronoamperometric methods and bolstered by density functional theory (DFT) calculations, we show the kinetically facile co-intercalation of Li+ and K+ within an ultrathin FLG electrode. While changes in the solution concentration of Li+ lead to a displacement of the staging voltammetric signature with characteristic slopes ca. 54-58 mV per decade, modification of the K+/Li+ ratio in the electrolyte leads to distinct shifts in the voltammetric peaks for (de)intercalation, with a changing slope as low as ca. 30 mV per decade. Bulk ion diffusion coefficients in the carbon host, as measured using the potentiometric intermittent titration technique (PITT) were similarly sensitive to solution composition. DFT results showed that co-intercalation of Li+ and K+ within the same layer in FLG can form thermodynamically favorable systems. Calculated binding energies for co-intercalation systems increased with respect to the area of Li+-only domains and decreased with respect to the concentration of -K-Li- phases. While previous studies of co-intercalation on a graphitic anode typically focus on co-intercalation of solvents and one particular alkali ion, this is to the best of our knowledge the first study elucidating the intercalation behavior of two monovalent alkali ions. This study establishes ultrathin graphitic electrodes as an enabling electroanalytical platform to uncover thermodynamic and kinetic processes of ion intercalation with high versatility.

10.
Nanoscale ; 11(39): 18449-18463, 2019 Oct 10.
Article in English | MEDLINE | ID: mdl-31576874

ABSTRACT

Black phosphorus (b-P) is an allotrope of phosphorus whose properties have attracted great attention. In contrast to other 2D compounds, or pristine b-P, the properties of b-P alloys have yet to be explored. In this report, we present a detailed study on the Raman spectra and on the temperature dependence of the electrical transport properties of As-doped black phosphorus (b-AsP) for an As fraction x = 0.25. The observed complex Raman spectra were interpreted with the support of Density Functional Theory (DFT) calculations since each original mode splits in three due to P-P, P-As, and As-As bonds. Field-effect transistors (FET) fabricated from few-layered b-AsP exfoliated onto Si/SiO2 substrates exhibit hole-doped like conduction with a room temperature ON/OFF current ratio of ∼103 and an intrinsic field-effect mobility approaching ∼300 cm2 V-1 s-1 at 300 K which increases up to 600 cm2 V-1 s-1 at 100 K when measured via a 4-terminal method. Remarkably, these values are comparable to, or higher, than those initially reported for pristine b-P, indicating that this level of As doping is not detrimental to its transport properties. The ON to OFF current ratio is observed to increase up to 105 at 4 K. At high gate voltages b-AsP displays metallic behavior with the resistivity decreasing with decreasing temperature and saturating below T ∼100 K, indicating a gate-induced insulator to metal transition. Similarly to pristine b-P, its transport properties reveal a high anisotropy between armchair (AC) and zig-zag (ZZ) directions. Electronic band structure computed through periodic dispersion-corrected hybrid Density Functional Theory (DFT) indicate close proximity between the Fermi level and the top of the valence band(s) thus explaining its hole doped character. Our study shows that b-AsP has potential for optoelectronics applications that benefit from its anisotropic character and the ability to tune its band gap as a function of the number of layers and As content.

11.
Nat Commun ; 10(1): 3091, 2019 Jul 12.
Article in English | MEDLINE | ID: mdl-31300653

ABSTRACT

Electrochemical cells that utilize lithium and sodium anodes are under active study for their potential to enable high-energy batteries. Liquid and solid polymer electrolytes based on ether chemistry are among the most promising choices for rechargeable lithium and sodium batteries. However, uncontrolled anionic polymerization of these electrolytes at low anode potentials and oxidative degradation at working potentials of the most interesting cathode chemistries have led to a quite concession in the field that solid-state or flexible batteries based on polymer electrolytes can only be achieved in cells based on low- or moderate-voltage cathodes. Here, we show that cationic chain transfer agents can prevent degradation of ether electrolytes by arresting uncontrolled polymer growth at the anode. We also report that cathode electrolyte interphases composed of preformed anionic polymers and supramolecules provide a fundamental strategy for extending the high voltage stability of ether-based electrolytes to potentials well above conventionally accepted limits.

12.
Phys Chem Chem Phys ; 21(17): 8785-8796, 2019 Apr 24.
Article in English | MEDLINE | ID: mdl-30968866

ABSTRACT

Covalent-organic frameworks (COFs) have emerged as an important class of nano-porous crystalline materials with many potential applications. They are intriguing platforms for the design of porous skeletons with special functionality at the molecular level. However, despite their extraordinary structural tunability, it is difficult to control their electronic properties, thus hindering the potential implementation in electronic devices. A new family of nanoporous materials, COFs intercalated with first row transition metals, is proposed to address this fundamental drawback - the lack of electronic tunability. Using first-principles calculations, we designed 31 new COF materials in silico by intercalating all of the first row transition metals (TMs) with boroxine-linked and triazine-linked COFs: COF-TM-x (where TM = Sc-Zn and x = 3-5). We investigated their structure and electronic properties. Specifically, we predict that the band gap and density of states (DOS) of COFs can be controlled by intercalating first row transition metal atoms (TM: Sc-Zn) and fine tuned by the concentration of TMs. We also found that the d-subshell electron density of the TMs plays a main role in determining the electronic properties of the COFs. Thus intercalated-COFs provide a new strategy to control the electronic properties of materials within a porous network. This work opens up new avenues for the design of TM-intercalated materials with promising future applications in nanoporous electronic devices, where a high surface area coupled with fine-tuned electronic properties is desired.

13.
Anal Chem ; 91(8): 5184-5190, 2019 04 16.
Article in English | MEDLINE | ID: mdl-30884946

ABSTRACT

Hepatocytes help to maintain glucose homeostasis in response to a variety of signals, including pancreatic hormones such as insulin. Insulin is released from the pancreas with variable dynamics, yet the role that these play in regulating glucose metabolism in the liver is still unclear. In this study, a modular microfluidic system was developed to quantitatively measure the effect of insulin dynamics on glucose consumption by a human hepatocarcinoma cell line, HepG2. A microfluidic bioreactor that contained 106 HepG2 cells was cultured for up to 10 days in an incubator. For glucose consumption experiments, the bioreactor was removed from the incubator and connected with reagents for an enzymatic glucose assay. The mixed components were then delivered into a droplet-based microfluidic system where the intensity of the fluorescent product of the enzyme assay was used to quantify the glucose concentration. By optimizing the mixing time of the reagents, the dynamic range of the enzymatic assay was adjusted to 0-12 mM glucose and had a time resolution of 96 ± 12 s. The system was used to observe rapid changes in insulin-induced glucose consumption from HepG2 cells. This assay format is versatile and can be expanded to measure a variety of hepatic metabolites, such as lactate, pyruvate, or ketone bodies, which will enable the correlation of pancreatic hormone dynamics to liver metabolism.


Subject(s)
Bioreactors , Enzyme Assays , Glucose Oxidase/metabolism , Glucose , Horseradish Peroxidase/metabolism , Microfluidic Analytical Techniques , Glucose/analysis , Glucose/metabolism , Hep G2 Cells , Humans , Particle Size , Surface Properties , Tumor Cells, Cultured
14.
J Am Chem Soc ; 141(6): 2356-2366, 2019 Feb 13.
Article in English | MEDLINE | ID: mdl-30714372

ABSTRACT

An isostructural family of f-element compounds (Ce, Nd, Sm, Gd; Am, Bk, Cf) of the redox-active dioxophenoxazine ligand (DOPOq; DOPO = 2,4,6,8-tetra- tert-butyl-1-oxo-1 H-phenoxazin-9-olate) was prepared. This family, of the form M(DOPOq)3, represents the first nonaqueous isostructural series, including the later actinides berkelium and californium. The lanthanide derivatives were fully characterized using 1H NMR spectroscopy and SQUID magnetometry, while all species were structurally characterized by X-ray crystallography and electronic absorption spectroscopy. In order to probe the electronic structure of this new family, CASSCF calculations were performed and revealed these systems to be largely ionic in contrast to previous studies, where berkelium and californium typically have a small degree of covalent character. To validate the zeroth order regular approximation (ZORA) method, the same CASSCF analysis using experimental structures versus UDFT-ZORA optimized structures does not exhibit sizable changes in bonding patterns. This shows that UDFT-ZORA combined with CASSCF could be a useful first approximation to predict and investigate the structure and electronic properties of actinides and lanthanides that are difficult to synthesize or characterize.

15.
J Am Chem Soc ; 140(42): 13599-13603, 2018 Oct 24.
Article in English | MEDLINE | ID: mdl-30299954

ABSTRACT

Advancing beyond Li-ion batteries requires translating the beneficial characteristics of Li+ electrodes to attractive, yet incipient, candidates such as those based on K+ intercalation. Here, we use ultrathin few-layer graphene (FLG) electrodes as a model interface to show a dramatic enhancement of K+ intercalation performance through a simple conditioning of the solid-electrolyte interphase (SEI) in a Li+ containing electrolyte. Unlike the substantial plating occurring in K+ containing electrolytes, we found that a Li+ based SEI enabled efficient K+ intercalation with discrete staging-type phase transitions observed via cyclic voltammetry at scan rates up to 100 mVs-1 and confirmed as ion-intercalation processes through in situ Raman spectroscopy. The resulting interface yielded fast charge-discharge rates up to ∼360C (1C is fully discharge in 1 h) and remarkable long-term cycling stability at 10C for 1000 cycles. This SEI promoted the transport of K+ as verified via mass spectrometric depth profiling. This work introduces a convenient strategy for improving the performance of ion intercalation electrodes toward a practical K-ion battery and FLG electrodes as a powerful analytical platform for evaluating fundamental aspects of ion intercalation.

16.
Phys Chem Chem Phys ; 20(37): 24058-24064, 2018 Sep 26.
Article in English | MEDLINE | ID: mdl-30204173

ABSTRACT

The tetraaza [CoIIN4H]2+ complex (1) is remarkable for its ability to selectively reduce CO2 to CO with 45% Faradaic efficiency and a CO to H2 ratio of 3 : 2. We employ density functional theory (DFT) to determine the reasons behind the unusual catalytic properties of 1 and the most likely mechanism for CO2 reduction. The selectivity for CO2 over proton reduction is explained by analyzing the catalyst's affinity for the possible ligands present under typical reaction conditions: acetonitrile, water, CO2, and bicarbonate. After reduction of the catalyst by two electrons, formation of [CoIN4H]+-CO2- is strongly favored. Based on thermodynamic and kinetic data, we establish that the only likely route for producing CO from here consists of a protonation step to yield [CoIN4H]+-CO2H, followed by reaction with CO2 to form [CoIIN4H]2+-CO and bicarbonate. This conclusion corroborates the idea of a direct role of CO2 as a Lewis acid to assist in C-O bond dissociation, a conjecture put forward by other authors to explain recent experimental observations. The pathway to formic acid is predicted to be forbidden by high activation barriers, in accordance with the products that are known to be generated by 1. Calculated physical observables such as standard reduction potentials and the turnover frequency for our proposed catalytic cycle are in agreement with available experimental data reported in the literature. The mechanism also makes a prediction that may be experimentally verified: that the rate of CO formation should increase linearly with the partial pressure of CO2.

17.
Chem Commun (Camb) ; 54(50): 6947-6950, 2018 Jun 19.
Article in English | MEDLINE | ID: mdl-29872775

ABSTRACT

We present a family of covalent organic frameworks that have been functionalized with oligo-(ethylene oxide) chains of varying lengths. Because of the open structure of the COFs, the side chains do not interfere with their crystallization obtaining materials with predictable crystal structure. The difference in length of the side-chains allowed for the determination of amphidynamic behaviour with the use of 13C solid-state NMR relaxation methods. Computational calculations further contribute to understanding the atomistic dynamic behaviour of the different atoms. This study demonstrates the ability to design complex behaviour in organic crystals.

18.
ACS Appl Mater Interfaces ; 10(15): 13244-13251, 2018 Apr 18.
Article in English | MEDLINE | ID: mdl-29580051

ABSTRACT

In this article, we present an approach for the generalization of adsorption of light gases in porous materials. This new theory goes beyond Langmuir and Brunauer-Emmett-Teller theories, which are the standard approaches that have a limited application to crystalline porous materials by their unphysical assumptions on the amount of possible adsorption layers. The derivation of a more general equation for any crystalline porous framework is presented, restricted multilayer theory. Our approach allows the determination of gas uptake considering only geometrical constraints of the porous framework and the interaction energy of the guest molecule with the framework. On the basis of this theory, we calculated optimal values for the adsorption enthalpy at different temperatures and pressures. We also present the use of this theory to determine the optimal linker length for a topologically equivalent framework series. We validate this theoretical approach by applying it to metal-organic frameworks (MOFs) and show that it reproduces the experimental results for seven different reported materials. We obtained the universal equation for the optimal linker length, given the topology of a porous framework. This work applied the general equation to MOFs and H2 to create energy-storage materials; however, this theory can be applied to other crystalline porous materials and light gases, which opens the possibility of designing the next generations of energy-storage materials by first considering only the geometrical constraints of the porous materials.

19.
ACS Nano ; 12(3): 2980-2990, 2018 03 27.
Article in English | MEDLINE | ID: mdl-29444401

ABSTRACT

The electronic properties and extreme thinness of graphene make it an attractive platform for exploring electrochemical interactions across dissimilar environments. Here, we report on the systematic tuning of the electrocatalytic activity toward the oxygen reduction reaction (ORR) via heterostructures formed by graphene modified with a metal underlayer and an adlayer consisting of a molecular catalyst. Systematic voltammetric testing and electrochemical imaging of patterned electrodes allowed us to confidently probe modifications on the ORR mechanisms and overpotential. We found that the surface configuration largely determined the ORR mechanism, with adlayers of porphyrin molecular catalysts displaying a higher activity for the 2e- pathway than the bare basal plane of graphene. Surprisingly, however, the underlayer material contributed substantially to lower the activation potential for the ORR in the order Pt > Au > SiO x, strongly suggesting the involvement of the solution-excluded metal on the reaction. Computational investigations suggest that ORR enhancements originate from permeation of metal d-subshell electrons through the graphene layer. In addition, these physically impermeable but electronically transparent electrodes displayed tolerance to cyanide poisoning and stability toward long-term cycling, highlighting graphene as an effective protection layer of noble metal while enabling electrochemical interactions. This work has implications in the mechanistic understanding of 2D materials and core-shell-type heterostructures for electrocatalytic reactions.

20.
J Chem Phys ; 148(6): 064707, 2018 Feb 14.
Article in English | MEDLINE | ID: mdl-29448784

ABSTRACT

Bilayer graphene (BLG) is a semiconductor whose band gap and properties can be tuned by various methods such as doping or applying gate voltage. Here, we show how to tune electronic properties of BLG by intercalation of transition metal (TM) atoms between two monolayer graphene (MLG) using a novel dispersion-corrected first-principle density functional theory (DFT) approach. We intercalated V, Nb, and Ta atoms between two MLG. We found that the symmetry, the spin, and the concentration of TM atoms in BLG-intercalated materials are the important parameters to control and to obtain a Dirac cone in their band structures. Our study reveals that the BLG intercalated with one vanadium (V) atom, BLG-1V, has a Dirac cone at the K-point. In all the cases, the present DFT calculations show that the 2pz sub-shells of C atoms in graphene and the 3dyz sub-shells of the TM atoms provide the electron density near the Fermi energy level (EF) which controls the material properties. Thus, we show that out-of-plane atoms can influence in-plane electronic densities in BLG and enumerate the conditions necessary to control the Dirac point. This study offers insight into the physical properties of 2D BLG intercalated materials and presents a new strategy for controlling the electronic properties of BLG through TM intercalation by varying the concentration and spin arrangement of the metals resulting in various conducting properties, which include: metal, semi-metal and semiconducting states.

SELECTION OF CITATIONS
SEARCH DETAIL
...